mother IPIEL-LB should SATA0 on the card be used. How can I work around, connector is broken
has pull the connection apart and the female end which is attached to the motherbaord's is no longer attached
do I need something plugged into the port of sata0? or, I can work around, then...?
I tried windows Boot and it is stuck in a loop, the blue screen just keeps
Thank you
To ignore individual SATA port on the POST, you can disable it in the BIOS-like point:
Onboard PATA (IDE) / SATA devices
SATA 0 must match the 1st disk. Connect your HARD drive to SATA port system.
Tags: HP Desktops
Similar Questions
-
9 my Windows update does not work. It is said to open "Datastore" and del; files allow you updates. When I try to open the data store in a first time, I wonder what program to use, and then said "can not open because it is used by another program." This Windows Vista bit. I can't install Explorer 9 until I have a workaround. Help.
Hello
What is the exact error code or error message?
I suggest to reset the Windows update components and then try to check updates, and then install the updates and check if it helps.
How to reset the Windows Update components?: http://support.microsoft.com/kb/971058
Solve problems when you can not install Internet Explorer 9: http://support.microsoft.com/kb/2409098
I hope that helps!
-
When I try to scan with my CanoScan N640P ex scanner I receive a message indicating the Port to the printer that is used by another device. How can I work around this problem?
Hi ejp70,
1. did you of recent changes on the computer?
2. to when was the last time the scanner was working fine?
3. you have any other printer\scanner connected to the computer?
If you have any other printer\scanner connected to the computer, disconnect them and check if it works.
I suggest that you uninstall and reinstall the scanner to the computer, also make sure that you install the latest drivers for scanner on Canon website.
-
I need to disable my CC on a single computer, but the grave Manager crashes when I try to do. How can I work around this problem?
Try the 2nd link
Remove the license on a computer http://forums.adobe.com/thread/1442423?tstart=0 clouds can help
-read http://helpx.adobe.com/x-productkb/policy-pricing/error-maxium-acitvation-exceeded.html
-or https://helpx.adobe.com/x-productkb/policy-pricing/activate-deactivate-products.html
-
Hey everybody,
This is my first post. A couple of years, I bought a used Macbook. I never did update (it is so long and then I decide to Watch youtube videos... it is not used for work or school). So now, I've updated the Yosemite and I want to get everything updated and it requires that I put a password of the former owner apple ID to update iTunes, iPhoto and iMovie. How can I get around this without reformatting and losing thousands of photos and all my files.
Thank you guys.
If you are the legal owner of the computer, but if the software you want is owned by another user is not yours. You cannot add any other purchases to your ID. You own, or that they are.
backup with time machine
move all your data in the folder user to an external drive or a flash drive is formatted in a format not mac or by checking the box "ignore this volume permissions" in get info of this device.
do a clean install of the operating system
create a new administrative account
the Time Machine restore requests
transfer your data from external sites back to the new account.
-
I am preloading of an image and then set an image already on the page for a preloaded image by setting equal to the preloaded images CBC CBC. This results in the image image be reloaded, although it should be cached. How can I get to Exchange just in the cached image?
Try announcement Web development / standards evangelism MozillaZine forum. The helpers there are better informed on the problems of development of web page with Firefox.
http://forums.mozillazine.org/viewforum.php?f=25
You will need to register and log in to post in this forum. -
I'm trying to circumvent a potentiometer that controls a blower DC motor. The potentiometer (10 kohm) has a wire greeen (+ 10V) a blue wire (ground) and a red wire (AI1 0-10 V voltage). These three sons feed a mounted ABB inverter which converts the 3 phases power somehow (220-240V) to a signal for the DC motor in the blower. I want to make a loop of speed control for the speed of the blower in Labview and I have to work around the knob. If I intend to use a PID that is equivalent to a speed measured at the speed setting, how can I get an output signal to my SCC-AO10 to the speed control? Asked me to use a switch that would allow to use potentiometer or the automatic control loop in Labview. Which wires should I cut the potentiometer and where I need to connect them on the SCC-AO10?
Someone did this and the PID of a blower motor? Please help me if you can.
«The promising (10 kohm) (10 kohm) potentiometer potentiometer has a wire greeen (+ 10V) a blue wire (ground) and a red wire (AI1 0-10 V voltage).» a greeen wire (+ 10V) a blue wire (ground) and a red wire (AI1 0-10 V voltage). »
If you release the + 10V and the ground.
The reader reacts to the voltage input (0 - 10V)
Simply connect this red wire to your analog output module and ground (blue) on the floor of your module.
.
-
During the upgrade of Windows Vista Edition Family Premium of Windows 7 Home Premium, he stopped at the compatibility check and asked to uninstall McAfee Personal Firewall Plus. I uninstalled McAfee Total Protection, but the problem remains. I contacted the technical support of McAfee and it installed and running a deep cleaning products McAfee removal. But the problem remains. What should I do to work around the compatibility check, so that I can complete the upgrade to Windows 7 Home Premium.
Go to C:\Program Files
Remove the McAfee program from there folders
Restart the installation again.
Also:
1. click on start, type msconfig in the search box and press ENTER.
User account control permission
If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
2. in the general tab, click Selective startup.
3. under Selective startup, clear the check box load startup items.
4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
5. click on OK.
6. When you are prompted, click on restart.
7. after the computer starts, check if the problem is resolved.
-
I recently had to use the restore disc that came with my computer. Accordingly, I now have Internet Explorer 6. To switch to IE7 or IE8, I need to reinstall the Service Packs. I can download them, but I can not install them because I have IE6 and downloads could not connect to the server. How can I fix?
Hi wildcar
You can go directly to Windows XP SP3 . Download and install it from the link below.
Windows XP SP3.
http://www.Microsoft.com/en-US/Download/details.aspx?ID=24
Ignore the text that says: it is only intended for Professional computer and network facilities.
Important note: If your system has an AMD processor, download them and install Microsoft windows update utility for the processors not intel from the link below, before you install Windows XP SP3.
Update for Windows XP (KB953356)
http://www.Microsoft.com/en-US/Download/details.aspx?ID=23751
After you are done you can try to install ie8 again, if it has not already been offered through windows update.
-
How can I bypass the password entry to windows xp professional?
Hello
Unfortunately we are unable to help bypass the passwords to reset or change a password.
I suggest you to refer to this link:
http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37It will be useful.
-
It is an old Dell Optiplex 150 with professional nt Windows 2000 software. I have a database of collection of stamp on it, but after having changed my password several months ago, this password does not work. Suggestions on how I can get in? ttremmel
Hello
Thanks for posting your query in Microsoft Community.
From your problem description, I understand that the newly changed password does not work.I ask of post you your query on this link
http://social.technet.Microsoft.com/forums/en-us/categories
For any Windows help in the future, feel free to contact us and we will be happy to help you.
-
I found that my laptop was only on xp pro service Pack1, so I made a few updates now, ive got running on service pack 3 but it keeps flashing up I have a non-genuine version of windows, windows is activated and I have a real sticker on the bottom of my laptop with the product key to this topic! This problem me by critical updates prevents someone can help!
Thank you very much
Rob
Update your product key, and use the one you located in the laptop, you can check out the link below to update your product key.
http://go.Microsoft.com/fwlink/?LinkId=204141
To update your product key
Open the Windows product key update tool.
When you are prompted to run or save the installation program from the Windows product key update tool, click run.
Follow the instructions in the installer.
-
I tried every password I used in the past and nothing works.
Hi Raydeady,
Try to connect to your computer as administrator in safe mode. To enter safemode refer: http://www.ehow.com/how_2052288_start-windows-xp-safe-mode.html
On the home screen, press ALT + CTRL + DELETE (all three keys at the same time), two times, you will get the classic login prompt. Enter the username as admin and leave the password empty (unless you have set a password for the administrator account). On connection, click on Start-> settings-> Control Panel-> users & passwords, locate your login account and reset the password.
I hope this helps.
-
HI - we are trying to install the beta version (18) on a Windows 8 machine for one of our customers. But, the update of Windows does not allow that to happen. We changed the approach of updating to do not have the automatic updates. But that does not solve the problem. Any help is appreciated! I guess it's a pretty easy fix, but unfortunately I'm not Windows savvy these days.
Thank you!
Oh, it's not good advice. Uninstall the last update to Flash will not remove Flash of the system, and it will leave you with a vulnerable version, the Senior Flash Player. Install the player ActiveX for Win7 won't upgrade Flash Player component built into Internet Explorer, then the user will be still stuck with an outdated version and no beta version until they run windows update again.
We distribute a beta version for Internet Explorer on Windows 8 and over all because we do not have this distribution channel (it's the same reason that we do not have a beta of Chrome), and the binary of Win8 differ from those we publish for Windows 7. There is no effective way to do at the moment.
We talk to Microsoft to provide a mechanism for the distribution of beta versions and releases of extended support of Flash Player in Win8 + users, but these vehicles of distribution would have to come directly from Microsoft and we always talk just to this topic, so there is no solution in the short term.
If you want to evaluate beta versions on Win8 + you look essentially NPAPI on Firefox or PPAPI on the opera.
-
The web page you are trying to view seems to be for the Charlotte regional Realtor Association and requires Flash Player to run.
You can check if your browser has Flash Player installed from here http://www.adobe.com/software/flash/about/. You will need to click on the link to IE for 'Protected Mode' and adjust it to allow you to browse the contents of carolinamls.com.
Maybe you are looking for
-
How can I send pictures to my e-mail account to the cell phone of others?
I have a request to send photos to someone who uses their smart phone and I do not have pictures in a phone; only on my PC. Can I send pictures of this person's mobile phone? They gave me their number. Thank you
-
Main Inbox do not display messages
Hello. I realize there have been similar topics, but could not see a corresponding to the mine. I have around 30-40 emails all managed in thunderbird. I used to be able to see all messages in the section of the main inbox at the top. But now it is co
-
How to change the size of the icon and desktop to original image?
I logged on my computer and for reason of small images and icons are on that plus setting ive been looking for a way to set it to normal size. when im on the internet, I can enlarge to 100% instead of an increase of the size but not understand how to
-
updated my photoshop in 2015 and now it will not open at all ~ please help!
I've updated my photoshop - and I also tried to uninstall and reinstall the program, but nothing works! The program will not just open!Help!
-
adobe_licutil process does not
I noticed a stack of process adobe_licutil in the classified activity monitor "does not". I force quit them, but they come right back and eventually crash. I'm about to restart and maybe it's all that's going to take, but given the State of updates l