MBP: monitor detected but no image except by VGA

Similar Questions

• Tecra M5 - external monitor detected but not image

  Hello

  I just bought Tecra M5 for use with my external NEC monitor. However, regardless of the configuration, I try I get no image on the monitor. The LED on the monitor indicates that it receives the signal from the laptop but the monitor remains black pitch. The monitor works obviously very well, I just disconnected from another laptop.

  I tried all possible settings in the nVidia control panel, but without success. I also changed "Power On Display" in the BIOS "Screen LCD + Analog RGB" but no luck either.

  I have v.3.70 of BIOS and graphics card drivers v.7.15.

  Can anyone help?

  Thank you
  Mike

  PS When I press Fn + F5, I have no options to choose from, unlike the other FN +... combinations. I don't know that it should be everything, but it is perhaps worth mentioning.

  Also when I select only 'use a view' of the nVidia control panel and select my NEC monitor in the list, the monitor turns on and the light turns green, but the screen is still black. Like I can't accept changes the output switches to the computer screen after a few seconds.

  Hello

  I think you should test with the preinstalled Toshiba operating system.
  After that the laptop was recovered, connect the external monitor and use the FN + F5 in order to detect the external display.

• When I start RCT3, I can hear the sound of the game, but the image disappears. It's almost as if the monitor is disconnected from the computer. This could be the cause?

  Original title: race Roller Coaster Tycoon 3

  When I start RCT3, I can hear the sound of the game, but the image disappears. It's almost as if the monitor is disconnected from the computer. This could be the cause?

  Hi Redbaron666,

  Have you checked if the game works the clean boot?

  I see that Rollercoaster Tycoon 3 is not compatible with Windows 7 which could be the cause of this problem:

  Windows 7 Compatibility Center

  Method 1: You can run the game in compatibility mode and then check

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  Thanks and greetings

  Ajay K

  Microsoft Answers Support Engineer
  ***************************************************************************
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows 7 photo viewer will not display all images, except in slide show mode.

  I use a laptop computer with a monitor connected via a dock of the USC.  Everything worked fine until today.  When I use the monitor as the only display, windows 7 Photo Viewer does all the images except in slide show mode.   To be more precisely, after clicking on the file, Photo Viewer displays "loading".  If you wait long enough, the image appears later, but if you move or the zoom, the image window disappears.  If you go to the slide, the image appears immediately.  However, if I use my laptop screen, or both screens in extended desktop, Photo Viewer works very well.  Basically, as long as the screen of the laptop is off, photo viewer gets confussed and cannot function properly in slide show mode.

  I read through existing similar questions, but impossible to find a solution.  Help, please!  Thank you!

  Hello

  Welcome to the Microsoft community. According to the description, you are unable to view pictures in Windows Photo Viewer.

  ·         You get the error message?

  I'll help you with this problem. I suggest you follow the steps provided by Marilyn O from the link:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/Windows-7-photo-viewer-wont-open-any-images/eceac40b-3424-4AC9-9224-42640e92bac5

  For reference:

  View and use your pictures in Windows Photo Viewer

  Change the programs that Windows uses by default

  I hope this helps. Let us know if you need help with Windows related issues. We will be happy to help you.

• External monitor works but integrated screen is not

  Hello

  I have a model of Macbook Pro 13 of the retina (mid-2013) .

  A few months back the display has stopped working, but when I hooked to an external monitor everything worked as expected except the screen of course.

  I took it to the service center and a descent computer repair shop and they both said that display connection with the logic board is fried and they need to fix the logic board that retina display is fine.

  The price they are quoting is about $ 900, which is not fair.

  The logic card cannot be repaired?

  anyone else in a similar situation?

  If all the otherwise failed I think I'll delete the entire display of macbook. Someone knows how to do this?

  Thank you!

  Welcome to the CSA!

  Because of the tiny parts and connections on a logic board, repair is usually not an option. I don't say it can't be done, but it's hard to find someone who can / will work on resolder delicate bits on a LB (redistribution) without making a mess of labor law.

  You live in the United States? If so, ask about a "repair." Instead of working on the computer in the Apple Store, they send to Apple rehabilitation center where they pretty much fix everything what they find wrong inside (with the exception of the display unit itself) for a flat rate that is much lower than the cost that you quoted for repair in the store. I believe that the current price for this service is approximately US$ 315.

  The only downside I see is that the repair takes about a week, largely during the transportation to and from the depot.

  If you are not in the United States, ask anyway. I don't know what Apple has implemented for this kind of repair outside the United States.

• Why all of a sudden my monitor shows a double image of everything? I checked all the controls in the monitor. Have complete scan of the system. Restarted. Help please!

  Why my monitor see suddenly double images? A bit like a 3D cube. I checked all the settings in the screen itself. They are very good. A comprehensive security system has to analyze. He came clean. Cache of cookies. Defragmented. Restarted. Is entered in controls and found nothing out of the ordinary. But then again, I'm not very savvy computer. Help, please!

  Borrow a monitor from a friend and attach it to your computer, if possible, attach your monitor to your friend's computer.  If the monitor remains screwey computer your friend then the monitor is dying and needs to be replaced.  If the monitor of your friend looks like screwey on your computer, you'll have a hardware problem that must be solved.

• Adobe Premiere Elements 12: not compatible with EXECUTE-programm for my monitor detected an update is necessary.

  I got the message during the opening of a new project in Adobe Premiere elements 12: not compatible with EXECUTE-programm for my monitor detected an update is necessary. I tried several updates but windows7 does not detect an update. What can I do?

  Update your graphics driver.

• How to use an external video monitor for just the image being set?

  I would use my external HD monitor as a single image display in Photoshop that I adjust

  the image, similar to what I do in Final Cut Pro to display full screen of the external video monitor. 

  Anyone have to do this?  rather than simply dragging the full interface of the PS to the external monitor,

  and stretching on to fill the screen on the larger screen?

  Duh!  Now I feel real stupid.  The solution was very simple for me, using my MacBook Pro, Intel processor

  OS 10.8.5, with outputs of Mac screen, through to DVI converter, feed my Dell HD 1920 X 1200 monitor.

  There is no instructions for it, but I just click and drag in the "document" tab in the public Service

  Center the window interface and drag it on my external monitor.  And the controls, settings, et al.,.

  work therefore monitor on the image in the external hard drive.  And Mac do rotations display preferences

  for this monitor for my vertical images.  Your Dah!

  Thanks for all your comments, folks!

• Monitor problem - gray without image areas

  Lightroom does not display images on two of my monitors.

  I just bought a beautiful Dell U2711 monitor, configure it as the main monitor, and is connected via display port.  It's on an ATI Radeon HD5770 (1Gig) card, with two other monitors (which use the DPI port).  Operating system is Vista 32 bit. (Intel Quad CPU @2. 4 GHz, 4 GB of RAM 4 carrots.)

  How can I make Lightroom 3 show photos and not gray boxes?  LR only displays photos on screen 3 (a smaller Dell).  All I get on the main monitor (2) and the third (1) monitor are gray boxes.  I tried the "secondary monitor" settings but they still don't work - get only grey boxes on the other two monitors, no image.  Not exactly what I was hoping.

  BTW - Lightroom 1.4 works and shows pictures on all three monitors, is that version 3 that has the problem.

  Hope someone can help me here.

  Your monitor profile is corrupt. Switch monitor profile sRGB or better yet re - calibrate the monitor using the [hardware/software designed.]

• I only get sound but no image or picture on YouTube-what to do?

  I only get sound but no image or picture on YouTube-what to do?
  I now use 'Chrome' browser whenever I want to visit YouTube,
  I do not wish to use 2 browsers and I want to stay only with Firefox.
  I tried several solutions without success.
  Help!

  YouTube is generally serving Firefox users the HTML5 player now instead of Flash player. You can check that one you get by right clicking on the drive and runs the inspection of the line at the bottom of the context menu. As patches are probably completely different for both players, it would be useful to know the problem.

  There is also an add-on, you can use to switch the player if you want to try it (so it is easier to do using built-in YouTube settings): https://addons.mozilla.org/firefox/addon/youtube-flash-video-player/

• I get emails with pictures and when I send them to others. they open them but the images are not displayed. The photos are there when I send them. Thank you

  I get emails with pictures and when I send them to others. they open
  their place but the images are not displayed. The photos are there when I send a
  them. Thank you

  Make sure that your security software (antivirus) is not blocking attachments.

• iPod has been detected but cannot be identified correctly-HELP

  So, less than a month ago I bought an iPod nano 7th generation and when I bought it, it was fine and I downloaded all my music on it. Tonight I went to add the music more and I get the following error message - "an iPod has been detected but could not be identified properly. Please disconnect and reconnect the iPod and then try again. »

  I tried the following:

  -Plug the machine again and I tried all the USB ports.

  -Restart of my PC

  -Uninstall and reinstall every product Apple on my PC

  -Go to the Device Manager and of the driver updates

  -Go to C: / > Program Files > common files > Apple > Mobile Device Support > drivers > usbaapl64 > install

  All in vain-_-

  I am running Windows 64-bit 10.

  Any help is really appreciated, thanks in advance

  Uninstalling and reinstalling each Apple on my PC product

  Try to do this again, the procedure described in this document of Apple.  It lists all the components of an installation of iTunes and the precise order to uninstall, and measures to confirm everything was deleted

  Remove and reinstall iTunes and software for Windows 7 and later versions - Apple Support components

  Then, download and reinstall the latest version of iTunes

  https://www.Apple.com/iTunes/

• iPod nano detected but not recognized, why?

  My wife has an ipod Nano 7 G. We have 10 Windows and iTunes 12.3.3.17. It worked fine for months. But today it has plugged his ipod, and he wiped all the music on the ipod, suffice it to say that she is not happy. She then unplugged, plugged in, and now she is ' ipod detected, but is not recognized.

  I uninstalled / reinstalled iTunes. I followed the process to update the driver. But it still does not work. What else can I do to make it work again. In its current form the ipod (just a few months) is essentially useless.

  If you have already tried to uninstall iTunes, you are probably not completely remove iTunes and software components.  This Apple document lists the components of the installation of iTunes and the precise order to uninstall

  Remove and reinstall iTunes and software for Windows 7 and later versions - Apple Support components

  Then, reinstall the latest version if iTunes

  https://www.Apple.com/iTunes/

• I have kernel_task, in my mac pro book, I can see it in the activity monitor is but cannot remove ' tried everythin... I'm lost now... Please help

  I have kernel_task, in my mac pro book, I can see it in the activity monitor is but cannot remove ' tried everythin... I'm lost now... Please help

  Tried force quit.

  What happened to restart? When you restart your mac, the process begins again.

  Another option is abandonment of the process with the terminal. Just search in google for it.

• Win XP (32-bit) with iTunes 12.1.3.6: iPod Nano A1320 16 GB error: an iPod has been detected, but it could not be identified properly.

  I have the following environment:

  Win XP SP3 (32 bit)

  iTunes 12.1.3.6

  iPod Nano A1320 16 GB (5th generation)

  I get an error when I try to connect my iPod Nano A1320 16 GB (5th generation):

  An iPod has been detected, but it could not be identified properly.

  Please disconnect and reconnect the iPod and try again.

  If the problem persists, uninstall iTunes and then reinstall iTunes.

  I tried my other iPod Nano A1320 16 GB (5th generation), and it gives the same error.

  I looked at other similar positions with this error message and tried their solutions, but none of them does not seem to work.

  However, my iPod Nano A1285 8 GB (4th generation) is recognized by iTunes 12.1.3.6.

  Any suggestions? Thanks in advance for your help.

  Since it's Windows XP, it's maybe the old problem of the "drive letter".  Being a Mac user, I don't know the exact procedure, but try changing the drive letter of the iPod.  Maybe that's how

  Change the drive letter for iPod