Monitor allowed traveled Useage

Similar Questions

• Red icon Monitor allows on

  NVIDIA GTX680 (2 GB of Vram)

  I7 970 Hex Core 3.2 GHz

  4 WD Raid 0 Black (Scratch media) (50%)
  

  1 road export WD Black (60%)

  SSD drive C (75%)

  24 GB of RAM (21 GB for Adobe, 3 GB reserved for other progs)
  

  MB: Gigabyte X 58-OC

  Just recently started to use the SG and find it rather irritating. The reading is not playing back at the right speed is a bit slow. The display shows red icon. I've linked pp without effects or lut a project short (3 minutes). Image is of a Sony FS7 (XAVC Long GOP L50 50i) 1920 x 1080 25 fps - Slog3 Cine EI. The Prem Pro project was made and the cache has been cleared. Never had a problem using Prem Pro but SG is simply not playing ball. The disc icon is gray. His property is choppy and I hear some reverberation time - maybe just a problem of latency?

  No different when I reduce the resolution of reading. I use the Nvidia card to feed three monitors. NVIDIA drivers are up to date. In the Official Journal, the second monitor is active and I use for my full screen. Disable this place the video in the SG Office makes no difference - icon of the Red monitor - time a little slow what it should as before.

  Already my workflow consisted of ranking in Prem Pro - no problem. Resembling SG simply is not worth the hassle. Seem to think so, since the update, that I never had a problem. But if someone has an idea of what it is and if there is a "fix" I'd be grateful.

  SpeedGrade does not support the XAVC Sony MXF files. It can bring in files via Prem Pro and as a project Prem Pro, but trying to get in through the Media - no files shown - just a placeholder tab. I can see a few GoPro files and what not, but no (Intra or GOP), MXF MXF XAVC is not on the supported list. Here's my problem. Files put in the media (i.e. files supported) reading very well with the grey of the monitor icon.

  SG will not synchronize to MXF files - where the audio glitching. If their importation in the "color" tab forces SG to go 'no sync' where the red icon of monitor and incorrect reading.

  Adobe needs to make a statement on this subject. If FS7 users wish to use SG will take you to the proxy or convert a file supported compatible. Although Prem Pro manages the MXF XAVC codec wrappers, SG will not. A little while back you do not have Adobe?

  Your ' e welcome!

• SpeedGrade does not allow travel to Prores

  Hello!

  I have finished a project and am not able to export it.  I tried other codecs, and they all work.  I read somewhere about removing possibly looks that are not supported in prores, and it does not work.  I saw here other people having similar problems but was not able to find an answer.  I restarted the program several times and my computer.  I have FCP and the compressor so I should have prores on my imac (unless I have to install it somehow outside the program?  I just got a new computer...)

  It just stays at 0% and then says 'Done '.

  

  Here's a screenshot of my page rendering

  I've heard of an exchange of views which 4444 and 422 are not the same, as far as omnipresent installation will. What I would say, is to see if PrPro can export in ProRes4444 on your machine. If yes then you know you have the codec.

  Neil

• Power Button lockout allows me to turn the monitor off.

  A button on the front of my HP 2310e monitor allows me to turn the monitor off.  When I try to do a "Power Button locked" message.  How to fix this?

  Glad to know that your problem is solved. In case, if you need help, you can always post your questions as well as your valuable suggestions in this forum.

• Why did I get a notification saying "automatic downloads are not enabled on this unit, to allow them to go store parameters.

  I received a notification on my iphone saying "automatic download are not enabled on this unit, to allow, travel to store settings" is a normal notification because its never blown upward before and I had the phone for a year, the notification also happened on my ipad recently as well (well enough a day after notification jumped on my phone). Sorry if I seem paranoid I just hope that theres anything malicious on my device and the security has not been compromised.

  The two devices running the latest ios

  Also if you change the message too often it prevents edit you?

• P2715Q (4K) monitor, watch TV live HD via Mediasonic HW180STB?

  The Dell P2715Q (4K) monitor allows to watch TV live HD (OTA)? A converter box of media for OTA programming (Mediasonic HW180STB) who takes television to the power of a TV antenna, connectable via HDMI to P2715Q from Dell (4K) monitor to watch TV?

  (Could connect successfully it via HDMI... picture quality is great even if the HomeWorx HW180STB decoder 9media) can support a maximum of 1080 p!

• Cisco ASA - need to allow Ping and Traceroute

  Hello

  I am able to ping my remote counterparts, but can not trace.what I'm missing here?

  object-group service PING_TRACE
  ICMP service object
  service-object icmp traceroute
  the ICMP_ACCESS object-group network
  object-network 203.121.10.0 255.255.255.0
  host of the object-Network 222.77.187.292
  host of the object-Network 231.27.20.18
  host of the object-Network 198.18.171.220
  host of the object-Network 129.26.179.202
  host of the object-Network 218.192.63.146
  host of the object-Network 94.62.250.62

  #sh access-list Test_access_in
  access-list Test_access_in line 6 Note Allow set of hosts to PING and ANY TRACE on the outside - for monitoring.
  allowed to Access - list Test_access_in line 7 scope object-group PING_TRACE-group of objects any4 (hitcnt = 0) ICMP_ACCESS 0x48a9083e
  allowed to Access - list Test_access_in line 7 extended icmp 203.121.10.0 255.255.255.0 any4 (hitcnt = 0) 0xce1e8a24
  allowed to Access - list Test_access_in line 7 extended icmp host 222.77.187.292 any4 (hitcnt = 0) 0xf57d731f
  allowed to Access - list Test_access_in line 7 extended icmp host 231.27.20.18 any4 (hitcnt = 0) 0xb25e6675
  allowed to Access - list Test_access_in line 7 extended icmp host 198.18.171.220 any4 (hitcnt = 0) 0xd1f4dfa4
  allowed to Access - list Test_access_in line 7 extended icmp host 129.26.179.202 any4 (hitcnt = 87) 0 x 45874268
  allowed to Access - list Test_access_in line 7 extended icmp host 218.192.63.146 any4 (hitcnt = 0) 0x737f20fb
  allowed to Access - list Test_access_in line 7 extended icmp host 94.62.250.62 any4 (hitcnt = 0) 0x4223d717

  #sh run access-group
  Access-group Test_access_in in interface Test1

  #ping 231.27.20.18
  Type to abort escape sequence.
  Send 5, 100-byte ICMP echoes to 211.27.20.10, ti

  #traceroute 231.27.20.18

  Type to abort escape sequence.
  The route to 231.27.20.18

  1   *  *  *
  2   *  *  *
  3   *  *  *
  4   *  *  *
  5   *  *  *
  6   *  *

  meout is 2 seconds:
  !!!!!

  #traceroute 231.27.20.18 source Test1

  Type to abort escape sequence.
  The route to 231.27.20.18

  1   *  *  *
  2   *  *  *

  Hello

  You must enable error control icmp see all intermediate hosts.

  Policy-map global_policy

  class inspection_default

  inspect icmp errors

  Take a look at this link for the order reference:

  http://www.Cisco.com/c/en/us/TD/docs/security/ASA/ASA-command-reference/...

  The reason for this behavior is that by default ASA (a safety device!) allows you to hide all

  hosts on the path for messages time exceeded ICMP behind a NAT

  I would like to know how it works,

  Please don't forget to rate and score as correct the helpful post!

  David Castro,

  Kind regards

• Problem with the mouse when having double (multiple) monitors follow-up.

  I'll start with the configuration of the computer:

  The OS is Windows 7 Ultimate, 64-bit 6.1.7601, Service Pack 1

  Guest operating system is Windows Server 2008 R2 Enterprise Service Pack 1

  VMware Workstation Version 8.0.0 build-471780

  When I have multiple monitors allowed (the resolution is 1920 x 1080), I can't use the second monitor correctly.  In my setup main monitor is on the right, but the question I have also occurs when the primary monitor is on the left.

  In the screen below, I move my mouse to the center of the title bar and click and hold to drag the window.

  

  In this screen, you can see the outline of the window I am dragging to the left.  My mouse is now located to the left of the screen to the right about to cross the box to the left of the monitor.

  

  You can't see the mouse in the image 3 below, but I'm still it moves horizontally to the left.  The outline of the window, howvever, moves to the right and downwards.

  

  In this image of 4th, it is difficult to see the window is now pretty close at the bottom of the screen to the right, but my mouse is completely to the left.

  

  The last image shows that when I bring my mouse to the right (primary) screen, the window comes up to proper placement.

  

  Another finding is that, so Oh the right browser window and I just move my mouse to the left screen, the mouse will change the pointer and the browser would show the link in the bar which position of the mouse would be poorly determined to be on the right screen on a link in the browser State.

  Everything works fine if I keep just to single screen.

  Thanks in advance for any help on this matter.

  Ed

  OK, I've seen the same behavior with:

  Host OS 64-bit Ubuntu 11.04

  The OS Windows XP SP3 32-bit

  VMware Player 4.0.1 528992 build

  workaround that fixed it was uninstall VMware Tools on the guest (8.8.1 build-528969), reboot,.

  then install again with the host operating system were two connected monitors

  the upgrade of Joueur3 Joueur4, HW comments to 8.0 and upgrade update: tools, everything has been done with a single monitor for the host operating system... maybe something went wrong then.

  Post edited by: Hico

• Custom Agent monitoring-policy confusion

  Hello

  I am facing a problem with a custom field I added to my custom Agent's primary EPA. The LiveSet agent allows you to monitor the LiveSet (memory used after a full gc) of our application servers and the added field monitors allows us to add additional servers to monitor for this specific host.

  

  The field is not appear however in change them the properties of some agents (even after deactiving a reinstall of the agent and reapply the surveillance strategy.) (XML).

  

  I added via the Script Agent Builder agent and imported the surveillance strategy. XML for this agent.

                  d76917f8-61e1-46fd-ba18-7cd5e9da1289        SPI        LiveSet        Foglight4-XML        default        template                        ab2d11d8-d31b-4d9b-b5f2-a8f9b44c1f41                                                                            Platforms_supported                    WinNT4.0 Windows2000 Windows2003 WindowsXP Linux2.4 Linux2.6 AIX4.3 AIX5.1 AIX5.2 AIX5.3 SunOS5.8 SunOS5.9 SunOS5.10 HP-UXB.11                                                                        agentName                    Collector                                                                        cmdLine                    LiveSet.sh                                                                        purgeDays                    180                                                                        purgeTime                    Days                                                                        sample_freq                    60                                                                        monitors                    localhost:7191 localhost:7192                                                    
  

  I had some difficulty in setting this up, so I repeatedly tested, deployed and applied monitoring - strategie.xml for this agent, that may have caused the configuration in order to be a little confused.  But in the end, the script is able to pick up the field as an environment variable and to monitor the appropriate servers, at least on agents that allow to edit the field in the section change the properties of the FogLight Console.

  An export of the configuration show that there are 3 separate persistable-config-model elements with different config-id for agent LiveSet. Two of them are missing from the added field monitors . I think that there should be only one entry in the configuration, and this is the origin of the problem for some deployed agents.

  I tried to delete configurations incriminated through a groovy script

  cs=server['ConfigService']models=cs.getConfigs('SPI', 'LiveSet')
  
  a=[]for (model in models)  if (model.getId() == 'e326abb9-95e6-459c-a179-293fe559fa70' ||      model.getId() == '92e879a1-21fa-4713-8f0c-c481ec997feb')     cs.removeConfig(model)
  
  models=cs.getConfigs('SPI', 'LiveSet')
  

  but he will raise an error:

  com.quest.nitro.service.sl.interfaces.scripting.ScriptAbortException: script1000680: java.lang.RuntimeException: Removing default configurations is not permitted.
  

  So my question is, is my problem actually caused by a corrupted configuration?

  How to solve this?

  Hope you can help.

  Kind regards

  ISP

  Hi Brian,.

  Thanks for your reply. I uninstalled the cartridge and unfortunately configurations 'by default' always appears. Before I go ahead with the name change Agent, is ask you if there is really no way to cleanly remove this corruption of the configuration. I'd rather not stuck with this type of corruption even if it does not affect the stability of the duration of FogLight.

  Kind regards

  ISP

  ------------ update -----------------

  Hello

  I managed to clean configurations incriminated with a workaround using the following procedure.

  1. Export the configuration via the command line
     fglcmd.sh - usr - pwd cmd - f util:configexport
  2. Extract all the persistence-config-modelagent LiveSet s in a new control - strategie.xml
  3. Change the config_type of all the extracted elements to test
  4. Import configuration
     fglcmd.sh cmd - util:configimport - usr pwd - monitoring-f - strategie.xml
  5. Run the following in the Script Editor in the Console FogLight groovy script

  cs=server['ConfigService']models=cs.getConfigs('SPI', 'LiveSet')for (model in models)    cs.removeConfig(model)
  
  models=cs.getConfigs('SPI', 'LiveSet')
  
  remaining=[]for (model in models)  remaining += model.getId()
  
  remaining
  

  Make an another export confirms that incriminated configurations are deleted.

  Relocation of the agent and the application of the custom monitoring strategy works now.

  Brian Merci for your time.

  Kind regards

  ISP

  Post edited by: Fai Fung

• Scaling to external display

  I have a 2015 retina MacBook Pro with an external display k 4 (Asus PB287Q) and since the update for Sierra yesterday, I can select is more scaling "resolutions" which lie between 1920 x 1080 and 3840 x 2160. HD is far too big, far too small 4K. If you please, that there is a solution to this... I tried to restart, and it actually brought back the correct options until I closed the lid, and now they have disappeared and don't come back.

  That's what my display properties are similar (alt + click on Options):

  

  I had the same problem since the beta and still no word from apple. They completely borked seriously display drivers. I run dual monitors Dell P2715Q. A monitor allows me to choose the old scale with all the resolutions already supported 1080 p up to 4 k. 10.11 I could select the same resolutions on both monitors. Now I'm stuck with the resolutions that you mentioned on my second monitor. If I put my MBP to sleep and wake it up both monitors reflect the resolutions that show you without intermediate options between 1080 p and 4 k.

• How to detect / clean a possible Botnet?

  Hello, I just got a message from Time Warner Cable today telling me that they "detected signs of the botnet traffic being transmitted from a device connected to the modem cable to your connection Internet of Time Warner Cable."  I really hope they are wrong.

  I have 3 macs here on El Capitan, a Time Capsule and an airport express and a couple of Apple TVs/ipads/iphones and an Epson printer. I concentrate on macs... and I was wondering what is the best way to go about detecting and deleting everything that belongs to this botnet? It is my understanding that the bots are not viruses... or a simple anti-virus program work?  I never trust one of these programs and has always considered to be incomplete or part of an alarmist tactical cash grab. Also, I didn't have a program hogging resources analysis of the computer all day all the time like I used to have, on a machine windows, some time ago. But if I really have to in this case, I want to know what the Mac Pros use when there is a problem of any kind like that.

  I mainly use a machine and it was at one point yesterday with a more than the usual CPU. Incidentally I'm briefly to the preferences window security and privay on the mac about 30 minutes ago and initially it would not open. I got an error message saying something like "it wasn't available" or something to that effect. I had to run several times before it would open successfully.

  Until someone asks:

  1. Yes, I have a password long enough complicated WiFi (WPA2 I think)

  2. I don't see anything else on the network, except the devices here

  3. all devices are updated to the latest OS

  4. none have any sort of anti-virus installed

  Are you sure that the e-mail claiming to come from TWC is authentic and not a phishing attempt? Are Web sites, you should really visit sites of Time Warner, for example if so...

  I agree with your attitude to antivirus programs, steer well clear of them. Installation AV does not solve a problem on a Mac, it gives you another problem.

  Are you running torrents?

  Activity Monitor allows you to check the amount of network traffic and try to identify the responsible process by looking at the bytes sent/received columns.

  C.

• HP Elitebook 8560w: screen using my 8560w with the lid closed and external

  Hello

  I connected my 8560w to an external monitor via an advanced docking station.  My monitor allows me to switch between two sources.

  I intend my set-up for my future office and virtually all that my activity will be on the 8560w and the monitor.

  Can I run the 8560w for a long time with its lid closed without risk?  I was in Control Panel/power/choice what closing the lid does and all sleep on battery and nothing power are.

  Is there a heat problem? Or other side effects?

  Thanks, Russ

  It should not be unwanted problems to run for a while with the lid closed.

• How to connect a microphone to capacitor for Mac Book Pro?

  Hi all

  After recently to buy a NW-700 Neewer and set up, I plugged it on my which seems to me to be a model 2012 or 2013 the Mac Book Pro, only to see that he has been received as headphones and tab out of my sound preferences. I don't think that there is something wrong with the microphone as I had also bought and hooked to a phantom power source. After you pass the cables through the power source, I plugged my card TRS in a TRS FosPower additional to the PLUG adapter, knowing that Mac does not accept audio TRS jacks. And then after all that, I plugged this card into my computer which was accepted as a helmet instead of a microphone.

  I have a theory, that the FosPower adapter converts only the input signals and the computer then thought of as a helmet. What do you think?

  Here are some pictures to help.

  The Mic

  

  Phantom power

  

  Adapter

  

  Before the plug-in

  

  Once the adapter is connected

  

  

  Thanks for your help,

  G

  Hi garretthelp,

  I understand that you are having trouble to get your microphone Neewer NW-700 to be recognized as a device on your MacBook Pro.  If the TRS FosPower to adapter PLUG does not work for you, have you tried using an audio interface with standard XLR connections for your audio configuration?    Which application you use on your Mac?  No matter what settings are you using in the Mac system preferences should also be done in the settings of the audio application as well.  I will include information for GarageBand below for your reference.

  I found the Web site of the manufacturer of your product and enter the SKU for the microphone Support page, but they do not have a manual available at the moment.  So, if using an interface standard audio does not resolve the problem, you will need to contact Neewer for more information.

  Plug in a microphone

  You can connect a microphone to your computer to record your voice, an acoustic instrument or any other sound on an audio track in GarageBand. You can connect a microphone to the port of audio input of your computer, a USB port, or, for better audio, an audio interface connected to a FireWire or USB port on your computer. You can also use your computer's built-in microphone to record sound.

  After you connect a microphone, you choose the input source for the range that you want to save in, and then turn eventually followed. Monitoring allows you to hear you play so you can hear the part you want to record as well as the rest of the project.

  Connect a microphone to your computer

  Do one of the following:

  • If you use your computer's built-in microphone, select the Microphone as the source of entry into GarageBand > Preferences > Audio > devices.

  • Plug the microphone on your computer audio input port (if she has a), then choose integrated input as input source of the track.

    

• Connect a USB microphone to a USB port on your computer. Choose the USB microphone as input source of the track.

  

• Connect an audio interface to a USB or FireWire port, then a microphone for the audio interface for recording.

  

• Connect a console audio mixer or console in an audio interface connected to your computer.

Set the input for a microphone source

1. Select the audio track.

2. Click the Smart Controls to open the smart controls, and then click the Inspector button of .

3. In the recording settings section, choose one of the following on the shortcut menu of the entry:

   • If you use your computer's built-in microphone, choose the built-in Microphone.

   • If you use a microphone connected to your computer's audio input port, choose built-in input.

     If the integrated entry does not appear in the menu, choose GarageBand > Preferences, click Audio / MIDI, then choose enter integrated in the context menu of the Audio input.

   • If you use a microphone connected to a USB port, select the microphone.

   • If you use a microphone connected to an audio interface, choose the number of the channel for the microphone.

     If channels audio interface do not appear in the menu, choose GarageBand > Preferences, click Audio / MIDI, then choose the audio interface in the context menu of the Audio input.

   Make sure the format matches the microphone or instrument. Choose a mono for monophonic instruments (with a single channel), then a stereo input to stereo devices (with a pair of channels).

4. Drag the recording level slider to change the level of input to the sound source volume.

   If the recording level slider is dimmed, you cannot change the volume of entry in GarageBand. In this case, use the volume control on the unit.

Take care

• Two applications at the same time on the M200?

  On the Amazon website (and I'm sure elsewhere), it says on the M200:
  "With the optional Tablet Multi Dock station, you can connect an external keyboard and monitor allowing you to run different applications on screens separated at the same time."
  I've been reading my M200 and the multidock and it doesn't say how to do this. It seems strange when it's supposed to be something special you can do with the M200, he's not telling how you do! Could someone enlighten me please?
  Thank you very much

  Hello

  In my view, this means that the option of extended desktop.
  If the external monitor is plugged so that you can use this option to enlarge the display option. This option, you can activate with the key FN + F5 combination. If this option is enabled for example, you can open two widows of IE and one from this window, you can switch to the external display. In this case, you can use two applications at the same time

  Good bye

• How can I remove backup Mega?

  I have accidentally downloaded a program called Mega Backup. When I try to delete it, I get a prompt that says that I can't remove it because it is currently open. I closed the program and checked even through the force quit option and don't see anyway to close this program in order to remove it. For this program closed and deleted any help will be greatly appreciated.

  Please and thank you.

  CPT Mike.

  Activity Monitor allows you to locate and force the application to quit. After that, you can delete it.

  Use the monitor activity on your Mac - Apple Support

  Beware of fake Adobe Flash "installers".