Monitor problem - gray without image areas

Similar Questions

• problem with scanning/image area for hp photosmart 2610 WIN XP

  Well well probably XP is half the problem since it is no longer supported... But I am havig problems scanning anything on my hp photosmart 2610. Area of the image go up and keeps telling me to insert my all in a disc and I evetually must use master to close the processes of HP. I tried everything to have HP on the phone (for 4 hours) and they could not uninstall and reinstall new drivers so not that I have two monitors of image digital hp running. Printing is not a problem but pulling to the top of photos and attempt at analysis of the new photos just do not work. I have the original disc of photosmart hp, but when I put it in my dvd player I get a message to put in an all in one disc I did not. I even downloaded the latest driver from HP and tried running that, but it does not say that it is alread installed... Should I just delete anything that has to do with my printet hp and then run the installation of new I removed the HP site? It makes me very nervous because I can print at least currently... If I delete everything and the installation fails, I can't live with printing capabilities. However, I want to be able to scan your photos of family, etc...

  Thanks for the help

  Robert

  Cheetah12

  Thank you for the information, he worked with a few minor changes since my system was a mess. But I would never have solved the problem without help...

  Great job

  Bob

• Hi, my camera and video images are upside down, how can I solve this problem

  Hi my camera and video images are upside down, how can I fix this problem

  If it is in Windows (live) Photo Gallery, select the pictures that are backwards, right click, then select rotate (in the clockwise or counterclockwise). repeat if necessary. teengeek.freehostingcloud.com

• Hi, I use lightroom 5 and have been for several years.  Today I imported several batches of today images from different cameras without any problem, but the images of a particular card (with an incredibly large memory) does not matter.

  Hi, I use lightroom 5 and have been for several years.  Today I imported several batches of today images from different cameras without any problem, but the images of a particular card (with an incredibly large memory) does not matter.  I see other people have had similar problems, but I am not able to follow these solutions and would very much help here.  I have an IMac.

  If you had probably two problems

  Permissions, the other is the hardware problem causing slow import and the card cannot be read by your operating system.

• Overview of the LR5 does not. Just updated iMac 2010 with ssd, 32 GB of ram and El captain and all imports new previews are gray. The images are there, can work on them and then they appear in the preview. All records older still work fine just new downlo

  Overview of the LR5 does not. Just updated iMac 2010 with ssd, 32 GB of ram and El captain and all imports new previews are gray. The images are there, can work on them and then they appear in the preview. All records older still work fine just new download does not work. Help, please!

  Please try and delete preview Cache.

  It is located in the same folder as the catalog in Lightroom. The name of the cache an extract ends with Previews.LRDATA and should be deleted. Not to be confused with *. LRCAT, which should not be deleted

  Default location should folder of the image.

  Kind regards

  ~ Mohit

• One of the pages of my site moves to the right when using anchors to scroll. I checked for Ghost off the page boxes and checked that all my 100% width images are actually 100%. I discovered that this problem is in Chrome and do not hap

  One of the pages of my site moves to the right when using anchors to scroll. I checked for Ghost off the page boxes and checked that all my 100% width images are actually 100%. I discovered that this problem is chrome and does not happen in Firefox. Any suggestions?

  Thank you Brad, my ankles were lined up however they were in the Center. I am proposing to-100 and it solved the problem. Thanks for your help.

• My images are upside and gray scale. On another computer, it loads fine - any suggestions?

  My images are upside and gray scale. On another computer, it loads fine - any suggestions?

  Thanks for the info-2 restarts later and it works now. If it happens again, I'll try a more complex approach.

  Thank you!

• I just bought a DMC-TZ70 Lumix, but thw RAW images are not supported in the elements.  Is there a way to turn the problem?

  I just bought a DMC-TZ70 Lumix, but thw RAW images are not supported in the elements.  Is there a way to turn the problem?

  According to this faq:

  FAQ: Photoshop Elements will work with my camera, or why does not open my raw files?

  Devices supported by Camera Raw

  your camera requires the ACR 9.0 module which is only available in PSE13 after update (menu help/update).

  If you have an older version of elements, the free solution is to use the DNGconverter mentioned in the faq above with the download links.
  This stand-alone software converts all of a folder of your raw files to DNG format raw that older versions of items can read and modify.

• Upgrade to Acrobat XI. All images are now grayed out.

  Upgrade to Acrobat XI. All images are now grayed out. What is going on? Everything else seems to work. My system seems to work fine. I have all the latest upgrades. Windows 7, 32-bit; Update video software. I'd appreciate any help.

  Thank you. I saw the solution in another discussion. I had to uncheck "Enable enhanced security" in the preferences.

• Monitor LCD Dell blurred the area to the right of all the data on the screen.

  Left of the screen and all printed edge areas of the display have a fuzzy section that extends to the right. Like a picture but all the shades of gray without data

  Found the problem.  Cleaned the video card in the back of the monitor.

• The images are visible in the module development only.

  I can see my images only in the develop module and with the layering of cultures under tension. I don't know why. Probably accidentally changed a setting.

  I think that the most common problem like this has been resolved one of the two following ways: monitor profile has been altered, or the preferences have been corrupted.

  Considering that all your images are gray, I'd start with the monitor profile.  Set your profile to soemthing else and see what happens when you restart LR.

  See you soon!

• the imported images are there but does not appear

  Hello

  I'm new to Lightroom, but not to the digital imaging.  I am deciding whether or not to use Lightroom as archiving software.  I have imported photos with various types of files in Lightroom, copy them into the default location and convert NEF photos in .dng files.  Everything seems as it should in what concerns the lists on the left, and the files are where they are supposed to be in the default locations and are operable and viewable in photoshop.

  The problem is that everything that is displayed in the environment Viewer are rectangles greyed.  No images.  Can I export an image in a different file type to an external location and display it correctly.  So all the images are there and LR know where they are (since he created and put them there).  The film in low also rectangles is just gray.

  I have no idea what prevents images from appearing and I hope someone here can help.  I am running XP SP3 and Lightroom 2.5 632038 Raw 5.6.  I import files NAVE of Nikon and a D300 camera Coolpix 4000 Scanner.  Photoshop reads all of these pictures raw with their plug-ins.  Moreover, I also imported jpg and tiff files and they do not appear in the screen either.

  Thanks in advance

  dmm108

  Believe it or not, your monitor profile is corrupt. A corrupted profile can sometimes manifest only in LR and not in other programs managed by color as Photoshop.

  Either use a hardware standard, which is the best thing (look up on the web Spyder), or modify your monitor profile by default in sRGBxxxx, with the rest of your profiles. On Windows XP, you can do this through control of management/display/settings/advanced/color of the Panel. Make the second of these two things is really just a stopgap. If you don't calibrate it with a hardware device, you will always have incorrect colors.

  Anyway, to convince yourself that the profile is in fault, change it in the color management.

  HAL

• Some Web Sites display blue text on the left without images

  It doesn't matter what browser I use, some web sites appear as single text in blue on the left without images in all. I am very frustrated and tried all sorts of things: empty my cache, my history of clearing installation of flash, shockwave, java installation, etc. Anyone know how to fix this?

  Style sheets are the rules for the display of the items on the page. For example, change the list of links of chips in a horizontal row without underscore is done with style rules.

  This page on worldnews.nbcnews.com gets most of its stylesheets to a completely different server, www.cdn.newsvine.com. If a filter is binding "third party" content (there may be other names for it) which could explain why the problem occurs on some sites and not others.

  Try to disable all filters of content including the ad blockers.

• Firefox manages not to display images much (but not all) on the Web sites that I visit, certain images are displayed and some are not even if they are in the same format.

  I recently changed my ISP because I had connectivity problems. Especially my router would be closed sporadically. As part of my attempt to identify issues, I ran some spyware that I was told that I could trust. Since then, I have a problem looking at many websites as much (but not all) images are missing, even on websites that I know very well, including my own. What is odd, is that on one site each page has an image jpg under the navigation bar and all these jpg appear except for one who does not even appear when I reload images. This problem also makes security of sensitive sites as my amateur full site look Bank that scares me. The problem does not occur on other web browsers.

  What spyware software do you run?

  Make sure that allow you pages to choose their colors and you have not enabled high contrast in the Windows accessibility settings.

  • http://KB.mozillazine.org/Website_colors_are_wrong
  • http://KB.mozillazine.org/Websites_look_wrong
  • Check the permissions for the domain in the active tab in "tools > Page Info > Permissions.
  • Check that the images are enabled: Tools > Options > content: [X] loading images automatically
  • Check exceptions in "tools > Options > content: Load Images > Exceptions.
  • See the tab "tools > Page Info > media ' for blocked images (scroll all the images with the cursor key).

  If an image in the list is grayed out and there is a check mark in the box "block Images of..." and remove this mark to unlock the images from this area.

  There are also extensions (Tools > Modules > Extensions) and security software (firewall, antivirus) that can block images.

  • https://support.Mozilla.com/kb/troubleshooting+extensions+and+themes
  • http://KB.mozillazine.org/Images_or_animations_do_not_load

• My Apple Macbook late 2009 has been upgraded to 4 GB and Mountain Lion but runs very slowly. When I check the memory system activity monitor, I see that there are 1.6 GB inactive. Is this the cause of the slowness and what I can do?

  My Apple Macbook late 2009 has been upgraded to 4 GB and Mountain Lion but runs very slowly. When I check the memory system activity monitor, I see that there are 1.6 GB inactive. Is this the cause of the slowness and what I can do?

  Reinstall OS X from scratch and add more RAM.

  Ways to help make a slow Mac faster

  17 reasons why your Mac runs slower than expected

  Slow performance of Mac? This Article addresses!

  Difficulty of slow start in OS X | MacFixIt - CNET Reviews

  6 easy tips to speed up OS X Yosemite on your Mac.

  Avoid using third-party software that claims to clean your computer. This software does more harm than good. In addition, you don't need it. Note that all computers become slower over time even in the normal conditions of use. Generally, the experienced users erasing the hard drive and do a clean install from scratch at least once a year or every time that the installation of a major upgrade of the OS. Well sure doing so also means that you need to maintain regular and several backups.

  Add more RAM or reduce the number of simultaneously executed from applications and utilities. Remove unnecessary software such as anti-malware and that promises to clean your Mac. Look for the runaway process: Runaway applications can shorten the battery life, affect performance and increase the heat and fan acti... See also:

  Before Mavericks

  Open the activity monitor in the Utilities folder.  Select all processes in the drop process .  Click the % CPU column heading twice to display in descending order.  If find you a process that uses a large amount of time processor (> = 70,) then select the process, and then click the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  Mavericks and later versions

  Open the activity monitor in the Utilities folder.  Select all processes in the menu display .  Click the CPU tab in the toolbar. Click the % CPU column heading twice to display in descending order.  If you find a process that uses a large amount of CPU %, then select the process, then click on the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  Things you can do to solve the slow Downs

  If your computer seems to run slower, here are some things you can do:

  Start with tours: OS X maintenance - MacAttorney;

  The X Lab: the X-frequently asked questions.

  " Safe mac" Mac Performance Guide;

  " Safe mac" the myth of the dirty Mac;

  Maintenance fast Mac Help.

  Start in Safe Mode , and then repair your hard disk and permissions:

  Fix the hard disk and permissions before Lion

  Boot from your OS X install disk. After the installer loads, choose your language and click on the button continue. When the menu bar appears select utility drive in the Utilities menu. After that the charges of THE select your entry from hard drive (mfgr. ID and car size) in the list on the left.  In the status area, you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is faulty or has failed. (State SMART is not reported on external drives Firewire or USB). If the drive is "verified", then select your OS X volume in the list on the left (subentries under the entry for the road), click the first aid tab, then click the repair disk button. If THE reports any errors that have been corrected, and then run repair disk again until no errors are reported. If no errors are reported, click repair permissions. Wait until the operation is complete, then exit FROM and return to the installer.

  Repair the hard drive - Lion-Lion/mountain/Mavericks

  HD recovery start:

  Restart the computer and after the buzzer, press on and hold down the COMMAND and R until it appears the screen of Menu utilities. Otherwise, restart the computer and after the buzzer, press on and hold down the OPTION key until the Boot Manager screen. Select recovery HD disk icon and click on the button below.

  When the recovery menu appears, select disk utility. After that the charges of THE select your entry from hard drive (mfgr. ID and car size) in the list on the left.  In the status area, you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is faulty or has failed. (State SMART is not reported on external drives Firewire or USB). If the drive is "verified", then select your OS X volume in the list on the left (subentries under the entry for the road), click the first aid tab, then click the repair disk button. If THE reports any errors that have been corrected, and then run repair disk again until no errors are reported. If no error is not reported, then click repair permissions. Wait until the operation is complete, then exit FROM and return to the main menu. Select restart from the Apple menu.

  Restart your computer normally and see if it helped at all. Then do little maintenance:

  For disk utility can't handle situations, the best third party is Disk Warriorutility;  Fixed DW only for problems with the disk directory, but most disk problems are caused by the corruption of directory; Warrior drive 4.x is now compatible with Intel Mac.

  Note: Alsoft ships DW on a bootable DVD that will boot Mac running Snow Leopard or earlier. He cannot start Mac that came with Lion or later preinstalled, however, DW will work on these models.

  Suggestions for OS X maintenance

  OS X performs certain maintenance functions that are supposed to take place on a daily, weekly, or monthly period. Maintenance scripts that are run at the beginning AM only if the computer is turned on 24/7 (no sleep). If this isn't the case, then a great solution is to download and install a shareware like Macaroni, JAW PseudoAnacronor Anacron utility that will automate the maintenance regardless of whether activity if the computer is off or asleep.  Dependence on third-party utilities to run periodic maintenance scripts has been significantly reduced since Tiger.  These utilities have little or no functionality with Snow Leopard or later version, and must not be installed.

  OS X automatically defrags files smaller than 20 MB in size, so unless you have a disk full of very large files it little need to defragment the hard drive.

  Under no circumstances should you install operating MacPaw or ZeoBit software (CleanMyMac/CleanMyDrive or Mac Keeper, respectively.) You don't need special software to keep your computer.

  Useful links about malware Protection

  "If you have an immediate problem with ads popping up see the Mac without danger" Adware removal Guide and AdwareMedic.

  Open Safari, select Preferences from the Safari menu. Click the Extensions icon in the toolbar. Disable all Extensions. If it stops your problem, then re-enable one by one until the problem returns. Now remove this extension as it is the origin of the problem.

  The following comes from user stevejobsfan0123. I made minor changes to adapt to this presentation.

  Difficulty a few pop ups browser that supported Safari

  Common pop - ups include a message saying that the Government has taken over your computer and you pay release (often called "Moneypak"), or a false message saying that your computer has been infected and you need to call a number of tech support (sometimes claiming to be Apple) to get it to be resolved. First of all, understand that these pop-ups are not caused by a virus and that your computer has not been assigned. This "hack" is limited to your web browser. Also understand that these messages are scams, so don't pay not money, call number, or provide personal information. This article will give an overview of the solution to remove the pop-up window.

  Quit Safari

  Usually, these pop-ups will not go by clicking 'OK' or 'Cancel '. In addition, several menus in the menu bar may become disabled and show in grey, including the option to leave Safari. You'll probably force quit Safari. To do this, press command + option + ESC, select Safari, press on force quit.

  Relaunch Safari

  If you restart Safari, the page will reopen. To avoid this, hold the "Shift" key when opening Safari. This will prevent windows since the last time that Safari was running since the reopening.

  It will not work in all cases. The SHIFT key must be maintained at the right time, and in some cases, even if done correctly, the window is displayed again. In these circumstances, after force quit Safari, turn off Wi - Fi or disconnect Ethernet, depending on how you connect to the Internet. Then restart Safari normally. He'll try to reload the malicious Web page, but without a connection, it will not be able to. Leave this page by entering a different URL, i.e. www.apple.com and try to load it. Now you can reconnect to the Internet and the page that you entered is displayed rather than the malicious.

  An excellent link to read is Tom Reed Mac Guide of malicious programs.

  Also, visit the FAQ XLab and read of detection and avoid malicious software and spyware.

  Check out these articles from Apple:

  Mac OS X Snow Leopard and malware detection

  OS X Lion-Protect your Mac against malicious software

  OS X Lion mountain - protect your Mac against malicious software

  OS X Mavericks-Protect your Mac against malicious software

  On the quarantine of file under OS X

  If you need antivirus protection Thomas Reed recommends to use ClamXAV. (Thanks to Thomas Reed to this recommendation.)

  The user Joe Bailey comes this equally useful advice:

  The facts are:

  1. There is no anti-malware software can detect 100% of malware out there.

  2. There is no anti-malware that can detect all targeting the Mac.

  3. the best way to prevent breaches the most is for you as the user is aware that

  the most successful malware attacks rely on sophisticated social engineering

  techniques preying on human greed, * and fear.

  4 Internet pop-up windows telling the FBI, NSA, Microsoft, your ISP has detected malware on

  your computer is designed to trick you into installing their malware thinking it's a

  protection against malware.

  5. some of the anti-malware market products are worse than malware

  go where they are supposed to protect you.

  6. be careful where you go on the internet.

  7. don't download anything from sites, you know are safe.

  8 avoid links that you receive in email, always be wary, even if you get something

  you think a friend is, but that you did not expect.

  9. If there is any question in your mind, then assume that it is malware.

  Troubleshooting Applications

  I recommend that you download a utility such as TinkerTool System, OnyX, Mavericks Cache Cleaneror hiding a Cocktail that you can use to delete the former newspapers and archives, cleaning, etc. Corrupted cache, logs or temporary files can slow down the application or OS X crashes and panics of the kernel.

  If you have leopard snow or leopard, then for similar repairs install Applejackfreeware utility.  If you do not start in OS X, you can boot into single-user mode , where you can run Applejack to make a set of routines for repair and maintenance of the command line.  Note that it takes 1.5 AppleJack for Leopard. AppleJack 1.6 is compatible with Snow Leopard. Applejack does not work with Lion and later versions.

  Basic backup

  For some people, Time Machine will be more than enough. Time Machine is part of Mac OS X. There are two components:

  1. a panel of Time Machine preferences as part of the system of preferences;

  2. a request for Time Machine, located in the Applications folder. It's

  used to manage backups and restore backups. Time Machine

  requires a backup drive that is at least twice the capacity of the

  drive being backed up.

  You can also get an external drive at least equal to the size hard disk internal and make (and maintain) a bootable clone/backup. You can make a bootable clone using the disk utility's restore option. You can also create and maintain clones with good backup software. My personal recommendations are (the order is not significant):

  1 Carbon Copy clone

  2. get backup

  3 already seen

  4 superDuper!

  5. Synk Pro

  6. Tri-Backup

  Visit The FAQ XLab and read the FAQ on the backup and restore.  Also read How to back up and restore your files. For using Time Machine, visit FAQ Time Machine of Pondini for help with all this time Machine.

  Referenced software can be found at MacUpdate .

  Additional tips

  Make sure you have a sufficient amount of RAM installed for the number of applications you run simultaneously. Make sure to leave a minimum of 10% of the capacity of the hard disk as free space.

  Add more RAM. If your computer less than 2 GB of RAM and you use OS X Leopard or later, then you can do it with more RAM. Snow Leopard and Lion works much better with 4 GB of RAM that is their system. Most concurrent applications, that you tend to use the more RAM you should have.

  Always have at least 15 GB, or 10% of the capacity of your hard disk as free space, the largest. OS X frequently accesses your hard disk, so offering enough free space will keep things slow down.

  Check for applications that may be hogging the CPU:

  Before Mavericks

  Open the activity monitor in the Utilities folder.  Select all processes in the drop process .  Click the % CPU column heading twice to display in descending order.  If find you a process that uses a large amount of time processor (> = 70,) then select the process, and then click the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  Mavericks and later versions

  Open the activity monitor in the Utilities folder.  Select all processes in the menu display .  Click the CPU tab in the toolbar. Click the % CPU column heading twice to display in descending order.  If find you a process that uses a large amount of time processor (> = 70,) then select the process, and then click the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  This problem occurs often because of a corrupted cache or the preferences file or an attempt to write in a corrupted log file.