Module LaxyAbwe.DLL Failed to Load

Similar Questions

• Module 'mscomctl.osx' failed to load error.

  Original title: MSCOMCTL. OSX

  The problem is when I follow these steps

  cmd > run as administrator >
  CD C:\Windows\SysWOW64

  The command prompt should change to: C:\Windows\SysWOW64

  Then type:

  regsvr32 mscomctl.ocx

  nothings happen it won't work it says

  "'module' mscomctl.osx ' failed to load the

  
  
  Make sure the binary is stored at the specified path or debug it to check
  problems with the binary or dependent. DLL files.
  The specified module could not be found. »
  What should I do? Can someone help me? :(

  Hello

  I suggest you to copy the MSCOMCT2. C:\windows\sysWOW64 and not c:\windows\system32 OCX file.

  You can then follow the steps below to register.

  (a) click the Start button , and then in the" Search" box, type CMD but DO NOT press Enter yet.
  (b) in the list above, section "programs", then right-click on CMD that appears above and choose 'run as administrator' and click 'continue'.
  (c) in the opened window, type the following command and press ENTER:

  regsvr32 c:\windows\sysWOW64\mscomct2.ocx

  Write to us at the State of the question. We will help you to come.

• "The logon user interface DLL failed to load athgina.dll. Contact your system administrator to replace the DLL or restore the original DLL. "was my initial problem.

  "The logon user interface DLL failed to load athgina.dll. Contact your system administrator to replace the DLL or restore the original DLL. "It's my original problem due to uninstallation of a Netgear usb internet device programthen a friend got their hands on it: now, put on it goes to safe mode selection screen. the result options of safe in many hyper scrolling mode that reads - multi (o) disc (o) partition (1) windowssystem32drivers\ ___sys... then stops & starts up etc when in last known good config that worked or start normally the icons of windows screen is displayed every thing seems as it should, then it turns a shade of blue just 1/2 a screen of white lettering & bam his judgment in a Flash. Cannot read this fast.      XP sp3 Toshiba Satellite P305

  Hi chygirl,

  You can follow the solution at the bottom of the link:-
  http://www.GeeksToGo.com/forum/topic/270656-cant-boot-up-after-unistall/

• The logon User Interface DLL Masgina.dll failed to load?

  Hello

  My name is Shelley, I really honestly do nothing about computers and my computer at home, which is a dell with windows xp pro.   was working fine, then 1 morning I rose and ithad a blue screen with the message about it.

  The logon User Interface DLL msgina.dll failed to load.  Contact your system administrator to replace the DLL or restore the original DLL.         then she had a reset button to push.  When I pressed the button, the display cover Dell and then he showed the sreen of coverage of Microsoft Windows XP, then he can go right the message telling me that. The User Interface DLL failed.

  Now, my computer has been sitting there for 2 weeks, and no one can use it.  Now, I'm on my cell phone the school for 17 years.

  What should I take my computer in a store or is - something simple, maybe, I can do myself?

  OH and if you know, the computer is at my daughters school, they have gave to her, because she had really great classes and she's in schools IB program, so they gave him a computer to have at home, it is set up for academic use, I know not whether that counts or not.  She got a new laptop for Christmas. Other people in the House are now using the computer to play games and watch videos from YouTube.

  Can someone help me?   Thank you, Shelley

  Hello

  ·        You're able to boot in safe mode?

  ·        Remember to make changes to the system?

  Method 1:

  If you are able to boot into safe mode then I suggest to do a system restore to a previous point when the system worked very well and check.

  Step 1:

  I suggest to start in safe mode and check if the problem persists.

  a. restart the system and keep tapping F8 until you reach the start menu.

  b. Select safe mode from the list and press ENTER.

  Step 2:

  I suggest you do a system restore and check. Follow the steps mentioned in the article below.

  How to restore Windows XP to a previous state

  http://support.Microsoft.com/kb/306084

  I suggest you to consult the article below.

  "Logon user DLL Msgina.dll failed to load Interface" error after you have installed the MS04-003 security update

  http://support.Microsoft.com/kb/836683

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• my system is on the Frits - when it starts up it's a 'windows\system32\qcapk.dll' failed to load error

  Original title: my system is on the Frits

  I have windows xp media center. When it starts up it's a 'windows\system32\qcapk.dll' failed to load error. What should I do

  Hello Sayiwont65,

  Thanks for posting of Microsoft Answers!

  It appears from the description of your problem, you receive a that,"windows\system32\qcapk.dll error' could not load.

  I searched this dll file name and couldn't find any reference to it.

  This is the case, looks like it was caused by malicious software.  Please take a look at this thread that was answered by JoseIbarra.

  Let us know if that helps.

  Best regards

  Matthew_Ha

• glronwai.dll failed to load at startup.

  Original title: DLL file at startup, Windows 7 error

  Hello.  My Toshiba Satellite laptop is restarted, I get an error message: glronwai.dll failed to load, to the location: c:\Users\Sharon\AppData\Local\...

  I have Windows 7 Home Premium, version 6.1 (Build 7601:Service Pack 1)

  I ran mrt looking specifically at the local file and complete the analysis, nothing found.  I ran Wise Disk Cleaner and Wise Registry Cleaner.  My McAfee Security Center is in place, running, updated and scan detects no problem.

  Any other ideas?  Thank you very much.

  Hello Sharon,

  I appreciate the efforts to solve the problem.

  I suggest to start your computer in a clean boot, then check the issue.

  Put the computer to boot.

  Perform a clean boot to verify if any third-party application is causing the problem, as the clean boot helps eliminate software conflicts. Follow these steps in the link below to start the computer in a clean boot.

  How to perform a clean boot for a problem in Windows 8, Windows 7, or Windows Vista

  http://support.Microsoft.com/kb/929135

  Warning:  Please go through the section: how to reset the computer to start as usual after a clean boot troubleshooting section of Kb to start the computer to a normal startup after you fix the problem.

  Follow the steps below to perform a SFC scan on your computer to fix the problem.

  Follow the steps in the section "use the File Checker system (SFC.exe) to determine which file is causing the problem and then replace the file" from the link given below.

  Use the System File Checker tool to troubleshoot missing or corrupted on Windows Vista or Windows 7 system files

  http://support.Microsoft.com/kb/929833

  See the link given below for registry cleaner.

  Registry cleaners are needed?

  http://Windows.Microsoft.com/en-us/Windows7/are-registry-cleaners-necessary

  Write to us with the stats of the question. We will help you to come.

• Cannot install Webworks - Windows DLL failed to load - 10 Windows

  Hello

  Try to install 2.2 on Windows 10 Webworks but fails with this message:

  Flexeraawm$ aaa: cannot load Windows DLL
  at Flexeraawm.af (unknown Source)
  at Flexeraawm.aa (unknown Source)
  at com.zerog.ia.installer.LifeCycleManager.init (unknown Source)
  at com.zerog.ia.installer.LifeCycleManager.executeApplication (unknown Source)
  at com.zerog.ia.installer.Main.main (unknown Source)
  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
  at sun.reflect.NativeMethodAccessorImpl.invoke (unknown Source)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke (unknown Source)
  at java.lang.reflect.Method.invoke (unknown Source)
  at com.zerog.lax.LAX.launch (unknown Source)
  at com.zerog.lax.LAX.main (unknown Source)

  Any help is appreciated.

  There is a problem with the installer WebWorks and recent updates of Java on Windows 10 1.8.  The workaround is to use Java 1.7.

• GjpgPack\instrument.dll"failed to load Windows 7

  I have this window at different times and know how to solve this problem:

  RegSvr32

  Module: 'C:\Users\Jim\AppData\Local\GjpgPack\instrument.dll' could not be loaded.

  Makesure the binary is stored at the specified location, or debug it to check for problems with the binary or dependent file. Dll files.

  The specified module could not be found.

  Ron - what is a codec and how would identify him in a program that has been installed?      Since my computer seems to run smoothly anyway, how can I get rid of the window 'RegSvr32 '?    Thanks again for your help.

  Hello

  Codec:

  The codec name is abbreviation of coder-decoder, what does a codec. Most audio and video formats use some kind of compression, so that they do not take a huge amount of disk space. Audio and video files are compressed with a particular codec when they are created/saved and then decompressed by the codec when they are read.

  Codecs include. MPEG. AVI. WMV, DIVX. MP4, etc., etc., for video files and. WAV. AIFF. MP3, etc, for audio files. Codecs can also be used to compress media streaming (audio and video live), which makes it possible to broadcast a live audio or video clip via a broadband Internet connection.

  Codecs - Frequently asked Questions:

  http://Windows.Microsoft.com/en-us/Windows/codecs-frequently-asked-questions#codecs-frequently-asked-questions=Windows-7

  The result is that when you use a specific media file that was created using a particular codec, codec must be installed to play the video file.

  You should try to isolate what that you do, start a program, multimedia application, game, utility or another application when this error occurs. This will reveal the component that is causing the problem.

  You cannot "get rid" of the "RegSvr32" (Microsoft Register Server). The .dll or components ActiveX installed in Windows use this component to record the .dll (Dynamic Link Library) file in Windows before it can be used.

  How to use the Regsvr32 tool and solve the Regsvr32 error messages:

  http://support.Microsoft.com/kb/249873/en-us

  Let us know if you have any other questions.

  Concerning

• Version 4.2 (1) build 15 Patch 4 - module SchemeLayer.dll failed

  Hi all

  For the last day little I am getting the following error on one of my servers CSA.

  "Reporting queued error: failed application CSAdmin.exe, version 0.0.0.0, module failed SchemeLayer.dll, version 0.0.0.0, address of 0x0002c370 fault.

  It running on windows 2008 32 bit - dedicated server. The antivirus protection is defined to exclude this directory.

  Train a last search it seems that this could be one of the Microsoft patches the cause. -Does anyone know of this patch, it could be.

  I don't have this issue on my 3 other servers running the same configuration / patch levels...

  Hi Martin,

  Try to upgrade to the latest patch of GBA. If that has not solved the problem try to uninstall then install the patch + ACS (abackup before uninstall and restore after).

  If you are still experiencing a problem, I think that you may need to contact cisco for this. Developers may be able to identify exactly what is happening and narrow down the cause of this, until they find the process/windows patches that is the cause.

  BTW, have you tried to reboot the machine? or toggle the ACS?

  HTH,

  Amjad

  Rating of useful answers is more useful to say "thank you".

• Purbos.dll failed to load

  

  How can I recover this dll file. I don't know even how this program installed on my computer.

  Whenever I start my computer, the same message appears.

  https://TechNet.Microsoft.com/en-us/Sysinternals/bb842062.aspx

  Sysinternals Suite

  You might be able to track down the application with autorun

• On startup, I get the message «...\SilkSun-Libapr-1.dll FAILED TO LOAD' can you help me please?

  During the loading process, a screen appears with the message above. I just 'X' out and move. The computer works normally and I never this message, while the computer is now operational. For the last 2 months or more, while the computer is running. I went through a number of programs and never had a problem.

  Hi Pat,

  Were there any hardware or software changes made on the computer before this problem?
   
  You can follow the methods below:
   
  Method 1:

  Follow the article below to make the clean boot:
   
  http://support.Microsoft.com/kb/929135
   
  Important: third party software will be disabled in the startup.

  Method 2:

  Run a virus scanner (Microsoft Security Scanner).

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Important: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Method 3:

  You can use the utility auditor system by following files:

  http://support.Microsoft.com/kb/929833/en-us

  I hope that this information will help you. Please let us know to get help.

  Thank you

• module 'missip32.dll' is not found

  I tried to fix problem with turning on Windows Defender... my last attempt to save DLL files came iup with "module missip32.dll failed to load."  Make sure the binary is stored at the specified location, or debug it to check for problems with the binary or dependent .dll files.  The specified module could not be found.        Can someone guide me through this procedure please.  I don't know where to start.  Thank you and it's really appreciated.

  Hello

  Were you running "step 2: If the System File Checker tool cannot repair a file" of http://support.microsoft.com/kb/929833?

• Computer Dell laptop/windows xp, got virus.tried to fix. BAD IDEA. ERROR: DLL msgina.dll UI winlogon.exe - bad image.logon failed to load.

  Computer Dell laptop of my husband has a virus that wants you to install a fake security program. I tried to fix it. OOPS. I tried to choose an earlier date to restore your computer to and I got zapped, crashed and burned. Error is now: winlogon.exe - bad image then the msgina.dll login user interface DLL failed to load, contact admin to replace the dll or restore the original dll. I don't have a boot cd. Is there a way of "back door" to get his computer works again?

  As you know now, do a restore of the system on a severely infected machine is not a good thing. Better to save the data and do a clean installation of Windows. You can try to do it yourself, but based on your post, which I would not recommend it. I don't mean to hurt your feelings, just to be practical. It would be better to take the machine to a competent local tech (not a type of BigComputerStore/GeekSquad of the place).

  If you really want to try it yourself, here's what you need to do:

  1. start the computer with Linux Livecd such as Knoppix. You are using Linux, copy the data files on an external hard drive.
  2. install Windows using the XP Dell installation CD.
  3. install all the drivers for Dell. Use the Dell Resource CD or get the drivers from the Dell advance website.
  4. switch to XP Service Pack 3 and do all the Windows updates.
  5. install a good antivirus - NOD32 (commercial), Avast or Avira (both have free versions).
  6. install all other desired programs, updated if necessary (especially if you have MS Office).
  7. analyze data saved with the antivirus before you copy it to the new clean install. MS - MVP - Elephant Boy computers - don't panic!

• Half-life 2 says failed to load the Launcher DLL specified module could not be found

  Failed to load the Launcher DLL:

  the specified module could not be found

  Hi Madoo17,

  Welcome to the community of Microsoft and thanks for posting the question. I've surely you will help find a solution on the issue.

  1. Once you get this error message?

  2. it worked before?

  3 did you changes to the computer before the show?

  Perform the steps:

  Method 1:

  Put the computer in a State of boot is a way to know which application is causing this problem.

  To help resolve the error and other messages, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  Step 1:

  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  Follow the steps in the link below to do the same thing:

  How to configure Windows XP to start in a "clean boot" State

  Note: After troubleshooting, be sure to set the computer to start as usual as shown here:

  Step 2: To configure Windows to use a Normal startup state

  After you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.

  a. Click Start and then click Run.

  b. type msconfig and click OK. The System Configuration Utility dialog box appears.

  c. click on the general tab, click Normal Startup - load all services and device drivers and then click OK.

  d. When you are prompted, click on restart to restart the computer.

  Method 2: Use the (SFC) System File Checker tool.

  SFC system gives an administrator the ability to scan the files all protected to check their versions. If the System File Checker detects that a protected file has been replaced, it retrieves the correct version of the file in the folder cache (% Systemroot%\System32\Dllcache) or the Windows installation source files and then replaces the incorrect file. System File Checker verifies and repopulates the cache folder also. You must be logged in as an administrator or as a member of the Administrators group to run the System File Checker.

  Check out this link to do the same thing:

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  Hope this information helps. Please reply back with the State so that we can help you.

• Caused _inlet in module BWCC.dll Segment load failure

  Tried again and again to load an application on Windows XP SP3 but I keep getting the following error: _inlet caused Segment failed to load in the module BWCC. DLL. I've tried everything I know to try, but I always get the samething.  The program is called ed-computer pc and is no longer supported, but I know that it can be loaded on XP because I know two other computers that it's on.  Can you help or give me any advice?

  Thank you

  Eric

  Try loading or installing the program in safe mode which may help.