Module is trying to access a secure API - even after the signing of code

Similar Questions

• Error at startup < module > Module is trying to access a secure API

  Hi friends,

  I am trying to run the application on Blackberry. But it gives following error:

  Error starting Module tries to access a secure API.

  Can you get it someone please let me know why he comes. I searched the Forum, but not able to find what are the steps I need to take the next.

  To save the search:

  http://NA.BlackBerry.com/eng/developers/javaappdev/codekeys.jsp

  There is a tutorial on this and other options of signature here:

  http://NA.BlackBerry.com/developers/resources/A60_How_And_When_To_Sign_V2.PDF

• Module is trying to access a secure API - the reinstallation of Signature keys...

  Hello

  ATER, a problem that I have to reinstall my eclipse + jde plugin, as a result of this relocation, I also need to ask new .csi file in order to resinstall also Signature keys.

  After receiving 3 new csi files, signature keys has been successfully installed.

  Now, I have no problem when I run a ' build and sign Blackberry Widget Project ", that I get every time that a" SUCCESS BUILDING "result.»

  The problem is when I execute the widget on a real device, after the launch of the application whenever I get a "Module to access a secure API attempts" then the request has failed.

  Feature: Storm 2 9529 worm 5.0.0.306 (platform)

  For your information before my new installtion of the eclipse + JDE widget built with previous keys and the previous eclipse running on the same device that above.

  I did not change my source code, I try just to check if the application still running with the new keys and the new Eclipse + JDE.

  Does anyone have an idea what's wrong?

  Looks like you need another set of files of csi.

  Before installing your new keys delete all files sigtool.csk, sigtool.db and sigtool.set on your PC.  This will clear your previous code signing keys.

  So be sure to install each of the 3 csi files in the mansion even to make sure that all are installed in the same development tool.

• Error at startup myProject: Module "myProject" tries to access a secure API?

  Hello

  I cannot open the my request.

  It keeps loading for about 10-15 seconds (device stops responding)

  and then gives me this error:

  Error starting myProject:

  Module

  "myProject."

  attempt to access a

  Blocked API

  If anyone has an idea about this.

  Please help me in this matter.

  Thank you best regards &:

  Narendra Shekhawat

  probably you must sign your project. It is $ 20 for the keys, see here for more details:

  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800989/What_Is_-_Code...

• Error starting "appName": Module "appName" is trying to access a secure API

  Dear all,

  I downloaded a few applications in the app world. When I try to install on the device, there is an error "error starting Sunfish6: Module 'Sunfish6' trying to access a secure API. I tried to update the files, he needs, but still get the same error message. What is the cause of the appearance of the error message? I developed this application using phonegap and blackberry webwork framework.

  Thanks & best regards.

  In the eclipse webworks menu, select project-> BlackBerry-> sign with Signature tool.

  Then upload the generated files.

• Get 'Access denied' vCloud API client after the time-out period

  The .NET tool we build against the API for vCloud strike sometimes a timeout, which will essentially all subsequent calls (at least for the namespaces for example VAPP, Vdc and VM) fails with an access denied message. There is no doubt that this is because a timeout, because that happens only after a certain amount of inactivity.

  Now, I want to try and detect this "timeout" somehow and act accordingly, for example automatically trigger a disconnection and the client connection (instead of making mistakes). The other option is to have a thread keep alive session by calling some resources very, but really, I don't like the idea of ever having any connected clients.

  Any thoughts on how I can detect that the time-out has hit? I can't count on the fact that "Access denied" mean timeout...

  Thank you!

  / Stefan

  infinitesorrow wrote:

  It's a good suggestion, only that I do not directly use the services REST, but the VcloudSDK and the vCloudRestSchema DLL to in .NET... What would be the equivalent of/api/sessions?

  I'm not sure.

  I'm not a .NET programmer (and don't see anything useful in the .NET SDK documentation), but I don't know that the Java development kit has a RestUtil class with a method 'get' that runs on a URL specified by the arbitrary appellant that could be called "/ api / sessions" to do something in this direction in Java. The .NET development kit may have a similar utility class with such a method?

• module attempts to access a secure API

  Hi all

  I developed an application for blackberry, in the emulator its works very well

  I installed the cod/alx file in device it settle

  Open the application I get the error in my application: module "myAppl" trying to access a secure API.

  What could be the reason...

  Thank you

  Nithya.m

  Nithyam,

  There are APIs that have to sign of RIM to use on real devices. If you look at the API documentation, you can see the Sigened category. This indicates that you have to sign your application.

  To get the signature keys that you must spend 20USD and you can connect any number of applications for unlimited periods.

  PS: Sorry is in edit mode.

• Cod signed fails on the device with the attempts to access a secure API

  Feature: "BOLD"

  JDE: Eclipse (3.4.1) plugin (1.0.0.67) w/component pack 4.6.0.19

  JDK: 1.5

  Last week, I built and signed myApp. It loaded and run correctly on the device. This week changes have been made to the code, recompiled, signed and redeployed. Now, we get the attempts to reach an eveytime failure secure API that the code is executed. The secure API is PersistentObject and was last week.

  My last attempt, I deleted physically files .alx and .cod, .jar, .jad, .csl, .cso files prior to construction. I have verfied the 352 KB .cod size after compilation and 356 Ko after the signing. All of the code in the signature tool reflects signed. I even removed the .cod from the server where it is deployed and verified that everything is signed. We use the loader of office right now to load the code on the phone.

  EventLog

  S Java Exception - RuntimeException

  | Error at startup myApp:Module "myMod" trying to access a secure API.

  a system - error myApp:Module "myMod" from trying to access a secure API.

  a system - the linker error: "VerifyError" for myApp

  a system - Module 'myMod' attempts to access a secure API.

  a system - module 6803 cannot refer to net.rim.device.api.system.PersistentObject

  a system - VM:LINK myApp

  a system - CMM: myApp (6803) No sig 0 x 33

  a system - the linker error: "VerifyError" for myApp

  a system - Module 'myMod' attempts to access a secure API.

  a system - module 6803 cannot refer to net.rim.device.api.system.PersistentObject

  a system - CMM: myApp (6803) No sig 0 x 545252

  a system - VM:LINK myApp

  I never saw this when the cod file has actually been signed.  You can try to use javaloader to get cod off the coast of the unit and compare it with your signature.  Just a thought.

• Error: Attempt to access a secure API

  Hello

  I have a request, but when I run the application in the device, I get the following message:

  Error starting BBPlusSDKTest: module 'BBPlusSDK' trying to access a secure API

  the BBPlusSDK is a JAR file, and the BBPlusSDKTest is my main program.

  Inside my main program (BBPlusSDKTest). Apply an 'import' in the jar (BBPlusSDK).

  Initially, had problems with the Key RRT for the file BBPlusSDKTest.cod , but already completed the signing of this file.

  But now it shows another error message (trying to access a secure API).

  I use the tools following and device:

  (1) terminal Blackberry 8320

  (2) blackBerry JDE 4.5.0

  (3) Java JDK 1.6.0_14

  And also I read a few similar cases in the forum, but none of this has solved my problem.

  could someone help me with this problem.

  Kind regards

  I run the file of cod of the library with the signature tool.
  And is displayed with the status "signed".

  so, I have to sign another cod file. but still the error persists.

  by chance, the BlackBerry does not support this level of security of the operating system type?

  Kind regards

• Error startup Module attempts to access a secure API

  I had all three keys to blackbeery site and I managed to import them in eclipse...

  But when I run the application in the device. His displays this "Error Starting Module attempts to access a secure API".

  Can someone suggest how to solve this problem. Please help me for this. Thanks in advance.

  sign the application

• Says I don't have permission by trying to access a secure site, but can using windows Explorer

  While trying to access a secure site when I enter the password, I get (you are not allowed to message).

  I have reset my password. Without success. Contacted directly the password manager and reset the site with their help. Without success although they may open the site with my password. The site manager told me to contact you guys because there with Mozzilla Firefox.

  Tried to use Windows Internet Explorer without any problem.

  See also:

  • https://support.Mozilla.org/KB/fix-login-issues-on-websites-require-passwords

• trying to update my windows but it shows the found error Code 80070017

  I'm trying to update my windows but it shows the found error Code 80070017, I installed Microsoft fixit center to solve the problem, but the problem persists, in addition to this Windows Secuirty Center service is off please guide me how to do?

  Hello

  1. what day you're talking about?

  2. what Microsoft fixit you talking?

  3. don't you make changes to the computer before the show?

  Please follow the steps from the link below.

  http://support.Microsoft.com/kb/956704

• I can't access my user account even if the password is correct.

  I was not able to access my user account even if the password is correct. It happened to our 2 admin represents, so now we only use the guest user account.

  Hello

  Something must have corrupted these accounts.

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
  Mode has no default password (unless someone has changed the password so it should be available).

  These problems and similar bugs can help:

  A temporary profile is loaded after you connect to a Windows Vista-based system
  http://support.Microsoft.com/kb/947242

  How to fix error "your user profile was not loaded correctly! You have been connected with a
  temporary profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
  has been known to cause this problem.

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  Try these to erase corruption in the case where it plays a role.

  1. run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  2. start - type in the search - box COMMAND find top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  3. then run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------

  Other methods:

  Use the hidden administrator account to lower your user account (to the lowest level) APPLY/OK then go back
  and reset it to the Admin APPLY/OK - this clearly allows corruption. Do this several times. Do the same for others
  accounts that may be difficult. If necessary you can also reset your password in the accounts.
  Do not forget to leave your Admin account and the other to the desired level.

  Make another Admin account with your password and use it to fix the others if necessary. (just for
  repair, don't use regular account, not a safety valve) always keep a spare ADMIN account.

  DO NOT LEAVE THE ENABLED LSA OR USE DAILY. If it corrupts you are toast!

  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  You can run the Admin account hidden from the prompt by if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  If you cannot access your old account, you can still use an Admin to migrate to another (do not forget to always
  not that an Admin account that is not used except for testing and difficulty).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• For the third time, after re-installing Photoshop components 13, I tried to update, but every time I get the U44M1I200 error code that can help me?

  For the third time, after re-installing Photoshop components 13, I tried to update, but every time I get the U44M1I200 error code that can help me?

  U44... Update error http://forums.adobe.com/thread/1289956 can help

• You are prompted to install the security update even if the update is already installed

  I use a laptop which has downgraded from Vista Home to Windowx XP Pro w / SP2 (although maybe it's not relevant). Issues installing security updates through Windows Update before today have never known. I am prompted to install the update from a security XP KB956744, what I have done. I installed it through Windows Update and automatic command prompt directly. I even posted the update as something to ignore, but I am always prompted to install it. I also tried to uninstall the version on my machine, and then reinstall the update, but I am always prompted to install it.

  Two questions:
  1. because I received a prompt saying that it has been successfully installed and it appears in Add/Remove Programs, I can safely assume that it has been installed successfully even if I continue to prompt to install it?
  2. If my previous question is true, how can I window update to ignore this update even if I have already reported as such by the normal means?

  Thank you.

  Hello

  Go to add or remove programs and look for the KB956744-security update and remove it.

  Download the stand-alone package of KB956744-security update

  For XP 32 bit:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=d1f82d76-eeb2-4FF4-9d2c-46882f214719&displaylang=en

  For XP 64-bit:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5061615f-FA8F-465F-ac8f-393998b7e91b&displaylang=en

  Restart the computer and boot into safe mode by pressing F8 during the restart, and then press and selecxt safe mode.

  Install the downloaded file update in safe mode.

  All the best!