Mono to stereo

Similar Questions

• How can I change the sound of the recording of mono to stereo?

  How can I change the sound of the recording of mono to stereo on my PC? Try to convert vinyl to my pc. I use Windows 7 64-bit on an HP PC.

  CL12

  Thanks, but I reloaded the software and it works!

• Alternating the problem of Capture DV Mono or stereo

  I'm captures old video tapes digital (not analog bands although it happened there also) in v.2015.4 Premier Pro. From a single band that I captured several segments. The video is very good, in all but one of the only audio capture happens on a single 16-bit stereo channel as it should, but in the first capture of the Ribbon comes on 4 different channels 16-bit - Mono 4. Channels 1 and 2 are probably L & R tracks although I see no difference in the waveforms. Chanel 3 and 4 are empty. The original recording is in stereo. It is a bit of a pain because two audio tracks need to be adjusted independently and not as a single setting performing simultaneously the two L & R. I can miss some audio information too. Is there a way to set capture and audio settings always comes as a simple stereo channels, I can't find.  Or?

  Help appreciated.

  Greg

  It is a good alternative.  Thank you.

  But I think that I thought about it. I got to thinking a little deeper and more logically. It is only the beginning of a capture of Ribbon and remains so through the balance of this particular shot, no matter how long. In addition, I realized it only happens when I start the initially absolute capture of the band, on the head or the Virgin band HDDR. When I moved the band on a spot just a few images in the recorded video real audio capture although stereo. As I think about it, it makes perfect sense.  There is a signature on the tape for audio, or mono or stereo, as the capture begins. The default value must be mono that it holds in all of the capture.

  Problem solved.

• Satellite 2410-414 card sound to mono or stereo?

  Is it possible to record in stereo from an external sound source using the map of his yamaha ac - xg? Is it possible to activate the line-in input in the audio settings and volume? Taking entry adjustable upward for stereo recording or does only record in mono?

  See you soon

  Hello

  As I know the unit has only a microphone in jack and headphone jack.
  The microphone jack allows you to connect a stereo microphone or three drivers mini jack for mono microphone or audio input. Line output, audio input jack line jack and line taken S/PDIF output not available on this device.

• Mono to stereo on Premiere Pro CC 2014 Windows 8.0

  Got cut several times with the India today.  Deadline for the approach.  Not informed (e) a sprout earlier and recorded in mono.  Read the tutorial.  He appears to have been written for CS6.  Got two titles each left and right in the source area, but still the track showed audio.  Moved to the timeline with an audio track, additional audio right okay but left audio, but it showed volume, does not seem to be in harmony with the correct track.  Help!  Don't know how it works so my email is [email protected]. 

  
  

  Thank you.
  

  Thank you.  I found "sound effects" and found "Filler on the right with the left" and "Left Fill with the right", but a brackets that says there: "works only when recorded in stereo."  That's my problem, as a beginner, I recorded two stories on a single channel.  Now to charge for news TV Server, I need to have something on both channels and have not figured out how to do this.  I think the well-meaning responses, I'm getting the 'Community' come from users CS6 where apparently it was simple to do.  Under the new system of Adobe, you must use the 'cloud' so I use first Pro CC 2014 and some very simple solutions I read just don't seem to happen in 2014.

• Do single mono channel stereo left channel?

  I have a stereo audio clip in which only the left channel has been used. I'd like this spread to the left and right - mono, right? I saw a number of Audio effects in my copy of PPro CS6, but I don't see how. Probably very easy and I'm not going to hit my forehead... ?

  Thanks in advance for any help on this.

  On the effects tab, open Audio effects and you should see the left or right fill effects fill. It takes the left (or right) channel and puts it on the two outputs Earth R, ignoring the right channel in the file.

• How can I add a stereo or mono mix to the sound engineer - Satellite Pro A100-196

  I can't find this option in my settings of the sound, no mono or stereo under record?
  is it possible to add this feature to my laptop?
  or is it possible to do to the sound settings to make them?

  Hello

  Can you please tell us what how you save the music? You want to import from an external device? If so how is it connected to your laptop?

• Satellite A100 - recording control - no Mono mix or stereo

  Hello

  I have this RealTek Audio Drivers installed in my laptop and when I go to check the registration, it has only 'Volume of the CD', 'Mic Volume' and 'Volume line' available. I know if I need to record sound directly from my laptop without using the microphone, I need "Mix-Mono" or "Stereo Mix" in my control recording, but I have this two components. How can I add these two things. I hope that I clarify my issues here. We hope to get solutions here. Thank you very much! =)

  Hi Jimmy

  I studied a bit in this forum and found this forum thread:

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=16446

  The recommended thread seems to provide the information you are looking for.
  Pleas post back if it works or not.

• Premiere Pro CC: Of Keyframing Dual-mono (stereo) Audio

  Hi all

  OK, well, the title of example I have of is from 1 to 2 stereo audio source, recorded and 1 voice is music.

  In this case, my sequence is prepared as mono tracks and when this happens, I'll have 4 audio layers in sequence.

  -time passed and changes are made-

  and it's time to do the audio balance. When I add a keyframe, it only affects only one channel of the layer, not the two channels at the same time.

  How do I change the preferences to keyframe so it will have an impact on the L & R channel on dual mono source (stereo)?

  Thank you

  H

  -howie @ goasean. com-

  How can I change the preferences to keyframe so it will have an impact on both L & R channels?

  Place a stereo clip in a stereo track.

  Apart from that, you can't.

• Mono (left channel only) stereo

  Accidentally, I recorded a video on only the left channel.  It is to be exported by using two channels.  How to play on both channels.  In the Adobe tutorial, he said, "in the project Panel, select a single element.  Choose item > modify > Audio channels.  In the Edit Clip dialog box, select Mono in stereo mode, click OK.  In the dialog box change Clip I have it on Adobe Creative Pro Cloud CC 2014 shows:

  Audio channels

  Screening: What is set to?

  Number of Audio tracks: what?  My video is only recorded on the left channel

  Format of channels: Stereo; Mono; 5.1; Adaptive.   To accomplish what I need, should what setting I use?

  Preserve channel assignments: check or not?

  Active channels per track: what it is set to?

  If your clip on the timeline is stereo, with audio only on the left (or to the left is the one you want to listen to), go to the Audio effects and add "fill left", who will be the left channel, put also on two L + R (and silencing all sounds which stood on the right lane).

  Thank you

  Jeff Pulera

  Safe Harbor computers

• How to convert a stereo audio chanel in mono?

  Hello

  I have to work on a project of CS5 with stereo audio in the timeline panel (and it is too late to import it back the file and choose to split the mono 2 stereo). On chanel, left, I have no sound and on chanel R. If I put the command of IBC, on the left, how to assign right AND left in the master? How to convert a mono 2 stereo audio file in hearing?

  Thanks for your help,

  Olivier Madar

  Use the left or right audio effects fill fill, depending on which channel contains the audio you want to duplicate. You can use these effects to the clip level, since the effects bin, or you can select and use them in the stack of effects in the mixer Audio Panel for a particular track. The video effects allow you to isolate individual items, of course, while track effects will affect the entire track.

• Old stereo recordings

  I don't remember what thread I was reading when I read a comment about old stereo recordings with a separation full of instruments and/or voices and how boring it is listening with headphones.  I agree it of annoying and is mainly due to the studios tinker autour with "new technologies".  Regardless, if you find it embarrassing so there is a program that can help you.  It is called Audacity and is free.  I was listed in PC magazines to 101 Freebies in 2007 & 2008.  I know it will allow you to convert the mp3 to mono and I think that you can copy only one channel and add it to the other which could produce a stereo type effect.  The program will do a lot of things.  The most common thing that I use is to shorten the length of a track.  Suppose that a track is 12 minutes, but you want a shorter version for some reason any.  You call the mp3 file, you find a good place to disappear from the track.  To highlight about 5 seconds or so, select gradually remove tools and it fades the volume.  You highlight the remaining part of the song, then select cut.  Now you have a shorter version of the track, you can export to an mp3 file.  It can do things like change the pitch, increase the volume.  One of my friends uses quite frequently in his video production.  Volume multiplier, I found useful on the recordings I did of conferences and other.

  As I said, it's free and works very well.  When you install the program, it will ask you if you plan to export to MP3, and give you a codec blade.  It is the only weird thing for me about the program.  MP3 is the most common audio format and it would be by default when you save, but you will need to select export as MP3.

  Orion, and al. ;

  Until the mid to late 1960s, nearly all popular music has been mixed for Mono. There was some exceptions in the "audiophile" RCA, Decca and other records. When these recordings were made for the stereo, there was almost zero effort put the tracks in the mixer. The result is painful to listen to.

  Why do you prefer Mono to stereo? Well, because if you are interested in the music as it was intended to be heard by engineers, artists, it's what you listen to.

  A recent example, take the Beatles albums "remastered". First of all, the stereo mix on the previous records has been redone using the master tape. The result is stereo more as we are accustomed to hearing - as a "Soundstage" audio mix from left to right. However, a 'limited' MONO recordings box collectors sold (at a HIGHER price to the same value in stereo) so fast that Apple/Capitol/EMI had to Flex and expand considerably the production. People paid more for mono, because that's how George Martin and the EMI engineers were confusing.

  Try listening to the original tracks of Rubber Soul (most) of the Beatles with headphones (not bad on a stereo room). It almost hurts.  The original poster made a valid, though observation for a niche market.

• 5.1 (pseudo) mix stereo audio HDV

  I did a lot of research on this... and people in the forum still helped me to find a way to make my mixing 5.1 on a Blu - Ray disc.

  But now I have a problem of mounting...

  I used the Adobe tutorial on how to set up a 5.1 sequence... I install a new 5.1 master sequence and he said I want 6 5.1 channels.  I then copied the same audio track to each of the 6 channels in the project window.  If I use submix channels, I assume that you do not get the rear washer by the tutorial so I need 6 masters?  It is clear that you choose 5.1, but not so clear on if you import audio stereo, how master and mixing of tracks for the installation program.

  I want to take my stereo mix and 'it' through the soundstage 5.1. I know that's not true 5.1, but I don't like.  I did it with any NLE and if the rear channels are low, it offers a nice mix.

  I think Miss me some steps... I have to separate my audio captured HDV stereo mono or just leave it as stereo?

  And despite everything, once I had my 6-channel and moved the washers autour, he didn't was out 5.1 to my PC speaker system.  It is an installation 5.1 with a Creative X - FI titanium sound card.  I get 5.1 when my other NLE editing.

  I have read all the help files on the choice of my hardware audio audio betweem of WDM and ASIO creative.  However no choice gives me my rear speakers when editing audio.

  I can read that I need to configure my output audio mapping... and I need 'Tileslide the channel of the sequence desired in compliance with the material in the list channel.'  However, I don't have speakers appears twice... and they appear on the left and right... Even though I have 6 audio channels in the sequence and a map 5.1 sound and the configuration speakers.

  The questions are:

  (1) what should I change to hear 5.1 audio when editing.

  (2) for what I'm trying to do, should I split my audio captured in mono channels or leave the stereo form.

  (3) how can I configure my 5.1 sequence in order to achieve my goal.

  I apologize if this is something simple.  I did the reading and research and can not make it work...

  I feel I'm close enough to be able to make the transition to the much more powerful tool.  The video part is quite simple.  However, I have questions on the audio portion.

  If it's CS4 and a question of photo, I could probably answer!

  Thank you

  BJBBJB1

  OK, I am correct that you have one 2-channel (dual mono or stereo) Audio source stream?

  I would create a project/sequence with a 5.1 master and two stereo Audio tracks. Place an instance of the element 2 channels on each of the two Audio tracks. Now, in the Audio Mixer Panel, locate the two Clips on the "sound stage" with the washers for each Audio track.

  I would use the central channel on the first switch (Audio track 1) increase the supply of the center channel a bit, but leave the zero value in the Clip on 2 Audio tracks. I would like to add some of the Audio Track 1 power to the LFE input, but not too much.

  Now add stereo Audio Effects > Reverb and Delay on the Clip audio track 2 and probably he alleviate a few dB down from the level 1 Audio track. Experiment with the settings on these two effects.

  PrPro does not allow the pure creation of the LFE channel, but you can do it at the hearing, if you use 6 discrete channels sources in a multi-track Edit. I use it to create DTS streams, to be used as additional streams in yet.

  This should help you good fake 5.1. Now, you should export this way SurCode DD 5.1 SS plugin. There is an entire article about the conduct of a "poor DD 5.1 SS", but I never tried, as I SurCode DD 5.1 SS plugin, as well as the SurCode DTS encoder. I'll get this older article.

  Good luck

  Hunt

• Retiming does not not on surround sources

  I have a problem using logic to reprogram cinema surround sources. I use Pitch' no time did a great job of Retiming of mono and stereo sources and working happily in ProTools, which we don't have.

  But once a surround source is used in the logic and a speed control is composed, (such as-4% for the 25 > 24 fps Retiming) rebound resulting is the same in time to the source. This occurs using NTP and also one of the algorithms. Nothing works except mono tracks, which destroyed the Retiming of split engine block beautiful phase.

  Anyone else had this?

  In fact, I'm wrong - or perhaps in law in a different way - it seems to be the choice of Surround sound in the bounce dialog box that fires it upward, regardless of the source.

• HP Pavilion g7-2251dx: Windows 10 IDT high definition Audio Driver Bug report.

  OK after upgrading Windows 8.1 for Windows 10 Home (The Free Upgrade) I have noise problems.

  IDT Sound Drivers (IDT High Definition Audio Codec):

  Speakers integrated into the laptop: they its OK but not as they did in point 8.1 of Windows.

  I've tested on the following:

  Music (sounded OK)
  Played a Youtube video (sounded OK)
  Played a video that I recorded on my PC (its OK)
  Played a show or a movie on Netflix (sounded OK)

  The portable built-in Microphone seems to be working well.
  
  Turtle Beach headset Z11: they sound like basically no Bass Mono instead of stereo there and The Sound is low even though the volume to 100.

  I've tested on the following:
  Play music (sounded bad)
  Played a Youtube video (sounded bad)
  Played a video that I saved on my PC (sounded bad)
  Played a show or a movie on Netflix (bad sound)
  
  In Windows 8.1 speakers embedded in the laptop and the Turtle Beach headset Z11 resembled stereo and strong (perfect).
  
  The helmet Microphone seems to be working very well.
  
  I plugged my headphones Z11 of Turtle Beach to HP from my sister who still has windows 8.1 and my Turtle Beach Z11 helmet sounded very good.

  I plugged my Z11 of Turtle Beach headset in my other sisters that has Windows 10 HP (she has upgraded to Windows 7) and my Z11 of Turtle Beach headset resembled Mono Stereo Instead of.

  It is also plugged into his ear and they looked like Mono Stereo Instead of.
  
  I tested another helmet my Turtle Beach Headset (This Headset plugs into the USB Port) P11 The Sound is perfect it sounds like stereo and not like Mono.

  However when I spoke into the microphone, I could hear my voice coming through the headset speakers (mainly the hearing talk me)
  -------------------------------------------------------------------------------------------
  Microsoft high definition Audio drivers:

  These major works of Drivers so if you just want to use these drivers:

  Uninstall driver IDT
  Restart your computer
  Next adjustment of Volume and other settings
  Right-click of your Volume icon in hand right corner
  or
  Right-click on start (the white Windows icon located to the left of the bottom of your screen)
  Click on Control Panel
  Click on hardware and sound
  Click sound
  Right click on the second peripheral speakers (or according to your to are called)
  Click on properties
  Now just go through each tab and change what you want to change.

  I only click on the Advanced tab, and then change the default Format for 16-bit platforms, 48000 Hz (DVD quality)
  Because that was what the default Format on Windows 8.1
  I also click on record and change the setting of the microphone 2 listed.

  Speakers integrated into the laptop: they its OK but not as they did in Windows 8.1

  I've tested on the following:
  Music (sounded OK)
  Played a Youtube video (sounded OK)
  Played a video that I recorded on my PC (its OK)
  Played a show or a movie on Netflix (sounded OK)

  The portable built-in Microphone seems to be working well.

  Z11 headphones Turtle Beach:

  I've tested on the following:
  Play music (sounded great)
  Played a Youtube video (sounded great)
  Played a video that I saved on my PC (sounded great)
  Played a show or a movie on Netflix (sounded great)

  The helmet Microphone seems to be working very well.

  Always noticed his Mono with your helmet?

  Try this:
  Plug in your headphones
  Right-click of your Volume icon in hand right corner
  or
  Right-click on start (the white Windows icon located to the left of the bottom of your screen)
  Click on Control Panel
  Click on hardware and sound
  Click sound
  Right click on the second peripheral speakers (or according to your to are called)
  Click on disable
  Right click on the second peripheral speakers (or according to your to are called)
  Click on Enable
  Now your sound is heard as stereo instead of Mono.

  --------------------------------------------------------------------------------------------
  I tried the sound of setting here is what I tried:

  I uninstalled IDT audio driver I went into Control Panel and uninstalled the IDT Audio driver.

  Then I restarted my computer and I reinstalled the drivers of HP's Windows 8.1.

  After restarting my computer again, I checked to see if everything was back to normal, but it is not yet sounded even.
  
  When I right click on the "speaker" icon and then choose playback devices here is what was posted:
  The top unit is called:
  Its digital display (AMD high definition Audio Device) not connected
  OK, this is Normal.
  
  The central device is called:
  Speaker / device by default HP (IDT High Definition Audio Codec)
  OK, this device is also Normal.
  
  The background feature is called:
  Communication by default communication device Headphones (IDT High Definition Audio Codec)
  OK in Windows 8.1 this device has been disabled by default but in Windows 10 it is activated and listed as default communications device.

  So I thought that if I just disabled it my Turtle Beach P11 helmet would return to normal, but it didn't she sounded still, I even restarted my computer.
  
  OK, so I tried to set the Communications headset as device by default but when I right click and click on set as default device it wouldn't let me.
  
  I then disabled speaker / HP and tried to set it as default device it wouldn't let me.
  
  When I disabled speaker / HP Groove Music said he could not detect an Audio device in order to activate the speaker / HP and people with disabilities
  Helmet of communication.
  ---------------------------------------------------------------------------------------
  My computer is a HP Pavilion 2251dx g7

  Audio ID:

  Computer built-in Laptop speakers:
  HDAUDIO\FUNC_01 & VEN_111D & DEV_76D9 & SUBSYS_103C184B & REV_1001
  HDAUDIO\FUNC_01 & VEN_111D & DEV_76D9 & SUBSYS_103C184B
  
  Turtle Beach z11 headphone 3.5 mm Jack:
  Sorry no Audio for this one hardware ID that he doesn't use the same above, I think.
  
  P11 headphones from Turtle Beach USB:
  USB\VID_10F5 & PID_0231 & REV_0100 & MI_00
  USB\VID_10F5 & PID_0231 & MI_00
  
  If you need more info let me know.

  Thanks for reading all of this I hope that soon, there is a Solution.
  ------------------------------------------------------------------------------------------
  A temporary Solution:

  After you have solved the problem by reading through countless messages try every difficulty that none of them I went into Control Panel and he took a glance at the the Dolby Advanced Audio Control Panel now I never tested with this before so far but I was able to fix the Audio questions here is exactly what I did :

  When you use your built-in Laptop speakers or possibly other speakers:
  Right-click on start (the white Windows icon located to the left of the bottom of your screen)
  Click on Control Panel
  Click on hardware and sound
  Click Dolby Advanced Audio
  Click on listening experience
  Check Dolby Advanced Audio

  I've tested on the following:
  Play music (sounded great)
  Played a Youtube video (sounded great)
  Played a video that I saved on my PC (sounded great)
  Played a show or a movie on Netflix (sounded great)

  When you use your headset from Turtle Beach Z11 or possibly other headphones:
  Right-click on start (the white Windows icon located to the left of the bottom of your screen)
  Click on Control Panel
  Click on hardware and sound
  Click Dolby Advanced Audio
  Click on listening experience
  Uncheck Dolby Advanced Audio now, your headset should ring loud instead of sound like Mono and stereo and crappy.

  I've tested on the following:
  Play music (sounded great)
  Played a Youtube video (sounded great)
  Played a video that I saved on my PC (sounded great)
  Played a show or a movie on Netflix (sounded great)

  You need to keep the box checked when you use your built-in Laptop speakers, otherwise they will sound like Mono and crappy.
  
  So basically when you plug in your headphones uncheck the box.
  
  So basically when you disconnect your headset check box.
  
  If you have messed with the implementation in and want to return to the default value:
  Click Advanced settings
  Click on Reset

  IDT Sound Drivers (IDT High Definition Audio Codec):
  Always noticed his Mono with your helmet?

  Try this:
  Plug in your headphones
  Right-click of your Volume icon in hand right corner
  or
  Right-click on start (the white Windows icon located to the left of the bottom of your screen)
  Click on Control Panel
  Click on hardware and sound
  Click sound
  Right click on the speakers of intermediate device / HP (or according to the your are called)
  Click on disable
  Right click on the speakers of intermediate device / HP (or according to the your are called)
  Click on Enable
  Now your sound is heard as stereo instead of Mono.

  Microsoft high definition Audio drivers:
  Always noticed his Mono with your helmet?

  Try this:
  Plug in your headphones
  Right-click of your Volume icon in hand right corner
  or
  Right-click on start (the white Windows icon located to the left of the bottom of your screen)
  Click on Control Panel
  Click on hardware and sound
  Click sound
  Right click on the second peripheral speakers (or according to your to are called)
  Click on disable
  Right click on the second peripheral speakers (or according to your to are called)
  Click on Enable
  Now your sound is heard as stereo instead of Mono
  ----------------------------------------------------------------------------------------
  I'm testing all my games to ensure that the work of games and the sound works.

  I use my temporary Solution to test all the games.

  After resetting my PC the sound worked fine with my temporary Solution.

  Castlevania: Lord of Shadow Ultimate Edition:

  The sound was great on my Turtle Beach Z11 helmet.

  Castlevania: Lord of Shadow 2:

  The sound was great on my Turtle Beach Z11 helmet.

  Darksiders Pack franchise:
  Darksiders II:

  The sound was great on my Turtle Beach Z11 helmet.

  Darksiders:

  The sound was great on my Turtle Beach Z11 helmet.

  Deus Ex Human Revolution - Director s Cut:

  Download still can not test it yet.

  The Elder Scrolls IV: Oblivion Game of the Year Edition:

  The sound was great on my Turtle Beach Z11 helmet.

  The Elder Scrolls V: Skyrim legendary Edition:

  The sound was great, but even with my temporary fix the sound on my headset Turtle Beach Z11 was low I actually had to put the Volume slider almost up just to hear everything correctly.

  Fallout New Vegas Ultimate Edition:

  The sound was great on my Turtle Beach Z11 helmet.

  Grand Theft Auto IV: Complete Edition:

  The sound was great on my Turtle Beach Z11 helmet.

  Metal Gear Rising statement:

  The sound was great on my Turtle Beach Z11 helmet.

  Soul Murder Suspect:

  The sound was great on my Turtle Beach Z11 helmet.

  Quantum Conundrum:

  The sound was great on my Turtle Beach Z11 helmet.

  Saints Row Franchise ultimate Pack:
  Saints Row 2: download still can not test it yet.

  Saints Row third: download still can not test it yet.

  Saints Row IV:

  The sound was great on my Turtle Beach Z11 helmet.

  Sleeping Dogs final edition:

  Download still can not test it yet

  Thief: Master thief Edition:

  The sound was great on my Turtle Beach Z11 helmet.
  ------------------------------------------------------------------------------------------
  I could not Downgrade from Windows 8.1 because it said that files deleted even if windows.old was still there, so I just did a Reset instead.

  Thanks to my temporary fix Audio problems are gone, but I hope that HP releases new drivers, so I can't use my temporary Solution.

  Also I hope HP or Microsoft releases new drivers for the Synaptics TouchPad so that people can save their settings.

  This has been corrected by James Yerkes on Microsoft Community:

  Open regedit.exe

  Navigate to:
  HKEY_LOCAL_MACHINE\SOFTWARE\Synaptics\SynTP\Install

  Note it's the LOCAL MACHINE, not the CURRENT USER.

  Search for a key in the installation folder called DeleteUserSettingsOnUpgrade

  Double click and change the value to 0

  Now go back in the Panel of Synaptics, put all how you like and restart.

  in any case if someone has problems with Windows 10 Post here and I'll see if I can help you but I recommend resetting your PC in recovery Menu so that most of the problems will be solved then I would install all my drivers from the manufacturer.

  I am currently using window 8.1 1 driver from AMD and HP drivers.
  -------------------------------------------------------------------------------------------------
  This may not work for everyone, but if you have the same laptop and headphones I don't then it should work.

  I posted this as well on Microsoft Community:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_10-other_settings/Windows-10-IDT-high-defin...

  ---------------------------------------------------------------------------------------------------

  Hey everyone here is an update.

  Since microsoft rolled out updates for windows 10 mainly the updated driver to update I had is no longer using the old methods such as the use of the old HP drivers to this windows 10 drivers working for my laptop then everything works fine.

  I always use drivers from AMD for My APU (CPU and graphics card), but everything else is Microsoft I using Microsoft drivers for the month now and have had no problem.

  I hope that everyone knows success with these drivers.