MOSFET, modeling of the measures

Similar Questions

• How to read the measurements of the model eye?

  I'm new in LabView. I use an Agilent54855A to capture a model high-speed digital and want to read these measures of model of the eyes, eyes for example height, width & vice versa of the eyes. However, I couldn't find this VI in the palette.  I can read it on the screen, but do not know how to retrieve through LabView. What should I do?

  Steve,

  Thank you. There are commands to read the eye measures model. I'm changing the existing VI to add these new features and then I will check next week.

  Best regards

  KKNG

• modeling of the RPD

  Hello

  I had a question about the modeling of the RPD.

  I had two facts F1, F2 and Dimensions D1, D2, D3

  F1 has joined D1, D2, D3

  F2 joined in the D1.

  So I did as in physical and logical layer joins and I kept F2 level Total of D2, D3.

  So far, it works very well with the measures and dimesions(F1,F2,D1,D2,D3). But my problem is that I have an attribute in F1. As soon as I put this attribute with F1, F2, D1, D2, D3 F1... F2 measurement will be void.

  I know a solution that I can make aliases of F1 and self join with F1 and bring this attribute... But who will create the additional join I want that... Is there an alternative?

  Thank you

  Rahul

  First of all you are not supposed to have an attribute in F1!

  Why? Because you set the level of content on F1 to have F1 values when using D2 and D3 (not the consistent dimension D1).

  If you don't think you need to do the same thing for the F1 F2-related attribute?

  The conclusion is that you've got: F1 does not have any attribute, because it is a fact table, it go out in a dimension and define the level of content.

  Create the additional join I want

  You don't have to pay for every single join, so there is no reason to "do not want" a join because this is how the tool works.

• 3D model of the green screen

  Hi some of you know youtybe channel called "Digital Corridor" they make great short films. I saw one behind behind the scenes of one of the videos out there, called shadow one of Mordor. You can watch it in the link if you want to. I want to know what they were doing at 14:07 minute of the video. They recorded a sword which took place and rotate in front of a green screen. It was recorded at a 120 frames per second. I'm fair to assume that they have used these images to do, sort of a 3D model of the sword that allows to follow the handle of the sword in the hands of actors to make the cool effects of stabing...? If so, how to make a 3D model using the green screen sequence? And if it's not the case why they recorded the sword like that...? THX in advance

  You make the 3D model of the actual prop sword by measuring and creating the model. Images of reference was for color grading and texturing the 3D sword to match lighting and reflections about the location. There are literally hundreds of ways to generate maps of texture to a 3D model. It is only an option. Many were probably used. Have you noticed that right after the explanation of what they were doing, the guy said "Thanks for reminding me" and pulled out her phone to take photos more? This is the technique I'd used to get a reflection of cards. I probably would have pulled something different to shoot lighting model. Look for a light sensor for 3D. The technique is not a tutorial, it's a semester in film school. I would go on the forums of APA 3D what ever you use or what you click Start blender.org digging around.

• I have a model of the Apple TV A1625 and a Logitech bluetooth kb k811.  It works very well, but how do I use to turn the Apple TV?

  I have a model of the Apple TV A1625 and a Logitech bluetooth kb k811.  It works very well, but how do I use to turn the Apple TV?  Which button or buttons use?

  Is not possible. You'll need to use the Apple TV remote to turn it off.

• Is it possible to organize the "My models" in the the for the evaluation version of Pages?

  Is it possible to organize the "My models" in the latest version of Pages for the latest version of El Capitan?  I would like to organize patterns that I create in folders that was available in many earlier versions.  I would consider even install some software to do this.  Thanks for your thoughts.

  Pages v5.6.1 supports only the folder my models. It does not support peer model files, model external Pages or subfolders at the location of the folder my models. It is a departure from Pages ' 09 v4.3.

• Can you determine the model of the iPad with DK S/N * VD2?

  Can you determine the model of the iPad with DK S/N * VD2? I've upgraded to a newer iPad and need to sell the former. He reconnects with the default status, and I would go instead through the installer to get this info.

  < personal information under the direction of the host >

  Go to settings - general - about - Scroll down - must be model number

  (1241)

• need an exact model of the PCI communications controller driver

  Mr President.

  my model is G62 B39 SE

  WINDOWS 7

  64-BIT

  HARWARE ID IS

  PCI\VEN_8086 & DEV_3B64 & SUBSYS_1439103C & REV_06

  PCI\VEN_8086 & DEV_3B64 & SUBSYS_1439103C

  PCI\VEN_8086 & DEV_3B64 & CC_078000

  PCI\VEN_8086 & DEV_3B64 & CC_0780

  Please I need an accurate model of the PCI communications controller driver

  Hello

  It's a system driver wise called "Intel Management Engine Interface (MEI) ' as mentioned in the following link:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-83746-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 5040732 & sw_lang =

  Please download the exe on the link above and install on your machine.

  Kind regards.

• What model is the iPhone Unlocked sim-free 6 s, model 1633 or 1688? The locked phone can be unlocked and used on any sim

  What model is the iPhone Unlocked sim-free 6 s, model 1633 or 1688? The locked phone can be unlocked and used on any sim?

  If the iPhone is locked: only the provider it is locked, can unlock.

• [Solved] G505 all models even the motherboard and cooling solution?

  Hello

  I want to improve the APU in my notebook G505.

  Because of the tdp of my favorite APU is higher, I wanted to know if all g505 models have the same motherboard and cooling the installed solution.

  Same CPU - Z cannot tell me a lot about my current motherboard.

  Thank you & welcome,

  Nougatbyte

  Here are the compatible devices for g505:

  

• cDAQ9184 for the measurement of the angular position...

  
  

  Hello

  It works now... Thanks for the customer support OR. The measure of the angular position uses a signal generated internally by using a counter ("/ cDAQ1/Ctr1InternalOutput").

  ARO

  Ilkka

• Optimize on the harmonics to the measured power of P1dB

  How to optimize the harmonics to the measured power of P1dB? Currently, I am doing this with lots of equations but is there a direct way to implement?

  XDB element to measure the power for example the 2nd harmonic by the parameter FUNC_OUT to P ("2f1") and an optimization of the configuration for this goal.

• Output of the model to the user of controlled output

  I have a simple model acting on AO1 of my system that generates an analog output of material on channel 1.

  Sometimes I want to stop the model (no break, but stop) and a user interface acting directly on the AO1 via a control. For this, I use the Value.vi of single channel defined in the API Veristand. The channel is defined as targets/HILRT2/material/chassis/DAQ/Dev2/Analog Output / AO1 (1), as it should, in my view, but for some reason, the

  It is not generated output...

  Outputs from the model are also connected to target/HILRT2/material/chassis/DAQ/Dev2/Analog Output / AO1 and I wonder if (1) and (2) are not not incompatible...

  Somehow I would like a way to easily change the control to a particular production of a GUI control of model output, or get the model of the road if necessary.

  L.

  PS: VS2011, LV 2011

  I see.

  You can use the definition of system API call 'get the mappings' for a list of mappings.

  

  If you don't know what sysdef is running, you can use the API to run, call to get the State of the system and even to get the available channels.

  

• Import data from the .tdms file and comparing with the measured .tdms file

  Greetings,
  I want to make an application that writes the values measured in a .tdms file.
  But I want to do a separate database in a .tdms file that contains the theoretical values.
  After the measurement, the application must compare the measured values with the theoretical.
  If the application needs to read that a cell of the .tdms file.
  Is this possible?

  Thank you

  Here are some materials:

  http://www.NI.com/white-paper/3727/en

  http://www.NI.com/white-paper/5696/en

  I also recommend that you can start with examples of PDM in LV to get acquainted.

• Retrieve the names of the measures of the stage using LabVIEW

  How retrieve you the names of the measures a digital multiple of the step using LabVIEW?

  I have built a vi to be called TestStand and will pass the "ThisContext', but the vi is not complie.  That's how far I got.  The vi is attached.  The error message is:

  "The method selected in the invoke node is invalid or no method has been chosen.  Click on the invoke node and select a method. »

  My vi is an attempt to write the code of

  Normal
  0

  fake
  fake
  fake

  MicrosoftInternetExplorer4

  / * Style definitions * /.
  table. MsoNormalTable
  {mso-style-name: "Table Normal";}
  MSO-knew-rowband-size: 0;
  MSO-knew-colband-size: 0;
  MSO-style - noshow:yes;
  "mso-style-parent:" ";" "
  MSO-padding-alt: 0 to 5.4pt 0 to 5.4pt;
  MSO-para-margin: 0;
  MSO-para-margin-bottom: .0001pt;
  MSO-pagination: widow-orphan;
  do-size: 10.0pt;
  do-family: "Times New Roman";
  MSO-ansi-language: #0400;
  mso-fareast-language: #0400;
  mso-bidi-language: #0400 ;}

  message.ID = 10653 in LabVIEW.  More precisely:

  Normal
  0

  fake
  fake
  fake

  MicrosoftInternetExplorer4

  / * Style definitions * /.
  table. MsoNormalTable
  {mso-style-name: "Table Normal";}
  MSO-knew-rowband-size: 0;
  MSO-knew-colband-size: 0;
  MSO-style - noshow:yes;
  "mso-style-parent:" ";" "
  MSO-padding-alt: 0 to 5.4pt 0 to 5.4pt;
  MSO-para-margin: 0;
  MSO-para-margin-bottom: .0001pt;
  MSO-pagination: widow-orphan;
  do-size: 10.0pt;
  do-family: "Times New Roman";
  MSO-ansi-language: #0400;
  mso-fareast-language: #0400;
  mso-bidi-language: #0400 ;}

  Dim MyStep ACE [step]
  Dim MyMeasurement As PropertyObject

  MyStep =
  seqContext.AsPropertyObject.GetPropertyObject ("Step", 0)
  MyMeasurement =
  MyStep.AsPropertyObject.GetPropertyObject ("Result.Measurement [0]", 0 ")

  MsgBox (MyMeasurement.Name)

  Can someone help me complete the vi?

  Thank you

  Thank you very much.

  A small change to the vi required.