Monitor only 3 groups in VMWare and include the ESX and virtual machines that are running in this cluster

Similar Questions

• We have configured replication vsphere in our environment and when replication is triggered according to the OFR start us below the questions on the virtual machines that are configured for replication

  Question: We have configured replication vsphere in our environment and when replication is triggered according to the OFR start us below the questions on the virtual machines that are configured for replication.

  Version for esxi: Patch 5.1 level 7

  Virtual center of version 5.1

  Source of storage - IBM v7000

  Destination storage - Hitachi

  
  Questions:
  Events of breach RPO
  Consolidation for the VM disk failure
  Delta abandoned events
  Time change events
  NTFS error and warning (event ID: 137, 57)
  RDP disconnect and ping does matter
  Standby error
  Volsnap error
  Stop the server and offline issue
  Install vmtools emits automatically

  well, in this case, we need to disable the standby of the end of the replication.

  So that everything in triggering replication does not trigger the snapshot of the suspension.

  Then test the if you get these errors.

• Not possible to export a list of virtual machines that are created in the past 7, 30, 120 and 180 days since an imported csv file containing the date of creation of virtual machine

  Not possible to export a list of virtual machines that are created in the past 7, 30, 120 and 180 days since an imported csv file containing the date of creation of virtual machine. My questions is the correct statement to the variable: $VmCreated7DaysAgo: $_CreatedOn "-lt" $CDate7.

  # #SCRIPT_START

  $file = "C:\Users\Admin\Documents\WindowsPowerShell\08-18-2014\VM-Repo.csv".

  $Import = import-csv $file

  $VMCreatedLast7RDayRepoFile = "C:\Users\Admin\Documents\WindowsPowerShell\08-18-2014\Last7Days.csv".

  $start7 = (get-Date). AddMonths(-1)

  $CDate7 = $start7. ToString('MM/dd/yyyy')

  $VmCreated7DaysAgo = $Import | Select-object - property name, Powerstate, vCenter, VMHost, Cluster, file, Application, CreatedBy, CreatedOn, NumCpu, MemoryGB | Where-Object {$_.} CreatedOn - lt $CDate7} | Sort-Object CreatedOn

  $TotalVmCreated7DaysAgo = $VmCreated7DaysAgo.count

  $VmCreated7DaysAgo | Export-Csv-path $VMCreatedLast7RDayRepoFile - NoTypeInformation - UseCulture

  Write-Host "$TotalVmCreated7DaysAgo VMs created in 7 days" - BackgroundColor Magenta

  Invoke-Item $VMCreatedLast7RDayRepoFile

  # #SCRIPT_END

  You can use the New-Timespan cmdlet in the Where clause, it returns the time difference between 2 DateTime objects.

  An example of this cmdley

  New-TimeSpan-start (Get-Date). AddDays(-7)-end (Get-Date). Select days - ExpandProperty

  In your case, you could do

  Where {(New Timespan-démarrer ([DateTime] $_.))} CreatedOn) - end $start7). {7 days - gt}

  But beware of negative numbers.

• The list of all names of virtual machines that are attached to the computer with script group

  I need a script that would list all the virtual machines names that are attached to the Machine group as the bellows screenshot:

  

  
  

  Ce can be in any language I just need to get this information.

  I tried to Watch in database and found vm names of in table [ecm_dat_machines] and Group of/ids in names of table [ecm_sysdat_machine_groups] but I don't find table that would be assign vm to the Group.

  I serait appreciate any help or clue as I already spent a lot of time on this task.

  Attached file of import/export includes a view created for the SQL below, as well as a SQL report that uses this perspective to the computers by group in the VCM UI.

  Note that the functions used in the join of the query criteria are there to ensure that only valid/active/license machines are displayed, these date data and time are adjusted to the time zone of the user, and that the users do not see that their role does not have access to groups of computers.

  SELECT

  m.machine_name,

  mg.machine_group_name,

  mg.machine_group_desc,

  DATEADD (mi, utc.utc_offset, m.date_last_contact) as date_last_contact

  OF dbo.ecm_dat_machine_group_machines_xref mgx

  JOIN dbo.ecm_dat_machines m

  ON mgx.machine_id = m.machine_id

  Join dbo.ecm_dat_machine_groups mg

  ON mgx.machine_group_id = mg.machine_group_id

  JOIN dbo.ecm_dat_roles_machine_group_xref rmx

  ON mgx.machine_group_id = rmx.machine_group_id

  AND rmx.role_id = dbo.role_current)

  JOIN dbo.ecm_fn_machines_valid_t (vm)

  ON mgx.machine_id = vm.machine_id

  JOIN dbo.ecm_user_utc_offset (utc)

  1 = 1

• need a script to find vmware tools does not not on virtual machines

  I need a script to find the virtual machines running without vmware tools?

  Hello, nareshunik-

  You can add an extra point to the filter to include only the virtual machines that are on, as:

  ## get names of powered-on VMs that either do not have Tools installed, or on which Tools are not currently runningGet-View -ViewType VirtualMachine -Property Name, Guest.ToolsStatus -Filter @{"Guest.ToolsStatus" = "toolsNotInstalled|toolsNotRunning"; "Runtime.PowerState" = "PoweredOn"} | Select Name, @{n="ToolsStatus"; e={$_.Guest.ToolsStatus}}
  

  How does do for you?

• How to create the home group and how to connect two computers that are running windows 7. and also Remote Desktop connection!

  Someone help me how to create the home group and how to connect two computers that are running windows 7. and also Remote Desktop connection!
  step by step information!

  Hello

  I suggest you to refer to the links and check if it helps:

  Create a homegroup

  http://Windows.Microsoft.com/en-us/Windows7/create-a-HomeGroup

  Join a homegroup

  http://Windows.Microsoft.com/en-us/Windows7/join-a-HomeGroup

  Setting up a network home

  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-home-network

  Remote Desktop connection

  http://Windows.Microsoft.com/en-us/Windows7/products/features/Remote-Desktop-connection

  What types of connections remote desktop should I allow?

  http://Windows.Microsoft.com/en-us/Windows7/what-types-of-Remote-Desktop-connections-should-I-allow

  Remote Desktop connection: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/Remote-Desktop-connection-frequently-asked-questions

  Let us know if it helps.

• I sign creative photography cloud in March 2014, at that time was include 20 GB of free web space, and also the Prosite, now Adobe out of this and told me that I never had this has always been just 2 GB.

  I sign creative photography cloud in March 2014, at that time was include 20 GB of free web space, and also the Prosite, now Adobe out of this and told me that I never had this has always been just 2 GB.

  This happen with others, they just change and cut without notice?

  Please check the storage now & confirm, it should be 20 GB now, let me know in case of any question.

  Concerning

  Stéphane

• Space disk in VMware player management and virtual machines

  I have VMware Player installed on a computer with Windows 7.  I installed VMware Player on the C drive where Windows resides. I have a VM installed, which is Ubuntu 10.4LTS.  My hard drive is 250 GB.  DRV is about 47GB and about 9 GB is free.  The rest of the hard drive is not allocated.

  If I install any addition of VM, looks like I may need to extend C to enlarge.  Or, if I add the partitions via the host OS, i.e. of Win 7, can I appoint a different partition during the installation of another virtual machine?

  I hope I have it clear.  If this isn't the case, please ask for clarification.

  Also, could I have installed VMware Player on one partition other than C

  When I initially installed it?

  You can uninstall VMware Player WITHOUT damaging your existing virtual machines.  Then you could go ahead and create a new partition and then re-install VMware Player, then move the virtual machines on the new partition and then reopen.

• Difference between the hosts and virtual machines

  Happy new year!

  I guess that's a stupid question, but I don't know the answer to it.

  I created pools from VM. Some jobs in the pool are hosts and some virtual machines. What is the difference between the hosts and virtual machines. I thought I could only create virtual machines, but I guess I could create hosts as well. -What happened?

  Thanks for your help.

  where does say desktops are hosts?  A host is usually referring to an ESXi server.  A virtual machine is just the guest OS running on the host computer.  A pool is a group of VMs that can extend over several hosts.

  Gunnar

• VMware 6.5.5 cannot import the virtual machine that uses 2GB "disks of split.

  Hello

  I'm using VMware Workstation 6.5.5 under Win XP. I tried to import a virtual machine that was created by using the option 'Split' virtual disks into files of 2 GB. The import fails and presents a pop-up: ' Conversion Assistant/cannot determine the guest operating system. The log file includes the line "could not find the disk cofortcol3v01 - cl1.vmdk. This file does not exist of course, there are more files cofortcol3v01-cl1 - s001.vmdk, cofortcol3v01-cl1 - s002.vmdk and so on. The machine virtual original (cofortcol3v01) has been created under VMware Workstation 5.1, and it does not under Workstation 6.5.5.

  Is this a known problem in the conversion utility? Is there a work around for this problem?

  Thank you.

  -Phil Anzel

  FYI... VMware Workstation peut import a Virtual Machine that uses twoGbMaxExtentSparse discs.

  The log file includes the line "could not find the disk cofortcol3v01 - cl1.vmdk. This file does not exist of course, rather there are files cofortcol3v01-cl1 - s001.vmdk, cofortcol3v01-cl1 - s002.vmdk and so on. The machine virtual original (cofortcol3v01) has been created under VMware Workstation 5.1, and it does not under Workstation 6.5.5.

  Is this a known problem in the conversion utility? Is there a work around for this problem?

  The problem is that you're missing the "disk DescriptorFile", "cofortcol3v01 - cl1.vmdk" and which is why it's a failure and not a limitation of the Conversion utility.

  Also if you actually had a Virtual Machine created in VMware Workstation 5.1 you can simply run directly under VMware Workstation 6.5.5 without having to run the import command.

  Anyway, if you have a backup that you can recover the file "cofortcol3v01 - cl1.vmdk" then you should be fine and if you have not then a new can be created.  If you can archive (compress) files vmware*.log (usually 4 of them) in a single zip file archive and tied him to a post in response, then one of us will create a new file "cofortcol3v01 - cl1.vmdk", based on the information contained in files vmware.log for you, if you don't know how to do it yourself.

• Virtual and Virtual Machine Center

  I have a Virtual Center installed on a physical machine, I would like to upgrade the servers, but as a backup plan, I want to convert this machine to a virtual machine, in the case of what be wrong with the physical server gose, I know at this time, I won't be able to connect to the virtual Center It is anyway to power on the virtual machine that has the virtual centre of the command line. and I can only connect to the server ESX directly via SSH?

  You can use this logged as root - vmware-cmd /nas/vms/FreeBSD/FreeBSD.vmx startas as an example to start a VM FreeDSD stored on a NAS device

  If you find this or any other answer correct please consider giving points by checking the correct or helpful answer

• Report on the ability of virtual machines VMware Cluster

  We started to evaluate Foglight for capacity planning and evaluation. One of the reports that I believe is interested in our leadership is the "ability of virtual machines VMware Cluster" report. I see that the report provides a value for the VMS remaining. I would like to learn a little more about this value and how is it calculated:

  1. What exactly a 'virtual machine' represents in these reports?
  2. Can a similar report to run using a specific type of server based on the allocation of resources or patterned after an existing VM wokload?

  We are a small, medium and large VM offering based on the allocation of resources. I would like to change the report to display the number of each type of virtual machine I have available... or pointer pointing to an existing virtual machine, and according to its resources and workload, determine how this server, I have available.

  It is based on the average size of the virtual machine in the cluster.  If you look at the dashboard of capacity management in the user interface, it can give you more details by cluster.  It is based on the average of the use of min/max/AVG across all virtual machines in a period given (usually 90 days).  This can not be changed today, but there is work to allow lets you specify a size of slot for something as small, medium, large, etc...

  This feature exists in the Foglight for virtualization, however Standard Edition.  It might be interesting to watch this, if you need it sooner.

• Several processes that are running on the standard user account because it runs slow and internet does not "."

  Create a user profile for children on PC 32-bit W7 with MS Family Safety.

  Recently they have complained he "runs slow and internet does not work.

  After playing for a little, I realized a ton of processes were running in the background. I couldn't run msconfig to their profile (not administrator) and after some research, I even if the profile has been corrupted.

  I created a new profile, but now the same thing is happening a few days later.

  See below; multiple copies of the same process are running. This happens within 2 m after the log-in and I only started one program.

  I started in safe mode with network and ran Windows defender, Spybot S & D and my virus scanner (all full scans) and turned up nothing malicious.  A few cookies tracking in the web cache, but nothing out of the ordinary.  I searched for the files wlaacmgr.exe and dplaysvr.exe (b/c they do not appear running in my admin profile) but they were found only in windows OS directories.  I understand that they are files of W7 but some maleware recreates.

  Many of them are the same files taking up process on the old profile that I deleted.

  Any help or suggestion as to why I have multiple copies of large processes running on the machine?  As I wrote it, I sign in, seems to be fine for one but 2 minutes a lot of process appear repeatedly and slows down the computer to a crawl.

  These two files listed are not at all on my admin profile and the machine works fine in my admin profile.  Even with open Photoshop, the CPU is only about 50% under my profile.

  Try to check/change the entries in startup with Autoruns from Sysinternals, which should work on the limited account to see its startup items.

• I have 2 computers that are running windows 7 prem 64 bit family. I'm trying to set up a home group, but does not recognize my extra computer. It is on the network. I have a netgear router wnd3500

  I have 2 computers that are running windows 7 prem 64 bit family. I'm trying to set up a home group, but does not recognize my extra computer. It is on the network. I have a netgear router wnd3500.

  Hi Mark,

  Thank you for writing to Microsoft Communities. The description of your problem, I understand that you have problems setting up a homegroup with Windows 7 computer. Please correct me that I misunderstood.

  
  

  Mark, please don't worry I'll try my best to resolve the issue.

  I suggest to go through the following websites, which provide a detailed description on the homegroup and how to set up.

  Home Sweet homegroup

  http://Windows.Microsoft.com/en-us/Windows7/help/home-sweet-HomeGroup-networking-the-easy-way

  Homegroup from start to finish

  http://Windows.Microsoft.com/is-is/Windows7/help/HomeGroup-from-start-to-finish

  If you're still having trouble to set up the residential group, please let us know. We will be happy to help you.

• "you met a serious error, serious errors can be caused by many things including the virus... "How can I solve this problem

  Hello United team, I installed recently the 'command and conquer zero hour', but when I open it this error pops up "you have experienced a serious error, serious errors can be caused by many things including the virus..." "How can I solve this problem

  "You met [a] serious error...". "It would be interesting to know what software gave this message. The game? Windows? Unlikely, I've ever seen a strange warning like this. Is it followed by a Board, what to do next? -I'm asking this because many "rogue AV" programs use similar messages to push users to install their "security solutions" = malware that contains and spreads viruses, he warns against.