Red icon Monitor allows on

Similar Questions

• The monitor is red, icons and images are pixelated, cannot open the help/support on this computer

  My daughter use XP on a netbook.  She booted up ealier today and everything that it was red.  The wallpaper image is pixelated, its icons are pixelated, there is a very long delay in obtaining different windows open, we are unable to access assistance help from his computer and go on the internet for more than 4 seconds is blocking the entire system for about 5 minutes.  We have tried to update the video driver, change resolution, scan disk, make the necessary updates, the soft start and starting difficult.  We have even uninstalled everything that was not essential to power his computer.  Nothing works.  Help, please.

  Hello

  You did it all change in software/hardware on your computer before this problem?

  I suggest you try the methods below.

  Method 1: Since the problem started recently, try to perform the system restore.
  Reference: http://support.microsoft.com/kb/306084

  Method 2: Uninstall the driver from Device Manager video card and reinstall it.

  Steps to uninstall from Device Manager:
  a. click Start > click run.
  b. type devmgmt.msc and press ENTER.
  c. now locate card video/display adapter and right-click on > selectUninstall.
  d. restart the computer this should install it the appropriate drivers for it. You can also download the latest version of windows XP drivers from the manufacturer's Web site and install it.

  Reference:

  http://www.Microsoft.com/windowsxp/using/helpandsupport/learnmore/finddrivers.mspx
  http://www.Microsoft.com/windowsxp/using/helpandsupport/learnmore/russel_02october14.mspx

  Method 3: Check if the problem persists in mode mode / safe network (step 1). If the problem does not persist in mode mode / safe with network then, perform the clean boot (step 2) on your computer.

  Reference:
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true
  http://support.Microsoft.com/kb/310353

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Satellite A300 - no sound, the "speaker" with a red icon

  Hey there!

  So, I got this Toshiba sat idle until I decided to restore it to factory settings and start using it again. I remember exactly if I didn't sound the last time I started before restoring it, but now, after three reinstalls I've still no sound, all I have is the speaker with a red x icon.

  This laptop is using Windows Vista 32 bit, I had no problem during the restore, everything has been properly installed except audio drivers. I'm sure I should have something in the sense of "Realtek High Definition Audio Driver" or something on the Manager devices, but all I have is "ATI HDMI Audio" and three devices not recognized and the only thing that appear on the output devices is "Realtek HDMI Output/ATI HDMI Audio" and say that it is not. Already tried to reinstall the Toshiba drivers, Realtek, even went as far as to try to force Windows to install the correct driver, but it ended in a BSOD.

  Then... I'm really at a loss. I really want to restore the sound, and I refuse to believe that there is no solution. The device is detected every time even though she has not recognized... Then... Am I missing something?

  Help, please. =(

  >... until I decided to restore it to factory settings
  Original recovery image contains all the necessary drivers for all hardware components, so its driver must be installed correctly.
  Can you please open the Device Manager and check the status of the sound card it.
  Please post comments.

• How can I get the icon that allows me to zoom in a larger type at the bottom of all pages

  When I'm in firefox, my impression is so small that I can hardly see it... i have done all the things that I learned and I got my type of font I like, but for some reason, that I can not get the size to change to a larger size... until my computer crashed and I had to do everything everywhere, this icon was there... on some pages, at the top of the page , I think that under Tools (which isn't on all of my pages) will allow me to zoom in for a larger size but in firefox, it is not can not... someone hele me with that?

  This Firefox support page helps you:

  http://support.mozilla.org/en-US/kb/how-do-i-use-zoom ?

• I am no longer able to afford and don't forget fast. I have to manually, click the red icon in the upper left to access. How to restore the automatic prompt?

  Yesterday, I visited a site to which I often, pingtest.net. Normally, when I visit this site, a thin horizontal bar appears at the top of the browser look at a framework. I don't remember what he said, but it spans the entire length of the frame, from left to right. On the right edge of the bar is a x, if I want to close. In addition, when this horizontal bar appears, I also have a box that is approximately six to seven times the height of the thin horizontal bar that appears on the left edge of the horizontal bar thin. This area extends across the width of about one-sixth or fifth of the width of the horizontal bar. It contains something like the following: show all, allow, authorize, and don't forget. I normally click on display all option, and I normally select Enable for all options now.

  Here's what happened yesterday: I went to pingtest.net, the horizontal bar appeared and everything seemed normal. However, I have not taken any action. Instead, I changed my mind and decided to go to a different URL. My slider was in the middle of the screen. I moved the slider up until I was intending to be the URL field, in order to enter a new URL. Unfortunately, I did not move the slider enough. So, instead of clicking in the URL field, I clicked right in the middle of the horizontal bar. I HAVE NO IDEA OF WHAT I CLICKED, BUT FROM THAT MOMENT TO WHAT THE HORIZONTAL BAR HAS NEVER REAPPEARED. WHAT I CLICKED, IT SEEMS THAT I LOADED FIREFOX TO NEVER PROVIDE ME THIS HORIZONTAL BAR AGAIN!

  As a result, I am also is more to get the box gray with the allow all display, allow and don't forget options.

  How can I find a normal behavior and get the normal horizontal bar and the normal box with the options to show all, allow, authorize, and don't forget?

  I do not know if you clear the "Site preferences" for the last time (s) would have effect if you would not do that immediately.

• I need the circular activity icon that allows you to be in the classic toolbar.

  Hi, I, m the need for points circular icon that notifies you that an activity is underway. Please let me know if I can get it back. Thank you very much.

  You want the back throbber. In my view, that it has been deleted. You can get a replacement of:

  • https://addons.Mozilla.org/en-us/Firefox/addon/throbber-restored/

• all the icons on my desktop have been replaced by media icons and allow me to acess them. How should I do?

  I click on google and it says media player cannot player this file.

  Help, please

  Hello foxx007,

  Go to the Start button and on the right side, click default programs.
  Click on the game to link your default programs.
  In the left column, select the program (highlighted) a list that you want to change the associations is default for file.
  To set all Assciations by default in the Program-
  NOTE: This will allow to associate the selected program by default used by Windows 7 to open all types of files and protocols it can open.
  Click set this program as default.
  Click Save to apply.
  Click OK.

  This tutorial can help too.

  Restore the .exe Windows Vista file association, after badly with another application
  http://www.Winhelponline.com/articles/165/1/restore-the-exe-file-association-in-Windows-Vista-after-incorrectly-associating-it-with-another-application.html

  Sincerely,

  Marilyn

• What happened to the low sharp arrowlike button/icon that allow me to navigate back (or forward) a history of strips multiple web pages at once?

  It was VERY BEST feature of FF and I blew it away and let this shit be updated. In my view, it disappeared ca FF 5 or 6, but it is a really useful tool.

  Right click to give buttons front and rear which stretched from from the history list.

  If you want to restore the drop down arrow, however, there is an add-on.
  https://addons.Mozilla.org/en-us/Firefox/addon/backforward-dropmarker/

• Monitor allowed traveled Useage

  We try to control the number of routes and non-traversal licenses used over time (daily/weekly/monthly).  We tried using the CDR report feature in TMS for gateways and VCS.

  I could get a graph for about two months, but I do not know how to interpret the results.  The chart attached is taken into account a number of licenses traversal/non-traversal used?

  Thank you.

  Hello Frank.

  You can find what you need by using TMS, but it is not as simple as you'd probably, unlike the graph you attached.

  Run the same report, you have done to get this chart, click the data tab.  It presents the call list, check all the ones you want, and then click view at the bottom.  From there, it will show you each call record and what type of license, he used, that it Non-Traversal or course.  You can export it to Excel, but you may need to increase the number of records displayed on the page until you click view to capture them all, or export them in small portions.

• I'm trying to update, but the creative cloud window freezes and shows a small window with the red icon cloud in. that neither of these respond to mouse, a beep is heard for error when you click it. can close only with windows Task Manager. I can send a sc

  

  uninstall the desktop application, cleaning by use the CC cleaning tool to resolve installation problems. CC, CS3 - CS6 and reinstall, apps download Adobe Creative Cloud | CC free trial Adobe

• Toshiba 640GB HDD Red Rocket - icon is missing

  Hi all

  I bought a Toshiba 640 GB Portable external hard drive (Red Rocket) - HDDR640E04XR
  http://www.toshibadirect.com/TD/B2C/Adet.to?poid=451941

  and even if specifically, I chose the option for NTFS, the installation program there in FAT32. Well I deleted my partition and reformat the drive to NTFS.

  The problem is that his beautiful and colorful official disc Toshiba red icon is removed and is replaced by the icon generic disk hard windows (I use Windows 7 64-bit). Where can I download this icon of red color again? (she looked like the Toshiba external USB disk, red in color)

  Thank you!

  Hey Buddy,

  I think that this special icon you want to say is stored on the local HARD disk. After formatting the entire HARD drive I think that it of deleted now and you can't do anything :(

  You should ask a friend who has the same model. In my view, that your friend can give you the icon again, but another solution isn't known to me.

  Good luck! :)

• HP PhotoSmart 3210 all-in-one: I NEED the icon on my desktop that allows me to do the scanning, cropping, the economy for this printer

  My computer crashed

  I got it running again (after taking it to the repair shop), but it must now install this icon that allows me to use all the features of the scanner.

  I have no idea where the disk is - I've looked everywhere, so I must assume he threw by accident (we had this printer for many years). It means that I try to find a way to do this without using the disk.

  I downloaded something on the HP site which allows me to use the scanner, but only allows me to reframe what I scan. This feature is extremely important for me because I use it for business and need to crop the photos all the time. For example, I tested it with a single photo 4 x 6 and it scanned all white spaces as well... which is usually not serious, but there is no feature of allowing me to reframe what part of the analysis, I wanted to save it.

  Please... oh please, please, please... let some knowledable, do-gooder see this post and help me with this...

  No, it wasn't she...  .. .but thank you very much for offering to help me

  BUT... After several attempts to search, we found what worked (oh, thank God!)

  http://support.HP.com/us-en/document/c03286146

  Click on the blue highlighted link in the first paragraph: HP print and Scan Doctor

• Power Button lockout allows me to turn the monitor off.

  A button on the front of my HP 2310e monitor allows me to turn the monitor off.  When I try to do a "Power Button locked" message.  How to fix this?

  Glad to know that your problem is solved. In case, if you need help, you can always post your questions as well as your valuable suggestions in this forum.

• that indicates arraw little red color in the icon forms in oracle forms?

  Hello

  I work at the project of forms already developed. In a canvas, icon of data blocks there is a red arrow image small. Can you please that shows that?

  Hi bootsrap,.

  Regardless of the component has small red icon, that means this component is subclassed, so you must set the property to.

  Right-click on this Palace data block property subclass control

• What is the HP Digital Imaging Monitor? Apply to my operating system, Windows 7?

  What is the HP Digital Imaging Monitor? Apply to my operating system, Windows 7? I want to remove the icon from the task bar (toolbar in the lower right corner of the screen) that I never use it.

  Picardjc wrote that "Digital imaging monitor is part of the HP software that communicates with your HP printer. This program allows to read the inklevels, get an out of paper message, scan from the device to the computer and so on. It is not necessary, but it will restrict the use of printers if you delete. "Understood. But for my printer HP Officejet Pro 8000 A809a, what is the purpose of having the digital imaging monitor icon in the taskbar Windows7 sp1 of the Notification area (aka system tray)? My A809a is NOT an all-in-one that includes a scanner; It is simply a very good printer. When I start to print something, if you need ink or paper, that information is displayed on the screen of my computer. So I ask again: why is the icon of monitor digital imaging on the taskbar? I clicked on at the time of this icon (I not print anything, but as usual, the printer is turned on), and nothing happened. R.N. (Roger) Folsom _ P.S. below I'll post some other discussions (with links to their locations) of the digital imaging monitor, I discovered before finding this site on which I am writing. There are a variety of opinions on what makes the digital imaging monitor. HP Digital Imaging Monitor is for HP director system tray access. This is necessary if you want to use the buttons of all-in-one on a HP printer all in one to scan documents or transfer photos from a camera manually. Closing the icon monitor HP digital imaging in the Windows system tray can cause the HP all-in-one to lose part of its scanning features and not the connection error message. In this case, you can restore all functionality by restarting the computer or by starting the HP digital imaging monitor. SOURCE: Yahoo http://answers.yahoo.com/question/index?qid=20080115093754AAlajpq - Re: REMOVE HP Digital Imaging Monitor of Systray? [Edited] 03/08/2011 14:05 - edited? 03/08/2011 14:08 Yes, it is safe to remove. In my view, it is usually in the program group under start / all programs / startup. Simply navigate under the Start button, right-click on it and delete! If it is not there, then remove it from the registry: run regedit and go to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run and delete it from the list in the right pane. If she is not there, then try hkey_current_user\\software\\microsoft\\windows\\currentversion\\run it's better than using msconfig and uncheck it. In my opinion, msconfig must always be set to Normal startup. Your printer will always print without that annoying obstructive utility called Digital Imaging Monitor. Ciao! Casey Henderson, MCP SOURCE: http://h30434.www3.hp.com/t5/Web-Printing-Software/REMOVING-HP-Digital-Imaging-Monitor-from-Systray/td-p/253515