You are prompted to install the security update even if the update is already installed

Similar Questions

• you are prompted to install KB2509553, but get error 0x8024200D

  original title: you are prompted to install KB2509553, but get error 0x8024200D and no record of success to date in Add/Remove programs

  It is now the second time that we asked for ASSISTANCE for the exactly the same problem or a problem?

  We did a disk clean up and other tasks recommended in the first email response however it has not solved the problem?  We don't have time to spend hours on something and have no will of MSN?  Also, we have installed and run MSN fix and that did not work either?

  17/05/2012, you are prompted to install windows to date KB2509553, one on the successful 17/05/2012, six on 18/05/2012 successful, we failed on 19/05/2012

  and 3 successful on 19/05/2012, but when we check why so far failed us we raise error 0x8024200D and nothing for this date is reflected in our add/remove programs?

  I think there is a problem with that, so far as if it actually installed correctly it would not take ten 10 installs place same day KB2509553?

  Read this e-amil completely before answering and wasting my time telling me to do things I do every day by running Norton 360 version 6!

  Hi, Gordon J.RAVEY,.

  ·         Did you do changes on the computer before the show?

  ·         You are able to install other updates successfully?

  Follow these methods.

  Method 1: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Put the computer in a clean boot state to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click restart to restart the computer.

  Method 3: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.

  http://www.Microsoft.com/downloads/en/default.aspx

  Method 4: Follow the steps in the article.

  How to reset the Windows Update components?

  You cannot install some programs or updates

• Get the 8008 error when trying to watch Netflix and you are prompted to install Silverlight

  Hey everybody,

  Whenever I try to watch netflix error n8008 arises, which is related to silverlight. It is not a specific problem of the browser, I uninstalled silverlight and now whenever I try to watch a video I am prompted to install silverlight again and always, the installation fails. Any help would be greatly appreciated.

  Thank you!

  Hello

  1 did you changes to the computer before the show?

  2. When was the last time it worked?

  3. what version of IE are you using?

  I suggest you follow these methods and check.

  Method 1: Run the Silverlight uninstall program to remove settings from registry of Windows Installer and then reinstall Silverlight.

  To do this, please visit this link:

  How to clean a facility damaged Silverlight and then reinstall Silverlight?

  http://support.Microsoft.com/kb/2608523

  Registry warning: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, see this link: http://windows.microsoft.com/en-US/windows7/Back-up-the-registry

  See if that helps you to uninstall Silverlight on the computer. If you have managed to uninstall Silverlight, see the Web page below, and download the latest version, play Netflix and check if you receive the error message.
  http://Silverlight.net/GetStarted

  Method 2: Check the suggestions from the link next and if they help.

  http://support.Netflix.com/en/node/69

  I hope this helps!

• Lost emails after you are prompted to compact the account to save space

  original title: Aargh! Lost emails!

  I hope this is the right forum - cannot find a specific to Outlook Express, my mail server.
  I was asked recently to compact my emails, to save space and did.
  Apparently, I did not notice a check mark which allowed the removal of the most recent messages.
  Now, I've lost all those received & sent during the last 3 months. The before and after April-May are always accessible.
  So, how can I put on the recovery of the missing 3 months?
  Jump44

  1. Surprise! This is the right forum.
  2. Outlook Express is an e-mail client. Your e-mail server is where OE downloads the message of.
  3. There is no checkbox that allows the removal of e-mail.
   
  Two reasons the most common for what you describe is disruption of the compacting process, (never touch anything until it's finished), or bloated folders. More about that below.
   
  Why OE insists on compacting folders when I close it? :
  http://www.insideoe.com/FAQs/why.htm#compact
   
  Why mail disappears:
  http://www.insideoe.com/problems/bugs.htm#mailgone
   
  Recovery methods:
   
  If you are running XP/SP3, then you should have a backup of your dbx files in the Recycle Bin (or possibly the message store), copied as bak files.
   
  To restore a folder bak on the message store folder, first find the location of the message store.
   
  Tools | Options | Maintenance | Store folder will reveal the location of your Outlook Express files. Note the location and navigate on it in Explorer Windows or, copy and paste in start | Run.
   
  In Windows XP, the .dbx files are by default marked as hidden. To view these files in the Solution Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder options | View.
   
  Close OE and in Windows Explorer, click on the dbx to the file missing or empty file, then drag it to the desktop. It can be deleted later once you have successfully restored the bak file. Minimize the message store.
   
  Open OE and, if the folder is missing, create a folder with the * exact * same name as the bak file you want to restore but without the .bak. For example: If the file is Saved.bak, the new folder should be named saved. Open the new folder, and then close OE. If the folder is there, but just empty, continue to the next step.
   
  First of all, check if there is a bak file already in the message. If there is, and you have removed the dbx file, go ahead and rename it in dbx.
   
  If it is not already in the message, open the trash and do a right-click on the file bak for the folder in question and click on restore. Open the message store up and replace the .bak by .dbx file extension. Close the message store and open OE. Messages must be in the folder.
   
  If messages are restored successfully, you can go ahead and delete the old dbx file that you moved to the desktop.
   
  If you have not then bak copies of your dbx files in the Recycle Bin:
   
  DBXpress run in extract disc Mode is the best chance to recover messages:
  http://www.oehelp.com/DBXpress/default.aspx
   
  And see:
  
  http://www.oehelp.com/OETips.aspx#4
   
   
   
  A general warning to help avoid this in the future:
   
  Do not archive mail in default OE folders. They finally are damaged. Create your own folders defined by the user for mail storage and move your mail to them. Empty the deleted items folder regularly. Keep user created folders under 300 MB, and also empty as is possible to default folders.
   
  Disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the CPUs, slows down sending and receiving and causes a multitude of problems such as time-outs, account setting changes and has even been responsible for the loss of messages. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
  
  http://www.oehelp.com/OETips.aspx#3 
   
  And backup often.
   
  Outlook Express Quick Backup (OEQB Freeware)
  http://www.oehelp.com/OEBackup/default.aspx  

• Error on CC being corrupted, then you are prompted to install new who projects the same error

  I migrated my mac to another and the performance of the CC, I get an error that is damaged and must be reinstalled. When I reinstall, I end up getting the same message and the installation does not pass through. I'm sure it has something to do with the migration, but do not know what I have to empty to allow the installation again go through. Any ideas?

  DCarter-Wowtools that I recommend you try the steps listed in CC desktop lists the applications as "up to date" when the no facility not - http://helpx.adobe.com/creative-cloud/kb/aam-lists-removed-apps-date.html.  In particular, allow the application of Creative Cloud Desktop solution 2 should display correctly.

  If you continue to experience difficulties then you can consider going back to your new Mac with a clean install the operating system and copy only on your documents and settings.

• Firefox won't save passwords, will not be asked to save them. I have used this for 2 years +. I know where are the settings. New comp, Windows 7, Ffx 4. You are prompted to save the password 5 times and stopped so I ask everyone here if they have any sugg

  Why must you do this such a pain. 40 minutes, I tried to post this question.

  • Make sure that you do not run Firefox in private - browsing using Firefox without saving the story mode (permanent).
  • You enter private browsing mode, if you select: Tools > Options > privacy > History: Firefox will be: "don't forget the story ever.
  • To view the history settings and cookies, choose: Tools > Options > privacy, choose the setting Firefox will: use the custom settings for the story of
  • Uncheck the box: [] "automatically start Firefox in a private browsing session.
  • http://KB.mozillazine.org/Password_Manager
  • http://KB.mozillazine.org/User_name_and_password_not_remembered

• Vista - when you try to install SP2, you are prompted to install SP1 first

  I try to install Windows Vista Service Pack 2 (64-bit setup file complete downloadede) only becuse it says I must first install Vista Service Pack 1. If I try to install service pack 1, it says that it is already installed.

  When windoows up-to-date tried to install SP2, the error message was:
  ERROR_NOT_FOUND (0 x 80070490)

  This key, Open regedit.exe and goto:

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion

  and display the value of BuildLabEx

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• You are prompted to save the file when opening it

  Here is a new... I am trying to open a file and adobe asks me to save changes... when it is not still open!
  
  File does not open, and it is now corrupted.

  After searching solution... found this in the forum and now it allows me to open the file without saving it quickly... and I can see all the slides.

  Finally, I found that my user settings file was corrupted. I was able to overcome by following these steps.

  NOTE: You will lose your preferences - so make a note of them before to do. In addition, you will need to make sure you can see hidden files.

  1. close all instances of Captivate.
  2. check in the Task Manager to make sure that no Captivate.exe process is still running.
  3. navigate to C:\Documents and Settings\YourUserName\Application Data\Macromedia\Captivate
  4. rename the captivate_v10.dat in captivate_v10.dat.old
  5 restart Captivate (this will create a new dat file)

• I have an iPhone 6 and an iPad Air both have always been updated you are prompted and are therefore currently operating on 9.2.1. It just says: update could not be completed, and that was in the 11-15. I pay for extra storage if this isn't the issue...

  I have an iPhone 6 and an iPad Air both have always been updated you are prompted and are running 9.2.1. I can't get either do an iCloud backup, he repeats to me just last backup could not be completed. The last successful backup has been in November 2015. I pay for most large storage storage account is not the problem but, the fact I pay for cela and cannot use it is very frustrating = / I really need to get my backup iPhone I have a few important pictures there. I have read other posts, but nothing useful there. Is this a problem in one of the updates at this time or some other interferente app? Or? Thank you...

  Welcome to the Apple community.

  Please check that your device is correctly connected to the wireless internet (settings > wifi) and is plugged into a power source, check also that you have enough space in iCloud for your back upward.

  You can check the space available in settings > iCloud > storage and the space needed for the next backup to the settings > iCloud > storage > Storage manage > backups > appliance > Back Up Options > next backup size (wait for the spinning until the gear icon).

  Assuming that you are eligible for iCloud upward, you should try a forced first stop, hold down the buttons side in top and home together until the unit stops, then restart by pressing the side/up button.

  Then, try to connect the device to a new location (different WiFi network)

  If your backup continues to fail, you can try to disable the backup on your mobile device (settings > iCloud > backup), reboot the device and then turn on BackUp on new.

  If this help not disable backup again, remove your existing back to the top of settings > iCloud > storage > Storage manage > backup > this device (scroll down) > delete backup, restart the device and then turn on BackUp.

  If you are unable to make a return to the top, try to connect on iCloud (settings > iCloud (scroll down) > Sign Out (you will need to enter your password at this point), restart the device and sign in iCloud to settings > iCloud.)

  The next thing to try would be to restore your network settings. (Settings > general > reset > reset network settings)

  Reset your network settings will erase your cell phones and wireless network settings, including saved networks, passwords for wifi and VPN settings, that you can use. It will affect to the Internet but will not be an impact on telephone services because these settings are automatically configured by your carrier. It may take a few moments to enter again all your network settings, but it shouldn't cause you any major problems. If you are comfortable re - enter your network settings, you can try this step earlier in the troubleshooting procedure, i.e. after the forced shutdown suggested above.

  If this does not help, try to disable some elements for the back upward in a model to try to establish if your problem is caused by specific data on your device. You can do with settings > iCloud > storage > storage management > backup > appliance > Back Up Options.

  If you are still not able to perform a backup from iCloud, you can try to restore your phone which you should do by making an iTunes backup via your computer and restore from that.

  Be able to go back to the cloud can be very useful, especially if you have access to a computer or rarely have access to one, however unless you need specifically to use iCloud to go back, you'll find a backup on iTunes much more convenient and possibly more reliable. However if you save up to iTunes be sure to encrypt the back upward if you want to keep your data on health and passwords etc.

  More on v iCloud iTunes backup

• I tried to run the IE8 downloaded from Microsoft and I got this message: "the version of IE you have installed does not match the update you are trying to install." error no. KB2618444

  I just got my SP3 for my XP machine, I tried to start the download of Microsoft ie8 and I got this message:

  "The version of IE you have installed does not match the update you are trying to install." error no. KB2618444

  I'd appreciate any help that I couldn't solve this problem!

  Thank you!

  E-mail address is removed from the privacy *.

  Original title: error KB2618444setup

  I do not understand your question. Download IE8? Do you mean the installer for IE8? It's here.

  You try to install KB2618444? They make 3. For IE6, IE7, and IE8. You probably download one from a different version of Internet Explorer you have...
  I'm going to guess you really want that for IE8.
  That's it: IE8-WindowsXP-KB2618444 - x 86 - ENU.exe

• When I share HP LaserJet 4200 printer from a 64-bit Windows 7 computer and you are trying to install the driver, it says driver not found. * INI file missing

  Original title: Reader for printer HP LaserJet 4200 for Windows 7 gives problem

  My hp laserjet 4200n printer is connected to a print server of XP through the parallel port, when I share this printer from a 64-bit Windows 7 computer and you are trying to install the driver, it says driver not found. * INI file I already Miss down site fromhp driver loaded but invain.

  Please suggest

  Hi Mohammed Arif a. R,.

  You can try to plug the printer again and check the updates of Windows and see if the drivers are install.

  Install Windows updates in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/install-Windows-updates

  You can also view the following HP Web site and try redownloading drivers and check.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=84033&prodTypeId=18972&prodSeriesId=84028&swLang=8&TaskID=135&swEnvOID=4063

  Also check out the following link and try the suggested steps.

  Network printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

  Note: This article also applies to Windows 7.

  Hope this information is useful.

• Unable to connect to oracle DB using VBA and you are prompted with the error:-the client components and Oracle network have not been found. These components are supplied by Oracle Corporation and are part of the Oracle Version 7.3.3 or installation of the

  Hello

  It would be helpful to me if someone can give me instructions on setting the version of driver or oracle client required to connect to the the Oracle DB using excel VBA

  My config: -.

  Windows - 8-64 bit

  Excel 2013-32 bit

  The components of the client / I should install, and how to solve the question below...

  I tried the VBA code... but you are prompted with the error message above

  Void Oracle()

  Con Dim As ADODB. Connection

  Dim rs As ADODB. Recordset

  Dim query As String

  The con value = New ADODB. Connection

  Set rs = New ADODB. Recordset

  strCon = "Driver = {Microsoft ODBC for Oracle}"; "." & _

  "CONNECTSTRING = (DESCRIPTION ="& _.

  "(ADDRESS =(PROTOCOL=TCP)"& _

  "(HOST = HostNumber)(PORT=PortNumber))" & _

  "(CONNECT_DATA = (SID = SIDNumber))); UID = username; pwd = password; »

  con. Open (strcon)

  If err. <>Number 0 then

  MsgBox ("Oracle error:" & vbCrLf & err.) Description)

  On the other

  MsgBox ("Oracle DB Connection successful.")

  End If

  End Sub

  I'll replace it with the values of host origin...

  Thanks for the suggestion you till u gave...

  complete solution is in the link below...

  https://itkbs.WordPress.com/2014/07/28/how-to-install-ODBC-driver-for-Oracle-in-Windows-7/

• The version you are trying to install is not the most recent version

  I have multiple snapshots of it. I'm trying to install Adobe Flash Player on a computer of Windows7 64 bit on adobe.com. I get the following error:

  The version of Adobe Flash Player ActiveX that you are trying to install is not the most recent version. Please visit (adobewebsite) for the latest and most secure version.

  This is the message I get from the Adobe.com site!

  I tried to uninstall several times + reinstalling, same error. I tried to install it in offline mode, same error (is not the latest version).

  Help?

  Have you installed the beta version of Flash Player 10.1 at any time before?  If so, you need to uninstall with the uninstaller 10.1 using the -force option.

• You are prompted for the startup disk after PC Backup

  I want to back up files to an external hard drive (my hard drive is a FAT32 file system), I wanted to save on my removable hard drive from WD, but the program would not let me do this.  I discovered that I could put it in a drive on my computer I've ever used.

  So I used the feature to backup all the files on the computer.  After 3 hours, the program prompted me to put in a 3.5 diskette formatted as a boot drive.  (I had everything that I have is a flash drive.) He wouldn't let me change to my flash drive.

  Lost all my info? How can I use this return to the high back, now?

  Help, please

  What is your goal? A single backup? Regular backups? You want to save your data ONLY? Or you want to back up your ENTIRE system?

  I know there are a lot of questions, but it is important to know what it is you want to do!
  In the meantime, change the file system of your external hard drive from FAT32 to NTFS:

  Convert FAT32 to NTFS in Windows XP:

  • Click Start-> Run
  • Enter "cmd" in the field of text labeled "Open".
  • Button click OK
  • If you want to convert drive D (d), enter the "flight d:" command in the command window, find the name of volume for the D: partition
  • Then enter the command "convert d:/FS: NTFS" to convert the partition D: from FAT32 to NTFS
  • When you are prompted, enter the name of the partition volume
  From:
  http://www.partition-tool.com/resource/convert-FAT32-in-Windows-XP-and-Vista.htm

• When I try to reinstall Windows XP I have this message: "the version you are trying to install is older version.

  Cannot install xp

  everytime I try to reinstall windows xp pro, I get "version that you are trying to install is older version.

  E-mail address is removed from the privacy *.

  How to do a clean install of Windows XP

  Start by changing the BIOS setting to start from the CD drive first.
  Then see below:

  Michael Steven: http://www.michaelstevenstech.com/cleanxpinstall.html
  more information: http://windowsxp.mvps.org/XPClean.htm
  and: http://www.theeldergeek.com/clean_installation_of_windows_xp.htm
  also: http://www.bootdisk.com/

  Also, make sure you have the drivers you need for your mother, video card
  card, sound card, etc.
  Try Belarc Advisor: http://www.belarc.com/free_download.html
  He did a good job of providing a wealth of information, including key software codes
  and you will need drivers for devices.

  If you perform a clean installation on an existing PC which has XP already installed:
  Check your code CD Key corresponds to what Belarc Advisor reports to your existing installation.
  Note: Windows OEM installs usually come with a sticker on the PC or laptop and may not match the installed key factory.
   
  Note: A number of vendors now supply restore CD or a restore hard disk partition
  and, usually, do not provide a Windows XP CD.

  J W Stuart: http://www.pagestart.com