THE KEYBOARD LED LIGHT

I want to illuminate the leds in front before through keyboard when i-e 1 is pressed 1led glow when you press the other 2 led lights please refer to understand what is the function of surround block i m not able to locate palette functional .wat sortof outputs data (data input.vi acquisition) .This code pin r is in fact to monitor keys but my requirement is the keyboard LED glow how.

Well I tried, but I have problems and indicate the cut wire, I added the funcations as u said and what key presses and A poster to enum all at the same time I II in indicator but not actually done .please can help u with code

Tags: NI Hardware

Similar Questions

  • How to set my keyboard led lighting. Enable, disable, how long to stay on after the last shot. I had the functions to do this before or I've forgotten or lost abilities. And FN & Z do not work

    How to set my keyboard led lighting. Enable, disable, how long to stay on after the last shot. I had the functions to do this before or I've forgotten or lost abilities. And FN & Z do not work. I would have the size as a Properties window opens. It was about 12 tabs for different frunctions. «Please help me someone...» I would be grateful! »

    Hi Aldo,.

    What is the manufacturer, brand and model number accurate and complete from your computer?  What is the manufacturer, the brand and model of your keyboard?  We can not help you without more information on your specific computer.

    If you want to go faster, simply contact the Group technical support from the manufacturer of the computer or go to their support site and ask them or look for this issue.  If you provide us with the above information, we will go to their website and see if we can find the instructions (if we can) – and they will be able to do it faster and better than we can.  The choice is yours.

    I hope this helps.

    Good luck!

  • Open DMX to control the RGB LED lights

    For a demonstration, I would like to order by DMX RGB LED lights.

    I have a compatible open USB2DMX cable DMX (made by JMS but similar to ENTTEC) based on FTDI interface.

    All the necessary drivers are available and everything works with for example the Freestyler.

    LabVIEW can communicate with FTDI interface using the provided by FTDI Labview examples, but the DMX control does not work.

    Someone at - it experience with Open DMX and USB2DMX communication in Labview?

    Best,

    Rudolf Sprik

    Dear Stephen,

    I thank very you much for your message on our forum. You have configured the device to the MAX? Please see the following KB on this topic. I have no experience with this material, but if you post the driver as well as an example, I can take a look. Ultimately, it is an equipment series problems. It's a little more complicated, I don't have such a device, but I hope that I can give you valuable tips.

    Best regards

  • Dell vostro laptop 1540, he does the power LED light really, he ran over by a car

    I have a laptop dell 1540 he don't really connect the supply lights, I guess that flickers on and off voltage and the led on the hard drive did the same thing to

    the hard drive is clicking on screen remains black, that nothing comes, or whatever it is, I have a new motherboard and a new screen put because

    He ran over by a car I don't know if it's the hard drive or what it is can someone please help thanks

    Hello

    Looks like you need a real computer store (the one that is internal
    service on Dell laptops) or Support of Dell. Not a lot of laptops could survive being
    crushed by a car so he can be ready for the scrap.

    Dell support
    http://support.Dell.com/

    Dell support drivers - product manual & warranty Info (left side) - and much more
    http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

    Dell forums
    http://en.community.Dell.com/forums/
    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • BlackBerry Smartphones LED light

    The Green LED light flashing all the time keep, I tried to change the battery and disconnect the Bluetooth connection without difference. When I turn off the Mobile off connection, the light is off! someone has an idea?

    Thanks in advance.

    Go to the Options - screen/keyboard

    flashing 'Coverage led' on 'Off '.

    Save the settings.

  • Keyboard led to settings on Qosmio X 70

    Hi guys and girls
    Just got a new TOSHIBA Qosmio X 70. Is it possible to make the keyboard back light stay up?

    Thank you very much
    Lee

    The backlight on the keyboard can be changed in the settings of the BIOS as well as using the key combination FN + Z (or Fn + Y according to the keyboard layout)

    You can choose between the keyboard backlight options: timer, on and OUTSIDE

    You will find here more details:
    [How to enable and disable the backlight for the keyboard on Toshiba laptops | http://aps2.toshiba-tro.de/kb0/HTD2603CL0000R01.htm]

  • Satellite L655-11 t - backlight the keyboard power switch?

    Hello

    Just bought the L655 - 11 t for parents and they say when they went it they would insist "fn" key and the rear lights of the keyboard would light up, but now that I'm here, it no longer seems back light?

    The Satellite has a feature of keyboard illumination on/off button?

    thanx

    Who told you that?
    I m not 100% sure, but I think your L655 doesn't have keyboard with backlight.

    By the way: all laptops with this feature have additional options in Toshiba HWsetup.
    How do I check this?
    Open Toshiba Assist > optimize > HWSetup. There must be some keyboard Options tab where you can set how it works.

  • My Sony Vaio model PCG - 61611L Green LED lights up but nothing happens

    When I turn on my Sony Vaio model PCG - 61611L, the Green led lights up, but nothing goes well. The laptop is 2010 and is never abused, so I don't know what happened. It just started this making times and now I can't turn it on at all. Any suggestions?

    shoemanfl,

    It seems that you have no POST issue.  Is it the caplock/numlock light up when you press it?  Did you try to connect to an external monitor to see if it's a matter of display dim?  If this is no a POSITION, try reinstalling the ram or using one at a time... you can also remove the optical drive and hard drive to see if you can start any found nail system.  If you can not always unity would require service...

  • Backlight on the keyboard for Dell laptop does not work.

    I have a Dell Inspiron 17R SE and the backlight on the keyboard stopped lighting upward. Keyboard shortcutis "FN + F6" but that doesn't work either. I need to know how turn them back on.

    On many laptops Dell I've owned, the shortcuts to activate backlight switch is Fn + CursorRight.
    You can try this key combination?

    In addition, the backlight of the keyboard can be disabled in the BIOS. This is the menu that you get when you press F2 for when your laptop is cold-start and displays the Dell Logo and a progress bar under. If it is disabled, there is no way you can use a shortcut to turn on, you will need to enable it in the BIOS OF THE first.

  • After turning on my wireless keyboard led green lights, then begins to blink, and then turns off. The batteries are fresh.

    After turning on my wireless keyboard led green lights, then begins to blink, and then turns off. The batteries are fresh.

    Possible explanation.  It is likely that batteries, so fresh, can be irregular in size.   The uncertain connection would therefore tend to lead to a failure to blink and you declare.   Read my thing...

    Batteries.

  • How to turn the light on the keyboard on Satellite A300

    Hey guys...

    I bought this Satellite A300. For some time and am experiencing this problem of rediciolus.
    I couldn't turn on the light of the keys on the keyboard...

    Please help me guys.
    I have everything working in the dark... thnx

    Hello

    Do you mean Toshiba buttons and lights touchpad?
    You can enable it in the BIOS.

    There is an option called LED lighting. Turn it on!

    In addition, you can activate it enabled or disabled in the hardware configuration of Toshiba. There is a tab named Illumination. Here you can se this option on and OUTSIDE

  • Satellite A500-149: how to turn the lights on the keyboard?

    Hello

    I bought the Toshiba Satellite A500 149.
    How do I activate the keyboard light? I try FN + Z and nothing... no lights on the keyboard!
    Can anyone help?
    I need to install anything to make it work?

    Toshiba Satellite A500-149 part number: PSAM3E-02K00DEP

    thnks

    Hello

    You must press the button on / off LED, which is part of the multimedia buttons of Toshiba. This button must be placed in the line where the other buttons such as play, pause, volume up and down are placed.

    So the light must be turned on. Then, you can set the backlight on the keyboard to Auto.
    Then the keyboard would hit any key.
    When you use FN + (keyboard sign (Z)), keyboard backlight turns off / Alternatively

  • Impossible to activate the keyboard on my Satellite Pro L50B light

    I have a L50B Pro Satellite and I can't light the keyboard lights up. Can someone tell me how to do what you please. This model was $ 1,600 there probably a light support. FN - There does nothing.

    Also I can not drive how to turn the webcam on...?

    Check the BIOS settings please. Less advanced > system configuration you can find the option to enable/disable webcam. Check please if your webcam is properly enabled.

    You can also find "Keyboard Backlight Control Mode" option. ry, please change these settings in the BIOS directly.

    By the way: do you use the original pre-installed OS that you got with your laptop?
    Other FN keys work correctly?

  • Qosmio X 770-key malfunction - Mute instead of lighting on the keyboard

    Hello everyone

    My Qosmio X 770 - 13 c drives me crazy, let me explain:
    When I want to use the light of the keyboard that makes silent sound and I don't understand why.
    The FN key only works when I have reactive flash cards.
    All my drivers and BIOS are up-to-date. What should do?

    Somehow I think that caused this last update of Windows.
    Thanks in advance for your answers

    + The message was edited: assignment has been translated.

    Multimedia keys are controlled by Toshiba, additional package.
    Visit the page of the Toshiba UE driver and download the last PPV.
    Now uninstall the installed VAP.
    Reboot the laptop.
    Install the new downloaded VAP

    Welcome them

  • Satellite A300-1NO - webcam does not work, but the LED lights

    Hello!

    I have a laptop Satellite A300-1NO, with Win 7 installed. My problem is that my webcam does not work always, when I want to use it. Sometimes, it works perfectly in Skype, WLM etc... but sometimes I see a white or a black screen with a 'loading circle' in there. Blue is the LED light, I can see it in Device Manager too, but there is no picture, just 'loading '. I tried to uninstall the driver and then reinstall it, I installed the new "camera Assistant for Toshiba", without success.

    Is there any solution for this?

    > Is there any solution for this?
    I put t think there is solution for this. If I understand you right there is a problem with software pre-installed. It is not easy to say why this is happening.

    I have Satellite A300 too and use it with Win7 32 bit. Webcam works fine all the time.

    One more thing: have you noticed this problem in the first moments after installing Win7 or later?
    Have you installed something that may be the reason for this?

Maybe you are looking for

  • Office 2008 for migration Entourage of Mac Mail/Calendar/Contacts

    I have worked online with a nice guy from Apple tech spt migrating my e-mail client, Office 2008 for Mac: Entourage, at the post office.  We are unable to find a way to export the content of my Entourage folders and emails it contains in the e-mail c

  • Can not install XP pro___

    I was running xp family on my computer, but one day, he does not start, so I went on ebay, received an xp pro oem cd, tried to install it on top of xp family, but it simply does not work. I bought a new HD disk to install xp pro on it, but it also ha

  • Windows 7 32 bit Windows Update error 8007000e

    Dear Sir. We try to update windows, but there is error "registration for the service is missing. Windows Update, 8007000e error so thanks for giving me help how to solve this problem

  • Oracle 10.2.0.5 32 bit running on 64-bit

    Hi guys,.10.2.0.5 Oracle 32-bit on windows 64-bit.Oracle allows > 4 GB of memory, because my windows is 64-bit? Or it is limited as the 32-bit software?Thank you.

  • Adobe InDesign CC, error starting alert Plugin

    I packed CC 2015 design tools using the last PCB for OSx.Opening message InDesign install poster several errors related to InCopy plugins:error messages are displayed on the missing plugins:InCopy Bridge UI. InDesignPluginInCopy Bridge.InDesignPlugin