Monitor the disk usage

Similar Questions

• Is it possible to monitor the disk space on a system that is NOT a

  Is it possible to monitor the disk space on a system that is NOT a
  Hyperic customer on this subject? While I can set up an alert for a disk space. Or if a client is necessary?

  Oh yes, to see the section on parsing SNMP agent, go to page 21 of the guide "test ride" - http://www.hyperic.com/downloads/assets/review_guide.pdf

• Monitoring the memory usage on iOS using the Stats class

  I was check memory usage on an application I'm developing for iOS using Stats class https://github.com/mrdoob/Hi-ReS-Stats ( http://help.adobe.com/en_US/as3/mobile/WS4bebcd66a74275c3-315cd077124319488fd-7fff.html#WS 948100b6829bd5a61637f0a412623fd0543-8000).

  I added the class Stats to my project and redeployed and, Ouch, reported in Stats memory usage ramp upward (quite slowly) even when there is nothing going on in the application (just displaying a loaded bitmap).

  To try to find the question, I created a project with a test class that extends Sprite with just this single call in the constructor: -.

  addChild (New Stats());

  I have deployed to the device to check that he didn't swallow all of memory.

  But I was surprised to observe the use of the memory to crawl upward and upward (to 5) before kicking in some garbage and takes memory down. I left it running and then he slipped once again more than 7.5 this time before being deported back down to just below 3.

  So 2 questions that I would be grateful any feedback/comments/thoughts on related: -.

  1 is this normal (i.e. memory creeping up when there is nothing else than to the Stats in the project)?

  2 - What is the best way to monitor the memory usage in an application? Good enough stats - is Stats itself causing the memory usage?

  All the best guys!

  See also thread (http://forums.adobe.com/message/4280020#4280020)

  My conclusions are:-

  -If you run an application and let idle, use memory slips gradually upward (probably in memory is used to perform the Calc/refresh the display, etc.)

  -Periodic garbage collection occurs and memory is brought back down

  -This cycle could be more than 5 min.

  Work with your real application and memory will increase and be published much more quickly/regularly.

  -It's probably worth making an initial check running on your desktop computer to smooth out all the initial problems

• I want to monitor the disk space and CPU on a windows - DONT see machine

  I want to check the disk space and CPU on windows server 2003 box - DON'T see pltform for windows box all 'fileserver mount' or 'CPU '.  I do not see these services
  for my UNIX/LINUX platforms. What controls what in health platform services, and WHY doesn't show the windows platform the platform services. I have Server 3.02
  talk to the windows client running 3.02 box. I just reinstalled the client on windows
  box and still the same. Nothing in the health platformservices). I restart the HQ server and its
  client also. NOT knowing how to manage the windows box. I can go in manually and add an assembly file server service and name it and then this name appears in the services of the platform
  health. I shouldn't this for CPU, NetworkServer or mount fileserver interface. ???  I talked to John Mark Walker and is well why this is happening?

  I'm not an expert but I have encountered this problem also.  That's why I think it happened to me.

  1. I installed the server and checked it was running and I was able to connect to Headquarters.
  2. I installed my agent on another box and as soon as he said it started successfully killed him so that I could go ahead with the installation of the agent as a service.
  3. I installed the agent as a service and started it.
  4. this particular agent in central administration did not show one of the hard disks or WIN32.

  I fixed it by deleting the agent and put it back.  After you start the agent for the first time and it communicates with the server let it run for a while before you kill to install as a service.

  1. stop the service of the agent on the windows machine
  2. open your command line, change to your agents directory and run hq-agent you to uninstall as service
  3 remove the data of your agent directory folder
  4. use the download of SERVER installation to install your agent
  a. by running setup.bat - full (option 3 for the installation of the agent)
  5 finish the installation of the agent so that your window says 'agent started successfully.
  6. DO NOT CLOSE THIS WINDOW
  7. connect to your HQ and accept your inventory of auto-discovery, access this resource, and you should see that it is only partially completed
  8. Refresh every few minutes and you should see all the icons of availability to change green checks and your additional question as disks and CPU added.
  9. once filled close your agent, install it as a service, and then start it again.

  I was killing my initial discovery officer before he could finish, looks like you have the same symptoms.

• Monitor the memory usage

  We are testing EXSi 4 and p2v a virtual machine. Set us the vm to 2gig memory, but still seem to face the slowness and keyboard slows down etc. Have not been able to find a way monitor the memory because it shows the full 2gig, that I gave him. There is no balloning I see, so my question is how can you really know if you need to give it more memory or not, without going through certain types of plant monitoring?

  Any help will be useful,

  Thank you

  Rebecca

  I think we have some know how now.

  Thank you so much for all help.

  Killer

  Run you P2V for Windows? Is that what you did clean the devices already anyone after P2V? Installed VMTools? Also look at this http://communities.vmware.com/docs/DOC-5430

  StarWind Software R & D

  http://www.starwindsoftware.com

• withdraw the authorization allowing you to monitor the memory usage

  I now often have either force quit, restart and started having panic 'of the core"since I agree allow Firefox CPU usage monitor. I'm still on OS X 10.6.8 on my Mac. I got no problem with anything since installing this OS X.

  However, from time to time with the latest Firefox 7.0.1 installation I think the program or my computer 'blocks' and seems unresponsive. I left active Firefox and resident on my computer last night and once again, everything will be inadmissible. I opened the monitor activity and noticed that Firefox was consuming 283 MB of real memory (now 298,6 MB) and I have this one open another tab for the Seattle Times. I withdraw my permission to allow Firefox to watch my memory usage and need to know how to delete the cookie or what ever that governs)

  Go to Firefox > Preferences > advanced > general tab and uncheck the box "send performance data" more information here.

• chromebox: check the disk usage and the amount of available disk space

  How can I check the amounts free space on disk 16 GB and the amount used by different programs and files

  Thank you

  Stanley

  Hi @canninggm ,

  Thank you for visiting the Forums HP's Support and welcome. It's a great site for information and questions. I looked in your question about your Chromebook and wonder about the free space on your SD here a link to show you how to check.

  If it helps here is the link Central Chromebook help Forum. They would be better placed to answer your concerns about their products.

  Thank you.

• How to check the disk usage?

  Morning everyone!

  So we have a TIME of vROPS 6.0.1 installation in our environment. It was previously running very slowly due to being of smaller size that it should have been, so I upped the CPU, memory and disk space and now it works great.

  However, I would like to know the use of the disc to see if it has been the bottleneck. How do I by any user (admin or regular) interface interface or by remote access in the VAPP?

  Thank you!

  The built-in tab of health of the Self is an easy place to start, but you can also navigate to the device itself from within the UI, and check metric vROps as for any other virtual computer.

  

• How to monitor the use of the PXI UC?

  Does anyone know a way to control CPU utlization on a controller with LabVIEW PXI programmatically? I know that NEITHER had a VI owner to monitor the use of memory called rtgetmemorysummary.vi to monitor the memory usage, and I want to do the same for the CPU usage.

  If you mean a targer RT, then you can use

  RT get CPU loads.vi

  See here

  Marco

• Disk usage statistics are not available

  Trying to generate a report for Reporting and chargeback-> inventory on the HIGHER-UPS. But the disk usage statistics are not available

  Hi Eric,.

  Not sure why it's empty.  You can check with the support.

• My laptop is slow and uses up to 100 percent of the disk

  Hello. To start things, I want to confess that I am not the computer geek. I know how to handle a thing or two, but if you want to help, please describe each step to solve my problems one by one. I would like a clear and detailed explanation and thank you for spending the time trying to help me.

  Well, I use a X550L from ASUS. Purchased 3 months ago and used it quite often. It has a 4 GB RAM, OS of Windows 8, although I tried to install the free Windows 8.1 it never change. It also has a NVIDIA GEFORCE 720 m. All parts was original I've ever hardware upgrades. The last two days were a nightmare for me. I couldn't sleep thinking about the problem I have with this laptop. It's new, and this problem worries me because I'm looking at a laptop that I would use for another 3 years. If the question was:

  1. as if the title has not made clear enough, my laptop runs very slowly. Let me describe how SLOW is. I start up my laptop and open my utorrent then I'll check my disk usage in the Task Manager, it shows 100%. Don't tell me Defrag, adjust my virtual memory, disable superfetch and microsoft service because I did all this and nothing changes. Well actually it changed for some time, but whenever I open utorrent as soon as I turn on my laptop, the disk usage percentage increased up to 100%. Also sometimes it drops as all methods suggest he would.

  2. my second question is that because of my laptop uses all available RAM, I can't open any files or applications or even Chrome without having to lose 5-20 seconds of my life waiting. Sometimes even more which is very frustrating for a daily user like me. Believe me I never open too many files to work in one, but it happens as if I did.

  I can sound crazy, but I'm not. I'm just frustrated by this I'm having problems. I'm not rich guy immediately buy new laptop. I'm very sentimental. I want to solve this problem and to let go of this problem that seems awkward to me. Please help guys.

  Thank you.

  Beyond the tip diagonstics, here are some simple things you can do: http://cmdrkeene.com/fix-sluggish-slow-pc

• my windows 8 pro responds with indicated 100% disk usage in the Task Manager

  my PC pro 8 windows stops responding and when I check in Manager tasks, it indicates 100% disk usage while the CPU is not used and not even alone is open. I don't know what the problem with my system since this problem started recently. I use windows 8 months that it released until yesterday, I had no problem. I can restore pc to the normal operating mode after several forced off using the power button. This especially happens first start to the top of the day while all day if I'm constantly using pc I don't encounter any problem, but if I put it to sleep and again once I wake up get similar problem. I am really worried please help me solve this problem. When I checked in the Task Manager it is the system that is causing the issue

  It's my system config

  Win 8 pro 64-bit

  AMD fx cpu 4100

  4 GB of ram

  Thank you

  Help, please

  Hello

  Just disable superfetch service...

• Aspire S3 paging file using 100% usage of the disk after upgrade to windows 10

  After about two weeks of burn-fast Windows 10, he started hanging. The mouse would start stuttering, the keyboard would be out after a minute, and my entire system has been very slow. In the Task Manager, the use of the disc on my C:\ drive 100%, and in resource manager, C:\pagefile.sys was at the head of the disk (e/s).

  Start on the security mode is fast, and it hangs there. I tried the system restore, but all my restore points give the error message "Windows cannot retrieve the from the point of restoration." The error code is 0 x 80070017 for each of them. What should I do?

  I solved this problem by exchanging on my aging with a new ssd hdd.

• (Redirected) Computer beeps during use. Maybe high disk or the use of the CPU usage?

  New here and new to Dell computers. 1st stop, I have a Dell XPS 13 "i7 6560u 16 GB and SSD 512. When using the computer, I get a series of 2 beeps. It seems to be related to the high use of the disc or the CPU usage. I guess my question is possible to put these notifications for a longer delay or at least decrease the volume of the beeps. I am aware that when I use one of my CSD programs to open a browser and looking for an answer to the question about what there will be times where I could get high uses a of these, that's all just annoying and not really want to turn them off entirely (option I would) I would delay having more time this will happen to until I get through this ,

  I thank you,

  Ben

  Hi w4qed,

  Please repost this in the laptop computer forum help.

  http://en.community.Dell.com/support-forums/laptop/f/3518

• The CPU usage reaches 100% and the system locks requiring a hard restart on Windows Vista

  All of sudden the CPU usage reaches 100%, which makes the system dead slow and finally the system stops responding. I have to do a hard reboot to continue using the system.

  I tried to open the Task Manager to see if there are programs or services running that can consume resources and found nothing. The remains of number of CPU use, the graph to use but less than 10 years is hovering at 100%.

  I did not change my system.

  The problem appears on the two accounts that I installed on my operating system.

  I removed all the unwanted programs since the system was started.

  I have McAfee Antivirus installed for more than a year now, and the latest antivirus patches have been installed.

  Help, please.

  Thank you in advance!

  Hello

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  Hope these helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.