Motorola PC connection

Similar Questions

• ETA on Camera Connection Kit?

  So, I was hoping that this would be available before the next trip. Ordered from Amazon that will let me know and ship 'when it is available." See she not Motorola store either. I have the Wifi only model Xoom.

  I obviously won't get it in time, but an idea when it will be available?

  Don't want to use Xoom as my camera.

  @dodgema,

  Have you tried to check that your local Best Buy store online? Several of my local stores have cable in stock today and the Best Buy store has in stock now, then you might have sent overnight for delivery Monday.

  Here is the link online to check availability:

  http://www.BestBuy.com/site/Motorola+-+camera+connection+kit+for+Motorola+Xoom/2610139.p?skuId=26101...

  -Doc

• Trying to extend my wifi network.

  I want to thank my wifi at home. I have a Motorola router connected to an Airport extreme via an ethernet cable. Can I now run an ethernet cable from the Airport extreme to another device to "extend" the coverage of the network airport?

  Yes, that would be the basis of an extensive network of itinerant type . Let us know if you need assistance in setting up.

• Dysfunction of the touch screen

  Hello everyone.

  I've had my phone for only less than a year and lately its touchscreen acted upward. Sometimes, when I try to text my phone detects keys on random spots on the screen cause me wrong spell words or select random items on my screen. I keep the screen pretty clean with a rag and my phone is never dipped in water. I don't have insurance on my phone but I know that my warranty is still good. Any entry if I can get my phone repaired or replaced by Motorola?

  Thank you!

  You can start by going to the support and location of repair of Motorola. Connect all the information they ask for, or call the phone number that is listed. It usually takes a week to get your phone when you send in for repair. I am pleased to see that you should be covered by the warranty, since it's less than a year.

  In any case, it will be the best place to start. I hope everything is working for you. I hope this helps.

• Airport Time Capsule drops Wifi/Internet with 7.7.3

  I started having a lot of problems with my internet connection.   I have TWC with my own Motorola Modem connected to a running 7.7.3 TC firmware (about 14 months or two).    The internet continues to lose connectivity.   The lights on the modem are beautiful and the TC has constantly green.   But in the Airport utility, the modem (internet) is yellow.   My hard CAT5 connection from my computer has no internet.   All devices as the Apple TV4, iPhone and iPad are all connected wireless because I can connect to the computer for the movies on the hard drive of my computer... But no real internet connection.

  I called 6 times in the last week and it was recommended that I replace the modem... What I did.  Alas, no more than 24 hours later the same issue again.  TWC seems to think something is wrong with he TC... Is - this right, its connected to my devices, but not the modem for the internet?   I read something on the DNS servers and away provided TWC DSN servers.  Long time without activity and the TC loses the connection?

  Does anyone have any help here?   Everything about my new ATV4?

  Thank you

  I have TWC with my own Motorola Modem

  This modem do you have? What did you replace by? Need a real model number.

  The new TC there a lot of problems with some Motorola modems... but it is not easily reproducible. The fact that it ran ok for 14 and suddenly started having problems is also common... It seems they fall more often if this is the first day, and then after a year or two.

  I read something on the DNS servers and away provided TWC DSN servers.

  You can try using Google's DNS servers in the TC and see if that changes anything... or in the client and see if that fixes things... Any kind of test worth it... results negative are valid search... they offer a key to what is NOT the problem.

  Everything about my new ATV4?

  Again, it is simple trial and error... Give up ATV4 for a trial period. Simple as pie.

  Reset the TC factory and redo the installation.

  I recommend the following.

  Start from a factory reset. No files are lost on the drive hard in doing so.

  Universal factory reset

  Turning off the TC... That is, remove the power supply cord or the power at the wall outlet, wait 10 seconds... Hold the reset button... be nice... Turn on always even now in reset... and keep holding in for another 10 seconds. You may need assistance because it is difficult to hold in reset and power on. It will show the success quickly flashing led front. Release reset... and wait a few minutes for the TC to reset and return with the factory settings. If the front LED flashes quickly you missed and simply try again. The reset is quite fragile in these... Press the key while it is just click away and not more... I've seen people bend lever or even break. I use a toothpick as a tool.

  NB. None of your files on the hard drive of the TC are removed... This simply clears the settings of the router of the TC.

  The installer the TC.

  And then redo the configuration of the computer with the Mavericks - Yosemite - ElCapo. (MYELCAP)

  1. the use of very short names... NO APPLE RECOMMENDED names. Without the space and pure alphanumeric characters.

  for example TCgen5 for the base station and the name of the TCwifi wireless.

  If the problem is using wireless TC24ghz and TC5ghz with fixed channels as it also seems to help stop the nonsense. But it can be tried in the second round. IE, plan on a first and second series of changes to fix this... If all goes well... I note other steps can you tour2.

  2. use all passwords also consistent with 1. but maybe a little longer. IE 8 and 20 characters of mixed cases and numbers... no alphanumeric non-caracteres.

  3. If the TC is router, you can ignore this point. It is only a problem when the TC is bridged.

  If ensure that the TC is always the same IP address... you will need to do this on the main router using a dhcp reservation... or a bit more complex setup by using the static IP address in the TC. But it's important for deriving from intellectual property in all directions when MYELCAP do not remember his name for 5 min after a reboot done for poor network management.

  4. check that your share on the computer name does not change... Make sure that it is also in line with the above... short without space and pure alphanumeric... but this change will mess up your TM backup... so be prepared to make a new, full backup. Sorry... keep this one for the second round, if you want to avoid a new backup.

  5 attach the TC disc into the computer manually.

  In Finder, go, connect to the server in the main menu,

  Type in SMB://192.168.0.254 (or whatever ip of TC is that you made static. It's a default router 10.0.1.1 and I encourage people to stick with it unless you know what you're doing).

  You can use the name... SMB://TCgen5.local where you replace TCgen5 with your name of TC... local is the default domain of the TC and does not change.

  However the names are not so easy as... the IP address nor reliable. They are not at least not in Yosemite. The field can also be a problem if you are not clogged or wireless directly to the Treasury Board.

  6. ensure that IPv6 is set to link-local only in the computer. For example wireless open network, wireless and Advanced preferences / TCP/IP... and the difficulty of IPv6. link-local only. Do the same for the ethernet if you use it.

  It is a lot more jiggery pokery, you can try, but the above is a good start... If you still find not reliable... don't be surprised.

  You may need to do more work on the computer itself. for example, to reset the NVRAM/PRAM/SMC... helped some people. A clean installation of the operating system is also useful if you update installed.

  https://discussions.Apple.com/message/29202159?ac_cid=ha123456#29202159

  Let us know how you go.

• Office Jet Pro 8600: problem of authentication on a Android phone net Office Pro 8600

  Hi my name is Jack and I get an authentication problem when setting up my Android smartphone version 5.1 Lollipop printing to Office Jet Pro 8600 with the last service Plugin from Google HP play printing store

  Hi Banhien

  After two days of frustrating trying to get my Motorola Smartphone connect and print on my HP Officejet Pro 8600, I finally saw the light. He seems to think I didn't need to change my home network (SSID) as suggested by the consumer cell phone support to overcome the problem of authentication. Thinking as the phone OS was ANDROID 5.1, it is the necessary IP to it see the printer. My problem was that I kept entering my IP Phones ANDROID for it to see the printer instead of the IP to printers for the phone to connect to the printer. Once I realized that and I replaced the printer IP in the phone, Bingo, it worked 'awesome' with the print service plugin. I want to thank you for the suggestion to use HP Eprint app that I don't know who would have functioned as if I got the IP address in the configuration without the telephone.

  Jack1121

• Apple TV 4th gen: video stutters/buffers when bluetooth connected to headset Motorola SS9 - HD

  Nice day!  My new Apple TV 4th gen: video stutters/pads several times when connected in bluetooth for headset Motorola S9 - HD.  Normal play time before the start of the stuttering/buffering is about 15 seconds.  The headphone stops also in stuttering.  After that the buffer of spinning button stops, all goes back to normal until the next cycle.  This happens on all video activity of any source.  If I disconnect the headset in the bluetooth settings, everything is completely OK.  This is a brand new Apple TV 4, with the latest updates.  This stuttering also occurs when of the Air Airplaying of my iPad, or if playback purchased iTunes movies.

  The main reason for the purchase of this 4th Apple TV:

  1. availability of the App Store of Apple TV.

  2. ability to connect his bluetooth headset and ensure the privacy of the other

  3. the beautiful screensavers.

  4. menu main display and interface.

  5. Siri Remote.

  Others have run into this problem?  Is it known to be a workaround?

  Thank you very much for your time.

  Bill

  I wanted to add to my previous question that I tested the speed of the WiFi using my iPad Air in the same room with the Apple TV 4. Used SpeedOf.Me Lite and went up 23 Mbps download and shipping.

  Should have mentioned this in the original post.

  Bill

• Connectivity with AT & T-Motorola 3360 and Airport Extreme problems

  Bought a new extreme-Airport (7.7.3) to replace my old AE after 9 years of service.  The installation procedure, but could not get the airport to connect with my modem (Motorola 3360).  Called at & T and they crossed put me the modem in Bridge mode and which seemed to work.  But only temporarily (about 5 hours).  Restart the modem and the airport was not working.  Troubleshooting I tried to plug my MacBook directly into the modem, but even the computer couldn't get an internet connection.  Another call to AT & T and they reconfigure the modem to their end.  After 90 minutes and try everything they could, they have finally admitted defeat and told me that they could not solve the problem.

  However, after a fairly exhaustive search of this forum, seems to be two issues that many people is with Airport extreme.  One is that the modem (in this case a Motorola 3360) is perhaps not fully compatible with the airport.  The AT & T support person was not aware of this until I asked about it, so she did a quick search and was rather surprised to see that there is a lot of people having problems with the Motorola Modem.  She told me that they use no more Motorola modems but ship the 6200 of Netgear.  "All know issues?", I asked.  She sought and, to his surprise, even once, there was.

  So, first question.  Does anyone know a modem that is compatible with the airport or use one that they had to limit problems with?

  The second question prevailing seems to be with the IPv6 protocol.  Anyone know if there are problems with the AT & T IPv6 protocol and the most extreme airport?  I did not disable IPv6 yet to see if that helps.  I thought I'd ask here first.  Couldn't find anything on the AT & T site.

  When I return from the road (great place to go to get away from technology) I will make a new round of full power of all the components and try Setup again from scratch.

  Any ideas or suggestions would be greatly appreciated.  Miss all know profanity.

  Thank you.

  Any other relevant information: 6.3.1 the utility Airport, Airport Extreme 7.7.3, MacBook Pro running 10.8.4, modem Motorola 3360, AT & T high speed DSL, shoe size 11-1/2 wide.

  When you have configured the 3360 as a 'bridge', this would mean that the AirPort Extreme should then be put in place to provide the PPPoE connection service. The airports are not known for their reliability in this type of installation... no matter the type of modem that you can select, so I drop this method as a connection option.

  If you want to keep the 3360... and you have time to experiment... then you can set the 3360 to its original default settings and configure the router from the airport most convenient to connect using DHCP in router Mode of DHCP and NAT.  That will produce what is called a message Double NAT, but maybe it's not of concern on a simple home network, and Apple provides you with the option 'Ignore' the Double NAT, so the airport will display a green light instead a light orange blinking slow.

  You need to try this configuration for a few days to see if the Double NAT will be a problem or not, because it is not possible to predict the effect of a Double NAT on a network... you have to test a few days see how things behave.  If this configuration works well, for you, then you can leave it as what.

  Please note that I do not recommend this type of installation, just suggesting it as an option this work could , if you want to keep the 3360.

  How Double NAT affect IPv6, I can't tell, since I did not use att for several years, and I'm not familiar with their implementation. On wired, IPv6 works fine on the airport with Comcast and Time Warner.  We can provide these parameters for you if want, but have no idea how well... (or if)... they will work with ATT.

  If the installation of Double NAT does not work, your best option would be to go there and get a modem/router or gateway to ATT device and then set up the most convenient airport in Bridge Mode works correctly with the modem/router ATT.  You will turn on the routing of ATT function in this type of installation, but the airport can also produce a signal from the wireless network that you can use.  The modem/router ATT will also provide a wireless signal that you could use for guests, or disable the feature, if you do not need two wireless networks.

  This may also be the best option if you want to configure IPv6 as IPv6 of ATT service must be compatible with the modems/routers and gateways.

• Want to connect Motorola Razr Equium A100

  Can anyone help?, I want to connect my Toshiba Equium A100 for bluetooth internevia and my Motorola Razr but can not find the drivers etc, where can I get these?

  Hello, Robert

  First, you must be sure that your laptop is BT or not. Each notebook with BT has a label of BT on the background site. Check it out at first. Later, we can continue to debate how to connect your mobile phone with Equium A100.

  http://APS.toshiba-tro.de/Bluetooth/pages/FAQ/bluetoothnotworking.html

• Portege 4010 Bluetooth - connection for samsung and motorola phones probs

  I have a portege 4010 with bluetooth. I am trying to connect to our two phones - a samsung sgh-e370 (newish) and a motorola V600 (2 years). Both have BT I downloaded and installed the latest Tosh BT stack (4.0.something). Shows Device Manager four drivers of tosh in BT - all are OK. I have allowed the discovery and allow the connection on the tosh. I did the same thing on the phones. When I run the "Add new connection" Wizard on tosh, he finds two phones and they appear under the devices section in BT Manager with the names I gave them on real phones. However, neither picked up phone tosh and showed no tosh by asking the numbers of pins on the phones.

  The net result is I now two phones display in BT Manager, but if I click on is and choose use log I recover the error "connection failed".

  If I try to find the portege using the phone, the samsung it is but motorola doesn't have. I can't get the motorola to twin with the tosh - it just says "unable to pair up with the portege.

  Any help gratefully received.

  RJ

  Hello

  I don't really know what is the problem in your case, but I did this a few times with my Motorola RAZR V3 and it works fantastic. The whole was finished for 1 minute. I hope that you do it in the right order, but I am writing to you the steps I did:

  1 activate the Bluetooth using the FN + F8 key combination
  2. install the new hardware if necessary (some of them)
  3. start the Bluetooth stack
  4 turn on the Bluetooth on the mobile phone (discoverable)

  5. Select the Express mode > next
  6. choose visible device listed in 'Bluetooth device list' > next
  7 choose to identify passkey (1234)
  8. Enter the key in the mobile phone. Twinning will be success

  I did it on this path, and now I can send all documents in my Tecra. If you want to use as a modem, you must do this:

  1. after peeling going on Next and configure the internet connection
  (provider number) > finish
  2. the new connection will be created in the Bluetooth stack utility
  3. you can start the numbering with double click or click with the right button of the mouse and choose 'connect '.

• Motorola Milestone does not connect to the corporate network after updating to Froyo...

  I've updated my Milestone that is the version of Froyo UNITED Arab Emirates yesterday after a long delay, was really excited all night until I've discovered two problems with my wifi.

  The device does not connect to the corporate network, as my office uses EAP 802.1 x and there is no place to enter proxy where my friends using samsung galaxy s (Froyo 2.2) connect to the network and navigate using the wifi settings advanced to enter the proxy in their device.

  Any help? Please, I beg you.

  Hey Ronald, I've updated by upper about the update saying that UNITED Arab Emirates and EGYPT got last week. Don't know if the Saudi version has achieved, you have the Saudi Version or is it the same in the UNITED Arab Emirates. If his UNITED Arab Emirates you can do it via the PC using Software updater by Motorola...

• HP Officejet 4620:4620 will connect to the motorola sbg6580, IP address but cannot be contacted (?)

  Got a new router/Modem/wireless to Motorola. Follow the instructions in HP, used a PIN, set up a new customer in the Web page of the router... violates ' affect connection. IP address displays on the HP screen, wireless light is solid.

  But I don't see the printer in my network even if sharing is implemented.

  When I send a test page, he's not going thru.

  Troubleshooting report:

  Problems found

  Hello @gracesten.

  Welcome to the HP community!

  I understand that you are having some difficulties to configure your HP Officejet 4620 eAll-in-one printer to print wirelessly with your new Motorola SBG6580 router and your computer Windows 8. I want to help you with this.

  You mentioned that your printer is getting an IP address. If the IP address starts with 169.254.X.X then the printer is unable to connect and has assigned this IP address on its own.

  The easiest way to configure the printer wireless, is to follow the impulse of software. In this way, the printer is currently Setup on the network using the computer's network settings. Did you install the full software functionality for you printer? If not you can download it here: HP Officejet full feature software and driver.

  Here is a step by step guide how to use the software to set up your printer using the HP software: Setup the printer to a wireless network for the HP Officejet 4620 e-all-in-one HP Deskjet Ink Advantage 4620 e-all-in-one printer series

  Please reply to let me know if this works for you, and if there is anything else I can do to help!

  

• Was able to pair headset Motorola S9 with Dell XPS 15, but cannot establish a connection.

  Keeps giving me the error code. The computer has stored the S9 in the device section, but when I try to connect with it I get an error code. "None of the available services or remote device connection failure. Please check the connection to the remote device and make sure that it supports the services required. "I removed the S9 and began more than twice, but still can not past this error message! What gives.

  Hello

  ·         What operating system do you use?

  ·         Did you try to connect the device to the other computer and check if it helps?

  Method 1:

  To work around this problem, follow these steps:

  To do this, in Windows Vista and Windows 7, click Start collapse this includes this image, type services.msc in the Search box, and then click Services in the programs list.

  Reduce this includes this imageIf you are prompted for an administrator password or a confirmation, type the password or click continue.

  To open the snap-in Microsoft Management Console (MMC) for Services in Windows XP, click Start, click run, type services.mscand click OK.

  (a) double-click the Bluetooth Support service.

  (b) if the Bluetooth Support service is stopped, click Start.

  (c) in the list Startup type , click Automatic.

  (d) click the log .

  (e) click Local System account.

  (f) click OK.

  (g) If you are prompted to restart the computer, click Yes.

  Method 2:

  Also check out the link below and check to see if it helps.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices

  You can also try to contact the Motorola Support for assistance.

  http://www.Motorola.com/support/us-en/consumer-support/accessories/S9_Default_Support_Loc%253AUS-en#

• Whenever I connect my Motorola Atrix to the PC, Windows XP closes and the PC freezes

  Original title: Smartphone closes windows

  Whenever I connect my Motorola Atrix to the PC, Windows XP closes and the PC freezes. Does anyone else have this experience.  The connection works fine on my laptop.

  Hi patsatrix,

  1. When did you start to question?

  2. you remember to make changes to the computer before this problem?

  3. This occurs when you connect other USB devices also?

  You can try to configure the computer so that it starts cleanboot and check if it helps.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353/en-us

  Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.

  Hope this information is useful.

• Impossible to establish a connection between microsoft router, modem, motorola and dell/windows xp computer

  I have not set up a connection between my computer dell/windows XP, Microsoft router and my Motorola modem. After reading the instructions for the router and set up like it says anything I've set up my computer say it is connected but is not really plugged. My ipod says that there is this WiFi but when I try to access the internet on it, it gives me a message saying "unable to connect to the internet, there no connection detected." The only time where I have Internet on my computer is when I unplug the Ethernet to the router and modem and have the modem only connected to one computer. This problem is can cause because my modem is configured with a cable from cox and not connected to a phone cord? (My router is a Microsoft Broadband networking Base station wireless MODEL: MN-500) (My modem is a modem cable Motorola surfboard implemented with internet helmsman) (My computer a DELL Dimension E521 with a windows XP service pack)

  SP3 is on it? Wireless is enabled on the router? Try this