Problem more then 16 output waveforms

Similar Questions

• I want to store movies and downloaded music from iTunes on my seagate more, then read on my iPad. I can do this. Thank you.

  I want to store music and movies downloaded from iTunes, on my seagate more, then watch them on my iPad. I can do this and if so, how? Thank you.

  Is - this Seagate drive one that uses a local WiFi access point built in?

• -10H - Portege Z830 can't get more then 4 hours of battery life

  I just bought my Portege Z830 last week. Although, in all reviews, I read that I have seen that autonomy is 7 to 8 hours, even when you run multiple applications my laptop battery does not last more, then 3-4 hours.

  Its a new laptop and I cannot understand the huge difference in the life of the battery read in the comments with my own.

  Even when including the brightness to 30% in eco mode and very few applications running, I can't 4 then more autonomy.

  Can someone please advise.

  Thank you!!

  Calibrate you the battery at the beginning?
  The battery should be charged and discharged until it is completely empty!
  This should be repeated 3-4 times in the line!

• Apple stop updates iOS 9.3 for older iDevices due to activation server locking problems more and more.

  Latest news of Apple posted, incredibly, ELSEWHERE other than on Apple own site Web/community technical forums.

  Apparently Apple has stopped now updates iOS 9.3 for older iDevices due to activation server locking problems more and more.

  http://www.IMore.com/Apple-working-iOS-93-fix-older-iPhone-iPad

  Someone just posted in another thread that it may be active again. I can't check it, because they haven't posted a link about her being active again, and I've already updated all my devices, I can't be sure. Maybe something to watch.

• Then use disk defragment, can you defrag more then one drive at a time.

  Then use disk defragment, can you defrag more then one drive at a time.

  The defragmentation occurs for all hard drives connected only.

  You can open Disk Defragmenter, to start defragmentation. When the process is happening on a particular partition, you can stop it and she will continue with the next partition.
  But the process cannot operate in parallel; He will perform a defrag each only.

• SetCurrentRowWithValue more then a key attribute

  Hi Experts,

  Jdev 11.1.1.7.0

  I based EO VO with the attributes of key more then 1. How to use SetCurrentRowWithValue for more then 1 key attribute.

  Or is there another approach to filter records and display it on another page.

  Scenario:

  Page 1 - fragment

  List of records in the table when the user clicks on the line, he must navigate to the next page and display the selected line.

  Page 2 - fragment

  Form displays the selected line

  Note: I have more then a key attribute, is there a declarative way as SetCurrentRowWithValue?

  Thank you

  Nitesh

  The setcurrentRowWithKey also works with multi part keys. In this case, you need to set several parameters (key parts). Watch Java ADF Webcenter UCM SOA Weblogic: SetCurrentRowWithKey and SetCurrentRowWithValue which shows this process for a key part of and Technologies of Oracle Fusion Middleware: ADF 11 G: setCurrentRowWithKey Vs SetCurrentRowWithValue the difference of the two methods.

  Timo

• I want to try adobe lightroom cc that over 30 days adode can give me more then 15 days or not befor I buy

  I want to try adobe lightroom cc that over 30 days adode can give me more then 15 days or not befor I buy

  Please see: software Adobe to trial has expired at the beginning

• creating more then a tabular form in the apex of the magician

  Hi all
  I am unable to create more then one table in a page form... don't we have another way to do... ?
  a solution may be greatly apprecieted.
  Concerning
  Vishal Roy

  Hi Vishal,

  You can have only one tabular form on a page. However, there are several threads associated with this topic, which you may find useful to consider. Some users have posted to their workarounds, so it would be interesting to search the forum for such offers. To start:

  How to have several forms of table on one page
  Multiple tabular forms with updates on the same page
  Re: why not 2 tabular forms on the same page?
  Multiple tabular forms
  2 tables form MRU/MRDing in the same table

  Kind regards
  Hilary

• Apex 4 and more then a SQL query on a page update

  We know if 4 Apex has eliminated the restriction more then an update SQL query on a page?

  If you mean tabular forms, you can have one per page.

  -Sharon

• is it possible to have validations apply to more then one button?

  is it possible to have validations apply to more then one button? If it isn't... I would copy about 10 validations and present them to a second button (if I could be bothered)...

  Rather than use a button using conditional processing and PL/SQL Expressions

  :REQUEST IN ('SAVE', 'CREATE')
  

  where these requests are names of your buttons.

  Denes Kubicek
  -------------------------------------------------------------------
  http://deneskubicek.blogspot.com/
  http://www.Opal-consulting.de/training
  http://Apex.Oracle.com/pls/OTN/f?p=31517:1
  -------------------------------------------------------------------

• Problem adding then 5 more records of database Access

  Hello - I have a behavior to add a record on my ASP page with an Access database, and it works. However, it allows only 5 records to be included in the table at the same time. New additions replace the old ones, never for a total of more than 5 files at a time. Why is this and how to fix this?

  Thanks for the replies. The number of records showing was set to 'all' - but there were some small problem that prevented more than 5 records added to the database online. I recreated the page, setting up new recordsets and insert record behaviour, and the problem has been resolved. Thanks again for the quick responses.

• Once more, Adobe Acrobat creates problems and then proves unable to solve them easily.

  Adobe Acrobat Pro XI reported a configuration error (error: 16) who asked me to uninstall and reinstall the product.  After that, the problem persists, and I was directed to contact the technical support of Adobe which was not supported.

  Acrobat still does not (at all); following the instructions does not (at all) help; and Adobe technical support does not help (at all).

  Hi Craigk20477150,

  Please refer,

  1 -Download Adobe Reader and Acrobat tool - Adobe Labs

  Configuration 2 - 16 error | CC, CS

  3 error 16 while using applications of the suite Adobe CC 2015...

  4 - in Adobe Creative Suite or Adobe Creative Cloud configuration error

  Let us know if this helps!

• problem adding more then 3 internal networks to VM

  We are trying to run the default workflow

  Liberary-> vCloudDirector-> VAPP-> virtual machine-> NETWORK-> add a NETWORK card

  
  in a loop for the addition of 8 networks internal, but it gives the following exception after crating of 3 internal networks

  "All possible network adapter addresses are in use (the dynamic Script Module name: calculateNextNetworkCardAddress #12).

  We have the version 8 material vm and we are guess, add 10 networks.

  you will appreciate your help in this matter

  Serach for action calculateNextNetworkAddress

  Change the following

  var availableAddresses = new Array('0','1','2','3');

  In something like this:

  var availableAddresses = new Array('0','1','2','3','4','5','6','7','8','9');

  And try again.

  Christophe.

• Strange problem with analog simultaneous output / input

  I use a card PCI-6221. I have an application which generates 2 waveforms (finished samples) and simultaneously records 4 channels of analog input. I am using the sample clock AO as the sample for the analog clock.

  As a test, I plugged in the first AO (AO0) all 4 channel inputs. What happens when I run the vi, it's that the first sample on the first string (AI0) has the value of the last sample that was out on AO0, of the previous generation.

  Example:

  AI0 AI1 AI2 AI3

  -0.369-0,001-0,001-0,001

  -0.001 0.062 0.062 0.062

  0.062 0,124 0,124 0,124

  etc.

  I understand that it is a problem with the relative time of update of the AO and sampling of IT.

  He has to go: AI0 read / write AO0 / read AI1 / read AI2 / read AI3.

  I use DAQmx Timing (sample clock) to specify the clock AO as the sample for the AI clock. I noticed that this has an advantage of input terminal called assets. Ah, I thought - if I put the active side to neutralize the AI always begins sampling half a clock cycle after the OD has updated. Evil. It makes absolutely no difference. Maybe the AO clock signal is a very short pulse?

  Is there a way to specify the order in which updated inputs and outputs analog / sample?

  Hi CDancer,

  Change analog output voltage is not instantaneous. It depends on the speed of scanning of the Council with the difference the tension of the previous.

  You're right that the AO sample clock is a very short pulse. As far as I remember, it is the order of 50 ns.

  Here are two ways to insert a break between the tasks of HAVE and AO:

  • Delay the first conversion of IA (AI0) regarding the sample clock HAVE: use DAQmx calendar > more > converted > sample clock delay > Delay and DelayUnits properties.
  • Delay the sample clock HAVE first with regard to the relaxation of beginning of AI: use the DAQmx > start > more > Delay and DelayUnits properties.

  Brad

• problems of Whitespace in output flat file

  Hello
  
  I wonder if anyone can help me please?
  
  I am trying to wrap a CSV flat (.txt) of a query that will return a very large set of data. The problem I have is that I can't seem to all be on a single line. There are a lot of spaces being brought back into the waiting file layouts and I don't understand how to get rid of. I'm sure that a lot of my set commands are redundant, but I tried everything I can think of to get this effective and get rid of this annoying whitespace.
  
  I am aware that the SQL concatenation is a solution, but I am very eager not to have to add even more coding for an already complex sql query. Is there a way I can get rid of the space and therefore to get my characters per line to a more manageable number?
  
  Here is the code below, lets say, the query returns three fields (emp_id, emp_name, emp_state) and two records (joe bloggs and john smith), I'd like the output in my text file:
  
  emp_id, emp_name, emp_state
  1, Botella, Florida,
  2, Jean Dupont, texas,
  
  as opposed to what I get now that there's a lot of spaces between the commas (I can't understand how to post here)
  
  could someone please advise? is there a way I can do this without having to concatenate throughout my sql query?
  
  Thank you
  
  Jon
  

  set echo off
  set feedback off
  set heading on
  set linesize 5000
  set tab on
  set trimspool on
  set trim on
  set term off
  set colsep ,
  set headsep ,
  Spool C:\Jon_Oracle_Testing\spooltext.txt
  @C:\Jon_Oracle_Testing\superquery_031110.sql --big query, around 65 columns and 250,000 rows
  spool off;

  Hello

  If emp_name is VARCHAR2 (50), then

  SELECT  emp_id
  ,     emp_name
  ,     emp_state
  ...
  

  exit 50 characters emp_name.

  To avoid this padding, you have to say

  SELECT        emp_id
  || ',' ||  emp_name
  || ',' ||  emp_state
  ...
  

  That's probably exactly what you wanted to avoid, but that's what you have to do, at least in SQL * more. (Sorry).
  You don't have to "concatenate throughout my sql query", simply concatenate the items in the SELECT clause.

  If you do this, it you don't have to SET COLSEP. The result set contains only a single column, so COLSEP will be irrelevant.