Retiming does not not on surround sources

Similar Questions

• After effects error: layer does not have a source. (26: 335)

  Hi all

  I'm on a Mac, and I'm just eager to replace the images by using the process of selection of the layer and then the Option by dragging the new images on the name of the layer. He has worked previously, but now in AE CS6, CC and CC 2014:

  1-if I have a shape layer, the new images moved causes an error "error effects: layer does not have a source." (26: 335) ("we see here: http://postimg.org/image/tyh38uuu5/).

  2. If I use a chart as the first layer and then replace it with another chart, it does not replace. He gets just added as a new layer.

  A lot of troubleshooting already... I've even went up to uninstall CC 2014 and then reinstall it, obviously without success. My Google-Fu can be low, I wasn't able to find a solution in this way. Any ideas are appreciated. Thanks in advance!

  See you soon!

  Benjamin

  Resolved:
  User error (me). It is not currently possible to replace a shape with images layer.
  I was confused a shape layer with a solid (after the use of camera tracking).

  As to #2, above:

  He now works using the keyboard shortcut: Cmd, Opt, /.
  I don't know why the button Option-do drag method does not work (the factory key Option everywhere else),.
  but I won't argue with success.

• After effects error: layer does not have a source.

  Hi all

  I add a text layer and then add my custom fill effect. Then I call AdvItemSuite1()-> PF_ForceRerender (in_data, & (params [0]-> u.ld)) of the CEAP for all layers. But only for the text layer, AE will appear a dialog box displays the following error message:

  After effects error: layer does not have a source.

  (26::335)

  Why is this happening? What other call can I use to render all the layers?

  Thank you and best regards,

  Dheeraj

  text layers is really a source (as opposed to solids which do).

  any source operation you will do an a text layer will give an error.

  It goes the same for shape layers.

• CC of InDesign, export ePub book, does not text paragraphs source anchor

  Hello

  In InDesign CC, I created a 25 chapter book and a table of contents in a separate chapter in the beginning. The table of contents are created as desired. Now I want to export this book to ePub and create a table of contents navigation in it. First of all, the drop-down list does not show my OCD saved-style, only the default. It only shows this TOC style when I export only the document "Table of contents".

  I check the box "Make anchors text in paragraphs in the source", but export ends with error messages "missing anchor text" and the TOC navigation shows the filenames instead of my chapter names.

  These beautiful export and create text anchors and TOC navigation functions only work when the whole book is in one document?

  I would appreciate an indication as to how I can get this to work.

  If you don't see your Style of table of contents in the drop down menu then the most likely reason is that you haven't synced all of your styles through the book.

  In particular, the document in the book referred to as the 'Source of the Style' is where we wait for the table of contents and metadata Style.

  In the Style of table of contents, you must check the option "Include book Documents -" then the anchors will be created through the book.

  Douglas Waterfall

  Architect, engineer of InDesign

• See connection to the server does not see any source

  Hello

  I have a very big problem, my opinion-connection to the server does not see any computer desk-source. I had seen some sources but not all a few hours ago. At this point, I did not see the sources I so did many trys to see this source. Overall I don't have luck, and now I see no source.

  The problems started with a VM Windows Server 2003 EE SP2, I need training to be deployed with a view. I have not seen this virtual machine, either I chosse linked clones or not.

  The journal of the events of this virtual machine show, auto login TP Server service not started right.

  I hope to have some ideas that will help me to solve this problem.

  Greetings

  You can use a server OS in a pool of Terminal Server services.  If you want to set up a desktop computer, you will need to use a desktop supported OS.   You can find operating systems supported in the Administrator's guide, http://www.vmware.com/pdf/view31_manual.pdf.

  If you have found this device or any other useful post please consider the use of buttons useful/correct to award points

• Why 42 Firefox does not display the source page

  When I choose to view the Source of the Page I get a message 'document has expired. It happened not in previous versions.

  Ah! view_source. Tab set to true. I put it to false, and the world returns to normal!

• IMPORT: imported pictures number does not match the source folder

  So I moved recently all my photos on a new portable hard drive.  On this, there is 3706 files (RAW, JPG and TIFF).  I have imported just them and import shows 3204, basically a difference of 500 photos.  Have you tried checking and unchecking suspected duplicates and a number of other things.  Everyone knows about this problem?  Suggestions?  Thank you!

  Could that be JPG files are not to be seen and or no distinct way to RAW image files. There is an option in LR preferences to treat JPGs as separate files. Check this option and see if you get now all images in the import dialog.

• Hi, after all stages of extraction of data from oracle to oracle during the execution of command "start extract ext1" his error giving the Manager does not work, can you please help me. Thank you

  Hi, after all stages of extraction of data from oracle to oracle during the execution of command "start extract ext1" his error giving this handler does not run both source and target, can you please help me. Thank you

  Hello

  The setting should be as below, and not only the port number should be...

  PORT 7809

  Kind regards

  Veera

• Converter does not see the disks in HP BL460c G6

  Hello

  I have a HP c3000 enclosure of blade with some blades BL460c G6 running Windows 2008 R2 which I would like to convert virtual machines.

  The problem is... in the settings page... among the 'data copy' tab... It does not show any source disks

  Can someone tell me please how to fix this?

  I am running the latest version of converter standalone (4.3)

  I've also attached a screenshot of the problem

  Thank you

  a guess:

  Try the conversion with UAC disabled. Maybe this prevents detect readers.

  Just to make sure, you use the local "Administrator" account or just a user with administrative rights?

  André

• FLVPlayback play button does not

  I'm new to Flash and AS3 and I'm trying to play my live stream, but my control of FLVPlayback I use the play button behaves like the people with reduced mobility.

  I did drag a FLVPlayback control on the scene and baptized.

  Here's the insterted in following code under "Layer 1":

  Import fl.video.FLVPlayback;

  sn: String var;

  trace ("stream name:" + this.loaderInfo.parameters.sn);

  SN = this.loaderInfo.parameters.sn;

  var flvPlayer:FLVPlayback = new FLVPlayback();

  flvPlayer.skin = "SkinOverPlayMute.swf";

  flvPlayer.isLive = true;

  flvPlayer.autoPlay = true;

  flvPlayer.source = "rtmp://xx.xx.xx.xx/test/" + sn;

  addChild (flvPlayer);

  Any ideas what I am doing wrong? Also I tested and so that 'sn' has a value, and it does.

  It seems that the playbutton does not work if it does not find any source, makes sense.

  So I looked at my code which is streaming on the server and I have a small application SWF (350px by 100px).  Well it seems that the dialog box does not appear if the flash application is small.  Once I extended my 350px by 200px flash application settings menu to allow access jumped upward and everything worked again.

• Warning of coherence - [39008] Table size not attached to Source fact

  I have a scheme in which I have the following tables:
  (A) fact Table patient Transaction (e.g., supplies used, procedures performed, etc..)
  (B) demographic Dimension table (houses info like patient location code)
  (C) location Dimension table (tells me what each location unique maps to the hospital)
  
  Is this table A and table B is a dimension table is attached to A table based on the ID of the Patient, so I can get general information about the patient. This would allow me to apply logic to see just patients transactions where the patient was FEMALE, or has been in the emergency room, by applying conditions to these fields in table B.
  
  Table C is a lookup table simple accompanied in table B of the Code of location, so I can identify the hospital emergency room where the patient was in for example.
  
  So the pattern is: has <-b <-C, where B and C are the two dimension tables.
  
  The query works the way you want, but my consistency check gives me the following WARNING:
  
  * [39008] logical dimension table D LOCATION MASTER has a source D LOCATION MASTER does not join any source.*
  
  How to fix this WARNING, or at least remove?

  Hello

  What you need to do is to add the dimension table to store (physical) to the source of the logic of the demographic dimension table, for example by dragging of the layer on top of picture logic source of demographic of MDB layer logical dimension table

  Kind regards
  Stijn

• 5.1 surround Sound speaker system does not work in Windows 7 Professional 64-bit edition

  My problem is about the same as other users who cannot get their surround sound speaker system to work properly in Windows 7.

  I have a subwoofer and 5 speakers (2 front, 2 rear, 1 for the centre).  Connection to the RealTek HD Audio embedded is simple, orange for the subwoofer, green for the front and black for the rear.

  Test the sound in Control Panel-> windows sound produces a sound on all channels and RealTek HD Audio Manager at the same time, which is the desired configuration.

  However, different applications use different channels.  IE and Firefox use the front channels, VLC/MediaPlayer uses the back.  3D games (that is to say WoW) through all channels.  In each case the subwoofer does not work.

  I tried to download the latest drivers on the motherboard (Gigabyte) manufacturers site.  I even tried the supplied RealTek drivers (even if on the Web from RealTek site which is NOT recommended).  I tried to connect the connectors of the subwoofer to the different takes (reversed black and green).

  I have experimented with the settings in RealTek HD Audio Manager and control panel-> windows Sound.  Nothing works.

  These exact same subwoofer and speakers worked perfectly well on Windows XP.

  I have 2 questions:

  one) has anyone resolved their 5.1 & Windows 7 problem something that I have not yet tried?

  (b) when will Microsoft take this issue seriously?  All Microsoft provided answers just repeat what everyone

  has already tried.

  First disconnect the cable 3 (orange, green and black) then click on Control Panel configuration-hardware and sound - Real tek HD audio manager - central tick, subwoofer and rear pair, front left and right and filling of speaker

  Then click on advance device settings.

  Select "perform front and reading of output devices back two different audio streams simultaneously" and give ok

  Plug all three pins one by one and select the appropriate option in the popup windows.

  That's all.

  You give enough information for me to get this working.   My system runs Win 7 X 64 Home Premium.   When I select 5.1 sound capacity side my 550 x Logitech speakers are not recognized.  If I select 7.1, which is the capacity of my chip Realtek chipset, I can get the two outside are activated as a "rear" speakers and can push the test tones to each of the four surrounding speakers and the combination of Center/bass via the Realtek driver.

  Regarding the "front and reading of output devices back two different audio streams at the same time" worries... I can't find this option.  There are at least two suppliers of 'control of the interfaces' assets on my system.  One is provided by RealTek, the other by Microsoft.  The access roads to these interfaces is roundabout and confusing, to say the least.

  Some compromises are in order in my humble OPINION.  I have my Pandora one stream play in an acceptable way in my small study.  Many of the source of sounds streamed to me are recorded in stereo or mono, I find myself hitting the 'matrix' on my Logitech X 550 button quite frequently.  Sometimes a more recent piece is delivered which actually looks Ok without the decoder "matrix".

  What I would really like to be able to do is to "reconfigure on the fly" between the built in speakers on my Acer Z3731 system USB bar ' All in One ' and my external Logitech X 550 popular with the ability for the presentation of "5.1 surround sound" through three sons.  When I try your procedure, I don't get separate recognition of each thread, as it is trendy and often end up with its 2.1 being eliminated in my 5.1 speakers, because somehow Microsoft has re-recognized the built-in USB port based his bar instead of the three rear wires plugged into the outlets provided by the manufacturer of the system.

  If there was ever separate 'Speakers' and 'Realtek' icons in the UI on my system, speakers are long gone and I can't get back them.  All I see is the Realtek driver.  I would like to see the two icons 'Speakers' different, I could mark "integrated 2.1" and "5.1 external '", in addition to the driver Realtek.»  How can I get these to reappear?

  Can anyone suggest a way to have two different sets of "speakers" recognized and identified in the Microsoft UI in addition to the Realtek driver?  If I could get because of this, I think that the driver would let me 'set as default' one or the other speaker set, and I 'software switching' capable of letting me choose the external speakers or integrated sound bar offers the sound.

• Change the source of entry with the Caps Lock key does not

  It should be possible to change the input source with the Caps Lock key on macOS Sierra.

  and I checked "Toggle ABC of input source with caps lock shift" in system preferences > keyboard > input Source.

  However, it does not lock shift still only works as long as CapsLock

  I tried to reboot, reset the keyboard shortcuts, deactivation of Siri, reset NVRAM and reset the SMC, but still does not.

  I use only the default input source and have not installed and related programs to the keyboard or input source.

  Can anyone help?

  Thanks in advance.

  Greetings slwsbl!

  Thank you for using communities of Apple Support.

  I see that you want to change the input source with the SHIFT key on macOS Sierra. I understand the importance of wanting to use a specific key when changing inputs. I'm happy to help you with this.

  It is possible to do. Please take a look at the User Guide helps Mac, specifically, this section:
  
  

  Switch between input sources

  To switch between input sources, do one of the following:

  • Use the menu entry: Click on the menu entry in the menu bar, and then choose the input source. If an input source is dimmed, the current application does not support it.

  • Use the Caps Lock key: Press the caps lock shift key to switch between a non-Latin input (such as the Chinese or Korean) source and an input source Latin (for example, French or English).

    To use this method, you must select the option "use Caps Lock to toggle to and from" in the stream of input methods. Choose the Apple menu > System Preferences, click keyboard, and then click input methods.

  • Use keyboard shortcuts: Press control-Option-space bar to select the source of the following entry in the menu entry, or control-space to select the previous input source.

  Best regards.

• Pavilion 500 - 206t: Boot Manager does not appear in the sources of boot UEFI

  I had a working system, until I installed Fedora on it...

  I have since removed Fedora, but cannot get the windows partition to start for the life of me.

  In the bios, I don't see "Microsoft boot manager" in the list of Sources of boot UEFI in the boot order.

  I have the original, untouched windows 7 x 64 partition, the HP recovery partition and 10 windows partition, I recently did a clean install, but still no start.

  I've deleted and recreated a 100 MB EFI partiton and a partion of 128 MB msr by using diskpart.

  formatted fat32 EFI, left the msr as-is.

  C:\Windows\Boot\EFI\ files on the EFI partition in \EFI\Windows\Boot

  Creates the via bcdedit boot manager entries.

  I tried:

  1. Bootrec /fixboot
  2. Bootrec /fixmbr
  3. Bootrec /rebuildbcd

  I also used boot bcd with uefi function to copy the files on

  I used an installation disc USB win10 to the foregoing as a win7 disc does not have the USB drivers for the keyboard and the mouse.

  Am I missing something for the HP Pavilion?

  Thanks in advance

  Repair of windows did nothing.

  I created a ultimatebootcd USB drive (http://www.ultimatebootcd.com/) and used parted Magic/clonezilla in order to image the old windows and partitions of hp recovery (not the entire disk) to a USB external HDD (plugged into USB 2.0 port)

  Then I deleted all partitions with parted magc.

  Install win 7 on the system with no partitions, it's easier to reduce windows on partition of 100 MB, but you can adjust it later, also don't you bother with the product key, ignore her.

  Restart the ultimate boot CD, choose parted Magic then Partition editor and create an important partition for windows = or superior to what it was when he was photographed. If your new installation of win 7 took the entire disk, simply to reduce the size of the partition and create the large partition to restore to, don't forget the restoration of 15 GB HP as well. If you don't see all the partitions or get an error in the score editor, see this link: http://ubuntuforums.org/showthread.php?t=1619381

  don't worry about formatting new partitions.

  To restore, you will need to rename the image files on the external hard disk created in the second paragraph above. The partition names will be changed, see this link: http://drbl.org/faq/fine-print.php?path=./2_System/102_restore_image_to_different_partition.faq#102_restore_image_to_different_partition.faq

  After the restoration, start windows installation disk and repair, it will be your old windows partition, restored. Save and reboot the old partition. If everything is successful, you can delete the newly installed partition win 7 and use msconfig in windows to delete startup entries. You can use parted magic to cultivate the restored partition, if you wish.

  Then, install windows 10 to get a true EFI boot.

• RT VI does not source distribution after reboot

  Here is a strange...

  I have a very complex application.  It runs great development environment.  It also runs great as a Starter (no GUI) rtexe.  When I build a source distribution and deploy a path of RT controller...

  VI Server invoke the method shows NO errors but the VI does not seem to be running. If I open a project, right-click on the target and click 'Connect', suddenly the invoke begins to work.  I think there must be a way to configure the settings of VI for the RT controller sur-boot server, but I don't know how it's done, or why I would not get an error before selecting the connection in a project.  Any ideas?

  Thank you

  XL600