Optimize on the harmonics to the measured power of P1dB

Similar Questions

• How can I get the digital power meter?

  How can I get the digital power meter?

  I use a method similar to the example below to measure the market factor using the inputs of a multifunction data acquisition meter.  If the duty cycle is 0% or 100% for a given period, DAQ reading times out and returns an error.  In this case, I would get the digital state of the counter of entry so I can put as cycle to 0% or 100%.  I want to do it without knowing the digital port and line the entrance of counter... for example I would like to continue referencing DAQ/ctrX since I already have this information.

  The application uses an M series: PXI-6229 DAQ and LabVIEW 2011 to make a system customized for VeriStand.

  https://decibel.NI.com/content/docs/doc-12396

  For the moment I wired the block diagram to add a case structure to check the meter ID and string constants to set the identifier of digital input, as they share the physical connection.  As much as I can say that makes the specific code for the PXI-6229 (or any DAQ with only two counters that share connections with p2.1 and p) 1.4

  I have attached the VI sub.

  When the device is used with a different data acquisition, I can add the connection and/or separate control.  Looks like at least one will be necessary given that the meter can only detect the edges... I think it was the piece of information I needed.

  Thanks for your help!

• Problems with the DC Power supply QL 355TP: I can not set the tension level

  Hello

  I'm trying to control a power supply DC via GPIB. The power supply being used is the QL355TP of society Thurlby Thandar Instruments (TTi). There are no drivers of OR to control the instruments, then I need to download and install the driver from the website of TTi: the package I installed is as follows:

  "QL - P power supplies, (including QL Series II) series pilot National instruments (Labview and CVI)"

  and I also installed the following:

  "QL - P power supplies (including QL Series II) series, IVI driver"

  So, my problem is that when I try to use the sample application of the driver 'Volts.vi DC Ouput'; defines a specific level voltage, does not work properly. The application gives no error, but it is not set the specific level voltage. However, other functions work properly, as the measure or activate the output. I tried a lot of things, but I don't know why it does not work.

  I enclose the block diagram of the application and the front panel:

  

  

  I must say that I barely control instruments using Labview and is possible that this problem would be because I did not consider things basic and mandatory.

  Any help is appreciated.

  Thank you.

  p.s. Try to replace the decimal comma to period. It is possible that the driver does not correctly handle the comma.

• substitute the new power cord on the charger?

  I have a MACBOOK pro... the cord to alveoli? It has been is so frayed since I am under warranty they sent me a new. I need instructions on how to replace it on the charger. I'm out of the country on a small island so I can't communicate with them... Please help me find video or instructions. Thank you

  Look at the photos in this article:

  Find the right adapter cord for your laptop Mac - Apple Support and sector

  the AC power cord slips laterally for removal and replacement "block". Does have a substantial 'push' to begin to move.

• Satellite T130 - turns off because the low power

  My 130 just turns off without notice because of the low power, but it shows remaining 40-50% power bfore, it turns off. What is wrong with him?

  Also there is no warning of low power, it just turns off. Any ideas?

  Hello

  That s really strange and I've never heard of this problem...

  You use a Toshiba original AC/DC adapter?
  Have you checked the Web from Toshiba website for updates to the BIOS?
  Have you tested the same with OS preinstalled Toshiba?

• How to use the external power supply on Camileo s20

  How the external power is connected to S20 and registration is possible at the same time. When the USB is plugged into my camera it will not turn on.

  1. open the battery cover
  2. remove the battery
  3 connect the usb power cable

  Now you can use S20 with external power without draining the battery.

  Crazy but true...

• Satellite T110-10 x gave me the error as soon as the first power on

  Hello!

  My new Satellite T110-10 x gave me the error as soon as the first power on.

  http://I25.Tinypic.com/33bhiqq.jpg

  I try to start in Safe Mode, same problem:

  http://I25.Tinypic.com/2hdvfis.jpg

  I start the recovery procedure from HDD using F8 and repair my computer options but it's «Repair my...» "lack from the advanced boot options menu:"

  http://I31.Tinypic.com/2pz9xkz.jpg

  I do same like Dwardlow and all start Norway as a new "machine".
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=53952

  Thanks a lot Dwardlow for your help!
  PS: I'm from Romania, sorry for my bad English!

  Thanks for the comments.
  Good to know that this thread has helped you.
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=53952

  Thanks to user for nice workaround Dwardlow!

• "Monitor the message" Power button locked ".

  New monitor 23 "HP - HP 2310 m accidentally pressed the button too long power; now, I can't get the monitor to turn off completely. When the computer is off the screen goes into sleep mode with orange orange LED (switch) continuously. How can I completely disable the monitor and the message "Power button lock '? Thank you

  From the Manual:

  Power Button lockout - indicates the power button is locked. If the power button is locked, the Power lock button warning message.

  ◦ If the power button is locked, press and hold the power button for 10 seconds to unlock the function of the power button.

  ◦ If the switch is open, press in and hold the button for 10 seconds to lock power button function.

  See you soon,.

• How one doesn't check the battery power level?

  How is - a check the battery power level, rather than just waiting for the clock to tell me that it is 10%?

  The watch face, dragging up and show your looks. Swipe to the left to the right to find the battery look.

  If you don't see it, on your iPhone, open the application of the watch and under the eyes, don't forget it's on.

  It can also be added as a Complication to a lot of faces watch so it is always visible.

• Problem with the mouse after repluging to the main power of the 1640CDT

  If I unplug my 1640 from the mains and plug it in again once, it will not recognize a mouse external or internal.
  After 4 or more reboots and everything works again.
  Any idea?

  Hello

  When there occure failure for the first time? Have you changed your, update or whatever installed when it is breaking?

  You could try to de - and reinstall the standard mouse driver in Device Manager (could be found in the Control Panel - System - Device Manager)

  Also you had written that the failure occurred when pluging in the AC adapter. So, you could also de - and reinstall the Toshiba Power Saver!

  Try it!

  Chris

• Tecra A8 - no CPU max speed under the "full power" profile of PowerSaver

  Hello world

  My Tecra A8-S8514 (Core 2 Duo T7200 @ 2 GHz) has this problem: when I put the PowerSaver profile to 'Full Power' of the CPU sets his speed at 1.4 GHz.
  My company has purchased 2 of the A8 and testing has been replicated in the second laptop, which leads me to believe that there is a bug with the PowerSaver application instead of a faulty hardware.

  The Toshiba helpline ignore the fact that the 2 laptops have the same problem, insisted that I should do a system restore and it does not solve the problem so take it to a service center. There was no way 'experts' would admit the application could be evil and submit an application for the programmers so that they can test and engineer a fix.

  Please someone else with a Tecra A8-S8514 can test this? I used the utility Intel Processor and a free benchmark called GeekBench.

  Thanks in advance!

  Hello

  I don t think that the Toshiba Power saver is defective.
  To my knowledge, these tools are tested a lot of time and should work fine.

  In your case, I recommend to check settings in the Toshiba HWSetup.
  You'll find the CPU tab.

  There, you should check if the frequency of the processor dynamic Mode is set to high or dynamically switch able or always low. These settings may have an influence on the speed of the CPU.

  Best regards

• M4: Regulation of the CPU power and fan - tablet is running hot and noisy

  My M4 is running hot and and the frequent active noisy fan in the normal power setting. This allows to improve some during the definition of the maximum energy saving options: battery life. But still the fan starts running and short relatively frequent. The fan noise is high enough to be quite irritating in a quiet environment.

  Is this normal?

  Also my M4 allows on occations to memorize the fan.
  Cpu temperature drops from 58 to about 44 C after awhile, but the fan still works.
  However, if I go on hold for 1 second and back, fan control is reset and the fan turns off.
  Yourself or others behave the same?

  Conditions are improving a little tuning down the cpu down voltage using hardware control (NHC) Notebook
  (http://www.pbus-167.com/)

  East of problems common to the M4 or Tecra series?

  GeirS

  Hello

  If the operating temperature of the machine goes upward, so that the cooling fan turns on.
  Many parts for example produce a lot of heat from the graphics card.
  In addition the CPU temperature increases if many processes are running in the context of the operating system or if you are working with programs (i.e. playing games).
  If you have a laptop computer with a processor that is hot much faster one and then another, it must be cooled more often.
  You can believe me :) It's not a fault!

  If you wish, you can try changing the cooling method parameter in Toshiba power saver utility.

  Best regards

• WIFI connection disappears when not on the main power

  My wireless LAN disappear when my laptop is not connected to the electric network, if it is connected there is no problem being online for hours, but when you pull the plug, five minutes later the network is not available.
  What could be the problem?
  I have not found a solution in the toshiba (Toshiba Energieverwaltung) power regulator

  Hello

  I guess that the energy saving mode is activated in the WLan card properties.
  If the laptop works with battery only the WLan card tries to save the battery power.
  Go in the WLan card properties and select the Advanced tab (if possible)
  Disable the power saving mode.

• ProBook 4530 s BIOS update fails - "...". the computer is not connected to the external power supply. »

  I made an update of the system to the original settings and everything seems to go as usual.  While performiong the many windows updates, I noticed that the battery indicator indicates "no battery installed.  I found a few solutions dealing with this problem (none of the other solutions worked) and that which is shown updating BIOS.  I checked and the BIOS is F.07 and the current version is F.41.  I downloaded the update and begun the process of Windows.  The system restarts to start the process, but when the BIOS updated starts I get the following message:

  "A significant update of the BIOS of the system is available, but the computer is not connected to the external power supply.  Please connect the external power supply and then press Enter to continue. »

  The computer is connected to the power of HP to the original address since it is the only way so he can turn it on.  I tried removing the battery and from the update only the connected power and get the same result.

  Either way, I tried to insert a different battery, I have more than one of these laptops.

  Sorry

  Please test the battery after boot press F2 HP Diagnostics

  http://support.HP.com/us-en/document/c00821429

  and calibration of the battery for laptop

  http://support.HP.com/us-en/document/c00817650

• Want to 700-019 H5P24AA #BL: what is the side power maxiumum supported for a video card in Envy 700

  I want to improve my HD 8570 delivered installed video card.

  What is the rated power more of a video card that would work with the installed 450W power supply.

  CPU is 4770 I7 motherboard: MS-7826 (Kaili)

  Thank you

  The 700 WANT referenced has a 460 watt POWER supply with a PCI-E 6-pin power supply.  In addition, this particular model PC has a version 8 for most graphics cards latest UEFI BIOS which are rated to work with a 460 Watt power supply would probably work.

  Of EVGA has a NVIDIA GTX 960 modelthat requires only a single PCI-E power connector 6-pin. Other models of the EVGA GTX 960 graphics cards require a PCI-E power connector, 8 pins.