module of rundll error message not found c:\program files\common files\paretologic\uuss2\uus.dll

Similar Questions

• Error in Windows XP by day make saying "RUNDLL error loading C\:Program Files\Fichiers Files\ParetoLogic\UUS2\UUS.dll"

  At 18:00 every day, I receive an error message that says: RUNDLL error loading C\:Program Files\Common Files\ParetoLogic\UUS2\UUS.dll the specific module could not be found.  I use Windows XP.  What is this and how can I solve this problem?  It does not seem to affect what anyone, I don't know, but I know it shouldn't be the case and would like to fix.

  I think they already know about this issue (and how to fix it) to ParetoLogic:

  http://www.utilitysoftwarereviews.com/how-to-remove-ParetoLogic-uusdll-error-message/

• I try to start the old T2150CDT - error message "not found reading drive C of the sector.

  Hello

  I came by one of them and trying to fire, but I get the message, "sector not found reading drive C". I get this message just after windows 98 logo appears.

  Problem is that I am limited in what I can do, because I don't have a floppy drive and back does not recognize the CD drive (missing drivers); Although I can hear it when starting upwards.

  So I out the HARD drive and pasted the installation windows 98 inside files. then tried to reinstall, but I still have the message of "sector not found reading drive C". The drive is too large (it's about 2.1 GB.)

  Install the right drivers for the CD Rom would allow me to install from a CD?

  It works usually
  Thank you
  John

  As far as I know the error message; "Sector not found reading drive C" appears because of these three reasons:
  -physical HARD drive failure
  -corrupted HARD drive file system
  -Bad RAM

  In the first case, you should try to format the whole HARD drive and should try to install the new OS.
  If it will not help, chances are that HARD drive is malfunctioning and needs to be replaced.

• When I open Yahoo Messenger I found error message not found libreyre Dynamics

  Hello

  When I open yahoo Messenger, I found error messege,

  ? Get mem journal object@@ygpavc memory loge@xz not found

  Hi Novinovi,

  1. What is the full error message you get?

  2. are you facing this issue only when you try to open Yahoo messenger or with other programs also?

  3. did you of recent changes on the system?

  If you are facing the issue only when you open Yahoo messenger, then you can try to uninstall and reinstall the same check.

  For more information you can check the support of Yahoo at following link:

  Uninstall and reinstall Yahoo! Messenger on your Mac or PC

• Windows xp not loading, which gives an error message not found rpcrt4.dll

  When I try to restart the computer, it acts like it is trying to load windows then gives me an error message as rpcrt4.dll is not found. Could someone give me instructions step by step on how to fix this?
  Thank you so :)

  Hello

  ·        Since when are you facing this problem?

  ·        Remember to make changes to the system?

  ·        Are you able to start on the system?

  (Remote procedure call Runtime) Rpcrt4.dll errors are caused by situations that lead to the removal or corruption of theDLL filerpcrt4.

  Method 1:

  If you are not able to boot to the desktop then, I would say to start in safe mode, and then do a SFC scan.

  Step 1: Boot in safe mode.

  Follow the steps mentioned below to start in safe mode.

  a. restart the system and keep tapping F8 until you reach the start menu.

  b. Select safe mode from the list and press ENTER.

  Step 2: Run a SFC scan.

  Of file system (CFS) when checking that all the Windows XP system files are where they should be as they are by default and not corrupted, changed or damaged.

  a. Click Start, click principally made programs, accessories, right-click on command prompt and select run as administrator.

  b. click on continue or provide administrator credentials if prompted.

  c. in the type in the following command prompt window and press ENTER:

  sfc/scannow

  d. you should see the following message on the screen:

  § Begin the analysis of the system. This process will take time.

  § Beginning verification phase of system scan.

  e. audit % complete.

  f. once the scan is complete, a test to see if the problem you are experiencing is resolved or not.

  For more information, see the article mentioned below.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

  Method 2:

  If the problem started recently, so, I suggest you do a system restore and see if the problem is resolved. Follow the steps mentioned in the article below.

  How to restore Windows XP to a previous state

  http://support.Microsoft.com/kb/306084

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Get error message not found 0 x 80070490 when you try to install windows vista service pack 2

  Nobody knows anything about error not found 0 x 80070490

  https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until February 26, 2010.

  Microsoft free support for Vista SP2 at the link above.

  See you soon.

  Mick Murphy - Microsoft partner

• Error message at startup: C:\Program Files\Play Sushi\PST Text.dll

  Original title: error MESSAGE

  I have permanently the following message when I start my computer ~ ~ ~ error loading C:\Program Files\Play Sushi\PST Text.dll ~ ~ ~ I'd appreciate any help offered. I ran Spyware + Malware + the problem persists. Thank you in advance.

  Something in your system probably trying to run it at startup.  Try to download the freeware "Autoruns" from Microsoft.  Start the program and click on the "Startup" tab at the top.  See if you can recognize an element marked as you described.  If so, then uncheck it.

  Autoruns: <> http://technet.microsoft.com/en-us/sysinternals/bb963902 >

  HTH,
  JW

• RUNDLL error loading C:/Program Files/Common Files/Paretologic/UUS2/UUS.dll

  This message appears when opening programs, i.e. access to the internet or my bank details.

  Hello

  It is a known issue and ParetoLogic has created a special support page that shows you how to remove this error message, step by step:

  http://techsupport.paretologic.com/plsupport/consumer/kbdetail.asp?kbid=571&SearchType=standard&referrer=&gpn=&CustID=&bUseEditor=&keyword=uus&rfield=&usertype=&gpv=&formaction=search&catID1=&IncludeHTML=&TotalResults=0&submitbutton=Go&match=and

  Please follow the instructions in, and the UUS.dll error message should no longer appear.

  Thank you

  Kai

  ParetoLogic

• File not found: C: \Program Files\PCDApp\start.vbs

  Hello

  Sorry, I am garbage when it comes to understanding computers, but I get the above error message, and I was wondering how it was affecting my computer and how do I resolve.

  Any help would be appreciated.

  Thank you

  Sam

  I don't know what could be PCDApp, but some looking online seems to indicate that it is linked to an image or a JPEG image file converter.  Remember to add any program on your computer at the time it started?

  Here's a few thing I would do if it was my computer.

  • Remove any program I have installed around the time that the problem began to occur.
  • Press + R to display the run box, type : startup of the shell then click OK and check the folder that opens to see if there are programs that appear to be related to the message it. Items in this folder to start when you turn on your computer, so this could be the source of the problem.

• importing CDs is not possible; error message: not found medium

  Hello

  with the following facilities, I'm not able to import/convert audio CD into my iTunes mediathek:

  iTunes 12.3.2.25

  MacOS: 10.11.3

  He has worked in the past with no problems...

  Thanks and greetings

  Problem solved already. Somehow, setting the location of mediathek library was missing. Once I corrected the settings, it works as usual.

• I get 'error loading '... C:\ProgramFiles\CommonFiles\ParetoLogic\UUS2\UUS.dll... The specified module is not found .___How can I fix it?

  I get 'error loading '... C:\ProgramFiles\CommonFiles\ParetoLogic\UUS2\UUS.dll... The specified module could not be found.

  How can I fix it?

  http://www.utilitysoftwarereviews.com/how-to-remove-ParetoLogic-uusdll-error-message/ MS - MVP - Elephant Boy computers - don't panic!

• Error -: AIP-50904: see message not found

  Hello
  
  We have 3 windows system act as TP (TP1 and TP2, TP3).
  
  When the message is from TP1, TP2 reached and TP2 sends back an acknowledgement to TP1.
  But when the message is from TP3, the acknowledgement of receipt is sent to TP1 instead of TP3 and appearing in TP1 error is "error -: AIP-50904: see message not found.
  
  The configuration on TP2 TP1 and TP3 are as follows:-
  
  (1) the DUNS of TP1 and TP3 IDS are the same.
  (2) the names of the TP1 and TP3 delivery channel are different.
  (3) transport server names are the same, but their IP addresses are different.
  (4) the agreement names are different, but their agreement IDs are the same.
  
  Can you please address this issue on the priority and consider the question as soon as possible?
  
  Kind regards
  Vishal
  + 919881737231

  Hi Rakesh,

  Since the duns ID TP1 and TP3 are same, B2B to TP2 resumes the incorrect agreement (the one that is indicated for the TP1) and sends it and the ACK to TP1. TP1 having not any message correlated business it is erroneous and TP3 remains waiting ACK. Please use unique IDS of DUNS to solve this problem.

  Thanks and Regrads,
  Prasanna

  Published by: Prasanna Patric on December 11, 2008 23:38

• Modules of sample in OPA 10.4.2 - error 404 - not found

  Hello
  
  I just installed 10.4.2 OPA but was not able to load the rulebases sample included in the package. I just copied everything compiled rulebases (* .zip) of C:\V35235-01\examples\rulebases\compiled to C:\OPA\web-determinations\web-determinations\WEB-INF\classes\rulebases then re-packed folder web-determinations to create web - determinations.war then deployed to Weblogic. When I tested the site web-determinations, I get "Error 404 - not found". Here are the sites I've tried.
  
  Directly from the deployment of the Weblogic Console test tab - http://localhost:7001 / web-determinations
  New IE browser - http://localhost:7001 / web-determinations/startsession/BenefitCodeExample/en
  
  However, I was able to open the BenefitCodeExample page when I accessed the OPM. I opened the project, and then click 'Build and Run' via Web-determinations.
  
  Can you please help me with this problem? I don't know if I'm doing good how to deploy the rulebases. If this isn't the case, please let me know the right way. Thank you!
  
  Kind regards
  
  Ann

  Are you sure that you create the war file correctly? you will need to zip the contents of the directory of web-determinations and not the directory itself, try to open your file. War and the file war comes with WinZip and compare the content.

• Windows XP Media Center 2002 - RUNDLL error message; "Error loading c:\WINDOWS/svacaciz.dll".

  I have Windows XP Media Center 2002 and implementing on the road, I get a RUNDLL error message; 'Error loading c:\WINDOWS/svacaciz.dll - the specified module was not e' Please HELP

  It is easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem simply remove the startup message.
  I would recommend also you start to search in the register, unless you have a backup because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.
  These ideas relieve 'rapid' and sometimes risky of the symptom, but may not actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.
  Here are the detailed instructions that protect you and solve your problem in the 'right' way.
  There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.
  Describe your current antivirus and software anti malware situation: McAfee, Norton, Spybot, AVG, Avira
  !, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..
  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.
  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry. There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can use Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can simply disable, restart and if the problem is resolved and then remove the offending entry
  .  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that you had or have an infection, followed with this:
  Perform scans for malware, and then fix any problems:
  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.

  Do not guess what the problem might be - understand and resolve it. I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• Satellite A40 - 10 - D drive: for code error is not found

  HELP PLEASE!

  I really need help to fix errors on my system.
  A few moments ago I accidentally deleted the DVD player + / optics to my laptop, and when I go to my computer, it's not here?
  The sys. tells me that the D: drive is not found, and the disc has been removed without preparation and cannot be found, error code 10.

  What this means, as I tried to update the BIOS and it didn't need, and I can't find a driver for the A40 Satellite from Toshiba.
  In addition, drivers seem to be ok and the boxes are checked in the device management, even if the optical drive has sometimes a yellow exclamation?
  Tried the recovery disc and no luck.
  Also the drive does not work now, because it does not read discs!

  Here is the Spec for the computer, as well as the summary for error messages. Reallr wouild appreciate any help on this please...

  My computer science - general

  Please wait while the information gathered...

  100% (collecting Local disk information)

  Refreshing the screen
  Specifications
  TOSHIBA
  System model: Satellite A40
  BIOS version: TOSHIBA Version 1.50

  Operating system
  Microsoft Windows XP Home Edition
  Version: 5.1.2600
  Service Pack: 1.0
  Location: C:\WINDOWS
  PID: 55277-OEM-0011903-00111
  Hot Fix: Q817606

  (Vivid RAM) memory
  Capacity: 2 GB

  Here is a list of the Dr. watson error reports that appeared the donation system.

  January 25, 2009 Service Control Manager the Application Management service terminated with the following error: the specified module could not be found.

  January 25, 2009 atapi the device, \Device\Ide\IdePort1, did not in the expiration time.

  January 25, 2009 Cdrom driver detected a controller error on.
  January 25, 2009 atapi the device, \Device\Ide\IdePort1, did not in the expiration time.
  January 25, 2009 Service Control Manager boot start or system start (s) what follows could not load: Cdrom
  January 25, 2009 PlugPlayMa swim the device ' S I t A D D - M R - 6! 1 '' ' (IDE\CdRomT_S_I_A_D_D-R_M_S_-_ 6! 1 '___1 #3' 423362730283321372620202020202 020202020 ___\3) disappeared from the system without first be prepared for removal.

  January 31, 2009 Cdrom driver detected a controller error on.

  January 31, 2009 Service Control Manager boot start or system start (s) what follows could not load: Cdrom

  January 24, 2009 Applicatio n error Faulting application helpctr.exe, version 5.1.2600.1106 failing module kernel32.dll, version 5.1.2600.1106, fault address 0x0001a67a.

  January 25, 2009 MsiInstall product Re: ParetoLogic DriverCure - 1722.There error is a problem with this Windows Installer package. A program run as part of the Setup did not finish as expected. Contact your provider to support personal or package. Action DeleteScheduledTask, location: C:\Program Files\ParetoLogic\DriverCure\D riverCure.exe, command:-deletetask

  January 25, 2009 Applicatio n Hang Hanging application switch.exe, version 0.0.0.0, hang module hungapp, version 0.0.0.0, hang address 0x00000000.

  Hello

  Akuma is right. I tried to find Microsoft document about this, but somehow the old links no longer work.
  In any case, after removing the Upperfilters and Lowerfilters optical drive should be recognized correctly again and you can use it again.