More then 10 to an array of integers

Similar Questions

• How to get an array of integers to user in the User Interface

  Hi all. I'm not a very experienced user of the CVI. I have almost exclusively coding in LabVIEW but have a client who wants all of their work in the CVI.

  I've been very fruitful so far (set up a Modbus API from scratch that supports all types of connection) but am confused on how I can get the integer multiples of the user without limiting the number of integers I can get. Essentially, I need to be able to get an array of integers to the user.

  General information, I am building a user interface to test my Modbus API. There are Modbus functions to 'Write multiple registers' and 'write multiple coils. I want the user to be able to enter all the values they want to write in one command.

  What is the best way to get an array of integers through the user interface?

  The easiest way is probably to allow user input in a textbox control numbers: items can be separated by spaces, commas, or even a line break (using ctrl + Enter). You will then need to extract the string from the TextBox and analyzed for numeric values using any non-digit character as a separator: strspn (string, '0123456789'); can be used for this.

  More complex, another possibility is to use a table control to receive user input: you Dresses an empty table with a reasonable number of roews, or you need some codes to add new lines as long as the user fills all those already existing. On the other hand, it will be easier since data recovery in a simple statement, you will all return values: GetTableCellRangeVals (panelHandle, PANEL_TABLE, VAL_TABLE_COLUMN_RANGE (1), table, VAL_COLUMN_MAJOR);

• Array of integers with array of bool

  I have an array of integers large read in a worksheet. All ones and zeros.

  The table is 200 000 length and width 10-bit words. I need to convert to an array of Boolean in order to

  create a chart of digital waveforms. I can convert it using loops, but it will take more than an hour.

  Is there a quick way to convert an array of 200 000 x 10 of integers (ints) to an array of bool?

  This should be much faster than the curls.  I was not looking for it with a great picture.

  Lynn

  

• Converting a string to an array of integers (ints)

  I need to do ot an app that will read in numbers, or data means, in a text file on an SD card and then convert them in a line graph. Currently I am able to read the contents of a text file and store it as a string with this code

   private String readTextFile(String fName) {
          String result = null;
          FileConnection fconn = null;
          DataInputStream is = null;
          try {
            fconn = (FileConnection) Connector.open(fName, Connector.READ);
            is = fconn.openDataInputStream();
            byte[] data = IOUtilities.streamToBytes(is);
            result = new String(data);
          } catch (IOException e) {
            System.out.println(e.getMessage());
          } finally {
            try {
             if (null != is)
  
              is.close();
             if (null != fconn)
              fconn.close();
            } catch (IOException e) {
             System.out.println(e.getMessage());
            }
          }
          return result;
          }
  

  I am able to print the result of the chain of my test file so it prints something like "1 2 3 12 14 2 42.

  What I want to do convert this string to an array of int that will look like int [] result = {1, 2, 3, 12, 14, 2, 42}.

  I tried to use string.split("") as this seems to be what is generally done when I have the problem of google. When I try this however I get an error "the split (String) method is not defined for the String type.

  I just want to know if there is a way to convert this string to an array of integers (ints), or maybe is it possible to change my readTextFile method so that it will display the data in a table or working with the array of bytes to get distinct integers.

  Hi try this

• I want to store movies and downloaded music from iTunes on my seagate more, then read on my iPad. I can do this. Thank you.

  I want to store music and movies downloaded from iTunes, on my seagate more, then watch them on my iPad. I can do this and if so, how? Thank you.

  Is - this Seagate drive one that uses a local WiFi access point built in?

• -10H - Portege Z830 can't get more then 4 hours of battery life

  I just bought my Portege Z830 last week. Although, in all reviews, I read that I have seen that autonomy is 7 to 8 hours, even when you run multiple applications my laptop battery does not last more, then 3-4 hours.

  Its a new laptop and I cannot understand the huge difference in the life of the battery read in the comments with my own.

  Even when including the brightness to 30% in eco mode and very few applications running, I can't 4 then more autonomy.

  Can someone please advise.

  Thank you!!

  Calibrate you the battery at the beginning?
  The battery should be charged and discharged until it is completely empty!
  This should be repeated 3-4 times in the line!

• Problem more then 16 output waveforms

  Hello, I made a program to 30 waveforms output, but when I try more then 16 output signals, the program show the internal software error error occurred in the MIO software. Please contact the support of National Instruments. I use two NI 9264.

  Please help me
  Thanks for the support

  What cDAQ chassis do you use?  The cDAQ-9172 supports only 16 hardware channels timed, but the other cDAQ chassis do not have a limit unless you perform an on-board regeneration which you are not.

  What DAQmx version you have installed?

  You should never get this internal software error is a problem with DAQmx.  I don't have two 9264 s in my office at the very, but I can try again later to see whence the error.

• Then use disk defragment, can you defrag more then one drive at a time.

  Then use disk defragment, can you defrag more then one drive at a time.

  The defragmentation occurs for all hard drives connected only.

  You can open Disk Defragmenter, to start defragmentation. When the process is happening on a particular partition, you can stop it and she will continue with the next partition.
  But the process cannot operate in parallel; He will perform a defrag each only.

• SetCurrentRowWithValue more then a key attribute

  Hi Experts,

  Jdev 11.1.1.7.0

  I based EO VO with the attributes of key more then 1. How to use SetCurrentRowWithValue for more then 1 key attribute.

  Or is there another approach to filter records and display it on another page.

  Scenario:

  Page 1 - fragment

  List of records in the table when the user clicks on the line, he must navigate to the next page and display the selected line.

  Page 2 - fragment

  Form displays the selected line

  Note: I have more then a key attribute, is there a declarative way as SetCurrentRowWithValue?

  Thank you

  Nitesh

  The setcurrentRowWithKey also works with multi part keys. In this case, you need to set several parameters (key parts). Watch Java ADF Webcenter UCM SOA Weblogic: SetCurrentRowWithKey and SetCurrentRowWithValue which shows this process for a key part of and Technologies of Oracle Fusion Middleware: ADF 11 G: setCurrentRowWithKey Vs SetCurrentRowWithValue the difference of the two methods.

  Timo

• I want to try adobe lightroom cc that over 30 days adode can give me more then 15 days or not befor I buy

  I want to try adobe lightroom cc that over 30 days adode can give me more then 15 days or not befor I buy

  Please see: software Adobe to trial has expired at the beginning

• creating more then a tabular form in the apex of the magician

  Hi all
  I am unable to create more then one table in a page form... don't we have another way to do... ?
  a solution may be greatly apprecieted.
  Concerning
  Vishal Roy

  Hi Vishal,

  You can have only one tabular form on a page. However, there are several threads associated with this topic, which you may find useful to consider. Some users have posted to their workarounds, so it would be interesting to search the forum for such offers. To start:

  How to have several forms of table on one page
  Multiple tabular forms with updates on the same page
  Re: why not 2 tabular forms on the same page?
  Multiple tabular forms
  2 tables form MRU/MRDing in the same table

  Kind regards
  Hilary

• Apex 4 and more then a SQL query on a page update

  We know if 4 Apex has eliminated the restriction more then an update SQL query on a page?

  If you mean tabular forms, you can have one per page.

  -Sharon

• is it possible to have validations apply to more then one button?

  is it possible to have validations apply to more then one button? If it isn't... I would copy about 10 validations and present them to a second button (if I could be bothered)...

  Rather than use a button using conditional processing and PL/SQL Expressions

  :REQUEST IN ('SAVE', 'CREATE')
  

  where these requests are names of your buttons.

  Denes Kubicek
  -------------------------------------------------------------------
  http://deneskubicek.blogspot.com/
  http://www.Opal-consulting.de/training
  http://Apex.Oracle.com/pls/OTN/f?p=31517:1
  -------------------------------------------------------------------

• Remove numbers first in an array of integers 2D

  Hello

  I created a program that generates numbers said pitchblende probably the first: these are integers, which are almost always of the first: I would like to keep only those that are not the first (they are said to pseudo-premier-first-strong).

  Here is the part of the program that is supposed to remove these Premiers of my 2D integer array numbers:

  

  As you can the utiiese by running the program as an attachment, I have a sub VI which is a Boolean function that returns true if a number is Prime Minister, and false otherwise ('Nb Prime Minister' on the diagram). I don't understand why this part of code has no effect. The first column of my table consists of integers (the of I call this 'base').

  I add the two subprogrammes Québec pluggable attachments, in case (but I don't have a problem with them).

  Could you point me to a safe method pour delete numbers first in a Board of 2D integers?

  Thank you very much in advance!

  Two remarks without taking the time to look at your code in detail:

  1. A 2D table must include the same number of lines in each column. You treat the 2D column-by-column table to remove the primes of each of them. Since the number of "items to remove can be different from one column to the other, this method is not recommended. LabVIEW will take into account the column with the most number and complement the other with 0. In your case, par chance, the result may be acceptable, but please understand that this is a bit lame.
  2. If the number is Prime Minister, it is removed from the current column. Therefore reduces the size of the column and the numbers following the coming to be erased so shift forward. This means that the next iteration of the inner loop, the table (column), passed by a shift register, will not BE the same. Or you don't take no account of this using the counter (i) iteration of the loop without correcting it every time a prime number has been removed. The next number one who comes to be deleted so escape analysis.

  I'll think about how to fix your code.

  PS: The Subvi checking the rule of the number includes a stacked sequence and useless local variables and making the code reading, more difficult.

• How to make the tank table in the array of integers

  Hello

  If I give the input array unsigned char as a [] = {12, 45, 89, 00, 45, 12, 67, 12};

  I want to exit as follows in the table int unsined [b] = {12458900, 45126712};

  Thanks in advance,

  Kind regards

  Harish. G.

  Hi Harish,

  in your first thread you want to create arrays of bytes larger integers BCD, and now you have to return the same way?

  The bases were shown to you: you had to change some simple calculations!

  

  You should really have stuck to your first thread...