Monitor vSwitch

I try to get the name of the ESX host and the vSwitches, but I can't seem to get the ESX host name

Get-VMHost | Get-VirtualSwitch | Get-NicTeamingPolicy

Desired output:

Name VirtualSwitch ActiveNic StandbyNic UnusedNic FailbackEnabled NotifySwitches
--------- ------------- --------- ---------- --------- --------------- --------------
VSwitch0 HostName {xsigo_xnic1} {xsigo_xnic0} true true
vSwitch1 {xsigo_xnic3... True True

One way to do this is like this

$report = foreach($esx in Get-VMHost){
    foreach($sw in (Get-VirtualSwitch -VMHost $esx -Standard)){
        Get-NicTeamingPolicy -VirtualSwitch $sw | `        Select @{N="Hostname";E={$esx.Name}},
            @{N="VirtualSwitch";E={$sw.Name}},
            @{N="ActiveNic";E={[string]::Join(',',$_.ActiveNic)}},
            @{N="StandbyNic";E={[string]::Join(',',$_.StandbyNic)}} | ft -AutoSize    }
}
$report | Out-File "C:\report.txt"

Tags: VMware

Similar Questions

AppSpeed probe network ports

I read the Setup Guide and AppSpeed User Guide. I know that the probe comes with an interface management and the ability to monitor the 3 vSwitches. Can anyone confirm that in AppSpeed probe, the first interface is for management, while the 2nd, 3rd and 4th are for surveillance of vSwitches.
This information is not specified in the documentation.

Hi Erik,

Your description is correct. The first interface is dedicated to network management ("management" selected in the drop-down menu in the probe Setup screen). Three interfaces are dedicated for monitoring vSwitches chosen to be controlled by this sensor in the sensor installation window.

Network monitoring tools

What are the standard tools that I should have for network traffic monitoring in vSphere that can use port-mirror inside a vswitch to analyze traffic? Which providers currently offer these and how do they compare?

Hello

I think that this question boils down to the requirements and $s you want to spend. The key is to determine what you need to do first. There are several tools that make sense to use, but not knowing your full requirements, your existing incident response times, it is difficult to recommend a solution. You need to just Splunk or you may have something of the order of RSA Security Analytics. Or you can go to tools of active response.

My recommendation is that you take the time to attend RSA Conference (www.rsaconference.com) in April and look around, talking to vendors, etc. There are a multitude of solutions that may work for you. But first go with your needs (regulation + companies).

Best regards
Edward L. Haletky
VMware communities user moderator, VMware vExpert 2009-2015

Author of the books ' VMWare ESX and ESXi in the business: Planning Server Virtualization Deployment, Copyright 2011 Pearson Education. ' Of VMware VSphere and Virtual Infrastructure Security: securing the virtual environment ', Copyright 2009 Pearson Education.

Virtualization and Cloud Security Analyst: The Practice of virtualization, LLC - vSphere Upgrade Saga - virtualization security Table round Podcast

command to monitor the connection of ESXi 5 iSCSI storage

Hello
What is the command to monitor the charge of iSCSI (vmnic 1 and vmnic 2), I have done in a single switch & configured
It prescribes by vmware.
any more command to list the network traffic on each card network & vswitch.
??
Thank you

You can also use performance graph ordinary in vCenter to monitor the two streams of network interfaces for iSCSI, as well as the number of orders, latencies and similar.

vShield App - access Flow Monitoring via vShield API?

Hello world!
We want to get their hands on the information provided by the App Flow vShield"monitor"programmically. We found no detail on how to do this via the API of vShield. Anyone know how or have experience using the Flow' monitor ' in this way?
See you soon!

Hi, would like to understand how you want to use data more precisely. Today, vShield Manager collects a large set of data that comes to the microphones, and recovery of the flow bulk can be no optimal via REST... We don't have a way to retrieve the stream via the API for this reason. You are looking for a filtered or a search for style operation to retrieve specific streams or more doing timed calls for periodic flows? If it's the latter, potentially using the Netflow feature in our vSwitch can be an alternative method.

Do you currently work closely with vShield engineering team? Looks like an interesting use case, we would be delighted to hear from you...

port of mirror on a vswitch

did someone knows if it is possible to mirror a port on a vswitch so I can have a Network Monitor capture traffic from a guest operating system software?
It's on esxi 4.1

It is not possible, in terms of specific port, I think not, but you can watch using the Mode "Promiscuous" on your PortGroup or vSwitch.

http://KB.VMware.com/kb/1004099

If you have found this helpful at all prices please points using the correct or useful! Thank you!

Need help to find an adapter for a third-party monitor

Hi all! I find myself in need of a little guidance, and I hope that someone out there will have a quick n easy for me...

I have a Mid-2011 27 'iMac. which has two ports Thunderbolt It is taken with a Wacom tablet that I use constantly, and the other is made by an external hard drive to a solid state, which has a built-in cable to Thunderbolt (no way to hang it on a different port). I also have a 27 "HP monitor that is currently connected via an HDMI USB adapter.

The problem is that the HP monitor is actual "jiggy" - the USB does not seem fast enough to deal with requests for the monitor. It is almost unusable. I know I should run it via a HDMI adapter Thunderbolt, but as I have already mentioned the two my Thunderbolt ports are already in use.

Someone at - it ideas? I need sort of three to two ports Thunderbolt hooks, but I can't seem to find anything for less than $300 that would work. (I am illiterate when it comes to the different cables, adapters, ports, etc., so I hope someone can point me in the right direction by using short words... Most of the products that I travel through list specifications that me Chicane).

The monitor has two HDMIs and a VGA port, and my iMac has a Firewire 800 port, if that helps at all...

2011 iMac have only 1 Thunderbolt port and there is no such thing as a Mid-2011, you must have an iMac of year later, if it has 2 ports Thunderbolt. All the 27 "iMacs, from 2012 to 2015 the current have 2 ports Thunderbolt.

MBP: monitor detected but no image except by VGA

I have a MBP of Mid 2012 running latest El Capitan.

When I connect to an external monitor, it is detected correctly in views (exact name, resolution, etc.), but the monitor doesn't detect any image from the portable computer. I tried the DVI - D and DisplayPort with various cables and monitors with the same result, but a picture appears if I connect to VGA. It started in the past week.

The built-in display does not work normally.

Looks like a hardware failure in the computer DisplayPort connector laptop, as the pins are worn or something?

Any other ideas?

Hi johngirvin,

Thank you for using communities Support from Apple. Sorry to hear that you had these display problems with your MacBook Pro. Looks like you've been on the right track trying to solve this problem. If you continue to have problems, you can find the additional steps described in the following article useful, up to and including contacting Apple Support if necessary:
Get help with graphical problems on the external displays connected to your Mac - Apple Support

Concerning

Activity monitor close unexpectedly when running in the background on the left

Recently upgraded to Mac OS Sierra and Activity Monitor to close unexpectedly when running back plan left (do not smoke and open the activity monitor window) to a blank desktop when you use an application in another office. Clean install I tried but the activity monitor would still be down at random times when left running in the background to another empty office. Someone at - there experience this problem? For most browsing on the web using Safari on another desktop computer when Activity Monitor quit unexpectedly.

Activity monitor also using a lot of energy since the upgrade?

Any help would be appreciated. Thank you.

Model: MacBook Pro (retina, 13 inches, early 2015)

OS: macOS Sierra: 10.12 (installed via the upgrade, own installed after this problem).

Do not forget that you are using the activity monitor version which was installed when you upgraded to Sierra. Activity monitor located in the your Mac utilities folder.

If you have moved a previous version to a different location, it will not work.

If you are using the correct version, post crash report. Error reports lies in the application of the Console under System reports or reports from usersand end in the suffix .crash. If you choose to do so, omit or hide any information that you consider personal.

monitors external macOS Sierra + MacBook Pro 15 "+ 3 = gel

This facility has worked with El Capitan (2 Thunderbolts-> DisplayPort + HDMI 1 = 3 monitors).

Update of macOS Sierra - as soon as I connect a 3rd monitor (any order) - it freezes the whole system. Two monitors works very well

If I boot with three monitors connected, the screen goes black and I have to power down manually.

My system: MacBook Pro (retina, 15 inches, end of 2013)

Same problem reported by other users on SuperUser.com.

Someone else had a similar problem? Everyone is running the same configuration without problem? All known resolution?

There has been a lot of complaints of not being able to use the resolution full screen on 3 monitors of party, who has worked in El Capitan. I've seen all the problems such as you report.

However, I guess the graphics driver passed under changes in the Sierra, and it is possible, that this is yet another side effect.

You may very well be a bug, so that developers know that there is still another problem with the graphics driver Sierra

BugReporter (account free ADC (Apple Developer Connection) required for BugReporter)
<http://bugreporter.apple.com>

Anyone can get a free ADC account at:

How to document the application to another monitor

I have a setup of 3 monitor for work. I need to have my video capture software, Media Express, on the primary and secondary monitor. On my 3rd monitor, I wish I had Final Cut for editing.

Does anyone have a solution for this?

In setting system preferences displays, displays as an extended desktop, and then drag one poster rather than another. For more information, scroll down to the last section on how to "implement some screens for implementing mirrored and extended desktop":

Connect multiple monitors to your Mac

https://support.Apple.com/kb/PH19039

4 k monitor on macbook pro

I have a MBP 15.4 (retina) and need to find a 4 k monitor that will work with my MBP...

Hi Labecote,

Thank you for using communities Support from Apple! For more information on the use of 4K displays with your Mac, including system requirements and specific models that are known to work, you can find the following article useful:
With the help of 4K and Ultra HD TVs with your Mac - Apple Support screens

See you soon!

Strange shadows on the Sierra of the Mac OS on an external monitor

After upgrading to Mac OS Sierra, I noticed that there are these strange shadows. It of almost like the gradient of a shadow is not fluid and smooth:

Screenshots:

https://www.dropbox.com/s/dj6g3x68c9ggwez/screenshot%202016-09-24%2008.34.42.PNG? DL = 0

https://www.dropbox.com/s/2ql2prnhn2k27rz/screenshot%202016-09-24%2008.35.43.PNG? DL = 0

Is this normal, or is there a problem? Recommend a fix?

I'm on Mac mini (mid-2011) and a screen LCD Dell UltraSharp U2913WM 29 inches.

... However, if the screenshots are picking up, it seems less like a problem of monitor and more like an incompatibility of graphics cards with MacOS Sierra?

This seems to be quite normal. The windows are translucent, and what I see, this is the result of the image behind the window.

It was the same thing in El Capitan (and, I suppose, Yosemite, as well).

You can go to system preferences - > accessibility-> display and select "reduce transparency" if it bothers you.

1440 p monitor recognized as 1080 p over HDMI

I've updated to Sierra yesterday, and now my ASUS PB278 displays 1080 p instead of its native 1440 p over HDMI. This monitor has worked flawlessly with El Capitan and Yosemite on HDMI.

I also tried to connect more love at first sight with an HDMI adapter and that no longer works.

Anyone else having this problem?

Well Yes. Exactly the same problem you described. In light of this + problems with drivers for my Performance MX Logitech mouse (restless as hell scroll), immediately restored to El Capitan.

Will be held off the coast of the upgrade until this issue is resolved.

Running w / HR monitor AND headphones wireless w / Apple Watch 2 series

Since obtaining Apple Watch series 2, I've been out running with wireless headphones Powerbeats2 alongside the screen TickR HR, both related to the watch simultaneously via Bluetooth. While this works great, I wonder if I can do even better and lose the style HR chest strap monitor. Has anyone had success with wireless headphones that double as a monitor of human resources (e.g., Bose Soundsport Pulse), and specifies how was the heart rate?

Hello

Apple Watch includes a heart rate sensor built-in.

If you have not already done so, you can try to use this instead of an external monitor. When you use the application of the workout, the heart rate is measured continuously during the training:
- Your heart rate. What it means, and where on Apple Watch you will find. -Apple Support
- Work with your Apple Watch - Apple Support

Monitor vSwitch

Similar Questions

Maybe you are looking for