More problems with Code signing

Similar Questions

• Problem with code signing

  Hi friends,

  I am facing problems by signing my code.

  The question:

  * My cod file is 169kb.

  * When I compile, jde generates only one .cod file everything for me.

  The steps that I followed:

  * I opened the .cod in a winrar and extract the .cod files three who were inside.

  * I opened the .csl file and typed "52525400 = RIM Runtime API" to get the signature RRT (as it is a 4.5 API)

  * I registered all of the .cod files.

  * I updated using the Updatejad.exe .jad file

  Now, when I installed OTA, I get the following error.

  Error at startup BugTracker: Module «BugTracker-2 "must be signed with the RIM DURATION Code Signing Key (RRT).»

  How should I proceed? I ve run out of options. Thank you

  Check out the cod file after the signing.

• [SOLVED] Problem with the signed key protected api

  Hey guys,.

  I already have a signed key registered with JDE 5.0.

  Just created my first app using the api protected and when I load them into the unit and try to run it, it says the app is attempting to use api protected and does not load.

  What I am doing wrong?

  OK, I just read this:

  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/8067/645045/8655/8656/127107...

  Send a code signing request to the administration of BlackBerry signature tool

  

  Solved!

• Problem with the signing key

  Hai guys I have problem with the key signature when signing request l click appears "impossible to ask for signatures until this application with all the necessary powers of signature. any body know this problem? I have send an email to [email protected] no answer not until now.

  * my windows is problem *.

  Thank you

  Well Yes send another.

• HP Officejet Pro 8600 more: problem with HP Officejet Pro 8600 more light

  As soon as I turn on my printer after some time one get a short flash printerscreen code: B84D7A4. Subsequently, I get the massage that I have to powerdown the printen and turning the power on again. This repeat hisself without end. If I disconnect the network cable from the printer starts normal. As soon as I connect the network cable, I get the same error code.

  If I connect to another network port, I have the same problem.

  Who knows the solution for this.

  I can still print via USB cable in. But I don't get the option to the printerscreen: SW update.

  Greetings @HPofficejetPro,

  I saw your post about the problems you are having and I can find some things that you can try.

  Have you tried another ethernet cable?

  The same thing happens when you connect with a USB cable?

  HP regularly publishes updates of firmware that can also correct the problem you are experiencing. With the USB cable is connected, you can click on this link to download the firmware update for the. HP Officejet Pro 8600 more e-All-in-One Printer - N911g.

  Is the printer connected directly to a wall outlet or a surge protector or a power bar? We want to connect it to a wall outlet so that we can eliminate the source of energy as the primary cause. See this document for more information on the problems when connected to an uninterruptible power supply/Strip/surge protector power (Note: this document is not limited to printers Laserjet.)

  Please let me know the results, or if there is anything else I can do to help.

  I look forward to hear from you!

  Thank you

• I have problems with my sign in password.

  This started about 6 months ago and has been getting worse and worse. Maybe it's my own fault. It now seems to me to be accused of being a person who tries to invade myself, and I can not restore a handshake with several sites that I have fun with. Like yahoo. Also, my email accounts get stupid.  Help!

  Hi Wilbur,

  Please contact the Microsoft Community. The problem you are experiencing is not very clear. It would be useful to explain the problem.

  Please answer the question-

  (1) where exactly are you trying to connect?

  (2) what happens when you try to connect?

  (3) do you mean to say that the sign in password is not accepted?

  If you forgot sign in password, then I would have you read the article-

  Microsoft's strategy concerning lost or forgotten passwords

  http://support.Microsoft.com/kb/189126

  Back to us for any issues related to Windows in the future. We will be happy to help you.

• Problem with code for exchange student CORINNE.

  My school has an agreement with Adobe for free software for students, I got my redemption code on my site of schools and activated, but once I signed up in the cloud, it didn't work... When I tried to enter after the signature it says that this code has already been used... Help, please.

  Hi Travis,

  Please see redemption code help

  Hope that helps!

  Kind regards

  Sheena

• Google Dev trends indicate CSS/JS problems with code generated in Muse... How to fix?

  A site developed by my team in Muse yields several issues related to the code seen in the developer utility Google Insights. I would like some tips on fixing these issues to improve the rendering speed. Would have thought that Muse would solve the problems instead of getting them. Has anyone here had similar experiences?

  I do not see the real issues, well, if you want to stick with muse, then 'fix' break them your site. Of course, all this could be optimized by manually editing the HTML and CSS code, but it's an entirely different matter. Can not have editing in the browser and other features without 'inflated' scripts, nesting structures and specific complex CSS rules... I wouldn't make too much of it. In the end loading, that page at all will take time, so what is the difference of speed of nano-second worry (imaginary) point?

  Mylenium

• Problem with code in tables

  Hi, first post... New DW cs4 user.

  I am trying to list a few items for sale on a Web site. The company that performs the processing of online payments generates a code for me to use to produce a button for buying... and there is the challenge.

  I'm putting the code in a table and its does not work. The code is a "payment button" generated by a payment company called Skipjack. If I place the code, say... on the bottom of the page it looks fine. But I need to go to a specific place on my Web page, the payment button. Please help... pay the boss awaits! Laughing out loud... Here is the page... http://www.ambitioncharters.com/packages.html ... the button is there, but I'm trying to put the different packages on the page... and then put the code for the price to the right of the product discrpition or under... I thought that a table would be way more "pretty" to achieve... but like I said, when I put the code, they give me the table... the code appears in the cell of the table instead of the button I need to go there... weird!

  Here's the code...

  <!-beginning of the "good ezPay command'-> code
  

  
  < input type = "hidden" name = "bonito" value = "D/inOUaqBqrBUe5T5fdgKs9zMySFmAjH21Kmx/TaWu0uAeseJidIoeVbnct7MtJyfdMz8NeGUuJgfeaSSe ZTq9UtbQLaXoQFowULZj41NgUFFbzT4cE1ApCJDP8RWU6pLPOEIuJeaDPQ4ia1OEzHRh7dR7PkyLkQyTmA9wrm2ULU HEKGtMpDU8fRvMx3DjnDBcP/0eDi5A8jkvcOt4/3qRCVUoTbNVqYaREzlzZoAnkQm8VLJI3JoU54wC8wTEewiKfXRr sTG5Bvv/XZmZHB3XXnng2Dn7nGZNkTz1rcJT1r5O4mM6 + oVYt3AnvP2jVi/l12 + oz + dAm UjyJneyJRstdu50eBHzv1E1Y + V9lptkBBS2xObmAF/urmWmGAtuc0ILByOKFe2Wg22zsuvMY2Tn3GBxe1sGC7d9uFl2gay3LePhfBG7 + gHvfSji SB6h5M0m76CWWjUHXikVxX2VKNtm3o + JAhSBE + AemfUWTrdwGcMZbljp7mBRGmiMOXz/2hc8MekCV/EdI9KDx1gt6C pw ==" / > "
  < input type = "hidden" name = "ezPay" value = "ZWyf7/x88PNVT9almNuR9MsthaKDhaRZ8QW3IiLIDk4 =" / > "
  < input type = "hidden" name = "creator" value = "44H7TtPK3SQ29yfCpHy5EA ==" / > "
  < input type = "submit" name = "Button" value = "PlaceDeposit" / >
  < / make >
  <!-end of "good ezPay command'-> code

  kylesalone wrote:

  Yes, it's true... the code, not the button, appears in the cell...

  I'll post the page with errors on it... now, as you can see, the formatting is quite climb... It's at least on my mozilla.

  All its supposed to be left indent... some is centered... and some of the 'deposit' buttons do not work.

  http://www.ambitioncharters.com/packages.html

  Suggest you read the code for the button one that works and then look at the code for those who are not. You will see the button that works is encapsulated in a form tag. This provides the necessary information as what is supposed to happen when the button is clicked.

  method https://vPOS.Skipjack.com/ezPay/Order.asp"="post">

  Not sure why two of the buttons are centering upwards and not left aligned... the code is a bit messy. If you insert your cursor to handcell that contains buttons and tables and go to the property inspector and choose horizontal align left in the menu drop which seems to do the trick.

  Its something to do with your styles css because if you detach all the buttons left alignment. And regarding the css well anyone who attached requiring many models to a page of shot in the nuts.

• Problem with code in Dreamweaver

  This is a new variant to a problem that I posted earlier tonight and the question and thanks to those who have been able to help so far.

  The test file online:

  http://www.troyrecreation.org/index09test.html

  When you look in the left column you will see some buttons, but under the buttons of the text with bullets which reads:

  A point

  Two point

  Three point... etc.

  I try to get it are buttons that look like buttons on this site with the code, I've inserted:

  http://CSS.maxdesign.com.au/Listamatic/vertical08.htm

  You will see the blue rollover buttons navigation on this page and the code below.

  Please visit my site if you can view the code and offer advice and solutions if you can please.

  Thanks again to all.

  Dan

  troyrecreation wrote:

  WHAT IT FIXED!

  Nadia, I send you a Christmas card.

  A box of chocolates would be better :-)

  I know it's simple CSS and code at all, but for me it's new and I'm learning.

  Do you understand the difference between the original code of antidetect and the new that you pasted?

  Look at the CSS, you will see the styling for the navcontainer div and then the actual list style that create the appearance of the menu button.

  This is why you must surround the list with a new div and give it the ID created in the style sheet.

  If you take it in easy steps you will be very well - we all had to start somewhere :-)

  Thanks for your help.

  You're welcome :-)

• more problems with upgrade dang

  I have also problems even though mine seems a little different to what he says my updates have been installed successfully, but every time I shut my computer down it starts to install again. So far...
  A security update for Microsoft XML Core Services 4.0 Service Pack 2 for x 64 - systems (KB954430) it is installed four 4 times. Twice on 27/04/2009 and twice on 29/04/2009. Ah yes and once again with the same number, but not that of the base-64 sys.

  And... Updated security update for Microsoft XML Core Services 4.0 Service Pack 2 (KB936181) installed 10 on 29/04/2009 (Yes 10) times and 2 times on 04/28/2009. Who knows how many others before the time above. They say all installed successfully. I am freakin out. Someone, someone HELP! And the update is already waiting for me once again downstairs. Do I have to uninstall all but 1 of each and then turn off all security before reinstalling?

  Hi David,

  Thanks for your help. I wanted to let you know that I was looking around and found on Microsoft net technology literally tons of people who have had this problem and it was a much easier difficulty for her I would share in case it can help someone else.  It's...

  "Okay, I have a fix for the problem of Vista this problem.
  Go to start > settings > Control Panel and select programs and features. Then, uninstall all of the titles related to Microsoft XML core services (they are clearly identified)
  Then close everything down on the desk and do a search for updates and you should get the normal 1 XML Core Services 4.0 update. This unstall and it should fix the problem. »
   
  I just cut and pasted what they wrote, but it worked. Just to be a little clearer for some of you I didn't myself you must uninstall it in the program section not the update section.  And it fixed the problem (so far). I really appreciate that you took the time to help me with David and if I can help someone else with this fix, then I am so glad it was a royal pain the the bo-hiney!

• Need help with code signing.

  Hello

  I did an application that requires a code signature because I use the function 'Automatic Execution at startup' (this is what I was told).  I use not all restricted classes.

  So, I asked for a key to the RIM and received.

  I have received only a single file named "customer-CPR-# .csi" (the e-mail talked about three files however: RBB, CPR, RRT).  Nevertheless, I followed the instructions and managed to install this .csi without error (I received a confirmation e-mail).

  Now, I want to sign my code...

  I tried using "build - request Signatures ' in my Blackberry JDE and this displayed:

  javaw.exe - jar "C:\Program research in Motion\BlackBerry JDE 4.2.1\bin\SignatureTool.jar" f d "C:\Documents and Settings\johndoe\Local Settings\Temp\RIMSigTool65120.tmp"

  However, nothing happens (this jar file is there though).

  I looked beyond and found a 'Signature tool' under "Component of the Blackberry JDE 4.2.1 Package" in the "Programs" menu

  When I run this, I get invited to one. COD file.  I select my and then I see a window that shows six times my. File of COD that says that my COD file does not require a signature.

  Also, looking around this forum, I have seen some people saying a. CSL file is necessary... but I do not have this file in my project directory.

  So to make a long story short, I'm a bit confused on what do I do next for my application run at startup on the Blackberry.  How should I sign it?

  Thanks for your help!

  Please ensure that you have a current project, when you select apply Signatures from the Build menu.  The only assets of signs SignatureTool projects, so if no project is active, nothing will happen.

• Problem of code signing?

  I signed the modules involved in the API:s resitricted access. running the application works for functions as runtime storage, persistent storage, world events, make calls

  When you run this code:

  -------------------------------

  private void killCall (int callid)
  //++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
  + Kill outgoing call
  //++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
  {
  try {}
  CreateAlert (parameters. Debug, "KillCall 1");
  EventInjector.KeyCodeEvent pressEndKey = new EventInjector.KeyCodeEvent)
  KeyCodeEvent.KEY_DOWN, Keypad.KEY_END, KeypadListener.STATUS_NOT_FROM_KEYPAD (char));
  CreateAlert (parameters. Debug, "KillCall 2");
  EventInjector.KeyCodeEvent releaseEndKey = new EventInjector.KeyCodeEvent)
  KeyCodeEvent.KEY_UP, Keypad.KEY_END, KeypadListener.STATUS_NOT_FROM_KEYPAD (char));
  CreateAlert (parameters. Debug, ' KillCall 3 ');
  Thread.Sleep (500);                       May need to wait DTMFTones finish
  CreateAlert (parameters. Debug, "KillCall 4");
  EventInjector.invokeEvent (pressEndKey);
  CreateAlert (parameters. Debug, "KillCall 5");
  Thread.Sleep (250);
  CreateAlert (parameters. Debug, "KillCall 6");
  EventInjector.invokeEvent (releaseEndKey);
  CreateAlert (parameters. Debug, "7 KillCall");
  Thread.Sleep (250);
  CreateAlert (parameters. Debug, "KillCall 8");
  EventInjector.invokeEvent (pressEndKey);
  CreateAlert (parameters. Debug, "KillCall 9");
  Thread.Sleep (250);
  CreateAlert (parameters. Debug, "KillCall 10");
  EventInjector.invokeEvent (releaseEndKey);
  CreateAlert (parameters. Debug, "KillCall 11");
  Thread.Sleep (250);
  CreateAlert (parameters. Debug, "KillCall 12");
  CreateAlert (parameters. Debug, 'Call killed!');
  CreateAlert (parameters. Debug, "KillCall 13");
  }
  catch (Exception ex)
  {
  CreateAlert (parameters. Error, "Could kill not call" + ex.getMessage ());
  }
  }

  ---------------------------------------

  I get an exception thrown after

  CreateAlert (parameters. Debug, "KillCall 4");

  This happens only on a device real and if I put "enable device security" in Blackberry JDE

  The only information printed by:

  CreateAlert (parameters. Error, "Could kill not call" + ex.getMessage ());

  is "could not kill call null.

  Disable the security system and everything works fine

  BlackBerry JDE 4.6

  Simulator of 9000-TMobileEU - 4.6.0.92

  You need to change your application permissions in order to activate "Injection of strike."

  I also can't ex.getMessage () but you can at least get exception type as follows.

  CreateAlert (parameters. Error, "Could kill not call" + ex.getClass () .getName ());

• Problem with cod-file

  Hello

  Just know I want to sign my cod file and run the signature tool in my eclipse, there I found 119 cod-files. They are all mentioned as projectname.cod till projectname - 118.cod.

  Can someone explain whence these cod-files? I did something wrong?

  Best regards

  Cod files are allowed to have 64 KB for the code and 64 KB for resources.  If your project is larger than that, it is split and zipped a cod file.  Eclipse also, lists your cod for each API file that requires the signature (for example you will see a separate list for RBB, CPR and RRT)

• More problems with BSOD? Need help!

  So I already made a thread on the BSOD and thought that I had solved the problem. But, I've got 2 blue screens tonight. One was "IRQL_NOT_LESS_OR_EQUAL" and the fault was of ntoskrnl.exe84d5b and the other ntoskrnl.exef20d4.  I have downloaded on my SkyDrive (https://skydrive.live.com/redir?resid=5051AC31078E096A%21149), mini dump files if someone could read the files and give their opinion on what could be the cause of it, I would really appreciate it.

  I think it might be my motherboard some how, it has been with me all the time that since the BSOD. I changed almost every component.
  Someone suggested that it could be a memory error, but it's unreleased memory, I tried in another machine of friends and there not once BSOD. I bought a new graphics card, thinking that they were the cause of the BSOD but it was very good. I also bought an SSD of 335 Intel, which is quite good in other platforms. Only other thing left for material is motherboard, what could be her.
  Thank you very much.

  Anne

  These related to the nvlddmkm.sys nVidia Display Driver.  There is a known issue with this driver (December 2013).  I would come back to a previous driver (6 months old) at least until they release a new driver with less bugs.

  Also of note, you still have the remnants of Symantec, which is known to be problematic and Kaspersky (also problematic).  If updating the video driver solves the problem I delete both and replace it with MSE.

  Do not forget to disable the Auditor by typing auditor/Reset