more than 8600 double sided printing

Similar Questions

• OfficeJet pro 8600 double sided printing smudges

  I try to print paper double-sided on 200gsm (color) on our new printer 8600 & apparently smudge or smear the first page at the end.

  When it prints the first page & begins to push out of the printer (where it is said that its drying) before pulling back in print on the other side, it comes out ok, but when printing is complete, it has black ink stained all over the front page.  The back of the back page looks perfect.

  Hey dinkidi,.

  What are the parameters of paper what do you use in the driver when executing this print job? (E.g., type of plain paper and best quality printing letter size)

  Have you tried to remove the filter to switch at the rear of the 8600 and wipe the rollers back in the printer with a soft, lint slightly damp with water?  In addition, try to wipe the rollers of the Ferris wheel inside the duplex unit.  It is possible that a small amount of ink rubbed off on the rollers of the printer.

  Also, please take a look at the information in the document found here.

  Let me know how it goes,

  Jason

• OfficeJet pro 8600: double-sided printing has stopped working

  I recently had to restore my RT Windows 8.1 running Surface.    Before that my printer was working fine.  After, I had a problem with documents stuck in print (QC) I finally corrected which but now my documents will not be 2 sided.  No matter how many times I select two sides printing in the print dialog box, it will not do it.

  When I go to the properties of the drivers it says duplex printing is not installed.  I don't know how to enable this option.  I've uninstalled and reinstalled the driver several times.  Well Finally, who sets the printer problem, it did not solve duplex printing.

  Any help would be appreciated.

  Hello

  In the Control Panel select devices and printers.

  Right click on the printer icon 8600 and select printer properties.

  Open the device settings tab and set as installed two-sided printing accessory.

  Confirm the changes and two-sided printing becomes available.

  For any questions, access the control panel can help the following video:

• OfficeJet Pro 8600 Plus: Officejet Pro more than 8600 - cannot install printer on Windows 10

  I have upgraded from Windows 7 to Windows 10 and CANNOT install the printer.

  After the upgrade, the HP software prompted me to reconnect to the printer.  I chose for a wireless connection.

  The process hangs / locks the screen shown on the picture below.  I have tried just about EVERY related solutions posted in the community and have come-up-small.

  Did anyone else out there having the same problem?

  

  hjs_19... Thanks much for the reply.

  I was finally able to solve the problem using 'Reset this PC' in Windows 10 - see pictures below.

  My system has been corrupted somehow.  I don't know what was the cause, but the system works better than ever now (Lenovo T430 8 MB of RAM).  The process of 'Reset this PC' purged MANY foreigners "tricks" of the machine.

  

  

• Officepro jet 8600: double-sided printing

  What I really wanted to say, is that it is the function copy/zeroxing biased, I can't seem to get.

  To add more, once the setting of the option as Original 1 sided: one copy, you can type set as the new default value in the same menu and confirm to set 1 back copy as default for future copy jobs.

• On a Pro 8600, how can I switch between the simple side and double-sided printing?

  I looked at the response to the more than 8600 pro, but when I go to print-preference-advance, I don't see the option of switching between duplex and single-sided.

  In the set printing preferences 'print both sides' votes to zero.

  

• duplex printing on jet office pro more than 8600

  just bought officjet 8600 pro-ok all set up - I'm a mac user running the most recent version 10.9.3.

  Don't always work out the default settings to double-sided printing (mainly from Mac office word, but all the really).

  Hi brownies55,

  Thank you for visiting the Forums from the HP Support! I see that you are not able to set a default value predefined for double-sided printing when you use your HP Officejet Pro 8600 more with your Mac OS 10.9.

  I would like that you start here: changing the parameters of printing from Mac OS X, once here that will guide you through to change the print settings and also show you how to save your new settings as a preset.

  Make sure that you select the option for the OS X 10.7 and 10.8, they will be the same steps for the Mavericks 10.9 OS.

  I hope this helps!

• OfficeJet Pro 8600 Plus: double-sided printing HP8600 has stopped working

  My HP8600 911 g printer double-sided printing has stopped working. Duplex accessory is still in place. Forum told to go into system preferences, open print queue and click on the driver tab. There is no driver tab. Just, it displays 'Driver 2.0' and does not give me the option to change this.  Don't know why? Duplex to work properly and now it doesn't. Any help would be greatly appreciated. Thank you!

  Hello

  I guess you can use AirPrint driver seeing your description.

  If please, try to add the printers printer & scanner, this time, click the use drop down and select the model of the printer default AirPrint option instead.

  Now check these settings and try to print a double-sided work again.

  Shlomi

• 8600 CN579A more: more than 8600 does not work with Windows 10

  HP has plans to support the more than 8600 on Windows 10, or they will offer a discount on a replacement printer?

  Yes, it works very well.

• HP Envy 4500: Double-sided printing

  I've had my printer for about two months now, and at the beginning I had no problem with printing. I was thrilled that the printer has the ability to duplex printing to save paper, but all of a sudden my printer is more two-sided printing even if the "meetings" are checked in the print menu that appears before printing. I would go to the bottom of this, because I prefer to take advantage of the features of the printer and save paper. Please let me know what I am doing wrong and advice to solve this problem, thank you!

  Collected has nothing to do with the double-sided, this means that when you print 3 copies of a document that is five pages long, it will print pages 1 to 5 three times instead of print page 1 three times and then page 2 three times and so on. Double-sided printing can be enacted in one of two ways. Either you select double-sided as an option when you go to print a print job, or you set the driver to duplex by default values. According to the printer model, you can also apply duplexing by telling the duplex printer all. It is model specific and you do not specify the pattern here, so I can't give you the exact details.

• oficejet 6700 premium: HP Officejet 6700 Premium WIN 7 - double-sided print - back comes out backwards

  HP Officejet 6700 Premium - os Win 7 - double sided printing - back comes out backwards. I TRIED TO DOUBLE-SIDE PRINTING, BOOKLET PRINTING, AND PRINTING GREETING CARDS. ALL OUT UPSIDE DOWN AND ALSO very small PRINT ON ONE SIDE OF THE PAPER HALF. HOW TO SET THE PRINTER SETTINGS BY DEFAULT OR CHANGE WHAT IS PAST?   Oh it then, I'm not yelling, just noticed the hats were on.

  Jay B.

  Hi @Jayburn,

  Welcome to the HP Forums!

  I noticed that the back comes out on top down, when duplex printing with your HP Officejet 6700 Premium, Windows 7. I am pleased to see that for you!

  Please, take a look through this guide, print on both sides of the paper (duplex printing) for HP Officejet Premium 6700 e-all-in-one printer (H711). Follow the instructions for Windows.

  Guidelines General double-sided printing

  Do not print on both sides of the following types of paper, or paper jams may occur:

  • Transparencies
  • Envelopes
  • Photo paper
  • Glossy paper
  • Paper lighter than 60 g/m2 (16 lb).
  • Heavier than 105 g/m2 (28 lb) paper.

  Several kinds of paper require a specific orientation when you print on both sides of a sheet. It's letterhead, preprinted paper and paper with watermarks and pre-perfores holes. The printer will print the first side of the first book. Load the paper with the top edge first and the side to be printed facing downwards.

  I hope this helps!

  "Please click the Thumbs up icon below to thank me for having responded."

• Win Pro 8, double-sided printing is not taken in charge for inkjet 1200 D

  Dig into this forum and google I couldn't find any solution for my problem of duplex printing.
  What is the problem? Even though I have a HP Business Inkjet 1200D the driver support in Windows 8 Pro is not a double-sided printing option (other than manual... but why did you buy the 1200D for ;-)))

  Found this solution for Vista
  http://h30434.www3.HP.com/T5/printer-all-in-one-software-drivers-e-g-Windows-8/Vista-duplex-solution...
  And it works see the response from a large number

  It would also work under Windows 8 Pro?

  Vista is also x 64 or am I missing things crusial?

  Hello

  Business Inkjet 1200 allow automatic duplex printing, it is disabled by default and must be enabled:

  Right-click the 1200 printer icon, then select printer properties.
  Open the device settings tab.
  As installed in Duplex Automatic Two-Sided accessory and then click OK to save the change.

  Automatic duplex printing should now available in the final by choosing to use the auto-recto-sided unittab.

  Kind regards
  Shlomi

• more than 8600 doesn't turn on!

  We have recently bought a HP officejet pro more than 8600 and managed to make it work. After that, we had a few problems with the connection of computers to the printer for printing - the printer is not found. Now after switching off, it does not turn. It shows the HP logo and does nothing no matter how long wait for us. It had been extinguished before without encountering this problem and not the touch screen or the power button had no effect. After you have disconnected and reconnected the printer, the problem continues to persist.
   
  Just before this happened, it seemed to be completely disconnected from the network in our House, and the network on the Printer Wizard program not could find wireless access to all points. That's why I decided to restart the printer.
   
  It has not been damaged in any way and is plugged into a surge protector so there is no possibility of damage caused by the tides.
  Any help would be appreciated! We spent a lot of money on that and are really disappointed that we get this problem.

  Thanks a lot for the update!

• HP officejet pro 8610: double sided printing - brochure

  I'm trying to print a booklet from a pdf file.  When I print double sided printing pages in reverse.  Front of the faces of the page to the top and back of the page down.

  How can I get to printing, so that I can form a booklet?

  Hi @roza,

  I'd love to help you with your duplex settings. Looks like you will need to change the short edge binding on the long edge. I found something that might help with these settings: with long edges and parameters of short edge duplex printing.

  I hope this helps.

• HP Office Jet pro 6830: HP 6830. Somehow changed my settings double sided printing. I need to go back to unique sid

  I need to change the next simple setting for double-sided printing.

  The default print settings can be changed as follows: click Start, devices and printers.  Right-click on the Officejet 6830, select Printing Preferences.  Select the preferences you want, apply, OK.  This will change the default settings.  Note that some programs to keep their own values by printing defect and will need to be changed in the program.