Module cvirte.msm is not found

Similar Questions

• module ivuxoqoya.dll is not found

  On startup, I get this error message with a "appdata".  I cleaned my disk and it still appears and a drive next to my pointer just keeps turning.  The full message is the module ivuxoqoya.dll is not found

  This forum is for posting comments on the web site of Microsoft Answers, is not for technical questions.  Post your question in the forum Windows here: http://answers.microsoft.com/en-us/windows/forum

  It sounds like malware to me.  This module is not part of what Google can locate.

• Module DLCDtime.dll is not found

  the run window opens and the \3\DLCDtime.dll module is not found in the message, WIn XP
  Added Office 2010, such as changes in software only.
  THX

  Hi PaulW6568,

  1. Did you the latest changes on the computer?
  2. Exactly when you receive the error message?
  3. What is the complete message, you receive the runtime error?
  4. You have security software installed on the computer?
  5. You have a printer connected to the computer Dell?

  Method 1

  If you have any printer connected to the computer, then I suggest that you uninstall and reinstall the latest version of the printer driver by visiting the site of the printer manufacturer and check if it helps.

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658

   

  Method 2

  Check if the problem persists in safe mode and post back with the results.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Method 2

  If the problem does not persist in safe mode, then it is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you configure the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. Click Start , and then click run.
  2. Type msconfig , and then click OK.
     The System Configuration utility dialog box appears.
  3. Click the general tab, click Normal Startup - load all device drivers and services , and then click OK.

  When you are prompted, click restart to restart the computer.

• module 'missip32.dll' is not found

  I tried to fix problem with turning on Windows Defender... my last attempt to save DLL files came iup with "module missip32.dll failed to load."  Make sure the binary is stored at the specified location, or debug it to check for problems with the binary or dependent .dll files.  The specified module could not be found.        Can someone guide me through this procedure please.  I don't know where to start.  Thank you and it's really appreciated.

  Hello

  Were you running "step 2: If the System File Checker tool cannot repair a file" of http://support.microsoft.com/kb/929833?

• When Vista starts, getting the error "Error loading C:\Windows\system32\sshnas.dll this module specific point is not found"

  When I start my PC it opens as soon as my desktop appears on the screen, error loading C:\Windows\system32\sshnas.dll the specified module could not be found.  How can I fix it?
  * original title - need HELP, Windows System 32 error *.

  Hello

  who is / was malware or a boot remains for her entry

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If the error persists after scanning use this program to out startup

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more.

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

• "module specified fixmHost.dll not found" error starting and error 0x8007054F during the update to itunes.

  Original title: error messages and the resolution.

  My question is twofold.  First of all, when I start my computer, I get a message that says "fixmHost.dll specified module could not be found.  I tried to restore my computer, running Vista several times, but I still get the message.

  The second question I have is when I tried to download a newer version of Itunes.  This error is a bit more complicated.  It reads "an error occurred during the installation of assembly Microsoft.VC80.CRT, version = 8.0.50727.4053, type = win32, public key token = architectures, processes or the 1fc8b3b9a1e28e3b ="x 86".  See Help and Support.  HRESULT: 0X8007054F.  Someone else has experienced this problem and how they have solved this problem?  Thank you very much.

  Hi nani318,

  DLL files allowing communication between files and devices, so that they obey orders. For example, a DLL under Windows Vista will enable communication between an executable file and a device, such as Microsoft Word and a printer.

  Use the (SFC.exe) System File Checker tool to determine which file is missing and try to recover the missing file.

  SFC scan
  http://support.Microsoft.com/kb/929833

  And issues with Itunes, you can follow the steps below.

  Step 1:

  Download and install Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package ATL Security Update

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=766a6af7-ec73-40ff-B072-9112bab119c2&displaylang=en#Filelist

  Step 2:

  (A) uninstall all software iTunes program and features.

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

  (B) if that does not completely remove iTunes, you can follow the steps mentioned in the article.

  Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7
  http://support.Apple.com/kb/HT1923

  A similar question was considered in the Apple forums.

  http://discussions.Apple.com/message.jspa?MessageID=10526839

  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• error on startup: "error loading ozujufuxuzedesuv the specified module rundll32.exe is not found."

  I only get the error at startup code. "error in loading rundll32.exe ozujufuxuzedesuv the specified module cannot be found"

  You have a virus or other such pest or it could be the remnants of a pest that has been deleted by your AV software  Run a Malwarebytes and SUPERAntiSpyware scan on your machine and see if things change.

  http://www.Malwarebytes.org/
  http://SUPERAntiSpyware.com/

  John

• module of compact field not found in max point

  I have a CFP-2120 and 8 rear slot plan. Module what ever, I put in the 8 slot THAT MAX can't find it. I swapped back them plans and 2120 controllers, but the problem remains. I add the device in MAX and try to configure it manually I get the message "the device is in offline mode" for this add-on. The lights on the module that I put in the slot 8 are in green.

  MAX 4.6 version

  LV 8.6

  Field point 6.02

  I suspect I'm missing something simple, but I can't.

  Thank you

  Take a look at this article.

  I cannot detect Slot 8 in my Compact FieldPoint basket fund

• I get an error message RunDll module 'wgsdgsdgdsgsd.exe' is not found. What does that mean? Where can I find the statup line which refers to this module?

  This message only appears at startup (resarts or normal startup) and just close it all can work (apparently) very well.

  Assuming that when you close it message your computer works fine, there is probably something in the routine to start looking for this file. When I updated my antivirus AVG, they had a free trial of a utility that scans your computer and corrects errors such as something poining to a lolocation that does exist (because you deleted the infected file).  I think it's how I solved the problem on my computer, but I don't know what it was.  Good luck.

  Jim Lago

• Satellite A105-S2051: common Module not found. This configuration will be terminated

  Hello

  I installed Windows XP but when I try to install any utility (like the Hotkey Utility) I get the message:

  TOSHIBA common Module not found. This configuration will be terminated.

  I can't find the "Toshiba ACPI common Modules for Windows XP" on the Toshiba web site. I tried the web site in English,

  I tried every single link in the support for the Satellite A105-S2051 page.
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_sc_home.jsp

  There is nothing like the Module 'common '.

  I have lived a great incredible waste of time while searching for the reader.

  So please, any help would be welcome.

  Hello

  I found Toshiba ACPI common Modules for Windows XP (Toshiba value-added Logic Device) in some different sets of Satellite A105.

  For example: A105-S271 A105-S2711 A105-S361 A105-S3611, A105-S2719, A105-S2712, A105-S2713, A105-S2716, A105-S2717

  Go for no apparent reason the A105-S2051 is not there.

  However, try the Toshiba ACPI common Modules of different A105.

  Maybe the latter won't work.

• Satellite L300 - 11L - TOSHIBA common module not found

  Hello
  I have a model Satellite L300 - 11L
  I try to install the operating system XP drivers
  Hotkey utilities for display devices
  I have an error pops up: "TOSHIBA common module not found!" This configuration will end. "

  I ask you to help and support.
  Thank you

  Hello

  I think the error message is quite clear.
  Common modules driver is not installed and so you cannot install the Hotkey utility.

  The common Modules is a crucial driver to be installed at the beginning!

  Therefore, you should visit the European driver of Toshiba. Need to select your model laptop and download this common Modules.
  Install it and then repeat the installation of the Hotkey utility.

  See you soon

• module not found wireless (701)

  Please, help me to solve this problem.
  After that I did the diagnostic system, I get message "wireless module not found (701).
  and when starting my laptop, the screen just showed HP logo and start back to the HP logo.

  Hello

  Please try this.

  Disconnect the power sector and battery that no accessories must be connected to your laptop. Then press and hold the power button on your device for 15 to 30 seconds then plug the battery & power checking if the unit works fine.

  If you are comfortable with reinstalling the wireless card that will be on the rear panel of your device you can try this steps as well.

• nilsdev - nimdbgk Module not found

  Hello

  I just installed a PCI-6509 and NOR-DAQmx 8.0.2 on SUSE Linux. I intend to use the ANSI-C drivers in a C++ application. I have not installed LabVIEW.

  I started working my way the Configuration Guide, mainly to check that I had installed everything correctly and have reached the point where nilsdev is executed. On the surface, everything seems to install OK.

  When I run nilsdev I get the following error:

  FATAL: Module not found nimdbgk.

  Is how important it?

  Of course, it does not nimdbgk, but it doesn't look like it has been installed.

  In usr lsmod | grep or returns

  nipalk

  Nation

  lspci is the map of NOR (but he seems to have the wrong number on, not sure if it is a problem)

  05:01.0 class ff00: National Instruments devices 7085.

  Part of LabView nimdbgk is why I don't have it?

  All you have ideas?

  Thank you.

  Hello

  I am not that kind of information officially, but I would speculate that it would be in version 8.9.

  «NOR-DAQmx added support for 64-bit user mode in NOR-DAQmx 8.9 (ANSI C) and NOR-DAQmx 8.9.5 (ANSI C, LabVIEW 2009 and .NET Framework 3.5).» This now allows the development of 64-bit application on 64-bit operating systems during development for a 64 bit (ADE) Application development environment. »

  The outputs by the trend that has occurred with Windows basic drivers, what would be my best guess.

  There are a few forum posts that indicate that people have had DAQmx working on x 64 systems, but with the extension of the - m32 for compilations, this isn't really 64 bit.  Unfortunately, the positions are open and do not contain really any resolution as such.

  For example this or that.  I just searched "DAQmx Linux 64-bit".

  I hope it helps a bit.  I'm sorry that I don't have a definitive answer.

  Kind regards

• I get the rundll error "error loading C:\WINDOWS\system32\vcnflrd.dll the specified module is not found."

  I get the rundll error "error loading C:\WINDOWS\system32\vcnflrd.dll the specified module is not found."
  I have Windows XP Professional, I installed Windows 7 and windows 8 and windows defender and avast antivirus scan and complete.  I did a full cleaning.

  Thank you

  I get the rundll error "error loading C:\WINDOWS\system32\vcnflrd.dll the specified module is not found."
  I have Windows XP Professional, I installed Windows 7 and windows 8 and windows defender and avast antivirus scan and complete.  I did a full cleaning.

  Thank you

  Hello

  you are fully updated? This means that the module cannot be found, what you want to do when you get this error? error codes >?

  check the reports on the problems and solutions

  You can do a support ticket, follow the link

  http://support.Microsoft.com/common/international.aspx?RDPATH=DM;en-us; Select & Target = support

  Microsoft product support has some tools that will be useful and can help to find a solution

  have a great day with OneCare Scan + 50 tips Windows 7even infected with the center of privacy? DELETE this Blog search & response threat Sysinternals Live Tools + TRANSLATOR+ Photosynth + Microsoft Security + Microsoft SUPPORT + Of Live Labs PIVOT + Microsoft Live Labs + Office 2010 beta + get Windows LIVE!

• Specified module not found: UNICOWS. DLL

  Cannot connect on MSN out of the blue. Error message "" specified module not found: UNICOWS. "." DLL.

  (2) MS technicians were not able to solve the problemm?

  Hello

  Remember to make changes to the computer before the show?

  You can uninstall MSN Messenger and download again.  This will help you solve the
  problem.

  How to change or remove a program in Windows XP
  http://support.Microsoft.com/kb/307895

  To reinstall MSN Messenger, follow this link:
  http://Windows.Microsoft.com/en-us/Messenger/home

  If this does not help, you can look after your query using MSN.
  https://support.MSN.com/contactus.aspx

  http://Messenger.MSN.co.in/help/