Momentics IDE not pair deveice using wifi

Similar Questions

• Ethernet controller driver not found / cannot use wifi

  Hello.
  
  Some time ago, I accidentally deleted an important driver, which I thought was something else until it has been removed, and I could use my wifi. I have deleted an Atheros network driver. I tried for months now to reinstall, but unfortunately I had difficulties. I used all the resources I have and came up empty every time. I tried to use the windows update, the computer sent me on hp website to download the driver specific, everything. Whenever he tries to install or update the driver, it fails. Today, he finally showed me 'Ethernet Controller... ". No driver found' x
  
  Is there anyone who can help me? or at least give me some advice on what I should do?
  
  My computer is a compaq presario CQ60. Windows 7 Ultimate 32 bit. Service Pack1. Processor: AMD Sempron (TM) TR-42 2.10 GHz. Ram 3.0.
  
  I don't know what are the other necessary information, please let me know.
  
  Thank you.

  You are the very welcome:

  Here is the link for the driver, you need to reinstall.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & cc = us & prodTypeId = 321957 & prodSeriesId = 5060880 & swItem = ob-108905-1 & prodNameId = 5060882 & swEnvOID = 4052 & swLang = 13 & taskId = 135 & mode = 3

• Unable to connect to the computer using wifi

  A got a new Sony HX30V and tried to use the feature "send to the computer. He is able to connect to the wi - fi home and also able to detect the name of the computer to which it is supposed to transfer the photos to. However, during the process to actually connect to the computer, it throws a "network error" after trying for about 30 seconds. I have Windows 8 running on my system. Any ideas how to solve this?

  After spending hours and hours with exactly the same problem, I found the solution. I tried with 2 computers with different OS, 2 different networks, and I read a lot of posts...

  The problem behind it is that you could not transfer images using WIFI while your computer is also connected via WIFI.  Then:

  (1) connect your computer using the connection of the cable to the access point.

  (2) connect the camera via USB to your computer and make sure that the PlayMemories software detects the camera.

  (3) then, unplug the unit and send images to the computer using WIFI.

  If this does not work because the shipment never ends, and then review:

  (1) the battery should not be weak, or if she is then connect the camera to the power supply.

  (2) the distance from the camera to the access point must be short (maximum of 3 meters), otherwise it is too slow.

• Beta 4 - Momentics IDE seized semiautomatic does not work for Qt classes in the newly created projects?

  After you have uninstalled the Beta 3 Momentics IDE und install the new beta 4, I noticed that the autocompletion of the IDE not working anymore for Qt classes when I create a new project from a template (empty or non-empty). It seems that the IDE cannot find the Qt header files:

  

  But I can compile the project without problems.

  When I import my old projects created with the Beta 3 of the autocompletion also works for Qt classes. When I compared to them, I noticed that the Makefiles have changed completely.

  Of course I could stay with my old project structure, but the Release Notes for the Beta 4 mention something about the changes in the Qt libraries, pre-compiled headers and so on who might require changes in Beta 3 projects. To avoid problems, I thought I could just create new projects in Beta 4 and re-import my source files for my Beta 3 projects. But I want to keep the autocompletition for Qt classes.

  I guess it's just a problem in files created automatically from the project. Is there a way to remedy?

  Thanks for your replies. The trick to rebuild the index was useful, but does not solve the problem in itself.

  But comparing all files in some of my old projects of Cascades generated in Beta 3 and newly generated in Beta 4, I found that in the Beta 4 project files .cproject, missing several tags that setting the include path for Qt for the IDE headers. Note, I'm not referring to the railways include the settings of the compiler here. Just autocompletion and also the analysis of the code in the IDE has not worked.

  In any case, to solve this problem, I found the following solution:

  There are four instances of these tags in the file .cproject of a Cascades (beta 4) project:

  Where NNNNN is a number randomly. When I change all these 4 cases to:

  .. .then they review as they did in the Beta 3 and then refresh the project or restart the IDE autocompletion all started working again for new projects of Beta 4. When I then invoke Index-> reconstruction such as recommended in the other thread also the analysis of the C++ code for the work of syntax errors and semantics again (if you have enabled in the IDE).

  I suppose that these lines could also be included in the model files somewhere in the NDK of BB installation folder, but I didn't fix files it.

  I have submitted a new question here:
  https://www.BlackBerry.com/jira/browse/BBTEN-466

• Momentics IDE does not

  Everyone has a problem with Momentics IDE. This is the 2nd time I use it since the update to 2.1. The first time, no problem, but today, it opens and then crashes with the message "Momentics IDE does not. It does not even load the homepage before it crashes. Any ideas?

  OK... so I left open EDI and after a long time, it loads and I can proceed as usual. I reported the bug. Hope, it is soon set. If someone did know everything, I'd like to hear it.

• Cannot open binary file in Momentics IDE using C++

  Hello

  This has more to do with C++ with qml but I'm stuck for awhile now and maybe someone here knows the answer.

  What I want to do in my app is I open and read a file once I clicked on a button. This is my code to open the file:

  // after button is clickedfstream file;
  file.open("S:/filepath/file.abc", std::ios::in|std::ios::binary);
  
  if(!file.fail()) qDebug() << "File not found!";
  else if(!file.good()) qDebug() << "Can't open file";
  else if(!file.is_open()) qDebug() << "Error opening file!";
  else{
      qDebug() << "Start opening file ...";
      if(file.is_open()) {
          qDebug() << "File is open!";
      }
  }
  

  First of all I don't get the "file not found" - message so the! file.fail () command works very well and that the file exists.

  But when I then check if the file is opened with! file.good () it gives me my error message that the file is not opened.

  My version of test in Visual studio, has worked well. But not in the momentics IDE it does not work. Can someone give me a clue what to do?

  I'll hazard a guess may be for the user to select a file and then read it in this case, you will need to use a FilePicker...

  http://developer.BlackBerry.com/native/documentation/Cascades/UI/pickers/filepicker.html

  Using what happens then a path valid + file name with which you can use to switch to QFile...

  http://developer.BlackBerry.com/native/reference/Cascades/QFile.html

  As a hint of Windows has its own way of doing things, UNIX (and in this case QNX with Qt/Cascades on top) another.

• I'm locked out of my iphone5 not connected to my wifi at home and my home button does not work, any ideas on how to fix?

  I'm locked out of my iphone5 not connected to my wifi at home and my home button does not work, any ideas on how to fix?

  < re-titled by host >

  Take it to an Apple Store for repair or replacement.

• WiFi 802.11 b, g, n (2.4 GHz and 5.0 GHz), why is the razr not able to use 5 GHz?

  I was wondering why we are not able to use 5.0 GHz, does make a difference? Totally, I do not know. Maybe you guys can help me. Thank you!

  (please not all values are estimated and not 100% accurate)

  The only advantage on the 5 GHz will be noticed if you're less 1 mtr from the router once you pass the 1mtr threshold you will lose any advantage in speed so your phone will automatically be seleect the 2 GHz band.

  5 GHz bandwidth may push your wifi connection up to 300Mbit while 2 GHz is limited to about 190Mbit

  but on 802.11n distance plasys much of the speed you will actually recive therfore in the case of mobile phones there is no great advantage in the phone, a connection of 5 ghz as if you where to walk away from your router 3mtr aprox you up to 180Mbit in speed is (in my opinion) main reason why phones do not hold a connection of 5 ghz for a long time.

  the 2 ghz range will be a higher speed over a longer distance (this is on 802.11n)

  However if you have an 802. 11 a router then the benefits of the 5gzh is capped at 190mbit however, you can hold a stronger signal over a longer distance compared to 802.11n the problem here is that the routers are configured more to computers and personal computers portable therfore so they droped the 802. 11 a band and open until the speed 802.11n short-range can on long distance, is no great loss because your device will automatically change to load of bands on your remote (this can be demonstrated by your router at 5 GHz to lock if it supports doing so)

  and you will also notice that your razr connect to band 5 GHz in the present case.

  In required short is correct in the statement there is no advantage to 5 GHz running more than 2 GHz.

  I hope this explains a little about your problems.

  Kind regards

  Kristian

• How can I say Migration Wizard does not use WiFi?

  I'm trying to migrate from

  an old Macbook Pro running Yosemite

  for a new Macbook El Capitan running.

  I normally connect these machines to the internet through WiFi and DHCP.

  When I tried to migrate using WiFi it is too slow.

  I tried to disable WiFi on both machines and directly

  connect using an Ethernet cable

  as the Migration Assistant suggested doc.

  I needed a lightning for Ethernet card to connect to this

  cable for the new Macbook Pro.

  So I ran the Migration Wizard on both machines.

  The Migration Wizard insisted to turn on the WiFi again.

  How can I say Migration Wizard to use the cable and not WiFi?

  I guess I have to configure something on the network first,

  but the Migration Wizard documentation does not explain how

  to do manually and does not correct it automatically.

  Connect by Ethernet or drive directly to the computer and turn off Wi - Fi.

• If register with RIM signing do not work correctly in QNX Momentics IDE®

  Hello

  I reveiced files of the SJC. ® For QNX Momentics IDE, I open the preferences-> BlackBerry Tablet OS-> signature - > save.

  I complete the form with the SJC, pine files and passwords. When I submit the form, everything is ok and I receive an email to confirm that I am registered.

  But the problem is when I restart QNX Momentics IDE®, BlackBerry Tablet OS->-> RIM signing authority signature it says "saved: No.

  If I try to record again, QNX Momentics IDE® say that I'me is already registered, and I need to contact RIM to add another user (I don't want to add another user).

  Someone had the same problem? How to fix this?

  Best regards

  System Specs:

  Windows 7 32 bit under parallels on Mac OS x 10.6.8 6.0.12090

  ® For QNX Momentics IDE for BlackBerry® native SDK for Tablet OS Version: 1.0.0 Build id: 201110112127

  There is a bug in NDK 1.0 with localized Windows versions and the signature. This bug has been fixed in NDK 2.0, which should be published very soon. You can also use the beta version 3 If you can't wait for the release of the NDK 2.0 GA.

  Unfortunately, you will need to ask new SJC files and resave.

• Suggestions for auto BB10 - Momentics IDE does not not for PPC files

  After updating my momentics IDE verstion to 2.1, suggestions (ctrl + space) auto works is not for the cpp files. Please help me with this.

  Check on Preferences-> C / C++-> Editor-> Help content-> advanced, that you have enabled.

• Satellite A100 - can not use Wifi after installing Win 7

  Hello

  I have a laptop Toshiba A100 of broadcasting.
  After 4 years of use, he was once hit by attack of virus and after detection, I got my laptop to format.
  and now, Windows 7 Home Premium has been installed (originally my OS is Windows Vista).
  Now I'm not able to use Wi - Fi.

  Please suggest me the procedure I need to follow in order to access wireless networks.

  My machine configurations are:
  1 GB of RAM
  HDD of 80 GB + 500 GB external support
  WINDOWS 7 Edition Home Premium
  1.6 GHz FREQ.

  Hello

  Have you installed the driver Wlan?
  The wireless network adapter is visible in device-> network cards Manager?
  Check it!

  In addition it s interesting to know if you are able to activate the WLan using FN + F8?
  If you will not be able to do so, you must install VAP (value added package) and Flash memory card Support utility.
  Check these two tools that have been published in Satellite L500 driver download area

• After 4.4.2 update can not use WiFi &amp; Bluetooth togeth

  After that I updated to KitKat 4.4.2 cannot use WiFi and Bluetooth at the same time. Must turn off Bluetooth to use WiFi.can you help with this problem. I have the Motorola droid RAZR maxx hd

  Double wire closure. Thanks for posting here.

  Mark

  Forums Manager

• can not use wifi

  HelloW my name is michel , last night, I decided to reinstall my windows 7 like the version I was using started to crash and freez. After downloading and installing windows 7 ultimate 64 bit operating system I couldn't use wifi more. my pc just to scan for wifi it only accepts internet cable however. Please help me I really need wifi

  Hello:

  This should be the driver for the wireless card you need...

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-76462-1&cc=us&DLC=en&LC=en&OS=4063&product=4035647&sw_lang=

• If I use WIFI in my laptop is not online

  Maybe someone here can help me.

  We just moved places and got a new phone line. Since this day I'm not able to use internet via WLAN naymore. I configured everything but some how the laptop is always offline. I did the same with my company laptops and all is well. Also if I use the cable, I can go online. What can be the problem? Is that what I may be changed when the connection setting?

  Would be great if someone nkows response.

  Thank you!!

  Hello

  If you explain what type of Interent connection, you and the material in question using (Modem/router/access point) and how it is configured, it will help you be able to help.

  These pages can provide you with the general concepts of what to look for.

  My wireless is not working - http://www.ezlan.net/wireless.html
  Basic wireless configuration - http://www.ezlan.net/Wireless_Config.html
  Wireless Security - http://www.ezlan.net/Wireless_Security.html

  Jack, MVP-Networking. EZLAN.NET