Monitor turns off after a few seconds on Satellite A50

Similar Questions

• HP zr2740w turns off after a few seconds

  I had a HP zr2740w for 5 months now works fine. But then I had a disc crasch and had to reinstall everything.

  The monitor is correctly copied to windows and the resolution 2560 x 1440 (recommended). Everything works very well for a few seconds then it stops. (no light in the led). If I click the power button on front it sources fixed blue lights and work for a few more seconds before that the led turns off (not orange).

  I installed all the latest drivers.

  graphics Nvidia GeForce GTX 560Ti 4 GB card.  Driver 9.18.13.697 (October 2, 2012)

  Monitor HP ZR2740w IPS Driver 1.0.0.0 (March 23, 2011)

  So the problem is not related to the cable (use the green to dual link dvi cable).

  I am running windows 7 ultimate 64-bit.

  Credits to HP support. They came and replaced the monitor within 24 hours. Now everything works perfectly.

• LCD screen turns off after a few minutes

  My screen turns off after a few minutes, even if the parameters to be able to say that he should turn off after 60 minutes of no activity.  Before this date should activate the screensaver after 10 minutes of no activity.  But in my case the active screensaver ever and my right monitor fades to black.  What can I do to fix this?  Is there a registry setting that has changed I don't know?

  -penciline

  I checked power options, the first thing, and then I checked the (NVIDIA) graphics card Control Panel to see if there is a setting for it.  The figures that I had in my previous post came from my power options, but I don't know how standard power who do not have the numbers that it would affect the schedule/performance options.  I went to advanced settings.  But I also rebooted my computer which solved the problem, in my opinion.  I'll have to sit and wait to be sure, but I'll get back to you on that once I have test.

  -penciline

• Satellite A60-712 - turn off after 2-3 seconds

  Hello everyone.

  I am trying to fix this Satellite A60-712; He came to me without feeder, but I found a compatible and it seems to work: CC in LED lights up and the battery starts to charge.

  My problem is that this starts Mobile for awhile, radiator begins to turn, all the lights are normally, but, all of a sudden everything turns off after 2-3 seconds. I have observed that this machine has only one slot of free RAM and noted that it has integrated the module memory motherboard; that would be the problem? Or another reason?

  Could someone help me?
  Thank you.

  Hello

  > it came to me without feeder, but I found a compatible
  Can you please test it with a Toshiba original AC/DC adapter? The same thing is happening?

  If the laptop has already integrated memory motherboard there is no problem. Alternatively, you can use the laptop without additional RAM module.

  In the worst cases, you need professional help of an authorized service provider. :(

• Satellite A30 turns off after a few minutes (set temp)

  Anyone know if there is a temp for the A30 laptop parameter. My laptop turns off after a few minutes or alternative suggestions

  Thank you

  Hi Waseem,

  Dust accumulation is not in the fans themselves, but in the space between the fans and the CPU radiator, where it is trapped by the matrix of cooling.

  The technique of using a hose of vacuum cleaner against the fan grids is designed to suck the dust outside in front of the fans without having to dismantle the radiator.

  Obviously, you have just as much suction as possible in order to remove any dust, it is therefore important to isolate grids of aspiration air with a cloth.

  Kind regards

• AL1716 screen turns black after a few seconds. If I turn the monitor power off & on again, it works - 2s

  The monitor worked fine for a few years, so is no longer under warranty. I was about to throw.

  Then the monitor I bought to replace, was damaged on the way to the group practice site.

  Now, I hope to fix the Acer monitor.

  When the computer starts, and a new screen loads, the monitor it shows for a few seconds. Once the computer on the desktop, if I turn off the monitor and turn it back on, it displays the desktop perfectly for a few seconds.

  The monitor I replaced it with also works very well with the computer. He collided with another device, when the car in front of me stops suddenly and there is a piece missing from the screen in the lower left corner. It looks like modern art in the lower part with some of them white and black and a few vertical lines and horizontal lines. I can continue to use it, since what I need lies in the upper part of the screen. I learned the keyboard command to shut down the computer. The windows key, followed by the right arrow, followed by the Enter key.

  I watched a few videos for repair of monitor on Youtube.

  It seems that the capacitors are the typical element which spoils first.

  So I guess I'll break the front off the monitor and see if the card has the capacitors top of the pop up. I can use capacitors with the same intensity of micro-Farouk and the voltage equal or better than the other monitor.

  I've recently learned step secret beginning of successful welding.

  You must have a clean tip.

  When you clean the tip of the soldering iron, it should have the appearance of copper. If weld does not stick to the point, it is not clean enough. I used a wet sandpaper dry and scoured it. They are sold with a protective coating that must be removed. If it is not removed it clogging the tip.

• Screen of HP Pavilion 15 turn off for a few seconds when I turn on or off charger

  Hello

  I bought new 15 hp Pavilion. I noticed several times when I turn on or turn off my charger, screen off for a few seconds and then after a few second screen turned on. Please help me its furstating me.

  > It is customary, and in this case necessary to provide you with the exact model of Notebook, you have a problem - with. [There are MANY variants of models of HP Pavilion 15 - T, for example.]

  > You should always be sure you have installed/applied all updates for all the hardware devices on your laptop, and all THE updates of Windows marked '' Important '' and all updated Windows "optional"-section for any hardware device in your laptop including service updates Windows detects (and offers an update). "."

  > For example, this link: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4158&lc=en&cc=us&dlc=en&sw_lang=&product=678785 has the latest HP drivers and patches for a specific variant of the Pavilion 15-T.

  > AFTER you are certain that you have all the latest drivers and patches on the spot, you can try the 'old trick' as follows: stop Windows; When your laptop is turned off completely (after complete closure), THEN remove the connector of the AC adapter / CC and remove the battery.

  > Hold DOWN the button of power without interruption for a full 60 seconds. Then replace your battery in your laptop. Do not connect your power adapter. Turn on the computer laptop and logon in Windows. Check the settings of control Panel\Power Options and know the level of your battery Charge. If it is less than 25%, then (and only then) plug in your adapter and connect it to your laptop... and leave the charge the battery up to "completely" to the level of 98 to 100%. * Note: If your card has a removable cord AC connector, make sure that the connection is "tight". If you still think that your adapter is defective, GET a NEW one! Damage a laptop for $400 - $800 is NOT worth it, compared to the cost of a new adapter.

  > Use the built-in help of your laptop on how to DISABLE (!) "Hibernation" and eliminate this CAUSING trouble 'feature' in Windows PC. When you did, always restart Windows, to be sure, the changes are applied. Many changes and take 'Entirely' product updates only "for" stop or "during" startup of Windows PCs. [while Windows O.S. 'turns', most of its system files is LOCKED].

  > FYI: let always your battery run down to him below highlights you plug in your sector/charger adapter. Charge a rechargeable battery 'medio-load-levels' causes shorter battery life...

• The display turns off after a few minutes and shows 'No Signal'

  Hey guys, I was faced with a weird problem recently. My desktop monitor turns off by itself after a few minutes, but the works of CPU, I can hear the fan running and see the lights blink. One thing I noticed, is that when the screen turns off, the light Orange on the processor rest on which flashes normally just. My PC works normally on the mode without failure, but worse, safe mode, but I can't work on my software CorelDRAW. This may be the problem of SMPS? because recently, my entries of mouse and keyboard did not work due to which I got a USB keyboard and a mouse. I recently installed Windows 7 64 bit, but I think that shouldn't cause the problem since I have worked with Windows 64-bit before on the same machine.

  PC configuration-

  Intel Core 2 Duo 4500 @ 2.20 Ghz processor
  ASUS P5QPL-AM motherboard
  3 GB RAM
  No (not sure, maybe integrated) graphics card
  1 TB harddrive

  PS - I couldn't find an exact category for my problem.

  Hey Archer
  Currently, I formatted my Windows 7 and installed Windows 8 and am these problems persist. I have not upgraded but formatted my C drive and installed a fresh new copy of windows 8... so I thnk it may be a problem of the SMP. Can he?

  Hi sunny

  It can or mentioned being SMPS... the reason is... you have already said that the computer or the monitor works fine in safe mode! But since his past even when you install Windows 8,
  To make troubleshooting a
  1. go to the Bios and reset all default by selecting the optimum setting in the bios... Given that your motherboard has got characteristic overclocking and selection of the IGD... let him get by default...  Start the computer and check if the monitor turns off always.
  2. If step 1 does not solve your problem... then go to the power option in the control panel and select your power setting of the high-performance system where you can set your monitor to never go to sleep.  See what's happening... If the monitor still going to sleep even after this setting... then you have a problem with drivers or the motherboard... try updating the drivers and see if that helps.
  3. If the update of drivers did not help... so the next option is to review your material... try to get a replacement screen and see if this could solve this problem... A things you can deduct that if this also fails, then the obvious reason is that your monitor is ok... and problem must be the motherboard.
  4. Firstly check the display port... does it feel loose?
  a. do you have this port pins come out?
  b. your motherboard has two power connections (EATXPWR 24-pin and a 4-pin ATX 12V... are both connected?
  c. your SMP should be at least 400W according to recommendations from the manufacturer to you. Check this box...
  d. then ofcourcse obviously... Reinstall the Rams and other external devices.
  Follow these steps and let me know your comments for each

• Tecra 9100 comes on intermittently and turns off after 10-15 seconds

  Referring to a Toshiba Tecra 9100, model No.: PT910E-602SF-FR

  The power button normally doesn't light up at all, even if sometimes it starts normally, starts to load windows, then always turns off after 5 to 15 seconds in any case.

  It always requires the batteries very well, but it won t turn on. I ve checked the ram, hard drive and I re - set the default bios - nothing prevents to cut if you can get it to turn on.

  Any ideas what could be the problem? Any help appreciated, it s the second time I had - the same problem the last time!

  Thank you

  Hey,.

  Have you already tried to clean the fan? Maybe a lot of dust blocking the fan for laptop can start t, and then turns off itself due to a higher temperature. It would be interesting to try to clean it.

  But in my opinion, you've done everything you can do, and it looks like a malfunction of the motherboard. If cleaning using fan doesn t I think the motherboard is faulty or something else. If you are familiar with the disassembly of the laptop, you can try to fix it yourself with second hand parts. Otherwise it s time for a new laptop I think

• HP Pavilion HPE h9 - 1120-t Phoenix - PC suddenly starts turning Off after a few Minutes of use

  Posted this on the Forum for questions of another office before I reduced the problem.  No one answered:

  http://h30434.www3.HP.com/T5/other-desktop-PC-questions/HP-Pavilion-HPE-H9-1120t-Phoenix-PC-suddenly...

  Announcing this computer from July 2012 and not even a hiccup.  4 days, the computer suddenly began turn power off. It doesn't stop, it turns off, the plug was pulled. When I reboot I get the message of abnormal termination of Windows.   There is no warning at all.  No message as the computer is overheating.  He comes to occur when the computer is idle without programs will open.

  When it stops, the power supply unit light goes out for a minute then comes back on the 'green' and the computer can be restarted.

  I unplugged the power cord and relugged and it seems fine.

  The computer is aware of the updates of Windows and can be stopped normally.

  I removed the cover and clean the dust and confirmed all fans are running properly.  I left the lid off the coast, and the computer stops again.

  I must add that when the computer is started 'cold' it runs about 15 minutes.  If you restart after it just closed, you have maybe 3-5 minutes of use.

  Why did you think it was overheating.

  Any ideas?  Thank you.

  Specifications of the computer:

  What thermal paste on the processor?

  There are two programs, you could download to monitor the temperature of the CPU

  Speccy free:

  http://www.Piriform.com/Speccy

  or Core Temp

  http://www.alcpu.com/CoreTemp/

  Another possibility is a PSU fault

  http://ryansccs.HubPages.com/hub/how-to-tell-when-computer-power-supply-is-failing

• Monitor turns off after 5 minutes & password protect when he wakes up. View properties - > screen saver "Wait: __minutes" and "on RESUME, Password Protect" checkboxes are grayed out.

  Help, please!

  I'm on a processor to work, so I've limited the administrative rights on the computer. My work function requires that I propose on the desktop to help others with professional assignments.

  THE PROBLEM: After 5 minutes of inactivity mouse/keyboard of the monitor off on the processor to work, she does not even go to a screensaver first, the screen turns off just in standby mode. When the mouse is moved or a key is struck, the screen lights up with a name/password user. I am developing carpal tunnel / repetitive stress syndrome having to retype my username and password so darn times per day, at the expense of some administrative setting of BOGUS Microsoft Windows... SHEESH!

  When I click on Start-> settings-> Control Panel-> display-> Display Properties-> screen saver , the "Wait: __minutes" and "On resume, password protect" checkboxes are GRISEES OUT [you can't edit these settings] . In addition, the default screen saver is set to void and no matter how many times I change it to something else and click 'Apply' return empty by default.

  TWO SERIOUS CONCERNS:

  Un When I'm away from my desk for more than 5 minutes, if someone arrives at my office, looking for me, it seems that my machine is completely off, so that co-workers can get the impression that I am out of the office when I could very well be just down the Hall.

  Two The Office I'm implemented in a motion sensor energy saving lights in the office, if the lighting turns off automatically too, so if I'm missing in the server room or help someone at their work station for an extended period of time, if someone comes to my office, looking for me, my machine seems to be completely off AND turned off the lights in my room , so it's as if I has not yet come to the office that day there! GRR...

  MICROSOFT, HELP US TO FIND a WORKAROUND: Help us make our work computers appear as they are wake / turned on while we are working work - especially when we ARE at work, just not physically sit behind our office temporarily work! GOOD GRIEF...

  Help us not to disturb our admins with specialized personal requests like these, they already have enough on their plate, ensuring that the network is in place and functioning.

  -JUDGES on Temp. Job Day @ assignment
  (Chained to a machine working at the expense of some fake Microsoft Windows administrator rights)

  PS. I have a screenshot of my locked dialog box display-> screen saver properties if you need more information. I wish I could download it right on this post to make things clear.

  PPS. Isn't it above described situation in the heart of the reason why employers more these days this demand we have iPhones, BlackBerry and SmartPhones? Because doctors and human beings humans with a bit of common sense finally realized that we must be sure that we move around during the day, at least several times per day, not only the stationary to our office location - watch a screen - ensuring that move us the mouse every five minutes so that our machine is not hibernate and look like it is not to do anything?

  PPP. If Microsoft can not help me with a work around for this issue because this issue is, 'something that I take with my 'network administrator',' kiss my _______! Everyone must be wrong because of the stupid administrative _ like this and if yes - I NEED TO KNOW - maybe I was just not cut for a job on time full computer.

  PEACE

  Hello JDG_SF, welcome.

  These options are very likely controlled by your GP (Group Policy) settings on your domain. Due to the nature of the work of rights how administrative, there is no way to work around this problem, unless you have access to change group policy settings that affect all the machines on your network.

  You would need to access or to change the settings of GP or find someone who already has access.

  For more information or get in-depth help, I would recommend pass this question to TechNet:
  http://social.technet.Microsoft.com/forums/en/categories/

  Thank you! Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Satellite A100 - monitor turns off after reboot

  Not here a load of HARD drive, also if the output of the BIOS not are displays logo. Just how to work again with turn off phone then turn on again. I also try external VGA display with cable (VGA VGA) have same problem.

  I try to put the connector again still.

  Toshiba Satellite A100 (model PSAA8) chipset Intel

  Hey mate,

  If you have the same problem on an external monitor I think that it s related to the motherboard or something else. He should t be a problem of the internal screen I think

  It's really hard to say something about it, but you can try to update the display driver and BIOS. The two you can find on the Toshiba site.
  Check it!

  In addition, it would be interesting to know what operating system you are using. Operating system preinstalled Toshiba?

• Tecra T9100 turns off after a few hours!

  Hi, I was wondering if anyone know why my Toshiba T9100 turns off? It is turned on and after about 3-4 hours, it is still, just turns off, the battery is full?

  I have two of them, and they both make the same thing!

  Thanks :)

  Hello

  Maybe overheating. Try to check the ventilation openings and clean the unit.

• monitor turns on only a few seconds-told not dvi no signal

  tried to reset to factory settings, but monitor stays on a few seconds again, and then goes black

  In addition, check the setting 'Disable the display' in your profile of active power.
  http://Windows.Microsoft.com/en-us/Windows-Vista/power-plans-frequently-asked-questions

• New Sansa Clip + turns off after a few minutes of play audiobook...

  Hello

  I was wondering if someone could help me.  Have been enjoying my new Sansa Clip + for the past two weeks.  Just been using the function of radio - finally understood how to load an audio cd on the drive.  The drive is recognized on my computer, and audio tracks are in the player very well.  When I start the audio book, the player will stop after about three minutes of play.  I need to do a soft reset before it turns on again.  This happens whenever I try to read the audio book.  I have not loaded all of the songs on the player at the moment and I was wondering if this problem was something I got wrong, or if I was just a faulty drive.  This is my first mp3 player, so I'm new to this. :-)  The radio and the pre-loaded songs work fine.  I contacted the customer service, but have had no response.  Thought I would try the forum before you give them a call.

  I hope someone can help,

  El

  You must use a ripping software and extract the mp3 or wma files. The Clip + probably does not even support .wav files.