Router R6250 map shows TV but Samsung TV cannot find wireless connection

Similar Questions

• After a windows down I must reinstal Foto shop 13 items. I have a good internet connection, but the program cannot make a connection for singh to the top.

  After a windows down I must reinstal Foto shop 13 items. I have a good internet connection, but the program cannot make a connection for singh to the top.

  Log, activation, or connection errors. CS5.5 and later, Acrobat DC

• I'm trying to view the photos on my pc on my tv samsung, which has a wireless connection to the computer via the router. I spent a lot of time setting up, but it still does not work! Work.

  Recently I bought a Samsung smart tv I want to connect it to my pc so that I can view the pictures and videos on my TV. I have a connection through the modem but the pictures do not appear on the TV.

  I did the same thing only to realize that a standard USB cable will not work. Make sure that you connect your computer to your TV using a HDMI cable standard. They are not perfectly retangular than a USB cable and have edges around the corners of slightly rounded connectors. Can be purchased at most stores computers or shack radio for about 17 or 18 dollars 6 feet long.

• I have 2 orange records for professionals but Windows XP cannot find the CD - how can I replace the CD? __

  I have 2 orange folders for Windows XP Professional, but it is impossible to find the CD - how can I replace the CD?

  I made myself, and it will cost about $23 (assuming, of course, that you have the product key)...

  How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals...
  
  http://support.Microsoft.com/default.aspx?kbid=326246

• My mx6920 gateway upgraded to windows 7 now headphone works but no delegation cannot find the audio device

  I recently updated my mx6920 gateway for windows 7 and now, for some reason any laptop speakers will not work. The headphone jack works though. I tried to install the Audio drivers high definition on the RealTek site and was unsuccessful because windows has taught me that the driver is not the right one for the type of windows. Even when using the compatibility feature, does the same thing that I tried to use the Sigmatel drivers from the site of the bridge. These drivers ended up with the same problem. I checked Device Manager and it indicates that the audio device works. Who should ask me why do I hear audio from the headphone jack, but not the laptop speakers.

  any help you could give me would be greatly appreciated

  Thank you

  Hello

  We can refer to this article and check if that helps.

  http://support.gateway.com/us/en/product/default.aspx?tab=1&modelId=3155

  You can also contact Support technique Gateway here: http://us.gateway.com/gw/en/US/content/contactus

  Thank you.

• Media pending - WTF? !!!  I haven't changed a single parameter, but your program cannot find what I just changed with!

  How is that possible?  I can't reach someone on the phone - of course.  I thought you were better than this.  Do me a favor and let me know if I'm just trying to work in FCPX.

  I had not being pasted on the screen 'pending media' for both versions, but this used to happen quite frequently at the time CC (7.0). A way that I would like to clarify so was by disabling shall return it. Just go to the sequence > delete appears in the menu bar, see if that helps.

• Try to install the printer software, but it says cannot find Serscan.sys

  I'm trying to get an HP printer to work.  The software will not end because it cannot fine Serscan.sys.  As far as I know all my service modules are underway.  How can I get Serscan installed?

  I have no more drive.  I'm sol?

  I'm not clear on the problem now. If you can find Drivers.cab in the c:\Windows\Driver Cache\i386 folder, then you should be able to look inside the it with something like WinZip or WinRAR and extract the SerScan.sys file on a location that can reach the installation of HP.

  By the articles in the Microsoft Knowledge Base, I know that there are two legitimate versions of SerScan.sys, one for XP SP2 (ver. 5.1.2600.3029) and the other for XP SP3 (ver. 5.1.2600.5612). You need the right version for your own XP, so getting the Drivers.cab file on your own machine is the best method.

• Took a tip for disk diagnostic, but says error cannot find the software code. ???

  After you apply 2 updates, took a "tip" and tried to install diagnostic software.  Software says error not found code. ???

  New HP Pavilion 2500 with Windows 7.

  Hi Roger,

  Regarding the question, it's quite strange that your getting an error message when you try to create a disk diagnostic vision.

  I suggest you follow the link below to create the same and it also gives you the steps on how to use the HP Support Assistant tool as well.

  http://support.HP.com/us-en/document/c02491515

• Satellite T110-11U - cannot find the router WLAN

  Hello

  I have a Toshiba Satellite T110-11U. Have had since February and loved it-fortunately it wireless used throughout the House. Then one day on a month, unless I was in the same room that the wireless router, Wireless does not work. I have 2 other laptops (and iPhone) which still connect wirelessly throughout the House and the garden without problem.
  As you can imagine, it was very strange. When I take in the garden, my other laptops are all networks wireless in the region, but my Toshiba can't find any.

  Suspecting it was a driver problem, I made sure that the wireless drivers are up-to-date. With no joy, I got the system as it was at the time of purchase (do a complete restoration by interupting, starting and leaving the hard drive to be deleted and reinstalled etc.). Still the same problem. I even changed the rooms in which the router is, and the same problem - the Toshiba cannot find the router unless the router is located a few meters from the laptop.

  Until I lose the will to live, can anyone suggest the cause of my problems, or is it time I admitted defeat and brought back to the Comet under warranty (where likely test next to a wireless router and tell me everything is fine!).

  Thank you very much

  Steve.

  Hey Buddy,

  Did you check if the wireless network card is recognized correctly in the Device Manager? There may be a yellow exclamation or unknown device. Try also updating the driver WLAN from Toshiba Web site:
  http://APS2.toshiba-tro.de/WLAN/

  See all other WLAN routers?
  The wireless network card can be activated using a combination of keys FN + F8 and in the BIOS. In the BIOS, you should also load default settings and test again.

• I plugged a Linksys router for my Hewlett Packard desktop computer, it shows that it is connected with great resistance, but it won't let me connect to the web.

  I connected the router to my computer desktop Hewlett Packard, it shows that it is connected with great resistance, but it won't let me connect to the web. I also have a mid/fi through Verizon set up on this computer, but I have recently installed Magi jack more and it uses far too much data for the MiFi. What should I do to fix this?

  Hello

  ·         What is the error message or the error code that you get when you try to connect to the Internet?

  ·         What is your Linksys router connected to an Internet service provider?

  ·         Were there any changes made to your computer until the problem occurred?

  ·         What version of the Windows operating system do you use?

  Click on the link below.

  http://Windows.Microsoft.com/en-in/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

  To solve the problem related to the Magic jack plu and MiFi Verizon:

  I suggest you to contact Magic jack support. See the link below.

  http://MagicJack.com/customercare.asp

  Contact Verizon support. See the link below.

  http://support.verizonwireless.com/CLC/

  Provide us additional information. So that we can help solve you the problem on your computer.

  Hope this information helps you.

• Wireless connection unavailable on laptop, but shows all ok on pc and router

  I was at Midway through a conversation today on msn when my wireless connection (on my laptop) disappeared. I checked my pc and everything seems ok, here, my netgear router shows that everything is fine. When I click on 'Find a wireless network' his party! I can access the net very well by plugging it but as soon as I go wireless, I still lost.

  Tried to connect manually - says network with that name already there
  Tried to re start all
  All cables checked

  It's a laptop Toshiba L300
  Virgin cable broadband
  Router NETGEAR Wireless

  everything works fine as long as I'm using the cables.

  I only had my laptop and router wireless for a month.

  Please any other ideas what to do, I really need to be wireless for work as soon as possible

  Hello severina_falls,

  Thanks for posting on the Microsoft answers Community Forum.

  I have some suggestions for you to see if we can provide you with your wireless connection.

  (1) check that the WiFi switch is on on the front panel of your laptop. It is a quick check
  (2) Recycle the router wireless on and outside. Wait at least one minute, then turn it back on. Retest with your wireless network.
  (3) are getting you the error messages in the case where connects to deal with your wireless connection?
  To join the event logs: click on the Start button, right-click computer, click on manage.
  If you receive a notification of user account control , simply click on continue.
  Double-click Event Viewer. Study summary of the the event logs for errors dealing with wireless.
  (4) use System Restore to get your iIf wireless upward and running, you have a System Restore Point that was before starting the problem with your wireless network.
  Use the following KB to get the procedure on the system restore.
  936212 KB - how to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista
  http://support.Microsoft.com/kb/936212

  If please post again and let us know if it helped to solve your problem or if you need further assistance.

  Sincerely, Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• computer says router without wire is hidden, but he shows with stong signal

  My windows 7 says it cannot connect to my wireless router because it is hidden, but it worked fine for several months previously. Also, my computer is easily connected to other WiFi networks without problem, and as I said, it shows the router with strong signal.

  Hi Jimmie,

  Thanks for posting the request in the Microsoft community.

  You get the error message? If Yes, what is the full and exact error message?

  Method 1:

  See the article and try to run the Troubleshooter:

  Using the troubleshooter from network in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 2:

  I suggest you to refer to the article and see if it helps:

  How can I troubleshoot network card?

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-fix-network-adapter-problems

  Let us know if it helps.

  Thank you.

• Hi, I'm trying to put a song as my ringtone but I can't find the option "show in finder". Instead, it's show "show in windows Explorer..." Help, please... :( I use iphone with ios 5 9...

  Hi, I'm trying to put a song as my ringtone but I can't find the option "show in finder". Instead, it's show "show in windows Explorer..." Help, please... I use the latest version of itunes on windows 12.3 8...

  You won't show in Finder on Windows option. Use the one you have - display in Windows Exploler.

• Lenovo Y 410 - battery doesnot - shows 100%, but dies when disconnected

  Hello

  I have a Lenovo Y410 model, purchased in Nov 2007.It was my mobile favorite and best I've ever used.

  Only since the last morning, suddenly, the battery doesn't work.

  On power options the battery meter shows 100%, but when I unplug the power supply, the laptop dies instantly stops offshore.

  So, click Properties, it shows the battery details and said sound plugged in as well.

  I read some of the sons like resetting the battery indicator / voltage etc. control / battery replacement?

  Someone help me please...

  MARK_LENOVO has help everyone. If you're still here could you please help me.

  This problem happened to my other laptop (t41p) as well. So your help is very appreciated.

  Thank you much in advance.

  See you soon

  Dheeraj.

  battery flat, buy a new one.

• My designjet 430 printer shows ready but does not print troble shoot shows like loan

  I have a ploter deigns jet 430 I have not used for about a year, but I does not print. I got a new computer I put new ink printer it shows ready but I do not print or make noise but on my computer it shows as conspire, I hope someone can help

  Your first point of contact should be forums of HP.  Here you will find specific knowledge on HP printers.