Power Button lockout allows me to turn the monitor off.

Similar Questions

• Turning the monitor off

  Hello

  I use Lenovo U400 and I wonder if it is possible to turn off the monitor, only,

  Thank you.

  Hi CalciumKid,

  Lenovo U400 is not a hotkey to turn off the LCD, but as an alternative:

  If you are running Windows 7, press the F10 key and choose projector only. This will turn off the internal LCD monitor and switch to an external monitor (if you have not, it will simply turn the monitor off). To switch back, simply press the Enter key.

  If you are under Windows 8, press the F10 key and choose the second screen only. To switch back, simply press the Enter key.

  I hope this helps.

• My iPad is constantly in charge, even if not connected to a power source. Also, it allows me to turn the unit off. No idea what is happening?

  My iPad has always been in charge since I unplugged it yesterday and I thought that it might help if I turn off the device. But it turns out that he will not turn me off. I think it is causing other problems that I am more able to launch applications. I'd appreciate any help.

  Well it cannot be supported if it is not connected to power. So there must be a problem any which prevents the loading message on. Try to reset your iPad. Press and hold the Home button and the sleep/wake button until the Apple logo appears. Then release the button and let the appliance restarts. You lose no data by doing this. It's like a restart of the computer.

• the Power button lockout

  My HP2009f monitor showed power button lockout when I press the power button, I can be the way to solve the problem?

  Just hold the power button about 30 sec.
  This blocking activates / deactivates.

  C.

• Is there a need or a way to turn the pencil off the power when you do not use?

  Is there a need or a way to turn the pencil off the power when you do not use?

  Unfortunately not. The best thing is to turn off bluetooth. However, you will need to re - pair the iPad and the pencil again by plugging in the port of lightning. When not used the pencil of apple do not lose a lot of power.

• How to turn the camera off when I get the picture?

  How to turn the camera off when I get the picture?

  How to turn the camera off when I get the photo I do my iphone 6 mute and when I get the picture give sound

  Some countries do not allow phones take pictures of silent.  iPhones sold in these countries do not allow the sound picture to shut up.

• HP Officjet Pro 8600: Power light blinking and can't turn on or off

  Printer has power light blink and wll not turn on or off

  [Moved from comments]

  Hi neuserivergirl,

  1. have you made changes on the computer before this problem?

  2. which version of the operating system is installed on your computer?

  What version of the operating system Windows am I running?

  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

  You can disconnect the power cable from the plug, and then try to turn on or off.

  It seems to be a hardware problem, I suggest you contact the manufacturer of the printer for assistance on this issue.

  http://WWW8.HP.com/us/en/contact-HP/contact.html

• Windows Defender does not allow me to turn on or off. 0x800705b4 error code. Need help

  Windows Defender does not allow me to turn on or off. 0x800705b4 error code. Need help

  Hello

  If you use Norton, AVG, Avira, Microsoft Security Essentials, McAfee, etc. the default action is for Windows Defender must be disabled, that these AntiVirus programs have their own Antispyware Applications.

  There is nothing to worry.

  Using both programs at the same time can cause system conflicts, etc.

  If you are using one of the above AntiVirus programs, this Information from David O - Support Engineer shows you how to manually enable Windows Defender (disregard information from uninstalling; not possible in Vista):

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/how-do-i-manually-start-Windows-Defender-in-Vista/dab845b2-9ba5-47F3-9518-c4c6781e7d5b

  "Go to start, Control Panel, Administrative Tools, Services. Look for Windows Defender.

  Right click and select Properties , ensure that Startup Type is automatic.

  Once modified, click apply and OK.

  Quit and restart your computer. Check the back take the same path to confirm that Windows Defender has started"

  .

  If you want to have additional protection against malware using the version FREE of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  And for now, change startup Vista programs without using Defender, use one of these methods:

  "How to use MSCONFIG in Windows Vista"

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  Or the program Autoruns for FREE:

  "V11.21 Autoruns for Windows"

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

  See you soon.

• I got the message "SIM failure" on my IPhone 5.  The first time, I turned the phone off and turned it back on and it started working again.  I got the same message today and by turning the phone then next turn did not eliminate it.

  message "SIM failure" of "no SIM".  1st time it happened I turned the phone off and turned it back on and it was OK.  It happened again, and this time cut off and back on does not the phone is working correctly.  Cannot make or receive calls.  Nothing has ever changed with my carrier.

  First get a replacement SIM from your operator. If this does not fix it you have a hardware problem.

• error message 'there is a problem with the printer turn the printer off even more'

  I have a new 7525 HP photosmart HP printer, if it can find all the flashing lights with an error message on the screen "is there a problem with the printer. Turn the printer off on new"this does not solve the problem... Can't clear this error message!  Cannot use this printer!

  Hi sandrafranks,

  Thank you for your answer!

  In my view, it is unwanted material. Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. Language-country selector.

  Hope this helps and have a great day!

• Photosmart 7520 error: there is a problem with the printer. Turn the printer off, then on.

  I have a photosmart 7520 affected by the following issues.

  Issue #1: randomly, all lights start flashing market and the screen reads the following:

  Error. There is a problem with the printer. Turn the printer off, then on.

  I can't find a move that throws this to happen.

  #2 problem: When the printer is turned on and slowed down, also at RANDOM times, the printer will "Ding" followed by the flashing light wireless. So what sounds like the cartridges are cleaned, then a sound like the charger spinning or the printhead full running followed from one side to the other, then ending with a "Ding" and then back to normal.

  When this happens, the wireless connection is disconnected and then reconnected. Also, this disables the "Scan to computer" function on all computers on the network and manually requires the reactivation of all.

  From what I can tell the printer restarts itself.

  It is plugged directly into the wall outlet, no surge protector.

  Technical support has already go through the stages of the print head, me up to the top of the chain and eventually replaced the printer with a new brand.

  THE NEW PRINTER STILL DOES THINGS AS PRECEDENT.

  This printer is connected wireless to router Netgear N900. My all current computers running Windows 7, all are on the same network and workgroup and all are running Mcafee Total Protection.

  If someone is or has experienced the same or similar problems, I could sure use help.

  Solved myself.

• My iPad does not recognize not my Officejet 6500 has, unless I turn the printer off and then on again. Why?

  I recently changed my router from BT to Technicolor gateway provided by Utility warehouse.

  Previously, my iPad easily recognized my HP Officejet 6500 printer has (ethernet) but now this isn't unless I have turn the printer off then on again.

  Of course, it is a pain. How can I solve this problem?

  Thank you very much

  Hello

  It seems that the new router may not support multicast or was not configured correctly.

  Networking Hello Zero Configuration Apple is the method of communication used by any Apple device and relies on IP multicast.

  Some routers does not support multicast or maybe this option is disabled by default.

  I wouyld recommend contacting the Technicolor gateway serice provider and check if the access point supports multicasting, or it may require updated firmware or the specific support configuration.

  Kind regards

  Shlomi

• the power button is not impossible to turn work so I pad

  My I pad will not turn off you press and hold the power button down until the tour of her, but she died not just goes to sleep. In addition, it is not to connect to the internet, even though it says it's connected to the internet. anyone has any ideas. I can't also the connect to the computer to sync, because it does not recognize. ,

  Hello

  You should be able to use Assistive Touch because it has a digital power button. It works essentially the same. Turn on Touch Assistive

  For the internet problem, first try to reboot it now, then try to reset the network settings in settings > general > reset.

• POWER BUTTON LOCKOUT

  My new HP Pavilion Elite (m9525f) desktop PC, quadcore and my new HP Monitor (w2338h) don't seem to work well together and just purchased April 18/09.   When I want to close my monitor, connected to my turn I push the high power button on my screen and it will not turn off and I get this message "hold on power button?   I'm operating Vista Home Premium(64 bit) entered previously connected.  I called HP support and said the first time to turn my turn and while holding down the power button on my screen, I also had to disconnect the power supply for a minute (while holding down the power button) and then plug my monitor back in and turn on my Tower.  It did not work.  Then they told me to go in my monitor options and click default settings to rest and it does not work. Then I was instructed to go into my device manager, display seetings and uninstall my Navidia 9300GE driver, then reboot my system and it would be re - install, but this does not work either.  Finally, it told me to do a restore of the entire system to the factory settings and guess what?  He has not yet healed my monitor power button problem.  Please help or let me know if there is a solution that I'll remember the HP Support and give them a piece of my mind.  Thank you.

  Hello.  I finally found a solution to my problem of a HP Tech named Dallas who is in the State of Oregon. The solution has been to hold down the power button on my monitor with power, for about 25-30 seconds and finally my monitor off. I can now turn off and then on my screen without any problems. Thanks to Dallas from HP.

• Samsung Ativ tab 3 power button doesn't work does not, the device always at 0% battery

  I write about a Samsung Ativ tab 3 I bought recently.

  The item was bought September 26, 13, model No. is XE300TZC-K01AE. The morning of October 3, 13, I noticed that the screen was frozen and not unlock when you press the power button. After pressing the Windows button under the screen, login screen came and I was able to connect to Windows. On the home page, noticed that the battery was at 0%, although there were about 45% of charge about 7 hours at least. I plugged in the charger, but the battery was drained down and power off the device. If the charger is plugged in, the blue light was not on and also the device wasn't turning on. The charger was kept connected up to 16:00, but the unit was still not turn on. After several calls and discussion with Samsung, the unit was sent to a service center for repair and the 10 - Oct.

  The device worked absolutely very well once again, until last night. Yet once again, the device froze and power button did not work and the Windows button has been used to unlock screen after several attempts. Battery was showing 0% despite his accusation of 78% 15 minutes previously. The connection of the charger, the battery was still at 0% but not more. Fortunately this time around the closed device not down, but after 3 hours of connection of the charger, battery is always 0%. I would like to know any suggestions to help solve this problem. I tried to restart the battery APC controller in Device Manager, but there was no improvement. I am also attaching the powercfg command results.

  

  Rgds,

  Remy

  two days later... the solution seems to be to simply keep going & not connected until the battery is empty (support of important things upwards at the same time). The fact that it took several days, I understand that the warning 'battery 0' is part of the dysfunction. During this time, you can sleep it w manually control 'turned off' in the bar of charms, ensuring not to turn it off (cos then you will not know if the battery is still empty) and turn it on the original key w.

  Once the battery is completely empty (no response from the original key, little blue light by power button / stop), you plug it in and it works.

  My guess is that explains what has happened before, when I (and others I read) he sent for repair. At the time where he got at the workshop had drained the battery, so they connected, found it worked, and he came back with a message like "you must have forgotten to load," the missing issue.

  Let's see: if it is something that happens after a few months, & it's easily solveable, it isn't so bad. As much as we can always use it in the meantime that the battery is empty.

  Wonder if regularly leave the battery can drain ever few months would avoid the phenomenon?

  Be interested to hear what others have found.

  Rivka