Unable to connect to the computer using wifi

Similar Questions

• My iPhone can connect to the computer via Wifi instead of cable? Because I figured that my head of the telephone cable i have problem if the computer cannot detect my folder after plugging in the cable.

  My iPhone can connect to the computer via Wifi instead of cable? Because I figured that my head of the telephone cable i have problem if the computer cannot detect my folder after plugging in the cable.

  Sync your iPhone, iPad or iPod touch with iTunes using a WiFi - Apple...

• Unable to connect to the internet using Firefox or IE

  Unable to connect to the internet using Firefox or IE. I can ping other pc on my network home and can ping websites such as google.com. Other PCs on the home network connect without problems. Nothing has changed in the network or the configuration of IE/Firefox. The only change is that I have installed the update to Vista SP1

  Hello

  Stack TCP/IP Winsock settings in Vista has probably been corrupted.

  Journal to this page and scroll down, there are instructions for Vista.

  http://support.Microsoft.com/kb/811259

  Jack, MVP-Networking. EZLAN.NET

• RCU error: unable to connect to the database using the contact information provided

  Hello

  I am not able to connect to the database using the remote control 11.1.1.10.1 to create patterns. I ran the UCR even a week ago and I managed to connect. My database and listener are up and running and the host and the credentials are correct. I don't know where is the problem. Any help will be appreciated. Attaching the screenshot for reference.

  

  Concerning

  Oumaima

  Hi Handal

  Thanks for the reply. Looks like someone had blocked the firewall settings, so I was unable to connect to the database using the port.

  Thank you

  Oumaima

• Satellite L300D: Unable to connect to a network using WIFI

  I can't connect to a network using WIFI on my new laptop (which seems to be fairly widespread)
  When I followed the advice of the Knowledge Base, he said I should see an unknown device icon when I click on the other peripheral icon instead there is an icon of Ethernet controller with a yellow label on it

  Any help would be accepted with gratitude,

  Kind regards
  David

  Hello!

  What section of the Knowledge Base do you mean?

  However, try to update the driver. You can find it on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Sometimes, I read in the forum that a BIOS solve the problem too.

  Additionally, make sure that the wireless is turned on with the power button on the computer laptop and FN + F8.

  Good bye

• "Unable to connect to the computer printer" message appears during installation of laserjet p1102w.

  During the installation of the wireless software for Laserjet P1102W on computer with XP Professional (pk2), the message ' printer was able to connect to the wireless network.  However, this computer is unable to connect to the printer. "I checked the printer and the computer both connected to the same network named with even WEP key, opening, credentials etc.  I have a linksys connected to the computer and the modem cable. When I connect using the USB connect wire to the computer directly, I can print.   Two software, wired and wireless, have been loaded.  My HP inkjet printer is wired to the linksys and works for multiple computers to the wireless network. Do I need to have another printer? I thought that I could still have a truly printer wireless!  I'm a novice at this.  Thanks for any help you can give.

  I called HP support.  The technology was very knowledgeable and accommodating.  HP Smart Install program (in the printer and on CD) that came in the box was an old version.  I had to reset the printer back to factory default and to download the new firmware on the HP.com website.

  The oldest had an incorrect address router (network). You can see the address of the router (IP) when you perform the self-test (hold down the button "on") under the information network.  IPv4 address must be the same as your router.  Now my printer and computer are looking at the same network.

  Works great!  Love this LaserJet.  Faster than my last HP LaserJet 4 L.

• Unable to connect to the Internet using Auntie Photon, it shows the device has been disconnected or is not available when clicking on the button connect

  Original title: Auntie Photon

  Hi all

  I use Auntie Photon on windows platform 8, and it shows the device has been disconnected or is not available when clicking on the button connect. For this reason, I am not able to use internet on my Laptop.I also in contact with the customer service and they told me to take the laptop to any engineer to solve this problem.

  Help, please.

  Hi Varun,

  Thanks for posting on Microsoft Community. I understand that you are not able to connect to the Internet using the dongle Auntie Photon. Let us work together as a team and try to get this fixed number.

  Please help me with the following information related to this issue:

  1. You have installed the required software on your computer which came with Auntie Photon?
  2. Do you see an error or exclamation point in Device Manager when you connect Auntie Photon dongle? See the steps to check:
  • Press Windows Key + X.
  • Select Device Manager.
  • Check if there is no error or exclamation point under Auntie Photon.

  This problem can occur if device drivers are not get detected or due to missing/corrupt device drivers.

  Please follow the steps mentioned below:

  Method 1: Run the hardware troubleshooter

  The convenience store is an automated tool that checks the hardware attached to the computer for known problems and provides details on how to correct them. Follow these steps to run the troubleshooter.

  1. Press Windows key + W on the keyboard.
  2. Type the Troubleshooting in the search bar and press Enter.
  3. In the Troubleshooting window, click show all in the left pane.
  4. Click hardware and devices.
  5. Click right on material and devices and and select run as administrator.
  6. Click Next and follow the on-screen instructions to complete the process troubleshooting.

  If the troubleshooter could not find and fix the problem, I would suggest trying the following method and check.

  Method 2:

  Note: Make sure that the Auntie Photon dongle is plugged.

  Step 1: You can try to uninstall and reinstall the drivers of Auntie Photon and check. Follow these steps:

  1. Press Windows key + X on the screen.
  2. Select Device Manager.
  3. Expand the network adapter and right click on driver and select Uninstall.
  4. Restart the computer.
  5. Windows will automatically load the drivers.

  Step 2:

  You can also try to launch the Windows updates and install all the updates that are available including the driver in option and the updates of the firmware.

  Windows Update: frequently asked Questions

  You can also get in touch with Auntie Support and check the updates to driver for Windows 8.

  Please answer us on the State of the question to help you further.

• Palm TX connects to the computer via WiFi for Hotsync

  I tried the network Hotsync on all my computers, XP, Vista 32 and Vista 64 (which started the whole attempt) and the device fails to connect to the computer, even if I set the IP address.

  My wireless network see the Palm and I am able to access the Internet through it, but it does not connect to my computer. Any suggestions?

  Here is my Wifi Hotsync help file:

  WiFi HotSync with a TX

  1. on your PC, locate the Manager HotSync (small HotSync icon in the lower tray of the right tool on a Winbox). Click top and check 'Network', then click again and select Setup.

  2. choose the network at the top tab in the window that opens and locate your HotSync name in the list. Make sure it is checked.

  3. press the button of TCP/IP and look for the IP listed for "main PC address. Write it down.

  4. turn on the Wifi on your Palm and you connect to your router.

  5. on your Palm, select the HotSync program and press the word "Network" over the HotSync icon in the middle of the screen. Below, enter the IP address that you noted in step 3. (Include periods!).

  6. tap the HotSync icon big above the IP address and hang in there!

  7. If you stand and nothing happens try a HotSync cable, then retry the HotSync Wifi. Sometimes, information is to be transferred from your PC once you check the network option. Also, don't forget to watch for any activity of firewall ask you questions about "HotSync.exe tries to access your hard drive" etc. You may need to define a rule to allow him to.

  On your TX, check these settings in the drop in Hotsync:

  Modem Sync: network

  LanSync: LANSync

  Network configuration: (Wifi should be listed as one of the networks)

  WyreNut

  Message edited by WyreNut on 02/11/2008 10:59

• Unable to connect to the internet using a Wi - Fi connection

  original title: wireless connection problem

  My son can connect to the internet with his phone and the ps3, but no more with his laptop

  He was able to connect before on laptop. No matter what he tries, he can't re - connect his laptop to the internet... It has windows 7
  Thank you

  Hi mikecampbell,

  If you are still unable to connect to the internet with a wireless and wired connection, make sure first that the wireless card is turned on. On most laptops, there is a button in the front of the laptop. If you are still unable to connect to the internet, follow the steps described in this document.

• Unable to connect to the computer because the password is not be accepted.

  Hello

  So yesterday, I decided to put a password on my pc (Windows 7 Home Premium 64-bit), but when I turned on my pc today, he immediately said that I have to enter a user name and a password first.

  But I did have the chance to fill in anything but it was weird.

  Anyway, I pressed OK and it sent me to the login screen.

  All of a sudden there is 2 users, instead of one, but none of them was my account.

  They both had no name or avatar so they were square just empty, and they're all two protected by Word.

  My password does not work on both accounts, so I can not connect. I tried to get with Safe Mode, but even then he asked me a password!

  I have a few projects out there that need to be finished and send it within 2 weeks so I really need these files.

  I don't mind if I have to format my whole hard drive, but is it possible to go beyond the login screen?

  Or just a way at least to get some files?

  All advice is appreciated!

  -Martin

  Hello

  If you put a password on it, it is normal that next time you start it will ask for this password.

  "What to do if you forget your Windows password"

  http://Windows.Microsoft.com/en-us/Windows7/what-to-do-if-you-forget-your-Windows-password

  "If you forget the administrator password, and you do not have a password reset disk or another administrator account, you will not be able to reset the password. If there is no other user account on the computer, you will not be able to log on Windows and you need to reinstall Windows. »

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  http://support.Microsoft.com/kb/940765

  If you are unable to connect to Windows 7 or Windows Vista, you can use the Windows Vista System Restore feature, or the Windows 7 system restore feature.

  You may be unable to connect to Windows Vista or Windows 7 in the following scenarios:

  • Scenario 1: You recently set a new password for the protected administrator account. However, you don't remember the password.
  • Scenario 2: You type the correct password. However, Windows Vista or Windows 7 does not accept the password because the system is damaged.
  • Scenario 3: You delete a protected administrator account. Now, you cannot connect to another administrator account.
  • Scenario 4: You change an administrator account protected with a standard user account. Now, you cannot connect to another administrator account.

  To use system restore to log on Windows 7 or Windows Vista when you lose access to an account, follow these steps.

  Note To do this, there must be a restore point from the system in which the connection was successful.

  1. Insert the Windows Vista or Windows 7 DVD, and restart the computer.
  2. When you receive the following message appears, press a key:
     Press any key to start from the CD or DVD.
  3. Set the following preferences and then click Next:
     • To install language
     • Time and currency formats
     • Keyboard or input method
  4. Click repair your computerand select the operating system you want to repair, and then click Next.
  5. Click System Restore, and then click Next.
  6. Click on the food that you want to use, and then click Next.

     Note Click a restore point that will return the computer to a State where the connection is successful. After you use the system restore feature, reinstall all programs or updates that can be removed. You won't lose any personal documents. However, you may have to reinstall programs. You may also need to reset some personal settings.

  7. Confirm the disks that you want to restore, and then click Next.
  8. Click Finish, and then click Yes when you are prompted.
  9. When the system restore process is complete, click restart to restart the computer.
  10. Once the computer restarts, click close to confirm that the system restore process has finished successfully.
  11. Use an appropriate method to open a session. For example, log in using an older password, or log in using another computer account.
  12. etc.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  http://support.Microsoft.com/kb/189126/en-us

  Tools third password

  Some third-party companies claim to be able to bypass the password that have been applied to files and features that use Microsoft programs. For legal reasons, we cannot recommend or endorse any of these companies. If you want to help to break or reset a password, you can locate and contact a third party company for this help. You use these third-party products and services at your own risk.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.

  Here's information from Microsoft, explaining that the policy:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

  _______________________________________________________

  Saving your files:

  You can remove the hard drive and put it in a hard drive USB enclosure > plug it into another computer > and try to read and copy your data in this way.

  Or, you can download Knoppix > make a bootdisk to > start your system with it (IF your material is all work) > and copy your data from the hard drive like that.

  http://Knoppix.NET/

  _______________________________________________________

  To reinstall the operating system:

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  And if you have never received a recovery disk when you bought your computer, there should be a recovery on the drive Partition hard reinstall Windows how much you bought your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Ask them to the proper key sequence.

  See you soon.

• Unable to connect on the computer of Windows 8

  I used my computer this morning.  When I went to sign this afternoon it says the password is incorrect, and I was able to reset my Microsoft account.  Reset the password using another computer, I am still unable to connect using the old password or the new password.  I am currently in line with the machine connected watch.

  Now I've lost the full use of the computer as it wont let me sign in.

  Help please.

  Hi Donna,.

  Thanks for posting your query in Microsoft Community and my apologies for the late reply.

  It is unfortunate that you are facing this problem. I would ask to refer to suggestions provided by Cliff_N responded on 7 December 2012.

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• Satellite L735-10V - unable to connect to the internet using ethernet

  I have problems connecting to the network via ethernet.
  connect the ethernet cable and the laptop connects to the net, but after a few seconds it disconnects.
  I don't know what the problem is.

  I tried to disable TCP/IPv6 and it doesn't work.
  Please can someone help me here.

  It's just killed me.

  It is not easy to say what may be the problem.
  Have you noticed the same thing using WIFI?

• Satellite L300D-10U - unable to connect to the internet using LAN and Win XP

  Hi all

  I had a very big problem with my card.
  I can t connect to the internet.
  I searched the forum but without any determination :(

  I did everything. I have checked ipconfig nothing, check the mode safe mode with local network nothing.
  Someone said too
  "(1) once the Ethernet is connected, power of the DSL Modem. Cycle." ("Some Modem picks up the MAC ADDRESS of the network card on where it was previously connected and restarting it redétecte this new")

  How to disable the modem?
  And another question: can someone tell me what works of LAN drivers in Sat L300D-10U on XP?
  I put t even know that :(

  Help me

  Hello

  The Satellite L300D-10U belongs to the series of PSLC0E and it supports the Realtek LAN card.
  LAN driver can be found on the page of Realtek.

  You ask how to disable the modem? I think you mean how to reset modem DSL
  Well, usually your modem should support an ON / OFF button simply turn it off and then turn it back on.

  If you are unable to access the internet then you should first check if your modem is properly configured and that the right data ISP (internet service provider) was used.

  Sorry, but that's all I can say right now I think you should just check your modem settings, make sure that the NIC is properly recognized and connect the model of the laptop using a LAN cable.

  All that s

• Printer HP Photosmart 5520: Unable to connect to the computer

  I recently set up my HP Photosmart 5520, including with web connected HP services. My laptop immediately after the passage of the printer, I am able to print correctly. However, after some time, the connection between the printer and the laptop is lost and when I try to print, I get an error message:

  However, if I send a mail with an attachment to the printer the printer still prints the document. This suggests that it is connected to the internet, but anyway not via WiFi for my laptop. Any suggestions would be welcome.

  Hey @mb218,

  Thanks for posting in the Forum from HP Support.

  I understand that you are experiencing connectivity problems when you use your HP Photosmart e-all-in-one 5520, printer in combination with your Windows laptop.  I want to help you with this.

  The first thing I recommend you try running HP and Scan Doctor for Windows printing.  Click here to install.  Ideally, this utility automatically detect and correct problems with the configuration of your software.

  If this basic approach is short, I recommend that you click here to access a HP article that provides more details and more intense network troubleshooting steps.  In particular, you may find that Solutions 2 and 3 are useful for strengthening your wireless connection.

  Please let me know the result of your troubleshooting by responding to this post.  If I helped you to solve the problem, feel free to give me a virtual h.o.t. by clicking on the 'Thumbs Up' icon below.

  Thanks again for your post and have a great day!

• Satellite A500 - 03P: unable to connect to the WLan using Win 7 + event message

  Hi all

  I recently bought the Satellite A500 with the offer included Windows7 while he was available late October 09.

  So I had the Toshibe DVD for the upgrade and followed the steps and Visa home premium upgrade to Windows 7. Now I have two questions.

  (1) I get a system event Notification after start, talk to me about the system event log. The full message is below.

  Unable to connect to a windows service
  Windows could not connect to the System Event Notification service. This problem prevents limited users to logon to the system. As an administrator, you can view the system event log to see why the service failed

  (2) I was able to use this laptop for the internet before the upgrade, both via a USB wireless drive as well to the office via a DSL modem.
  Now I can't access the internet after the upgarde of Windows 7!

  For example the Optus dial-up box pop up appears commandeLorsque I click on 'connect', it does not connect.

  Can anyone help please?

  Thank you
  C I

  Hey Buddy,

  (1) did you check the Configuration of the Service for this service? The Boot System Event Notification Service type must always be set to automatic. This service is absolutely necessary for Windows and shouldn't t be disabled or set to manual startup type.
  Check it!

  (2) to be honest I never heard on the internet BEFORE, but normally, it should also be possible to access the Internet with Windows 7.
  Make sure that the WLAN or LAN card is installed properly and check the TCP/IP settings. If you are missing some driver you can get on the page of Toshiba.