Mono (left channel only) stereo

Similar Questions

• Do single mono channel stereo left channel?

  I have a stereo audio clip in which only the left channel has been used. I'd like this spread to the left and right - mono, right? I saw a number of Audio effects in my copy of PPro CS6, but I don't see how. Probably very easy and I'm not going to hit my forehead... ?

  Thanks in advance for any help on this.

  On the effects tab, open Audio effects and you should see the left or right fill effects fill. It takes the left (or right) channel and puts it on the two outputs Earth R, ignoring the right channel in the file.

• Left channel stereo 700 p quit

  I hear is no longer the stereo of the left channel on my Treo 700 p.

  I use stereo headphones for Palm (two pair, these two don't) and PocketTunes Pro.

  Stereo was working fine, then one day only the right channel.

  On the phone, both work very well, only fails on stereo.

  I found a post of 2007 by Zarantha support Palm that a hard reset can solve a similar problem so I tried it... no chance.

  Suggestions please.

  There may be a problem with the microphone in the earpiece. Click on the following link for the post on the forum about this. Thanks to great contributor, DTfromBH.

  http://forums.Palm.com/Palm/board/message?board.ID=hardware&message.ID=31143&query.ID=113582#M31143

  For reference purposes, click the following link to the support page for your device on the kb.palm.com Web page.
  http://KB.Palm.com/SRVS/Nua/launchTab.asp?t=home&fn=Treo&MN=700p&CN=Verizon

  There are links on the page the user Troubleshooting Guide, how to, downloads, etc.

  Message relates to: Palm i705

• Camileo X 450 Audio only in the left channel

  Hi, I bought a Camileo X 400 that had a focus problem, so I have sen't back and Toshiba sent me a replacement unit, in this case a Camileo X 450.

  The problem is that he only record audio on the left channel.

  Is there a way to fix this?

  Best regards
  Paulo brine.

  Paulo of Halo

  All you can do is to check all the settings to see if something can be changed, but I don't think that there is something that you can about it.
  On my Toshiba Camileo H10 cam there is nothing where I can enable or disable an audio channel right or left.

  You have everything new and original box Camileo X 450?

• The two speakers play left audio channel only.

  OK, so I plugged speakers to my new computer configured with windows 7 and have had problems listening to a simple song. When I use the speakers (I tried several different sets) the two speakers appear to play only the audio in the left channel, and nothing don't play the channel right, which means missing out on a lot of songs or watch: (.) The speakers are plugged into the making of lime on the back of the computer, and this problem occurs with each pair of speakers I'm looking for. When I use my usb headset, the sound is perfect. When I go into the sound Manager, I can "set up" speakers, and when the small figure lights up to let you know that all law is supposed to be carillon, carillon of two speakers. Even with the left. When I go to the Realtek HD audio Manager and test it, each speaker lights up and plays on his own, just as it is supposed to. If I connect to my other computer via desktop remotely, the sound works perfectly, each speaker playing its own channel. It's just when I am playing a song on my desk that I have problems. Also the problem with good windows media player and vlc player. Any assistance in obtaining of drew it up would be appreciated. Thank you!

  Use a splitter to connect your speakers to the back of the tower.

  Pregnant how many channels is it?

  The drivers are up to date?

  Motherboard?

  Update the audio drivers of blogs of the manufacturer of the motherboard.

• Audio Adobe cs4 (mono single to double stereo)

  Hello

  How am I able to make a track mono single channel for the moment only play through the right speaker and make a twin (left and right) basically duplicating it.

  Thank you

  Baz

  Look at the Audio effects, fill left and right padding.

  Good luck and hope this helps (just had to do it for a project about an hour ago).

  Hunt

• Motu 8 pre distorted his left channel

  Hello

  I bought a MacBook Pro 2014 2, 2 GHz i7, 16 G memory vivid and connected my Motu 8 pre via FireWire-> love at first sight. When you use it with Logic Pro 10.2.4 is immediately created questions about my left channel. The noise on the right channel is good, but the sound on the left channel is really distorted with a high cry inside.

  Even if I play music via iTunes for example which is good and I start logic the left speaker (always play music from iTunes) is distorted with this small high inside.

  I saw something posted by MillerU812 and tried all of the suggestions, without success.

  Any help would be much appreciated!

  Have you tried the reset.

  Unplug the computer. Hold the Volume button in 5

  seconds. You must first see the light flashing clock, then the first LED

  for analog input 1 or 2, then you will see a "D". Turn the Volume knob to the right until the display shows "OK". Device is reset.

• Inspiron 3531 - audio headphones from left channel

  I have a new laptop of 3531 Inspiron, and I hear audio from the left channel when I plug in my headphones.  Here's the situation:

  -Audio works fine on the speakers.

  -When I plug my headphones all the way, I hear audio on the left earpiece.

  -With the headphones plugged in about 1/2, I hear from the right path. With the helmet on the connected 3/4, I hear the left channel with about 25 percent in volume and the right to 100%.

  -J' checked audio balance and volume is equal on both channels.

  -The headphones work fine on two other laptops.

  Whatever the above behavior if I use the drivers from Realtek installed at the factory, the latest drivers from Dell.com, or if I uninstall the drivers to use the Windows default ones.

  Any ideas?

  owrtq

  Whatever the above behavior if I use the drivers from Realtek installed at the factory, the latest drivers from Dell.com, or if I uninstall the drivers to use the Windows default ones.

  Hello. Normally, I would say that re - install the audio driver, but you have already done this, then contact support for repairs. If you prefer that fix, you have a 21 day period from the date of the invoice (if you got it from Dell). If you decide to return it, you can perform a system recovery. This is the real test to confirm the hardware failure.

• How to export 4 mono audio channel tracks separated?

  Hello! I need help as soon as possible...

  I am trying to export video files that have 4 separate mono (single) audio channels.

  I work with red RAW images, and I've synced sound that has four mono channels to separate. A boom, two lavaliers and zoom mic.

  Here is my solution up to now...

  When you create a new sequence I selects RED R3D 1080 p, then I click on TRACKS > Audio and select multichannel, number of channels - 4. Can I go ahead and synchronize the video and audio. When I go to export I'll AUDIO and select "Uncompressed" audio codec, and in configuring audio I select Mono - 4 channels.

  However, after export, I believe that the four channels are identical. I need channels to be separated, as the source (boom, LAV, zoom, etc.).

  Please advise on how to do it. I'm doing something wrong?

  Thank you!

  A couple of things to watch, make sure that the timeline tracks are top selected outputs correct and are correctly pans.

  

  Some export codecs will allow mono files separated, some don't. This gives you the opportunity:

  

• Export DNxHD with 8 channels audio multi... Problem! the final file only stereo all mixed with 6 empty strings.

  I export DNxHD with 8 channels audio multi... My problem is that the final file all mixed in the first 2 stereo channels with the channels empty rest 6.

  I'm lost on what could be the problem.

  The main audio channel is 8 channels... NO stereo.
  Export, I chose DNxHD and audio 48000 Hz with 8 output channels

  
  What could this be? I need to deliver a film with the 8 mono channels.

  Really appreciate all the thoughts/help!

  Thank you

  Christian

  That's how I would implement mixer in CS6's using a sequence of 8 track with 8 mono channels (mono channels using maintains levels matching, stereo and standard tracks can cause differences in level of 3db). Note the Red output channel selection and the panpot position indicated in blue.

  

• Sending Mono channels to stereo Bus with Pan

  I'm hearing CS6, Windows 7.   Session is made up of mono tracks to stereo.

  I want to send several of the mono tracks to stereo Bus with pan to apply reverb.

  The help PDF on Pg 127 says there is a part in the passage of the sends a track, but I did not.

  Right now I am working around routing the outputs of the railroad to a Bus, and then sending that bus to another bus, the related adjustments.

  He made additional büssing, and I would have send pan in the track as in the help manual.

  Anyone know how to activate the Pan in the Panel of the shipment?

  Thank you

  Len Bates

  

  If twirl you down the button "view envelopes on the track after controls introduced a bus and sent your way, you will find that you can configure the control pan as an envelope under the window, under"send 1 Output. "

• CC2015 pans all the mono left

  Hello

  Given that I upgraded first Pro CC2015 all my mono files in my sequences are bushed left. When I edit a new clip with mono audio in a default sequence also to pan the audio to the left. Stereo files are exhausted after okay (mid).

  Kind regards

  Patrick

  Hi Patrick,

  Given that I upgraded first Pro CC2015 all my mono files in my sequences are bushed left. When I edit a new clip with mono audio in a default sequence also to pan the audio to the left. Stereo files are exhausted after okay (mid).

  Kind regards

  Patrick

  Engineering:

  "This is as designed.  We have always applied a pan left mono clips clip slipped to an Adaptive track (so that the only channel will properly play out only the first layer of a sequence master stereo or multichannel). This unfortunately had broken in a 8.x versions and is now set at 9.0. »

  If it is a problem for you, let us know here: http://adobe.ly/ReportBug

  Thank you
  Kevin

• Mono .mov files change stereo (Canon 5 d Mark II).

  I recorded a bunch of video files with my 5 d mark II. They all have a good right channel, but one left empty channel (the mono microphone configuration) so I hear audio on one side.

  What I need is to fix these video files so that I can deliver to a person from editing so it can let go them on the files there already (since the Assembly is quite well done). So I can not just extract the audio and give him as distinct from WAV files or something, I need to insert the audio in MOV files. Some clips will have some removal of SSIH done as well.

  I know the first OK, but am really new to Soundbooth and Audition, and cannot find a way to make it work. I managed to get the Audition to a .mov file, but it downsampled 1080 p in 720 p making (and took forever).

  Any ideas anyone? Is there a FAQ or how-to, I'm missing?

  Thanks for any ideas or pointers,

  -greg.

  Greg,

  Is another editor using Premiere Pro as well, or something like FCP? Because 'fix' files in CS5 will not really work if the editing is done, even if you paste in CS5. Suggestion of David of remapping channels audio is a good, but you can do with clips that have already been used in a sequence, and it changes nothing on the source - only how files whose main elements are interpreted.

  If the other editor is using CS5, check out the Audio effects complete; There is a left "fill" and a version of "Fill right" that work with stereo audio. When used on a clip that is in place in a sequence, it copies the audio from one channel to another, essentially do what source channel remapping done after the fact. You can select all your clips in your sequence requiring this remapping and apply the effect to each of them at a time.

  Yet once, it will not work unless you work only in CS5. If I'm struggling to understand what you are trying to reach, please inform...

• Satellite A200 - 1JS PSAE6: only stereo sound using HDMI - why?

  Hello

  I have an A200-1JS (PSAE6) with a HDMI and HD DVD player.
  I connect my A200 to a LCD screen with an HDMI cable and its ok. Good picture and sound.

  BUT, when I want to see a movie (without using the HD DVD player) with a surround sound (5.1) the only thing that I get stereo sound coming out of the HDMI.
  I went to the control panel realtek option and in the HDMI output and I can only choose stereo.

  So my question is: its possible to get more audio channels (5.1) of the HDMI cable and if so, what should I do to play a movie with surround sound via HDMI?

  Best regards

  Pedro

  Hello

  As far as I know is not possible. HDMI cable offers transfer better video/audio signals to your TV and you can watch movies in best quality.

  For sound 5.1, you need port optical audio output, and according to the specifications of the laptop, this port is not available.

• Satellite A300 - can use only stereo receiver via HDMI

  I was wondering if someone could help me with my audio problems. I have a PSAGCC Satellite A300 - 06 h 019 current running Vista home premium 64 bit SO1, and I can't hang with my receiver. I have attached my computer to the receiver via the HDMI port, and only 2 channels (stereo) is available to be selected.

  I have the latest Realtek drivers, the radeon ATI drivers newer, but I can't select the surround speakers in the audio, stereo settings only. Is there some sort of registry patch or update or something that will allow me to select more than 2 channels of output through my HDMI? I have a very nice surround sound Setup and I want to maximize my value of entertainment.

  Also, when I go into the HDMI audio settings, there is a box to check, dolby digital and dts, when I test the dts and dolby digital, he spends in surround sound and plays test tones, but I can't get 5.1 or 7.1 speakers for watching movies.

  Thank you in advance if anyone can help me with this.

  Hello

  As far as I know, you can change the sound of digital output.
  In many cases, this option is not visible in sound options.

  To do this, go to control panel of-> sound-> the Read tab
  Here, you will need to right click and should mark the options see the disabled devices and show disconnected devices.
  Now you should see the option called Digitalaudio (HDMI) and this should be retained.

  But I m not very good if you get more options like stereo only