application error. CFC with datasource

Similar Questions

• Error: dwwin.exe - Application error when executing Fallout2.

  Original title: dwwin.exe - Application error

  Hello
  I get this error when you run Fallout2 on my computer (Win XP SP3)

  dwwin.exe - Application error
  X with the exception of the breakpoint
  A breakpoint has been reached.
  (0 x 80000003) occurred in the location of the 0x7c90120e application.
  Click OK to terminate the program
  Click on Cancel to debug the program.

  When I press Cancel to debug the program, it crashes and I have to ctrl + alt + delete to get the Task Manager to end the process to ensure rear control.

  Any advice on what the problem is & how should I solve this problem?

  Thank you

  Hello

  1. what version of Adobe are you running?

  2. when there is this starting happening?

  3. did you other software on the system changes?

  This error can occur if virtual memory is too high.

  You can check the virtual memory settings.

  Set it to 1 on 1 time and a half the size of RAM installed.

  For more information, you can consult the following article:

  How to set performance options in Windows XP

  Did you installed Dell Quickset?

  If installed, then update the same thing and check.

• Help! When HP system windows7, including the QuickWeb button on the screen of the go blue screen with the option - BIOS application error (501).

  Help! When HP system windows7, including the QuickWeb button on the screen of the go blue screen with the option - BIOS application error (501).

  Help! When HP system windows7, including the QuickWeb button on the screen of the go blue screen with the option - BIOS application error (501).

  The error you mentioned does not match the description of the usual Windows blue screen errors. When I put this error for a web-search, it has proved to be a common problem with some HP computers. I was able to get my hands on the following link for a thread in HP communities that contains information about this error. Have a read of the content in this link and see if this applies to your situation:

  http://h30499.www3.HP.com/T5/notebook-HP-ProBook-EliteBook/HP-6730b-quot-BIOS-application-error-501-quot/TD-p/1075640

  Windows errors blue screen looks something like this. If you receive these errors, let us know about it as well as the complete info you see on the screen. And the error you mentioned in your initial post, I guess that the HP support forums would be a better place to discuss. Here is the link to the HP support forums:

  http://h30434.www3.HP.com/

• receive the error message with every new open tab

  Whenever I open a new tab, I get a popup error message. I have screen shots that can be granted.

  At first, I thought it was a mistake to Java, but I've uninstalled and reinstalled Java.

  There are two error messages which read:

  [JavaScript application]
  evalInSandbox:Error: Permission denied for <https://facebook.com> create a wrapper for the object of class UnnamedClass.

  [JavaScript application]
  Error: Permission denied for <https://facebook.com> create a wrapper for the object of class UnnamedClass

  So I clicked on help > troubleshooting information and choose Reset Firefox.
  Now I get a new error message with every new tab open.

  [JavaScript application]
  Error: syntax error

  Please tell us how to do this.
  Thank you
  JudyLeeThurber

  1. In the address bar, type Subject: config and press enter. The subject: config "this might void your warranty!" warning page may appear.
  2. Click on I'll be careful, I promise!, to continue on the subject: config page.
  3. Type browser.newtab.url
  4. Double click on the first result, a new window should now display.
  5. Type of topic: newtab in the area.
  6. Click ok and load a new tab. It now works of mireille?

• AccelerometerSt.exe - Application error

  AccelerometerSt.exe - Application error

  "The application was unable to start correctly (0xc000007b). Click OK to close the application. »

  It happened after trying to install the windows 8.1 update and my computer went to a black screen. It is in this State for a while and I had to go so I stopped it. The next time that I turned it on, the update had already completed and I had windows 8.1. Everything works well except for the error message that appears whenever I turn on my laptop. I have no idea of what he does, but when he arrives, it annoys the hell out of me. If anyone can help I would really appreciate it.

  In the menu is uninstall programs, 3D driveguard program it listed?

  If so you can try to uninstall it, restart, and then reinstall the program.

  The problem is definitely with this driver because what is the accelerometer is to have the program 3D driveguard Park the heads of the hard drive in case of bumping or dropping the laptop low rise.

  Unfortunately, I only got the drivegard 3D or ProtectSmart driver install and work, so I don't know what you need to do to clear this error, since reinstalling the driver did not work.

• Satellite 2430-402: 437 Application error during recovery

  Right, I've got a Toshiba Satellite 2430-402 (purchased new) for at least 3 years. I have formated several times before and re-loaded windows back on with no problems until now.

  The problem only started two days ago, when I noticed my CD drive was not recognized. So I decided to format etc, came out the disk Recovery Utility that came only with the computer to install everything, and it will not go beyond 12%. I'm greeted by * Application error 437
  Can not read the file.

  I left really stuck and cannot load anything. I fdisc / formatted /spinrite / kill the hard disk, just in case where there is something nasty on here and can still get nowhere. This is the first time I'm really stuck.

  This could be the engraver of CD or would it be the hard drive or basically the computer is nakered. I inspected the recovery disk, and they are all clean!

  Or is it because I made an update of the bios (you mind, it was weeks ago)

  Everyone please

  Thanks in advance

  Hello

  to my knowledge, the Ghost image files are placed on the Toshiba Recovery CD.
  That's why I studied on the ghosts manufacturing Web site.
  It s Symantec and found this information site:

  HM http://Service1.Symantec.com/support/Ghost.nsf/0/14579a4173691f8988256abf005f4f8f?OpenDocument&SEG= & lg = fr & ct = us

  According to this page this problem seems to be due to starting the computer incorrectly when you use Ghost with GoBack on the computer.
  This problem may also occur when you use a brand or type of CD that works well with your CD - R or CD - RW device. In this case, Windows or DOS might be able to read the information on the CD that other applications cannot.

• IEHelper Acrobat: iexplore.exe - Application error

  Whenever I get close internet explore I get the message "Acrobat IEHelper: iexplore.exe - Application error the instruction at"0x01801ea8"referenced memory at"0x01801ea8".»

  The memory could not be 'read' "what should I do?

  Which version of Acrobat reader you have installed?
  Try to remove this application, clean the registry (with CCleaner), download and install the latest version of Acrobat reader!

  All that s

• application error Userinit.exe & rundll32

  I don't know if anyone has any help on this would be greatly appreciated.

  I am Windows Windows XP Home SP2 on a Satellite edition.
  I think I have a virus that prevents me to connect to my computer properly. Whenever I connect to my computer, it shows the desktop, but nothing else. He then says "userinit.exe application error 0xc00000005 application failed to initialize properly."

  I have to use the Task Manager to find the office. I then give me rundll32 errors with the same error as stated above code. The rundll32 error prevents me from doing anything administrative, so I can not turn off the system restore, I could save a copy of the virus.

  I ran superantispyware and it seems to keep finding the same virus without getting rid of them.
  I really want to do a repair install, I can't find my cd.

  In my opinion these two files are not affected by viruses.
  Maybe your superAntiSpyware it cannot recognize as common system files.

  To ensure that your system is not affected by a virus, you should try to use multiple VRU and spy ware applications;
  I use the software called Antivir. The standard version can be downloaded for free from various Web sites. I recommend also using an Ad-aware and spy boot Search and Destroy. All these tools prevent system of Trojan and Virus attacks. You should use it too.

• HP Envy 7 ": HP laptop"logonui.exe application error"+ auto repair restarts without end

  I really don't know exactly what is the name of my product, however, my problem is very specific:

  First I got an error message titled something in the sense of "logonui.exe application error" with a background black, I couldn't start my laptop up so I went to recovery and just all backed up successfully and went to reformat but it got stuck at 2% until he finally said the Recovery Manager has stopped working , I tried just about everything until finally my laptop just say 'auto repair start' goes to a blue screen, restarts and repeats again and again. I can't really do anything, it seems pretty well doomed. It seems like a virus, but really, I don't know what I can do, if the only solution is to send in for repair, can I try now?

  Kind regards

  Josh

  I get the "HP Recovery Manager failed. Error code = 0xEFFFFF08"pop up whenever I try to get back and I'm not using any USB devices.

  I ran a scan of the hard disk on UEFI and my results have been:

  Smart Check: spent

  DST short: failure

  Failure ID: QCQ7PH-7RK701-XD7WMF-60VL03

  Product ID: N1L03EA #ABV

  Hey!

  "The 'LogonUI' in Windows application manages your startup and shutdown graphical user interface (GUI) that displays the Windows on your screen logo and the status of your judgment." It also displays the login screen that you see when you start the PC. Corruption in this application could lead to problems start and stop, such as gel. »

  I found this paragraph from a titled link: LogonUI.Exe Application error after update 8.1 of Windows that can help you! There are a few in there troubleshooting steps that may help.

  Here is a Microsoft document for you to read as well. This is called: error: LogonUI.exe application error.

  I understand what you are saying about this marking as resolved. Tell you what, read the links I provided on the error in the application (which, from what I've read, in my opinion, does not sound like a virus), replace the hard drive and then if the issues are resolved for you, come back and mark this question as an acceptable Solution for others.

  I wish you the best!

• Why keep java application error called "on HidePage" script whenever I run, browse and close Firefox?

  Why keep having java script application error (on called HidePage) whenever I run, browse and close Firefox?

  URL of affected sites

  http://

  User Agent

  Mozilla/5.0 (Windows; U; Windows NT 6.1; Chrome/5.0.375.99 en-US) AppleWebKit/533.4 (KHTML, like Gecko) Safari/533.4

  Hello Bo.

  It is possible that you have a problem with some Add on Firefox which is an obstacle to the normal behavior of your Firefox. Have you tried to disable all add-ons (just to see) to see if Firefox goes back to normal?

  Whenever you have a problem with Firefox, whatever it is, you must make sure that it is not caused by one (or more) of your installed modules, whether an extension, a theme or a plugin. To do this easily and cleanly, start Firefox in safe mode (remember to select disable all add-ons when you start safe mode). If the problem goes away, you know that it's an add-on. Disable them all in normal mode and allow them one by one until you find the source of the problem. See this article for more information on troubleshooting extensions and theme and this one for plugins.

  If you need help with one of your modules, you will need to contact the author.

• Application error

  Hi, I've had Skype for almost a year now, and nothing serious had happened since then. Now, lately, I have acquired Skype application error saying

  "The instruction at 0x7263206f referenced memory at 0x7263206f. The memory could not write. »

  ↑ This appears soon after I started my Skype, I tried to update my Skype, reinstall my Flash Atobe and updated my Windows 7 Ultimate with 'Windows Update'.

  When I try to ignore the "Skype.exe - Application error" and just drag it off my screen, shortly after that Skype is not responding, and then click stop.

  Please help ~ ~: I

  I did and the error in the Application has ceased to appear!

  Thank you very much! ~

• Restore7.exe application error

  So, when I try to boot my windows, an error box will appear, who says:

  "Restore7.exe - Application error. The instruction at 0 x 77892591 referenced memory at 0 x 00008084. The memory could not be read. »

  When you click OK, the computer starts and get stuck on this same page. I can't go to HP recovery by pressing F11. Recovery CD no longer works. Operating system is Windows Vista Home Premium

  can someone help me please. This problem can be solved by buying new hard drive?

  There is the info from my computer. :

  http://support.HP.com/us-en/document/c01409678

  How are recovery disks does not work? If you insert the first disc into the optical drive, press any key shortly after turing on your computer, you should start the recovery menu so that you can fully recover your computer.

  In addition, this could have something to do with Windows Product Activation? If you have added the internal devices, remove them and make sure you unplug all USB devices. Just the mouse, keyboard and display connected when you attmpt to a recovery.

• Qosmio F20 - 437 Application error

  Hello

  I use the recovery disk to restore my Qosmio F20 to factory settings, an application error 437 a popoed upward during the reimageing process.
  I remember upgrading the RAM, and I don't have the original with me.

  Any help will be appreciated.
  Thank you.

  Hello

  Autour Googling, I found thisarticle.

  So I ask what may be the solution to your problem. May be corrupt drive recovery? Can you see scratches or stains on it?

• Error 0xBFF62133 with NI-CAN on NOR-XNET

  My C application was written with the NI-CAN Channel API and works very well on the old cards PCI - CAN. Now he runs on a PCI-8512 OR XNET 1.3.0 with the NI-CAN 2.7.2 compatibility library and falsely, it gives this error: "NI-CAN: (Hex 0xBFF62133) you set an attribute that is not supported when Virtual Bus Timing is off." Refer to the section of frame channel Conversion of the NI-CAN manual for a list of the attributes that return an error when Virtual Bus Timing is false. Solutions: 1) Set Virtual Bus Timing true (or leave as default). "(2)"do not set the attribute not supported."

  My application does not frame channel Conversion or the virtual Bus to use directly, it turns to speak directly on the bus hardware CAN0 via the channel API. Use the compatibility library the virtual Bus?

  How can I avoid this error?

  Thank you.

  So the actual error you see is 0xBFF63133, not 0xBFF62133 (starting with 0xBFF63 - error codes are errors OR XNET). This is due to a bug in the way the database is imported (several threads all try to create a cluster with the same name, where the error "name of the cluster in double").

  While the bug will be fixed in the future, in the meantime, you need to make calls to sequential nctInitStart. I recommend a small function that catches a global mutex and then calls nctInitStart. Sorry for the inconvenience.

• HP Pavilion Notebook: AccelerometerST.exe Application error on my NEW computer laptop

  When I started this morning, I got this error-

  AccelerometerST.exe (0xc000007b) application error - could not start properly. Click OK to close the application.

  I see all the other posts about this error, but they were all of those who have updated from a previous version of Windows.  It is a new machine that came with 10 Windows installed.  I used it for a few months, and this is the first time I had this error.  I made two changes yesterday to the system.  I installed software from Intuit Quicken 2016 (the American version), and as a requirement of this program, I had to change the language of non-unicode in American English.

  Other than that, everything's the same.

  Help, please!

  Hello

  I'm surprised that you have received the 'replace' option as the version of HP 3D DriveGuard in my link is a somewhat older version and are generally provided with Windows 10 - cancel the installation file, restart the computer, and then try the version at the link below.

  http://ftp.HP.com/pub/SoftPaq/sp71501-72000/sp71811.exe

  If you get the same error, after return with the full model number and your cell phone Nr-, you can usually get this by holding down the fn key and pressing ESC, or see here for a guide to the location of such information.

  Kind regards

  DP - K