Says I don't have permission by trying to access a secure site, but can using windows Explorer

Similar Questions

• Unable to save the files to the desktop, the error msg says I don't have permission to do this and to cantact admin but I m user having admin status.

  IN WINDOWS 7, cannot save the files to the desktop, the error msg says I don't have permission to do this and to cantact admin but I m user having admin status. ALL SUGGESTED SOLUTUTION? THE FILE in question is created with ms word 2007. I can record on other places lik e in drive D: etc.

  I could open your Explorer of files and go to C:\Users\Vanbee (or any folder of your user name), then right click on the folder on the desktop it there and go to properties.  On the Security tab, make sure that you have a full control on the folder.

• I was installing CS6 and my internet was released for download and now it says I don't have permission to resume the download

  CS6 was download and I fell asleep so he was downloading as he said that it is 14 hours to download. Woke the internet was turned off in the middle of the download and now it says I don't have permission to resume the download. Help, please. I tried calling and no one could help that they said that I had to help me out here.

  Download applications download Creative Suite 6 again

  Free download. Download at any time.

  When the download is complete, install and then enter your serial number.

• Try to download CS6 Design Standard, halfway through but now says I don't have permission to access...

  I tried to download CS6 for resettlement, after my other laptop has been damaged.  The file is downloaded approximately 3.3 GB of 3.8 GB, but now will not continue any further because it says I don't have permission to access in the download bar... (I can't read the rest).  I did have the chance to enter my serial number, but either.  I'm sure that I was connected to the adobe Web site when I started to download the file too.  Any help?

  Available downloadable Setup files:

  • Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC, XI, X | 9,8 | 9 standard | 8 standard
  • Captivate: 8 | 7 | 6 | 5.5, 5 | 1
  • Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
  • Contribute: CS5 | CS4, CS3 | 3,2
  • FrameMaker: 12, 11, 10, 9, 8, 7.2
  • Lightroom: 6| 5.7.1| 5 | 4 | 3
  • Photoshop Elements: 13 | 12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
  • First Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• I can't move files on my external hard drive as it says I don't have permission.

  Whenever I have try and drag or copy and paste the files on my external hard drive it says I don't have permission. I know this isn't the hard drive because it works on other computers

  To give the control is a two-step process. Take ownership and then to give permissions.

  Owner of a file allows the owner to change permissions even if they do not have the authorization to do so. It's the only thing that made property. The person who creates an object owns the object. For admins, the objects that are created are the property of administrators, not the individual.

  You need start exploring as administrator to Start - All Programs - Accessories - made Windows Explorer right click and choose run as administrator.

  You must therefore make a right-click folders / drive, you are interested in tick - button Properties - Security - Advanced button - property - Edit - Replace owner on Sub containers and objects tab - select one user-then Ok your way of out.

  Right-click new - folder Properties - Security - Advanced - tab permissions - Edit button - select the account - check the two checkboxes - button - Advanced - Search now button Add button - select your tick - Ok button - total control in the list. OK your way out.

• Cannot delete a file, Windows 7 says I don't have permission

  I can't delete a folder. He says I don't have permission, but I am admin with full control on the folder.

  How to take possession of an item in Vista and Windows 7
  http://www.Vistax64.com/tutorials/67717-take-ownership-file.html

• I am an administrator with a password but win 7 refuses to perform a file saying I don't have permission, I have to do something more to be recognized by the system as admin__

  I am an administrator with a password but win 7 refuses to perform a file saying I don't have permission, I have to do something more to be recognized by the system as admin?

  rtzill,

  To activate the full administrative privileges with a normal Windows 7 user account:

  Open an administrative command prompt (right click; Run as administrator)
  Type "net user administrator activate: 'Yes and press ENTER."

  That should help him.

  Kwame Danquah Jr. V.P. [InfoTech - Infrastructure, comm., & security] | Bison MicroSystems Limited | #1 4th link Samoa | CF Estates | Box a 12685 | Accra - Ghana. | www.bisonmicrosystems.NET | InfoTech solutions |

• Credential Manager Windows says I don't have permission error code 0 x 80070005 access denied

  Credential Manager Windows says I don't have permission error code 0 x 80070005 access denied

  Hi violinplyer,

  ·         Exactly when you receive this error message?

  You can take hand the case of credentials in appdata & check if it helps. Follow the steps below:

  1. type %appdata%\microsoft\windows\sendto in the start search box and press ENTER. Browse to the location roaming\Microsoft\credentials.

  C:\Users\USER NAME\AppData\Roaming\Microsoft\credentials

  2. right click on the folder and then click Properties.

  3. click on the Security tab, click Advanced, and then click the owner tab.

  4. click on change. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  5. click on the name of the person you want to give to the property.

  If you want that person to be the owner of the files and subfolders in this folder, select the Replace owner of subcontainers and objects to check. Click OK.

  For reference:

  How to open a file if I get an access denied message?

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-open-a-file-if-I-get-an-access-denied-message

• How do I enter recorded meetings? When I click on the "meetings" tab it says I don't have permission

  How do I enter recorded meetings? When I click on the "meetings" tab it says I don't have permission

  Meeting records will have a direct URL, as well as meeting rooms and the content in Connect. You probably not a member of the host of the meeting or Group Admin group in this Connect account, so you do not have the permissions to access the library of the meeting.

  You will need either the host of the meeting room as you are looking for the registration you get the link and make sure you have the appropriate permissions to view, or switch the recording to the content library where it can be placed in a folder that you have viewing permissions.

• I have a similar computer is trying to access e-mail remotely, but can't get "display only".

  I have a similar computer is trying to access e-mail remotely, but can't get "display only".  I tried to set up the computer, I try to access, by typing gpedit.msc, and it comes with a screen that says the file cannot be found.  I then went to the BASE of KNOWLEDGE AND HE has TOLD ME to FOLLOW THESE INSTRUCTIONS

  1. Click Startand then click run.
  2. In the Open box, type mmc, and then click OK.
  3. On the file menu, click on Add/Remove a snap.
  4. Click on Add.
  5. Under available stand-alone snap-ins, click Group Policy, and then click Add.
  6. If you do not want to edit the Local computer policy, click Browse to locate the Group Policy object you want. Supply your user name and password if prompted, and then when you return to the Select Group Policy object dialog box, click Finish.

  But at step 5 when he said, under -ins autonomous available, click Group Policy, THERE has BEEN NO GROUP POLICY click

  So that you can see, I'm at square one.  I went to this problem 12 hours over a period of 3 days.

  I wish you help!

  See my response to your thread in the other forum in which you've posted. There is no need to post to several forums; It's just more work for people who are trying to help you. If you need additional assistance, please post in the other thread.

  http://social.answers.Microsoft.com/forums/en-us/xpprograms/thread/9910d218-7fb6-4821-8986-d2648a247dfc MS - MVP - Elephant Boy computers - don't panic!

• my security says I don't have permission it's my computer and it seems that I don't have permission

  I even tried to copy and when she is done copy says that I don't have permission to open the file from my external hard drive.

  It all started when I allowed someone to play games on my computer and my anti-virus dissappeared and got a virus I restarted my computer to an earlier time and I lost my pictures that are on my external hard drive for back and yet it doesn't let me do. I was just glad save my computer the last time, it crashed and I lost everything.

  Hello

  What operating system is installed on your computer?

  What version of the operating system Windows am I running?

  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

  You can run a scan complete antivirus on your computer.

  Microsoft safety scanner

  http://www.Microsoft.com/security/scanner/en-AU/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again. He also performs the check disk and you may lose the amount of data

  See also:

  Microsoft Security Essentials

  http://Windows.Microsoft.com/en-us/Windows/products/security-essentials

  What are the permissions?

  http://Windows.Microsoft.com/en-us/Windows7/what-are-permissions

  Troubleshoot "access denied" when opening files or folders

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-access-denied-when-opening-files-or-folders

  (For Windows 7)

• McAfee Firewall will stay not on; Cannot turn on the firewall of Windows 7; Computer keeps restarting; and I can't access a file because my computer says I don't have permission

  I use McAfee Firewall as my firewall.  Now when I try to turn it on, it continues for less than a second, then turns off.  Firewall Windows also not be.

  My computer rebooting in itself guard so I can't complete a virus scan.  In one place, he suggested I have try in Safe Mode, but it didn't work (and he told me that it did not work because I couldn't connect to the internet).  I tried "Safe Mode with networking" and he would not even let me scan.

  Another thing, the last time that I tried to scan it got stuck on "Internet C:\Windows\SysWOW64A\config\systemprofile\AppData\Local\Microsoft\Windows\Temporary / / Desktop.ini.  This makes me think that this could be the problem, so I tried to get him to put the file in "VirusTotal.  I was able to get to him before that I got the idea to put it in "VirusTotal" but now it won't let me and he says:

  "You don't have currently not allowed to access this folder."

  "Click Conitnue to have permanent access to this folder."

  When I try to click on "Continue", it only ever through.

  I tried to change the 'Owner' under 'Security' tab but it still doesn't work, so I can't check to see if the file is a virus.

  Should I try to download a new antivirus program to scan my computer?

  Sorry if this is in the wrong category.  I have so many problems, it is not easy to categorize.

  Uninstalling McAfee completely.

  Do not use any product that claims to make your computer run better.  Almost all of them are either false, themselves, an infection, or put your computer at risk. Delete everything that claims to be there to prevent the infections or pretends to make your computer work better, except for the singular than an antivirus product.

  It is a controversial topic, but your choice of AV software may be something you want to take a 2nd look.  I suggest you visit this website to get an idea of what AV software made the best work, depending on what type of user you are: http://www.av-comparatives.org/ is a non-profit that has been around for a long time and I hope that their results.

  When you interpret these results, remember the difference between a product that detects 95% and the other 99% of infections, it is actually 5 times more likely to allow an infection.

  I pick up after about 150 Windows PCs and I have more than 13 years.  Until last September, the only AV software that I would allow my clients to use was Norton Antivirus.  Note that this is not the same as any other product, Norton 360 or Internet Security.  My clients rarely know infections.

  Last September, Symantec (Norton owner) decided to no longer sell such a product.  After much research, I decided on Bitdefender Antivirus 2015 +.  I installed it on most of these PCs to date and has never been a problem, and it has been on a course of about 11 months now...  It is a better product than Norton.  It is also cheap. One of the things I love the most about it, is the silence and discretion.  Especially if silenced you its function "portfolio".

  My customers know that if they install any product of 'Internet Security', I won't work on their computers until it is deleted.  Very well, I learned the hard way that other components of these products (other than the AV itself) IS causing more problems than any profit that they bring and work mainly by stopping the Windows component that does a very good job of this particular task still.  The problem is that when I started to work on a computer with an IS on it, I could spend hours trying to diagnose the problem, only to find out that by taking the product of the IS, the problems have become much clearer and easier to solve.  I think that the product of the IS actually hides the problem.

  As I said, this is a controversial topic and you will find many different very strong opinions.  I know that mine is based on a fairly large sample over a long period, and are consumers of consumer type Windows.

  Please note.  You should never have more than one protection software installed.  Always make sure that you completely remove the firmware all protection before installing a new one.  That contains software that may have come preinstalled on your computer when it's new

  Totally impossible to delete most of all AV software simply by using the standard uninstallation tool Windows 7.  Most of the majors also publishes a "removal tool" that gets the rest.  If you do not completely remove it, it will cause very hard to understand and diagnose problems.

• Automatic Windows update cripples pc - error message says I don't have permission to do anything on my C drive

  After the update of windows install and automatic that I shut down my computer, I received the error message that there wasn't enough room. I canceled the installation and now nothing works.  I get an error message saying that I don't have permissions to do anything on my c drive. What happened only under my username, but I lost iTunes and can't access the Internet at all.

  Try to run the full scan of the system with:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  If your C drive is nearly full, run disk clean up and defragnment and uninstall programs that you might not want to go to add/remove programs or programs and features.

• When you try to run an .exe file, windows will appear with a warning saying I don't have permission to use the file... and yet I used it earlier that day and no changes have been made on the computer

  I'm a gamer, I play world of Warcraft. A week ago, the shortcut of this game that was created through disk began to have a popup alert indicating * Windows cannot access the specified device, path or file. You can not have the appropriate permissions to access the item.* thing is, it was working fine a few weeks ago and no changes to the computer or the security settings. So I created a shortcut using the .exe directly instead of that the game gives us. Now yesterday I've played, got off, went to practice, returned, and it was blocked. There are no other files (that I know) have this problem, it's the unique. I am running vista Home Premium service pack 2 of the of the window on a relatively new dell 32-bit processor. I have absolutely no idea as to what caused this... anyone have an idea? Thank you.

  Justanotheridiot,
  If you uninstall Norton, you can reinstall and your subscription will remain current.  Just make sure that you are using the Norton removal tool to uninstall.  You can find on their Web site.  You also mentioned McAfee on your system.  If you have not used the removal tool they provide that I suggest to go to get it and run it before removing Norton.  I heard about problems caused by one of these programs being not entirely removed by using only the normal uninstall option.

  Also if you have not already done, right click on the file that you run and choose "Run as Administrator" and see if that makes a difference. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I have a black screen, but can use windows on the bottom bar.

  I have a HP desktop computer and you are using Windows Vista Home Premium.  The Office has been black for about a month now.  Again, I have the windows at the bottom bar and am able to navigate in all my programs through the start icon.  The computer seems to work very well - and analyses have not found something unusual.  That's happened?  How can I recover my office?  I can't start my computer Safe Mode (by pressing f8) and I find not "Accessories" in my list of programs, but I could find 'system restore', so I chose a point of restoration about 4 weeks ago, but he has failed.  Can you help me!
  Thank you!

  I thought that the files have completely disappeared.  shortcuts were definitely missing.  When I went to "my documents" on the start menu, I could not find personal files at all.  It is computer of my mother and my brother came the next day and was able to fix it.  He said that he has restored the computer using "System Restore" and used a date prior to that I took.  He was able to restore the computer and found all the files.  I guess they were just hidden.

  So I guess that the problem has been resolved!  Thank you for your answer!