File not found: C: \Program Files\PCDApp\start.vbs

Similar Questions

• McAfee file is not found when I try to start the services stopped in the Computer Management Console.

  McAfee services ceased.  When I go to Services and try to start I get an error 2, "the file is not found."  I look in the programs and the file seems to be there.  I believe that the services were stopped due to Game Booster (which has stopped some services when you are playing a game).  I had turned on Game Booster, then I shut down the system without return - turn off Game Booster I believe that some of my services won.

  Uninstall mcafee in any case, his despair. Or uninstall it then reinstall it

• Not found payment module: Get cannot start my application on the Simulator

  Hi guys,.

  My project successfully compiled the JDE 4.5.0. But I am after the error message when running the app on the Simulator:

  Starting MyApplication
  Searching installed codfiles for alias 'paymentapi'
  Searching uninstalled codfiles for alias 'paymentapi'
  Module 'paymentapi' not found.Error starting MyApplication: Module 'paymentapi' not found.
  

  I added some paymentapi.jar for my project. Project-> properties-> Build tab-> any Jar files.

  What's wrong?

  Please guys advice.

  Thank you.

  I found the solution. We need to compile the JAR file in a new project.

  Here's how:

  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800901/How_To_-_Compi...

• DIAdem file system "DEM_OV0. RND' not found! Program abandoned

  I am running 2012 DIadem.

  On a side note, I tried install DIAdem 2014, a couple of days and had to stop due to some errors of installation.  I ran my tiara 2012 since the aborted install but I was missing all my index searcg and the selection to install is grayed out.

  Any ideas?

  I was able to reload 2014 and no longer have this problem.

• module of rundll error message not found c:\program files\common files\paretologic\uuss2\uus.dll

  rundll error message see above question

  Perhaps the 9th or 10th time it came. Something certainly happened.

  http://www.whatthetech.com/2009/07/22/how-to-remove-ParetoLogic-UUS-dll-error-message/
  MS - MVP - Elephant Boy computers - don't panic!

• Computer supported by rogue program who wants to buy it, can not access to programs on the Start Menu. Error: Windows Defender encountered error 0 x 80070424. Very slow performance

  Original title: I have a BIG problem!

  When I start my computer I is no longer able to enter my tab start. It is empty. When I shoot computer (search) it says that I have nothing. All files have been deleted!  A program called OnPay, Inc. (USA) check my computer using the recovery of files.  OnPay, Inc. says that it is a system utility.  It is capable of S.M.A.R.T. (so it says).  I used to have Microsoft Security Essentials, but my computer can't find it.  When I go on the Internet or in another file, a Service Manager window pops up saying that t8EXTPEx.dll is missing or still missing.  This program of OnPay, Inc. just wants me to buy their service - but won't give me their price.    Windows Security Center can't be started is another message that I get.  I also get the window that Windows Defender encountered error 0 x 80070424.  The specified server does not exist as an installed service.  Help!  My computer is very slow.  I have Internet through pdli.net (Pioneer).  My email address is: * address removed privacy e-mail. *

  I hope that I'm not a lost cause!  Thank you very much for your help!

  Jan Bornemann

  Address removed from electronic privacy. *

  Phone number removed for privacy protection *.

  Hello

  Method 1:

  I suggest to go through the steps from the link provided and check if it helps.

  Levonorgestrol error 0 x 80070424 when you use Windows Update, Microsoft Update, or Windows Firewall

  http://support.Microsoft.com/kb/968002

  I also suggest you to start the computer in safe mode with network and run a full scan using the Microsoft Safety Scanner and check.

  Method 2:

  Step 1:

  Start your computer in safe mode with networking;

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2:

  Scan the computer by visiting the link below:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: there is a risk of data loss if all the files are infected and which can be removed in the cleaning process.

  Hope this helps and keep us posted.

   

• User account does not show "all programs" in the Start Menu in XP

  When I press the Start button on my user account on my computer, the button that shows "all programs" is not there so I can't access any of the programs on my computer. What should I do to let me have access to all the programs here?

  http://xperiencexp.blogspot.com/2005/10/all-programs-menu-missing.html

  Try this link to see if it helps.

• Code Error 80070002 and previous pop ups saying that he has not found windows program

  What is the problem with my computer! I am installing the vista update to upgrade to windows 7 and all I get is error code 80070002 I deleted the update history, as the evil grows said but I still get the same code. Thank you!

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-Error-80070002

  Windows Update Error 80070002

  There is more than a little advice on the link above to fix the 80070002

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Windows Update Forum:

  It's updated operating system Vista, upgraded installation and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• "80070002" error the system cannot find the file specified with start.vbs

  Original title: Windows Script Host

  Script: C:\Program Files\PCDApp\start.vbs

  Line: 2

  Char: 1

  Error: The system cannot find the specified file.

  Code: 80070002

  Source: (null)

  1 first, update your AV program and run a full scan. Then download, install, update and run a full scan with malwarebytes(free). This will help you establish that his little likely to be malware related, or not.

  If each scan find and remove whatever it is, does the problem persists after that scans have completed?

  2 if so, try a clean boot. If the problem does not occur in 'clean boot' then follow the section "How to determine what is causing the problem by performing a clean boot" in an attempt to establish that generated the message.

  Do not leave your PC like the clean boot and return to a normal startup after your investigations.

  3. If the boot doesn't help, take a look at autoruns to see if that can locate which is turned on and generates the message.

• EXEC file not found OCX, virtual, or low memory, connection has expired in Web sites

  Original title: frustrated Surfer

  Get "OCX file not found Exec" and every day I have ASUS virtual memory low or out. Scroll often does not and most of the time 'egg timer' turning, so slow sometimes websites Time out until I'm done. PLEASE HELP, or it's time for the big trash can in the sky? Lap top is more than 10 years old now.

  Hey,.

  It would help if you could answer these questions in order to solve the problem.

  -What version of Windows you are using on the laptop?

  -When exactly you get the error "Exec of OCX file not found '? It is when you start the computer or by accessing any program?

  -How did the laptop connected to the router? Is it wireless or wired?

  -What anti-virus software is installed on the computer? You have scanned the computer?

  -Remember to make changes on the computer? Updates/programs installed?

  Try these steps and let us know if they help.

  a. for the error message "exec OCX file not found", put the computer in start state in minimum mode and know what software is causing this error message.

  http://support.Microsoft.com/kb/331796

  Note: Once done troubleshooting, put the computer to normal mode according to the steps in "how to regain a normal Windows startup mode.

  b. increase the size of the virtual memory according to the steps in http://windows.microsoft.com/en-in/windows7/change-the-size-of-virtual-memory . Restart the computer so that the changes are applied.

  Note: the steps apply to Windows 7 and Windows Vista.

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/sysdm_advancd_perform_change_vmpagefile.mspx?mfr=true (Windows XP)

  C. follow the steps in http://support.microsoft.com/kb/936211 and check if you have full connectivity when you access Web sites. Also, download and install the latest drivers from the laptop manufacturer's Web site network.

• Run Autoruns and found rdpclip listed at startup but FILE NOT FOUND

  Original title:

  PC was unstable.  Run Autoruns and found rdpclip listed at startup but FILE NOT FOUND

  Jill

  Click Start

  In the start search box, type msconfig

  Click on continue if prompted for permission

  Go to the Startup tab

  Research of any startup item that refers to rdpclip

  If found, clear the check box to the left of this startup item, and click on apply

  Return to the general tab

  Select Normal startup

  Click on apply and OK

  Restart your PC

• Tecra M9 - TPSMain.exe cannot start because CpePerf.dll was not found

  Hi and help,

  searched the Web and found other discussions of the forum with similar questions.
  Tried all suggestions, nothing worked. I'm not very good on the computer but you can find my way. In any case...

  After connection messge pop messages - up in succession, similar to: TPSMain.exe cannot start because CpePerf.dll was not found then: TPSoddctl.exe cannot start because CpuPerf.dll not found

  Computer works very well but Power Saver start is not automatic and can't select it from the Panel... "" Toshiba power saver does not work. "
  so select the power options... "could not start because the CpuPerf.dll is not running.
  Did all the research on the net and followed all the tips... i.e. unistall saving in safe mode, uninstall toshiba common utility can uninstall fatal error 0x7e

  Then download Ccleaner, inspections, uninstall with Ccleaner same fatal error.
  In support of Toshiba and tried to install Power Saver... same problem will not install.

  Thus help help help if possible.
  Computer works well but popping up messages are annoying and I'd love to sleep to extend battery.

  Tried the system restore, even though I doubt that it affects the files... Another problem "cannot complete system restore"... tried this several times and cannot restore the system either... What is happening?

  any help please
  Tim

  Hello

  I think you can solve this problem, recover the laptop.
  But that would mean that the whole HARD disk should be formatted and would be installed everything again, I put t know if this is an option for you

  It turns out that something will not with the Toshiba Power Saver installed and, consequently, the popup message.
  Usually new installation of GST should help. But it was not and I m wondering why

  Maybe this is s question really an OS since system restore help (to the previous state) didn t

  He s strange question right now I can suggest only a new recovery

• Windows 7 64 bit not found SysMenu.dll

  I get the error message below when working under Windows 7 64-bit.

  "There was a problem starting.

  C:'PROGRA~1/common~1/system/SysMenu.dll ".

  The specified module could not be found. »

  All updates of widows were carried out from July 1, 2014.  Have also run several (in-depth) anti-virus and anti-malware scans (etc.), without resolution.  Please help if possible and thank you for your help.

  Josh

  My computer has recently displayed an error saying not found C:\Program Files\Common Files\System\SysMenu.dll. The cause is that the AVG antivirus program had removed as a perceived virus. Thinking about this perception was wrong, I wrote the file in AVG exceptions box. Then I reset the computer with RSTRUI in the command prompt, a zero before release date when the error message appeared. He fixed it. My personal bat - and exe-files have been reset also, so I had to make the changes of the past few days again. Personal records are supposed to be unchanged by reset, but which does not apply to the program files.

  SR

• Linksys - router bridge - E8350 path not found network

  Dear community of Linksys,

  I recently bought a Linksys E8350 router, to replace the old AP in my network domestic.

  To make the installer of my clear network, I did a little diagram:

  

  So, as you can see, at the top left is the router/modem provided by my internet provider (Telenet, Belgium).

  I have a wired connection in my room, where I have my desktop and NAS connected computer. I also plugged the

  Linksys E8350 that is configured in Bridge mode. My laptop is connected wireless to the E8350.

  On the E8350, I disabled DHCP and NAT and gave him a static IP outside the range of my other router.

  My problem:

  When I go to the network through windows file Explorer, I can see my desktop from my laptop and vice versa.

  But when I double click to access one of them, I get the error message "network path not found".

  Connection via start > \\Computer-name gives the same error.

  Since my laptop or my desktop, I can see my NAS on the network. I have internet on all my devices:

  My office through internet cable connection, my laptop has wireless internet connection trough

  and I can evaluate my NAS from the internet.

  When I remove the E8350 entirely from my network and connect my laptop a hollow wired connection.

  everything works fine. I can see all the devices on the network, connect to my NAS and share files between computers.

  Things I tried already:

  -My PC and laptop are both in a 'private network '.

  -J' disabled my firewall

  -Everything is activated in the menu "sharing advanced settings."

  -J' tried to connect the E8350 to the switch via the Ethernet or WLAN port, nor to solve the problem

  -J' tried to change the NETBIOS settings

  -I don't have your antivirus software that might interfere with something

  -J' updated the firmware on my linksys router to the latest version

  To be clear, the problem occurs when I put the E8350 in my network, otherwise everything works perfectly.

  I hope that I have provided some information decent on my problem, because I can't seem to figure it out myself.

  Thank you in advance.

  Pindox

  The topology of your network is effective from your diagram. With the E8350 in mode bridge in this topology is WAN is connected to the network switch.

  Many devices of bridge no hand NetBios address very well. In some cases, the best way to access the network through a bridge device resources is to use remote devices IP address instead of its computer\device network name.

  In Windows, you can drive old school card NAS records using the IP address of the Servers\NAS:

  PC command line:

  NET use s: \\192.168.0.3\my_nas_folder / persistent: Yes

• Entry point not found

  I keep getting messages om starts WCESCOMM. EXE, point of entry not found. It keeps me start the system, but it's a nuisance.

  Hello

  It would seem that you have malicious software installed on your computer. Your Antivirus seems to have removed but left one startup entry so that it is always installed.

  Read this explanation of what it is:

  http://www.prevx.com/filenames/1261972106266340798-X1/Wcescomm++.exe.html

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  If the problem persists after scanning, take these startup entries:

  "How to use MSCONFIG in Windows Vista" (example that you do not give us your operating system)

  http://www.netsquirrel.com/Msconfig/msconfig_vista.html

  You can also use this free program to do, too:

  "Autoruns for Windows V11.32"

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  See you soon.