Mounting of full 360 ° panoramas and 'protect the borders. "

Similar Questions

• Questions of Orbi and protect the nests.

  I use Orbi for a few weeks and so far no problem. Until today, when I realized my nest protection (fire alarm) is not connected to the network.
  I did a full reset on the nest, I could see the network 'nest' on my list of wifi on my iPhone, but it expires then said I have no network at home. And I do. Given that everything else works.
  Technical support nest is quite usuless. They will tell me just that Orbi isn't on the list not supported. (Because they don't know what it is).
  Any ideas?
  PS: I am connected through Fios.

  I'll answer my own question, as I understand the problem.

  For some reason, nest the deletion of your account and resseting it does not work. It will not be conn ct to Orbi. But a factory reset did the trick.

  To do a factory reset on nest protect so it does not work with Orbi, just hold the home button until it turns blue. Continue to hold until the NEST begins to tell you it's serial number. Release the button before nest is done reading. You will be asked to redo a complete set, and with the large network of Orbi, it worked like a charm.

• With instant full VM LUN and now the virtual machine will not start or register

  Hello

  I have a case here, where we have a virtual machine that quickly filled the logic unit number and the snapshot is currently 110 GB. It is now available on the new LUN space, but the VM does not start and he was also addressed as 'unknown' in the viclient. I tried to cancel the registration and check-in again, but he refuses to register. It seems that the snapshot is damaged.

  When you try to save it, I get the following in hostd.log:

  DISKLIB-VMFS: ' / vmfs/volumes/48be6db3-f04f46d1-d765-001f2959edbb/AXAPTA/AXAPTA-flat.vmdk ': (17) successfully opened size = 48348147712, hd = 0. Type 3

  DISKLIB-VMFS: ' / vmfs/volumes/48be6db3-f04f46d1-d765-001f2959edbb/AXAPTA/AXAPTA-flat.vmdk ': open with success (21) size = 48348147712, hd = 0. Type 3

  DISKLIB-VMFS: ' / vmfs/volumes/48be6db3-f04f46d1-d765-001f2959edbb/AXAPTA/AXAPTA-flat.vmdk ': closed.

  DISKLIB-VMFS: ' / vmfs/volumes/48be6db3-f04f46d1-d765-001f2959edbb/AXAPTA/AXAPTA-flat.vmdk ': closed.

  DISKLIB-VMFS: ' / vmfs/volumes/48be6db3-f04f46d1-d765-001f2959edbb/AXAPTA/AXAPTA_1-flat.vmdk ': (17) successfully opened size = 214764819456, hd = 0. Type 3

  DISKLIB-VMFS: ' / vmfs/volumes/48be6db3-f04f46d1-d765-001f2959edbb/AXAPTA/AXAPTA_1-flat.vmdk ': open with success (21) size = 214764819456, hd = 0. Type 3

  DISKLIB-VMFS: ' / vmfs/volumes/48be6db3-f04f46d1-d765-001f2959edbb/AXAPTA/AXAPTA_1-flat.vmdk ': closed.

  DISKLIB-VMFS: ' / vmfs/volumes/48be6db3-f04f46d1-d765-001f2959edbb/AXAPTA/AXAPTA_1-flat.vmdk ': closed.

  DISKLIB-LINK: ' / vmfs/volumes/48be6db3-f04f46d1-d765-001f2959edbb/AXAPTA/AXAPTA_1-000001-delta.vmdk ': cannot open (the specified file is not a virtual disk).

  DISKLIB-STRING: ' / vmfs/volumes/48be6db3-f04f46d1-d765-001f2959edbb/AXAPTA/AXAPTA_1-000001-delta.vmdk ': cannot open (the specified file is not a virtual disk).

  DISKLIB-LIB: unable to open ' / vmfs/volumes/48be6db3-f04f46d1-d765-001f2959edbb/AXAPTA/AXAPTA_1-000001-delta.vmdk ' with flags 0 x 11 (the specified file is not a virtual disk).

  DISKLIB-VMFS: ' / vmfs/volumes/48be6db3-f04f46d1-d765-001f2959edbb/AXAPTA/AXAPTA_1-000002-delta.vmdk ': (17) successfully opened size = 214764819456, hd = 0. Type 8

  DISKLIB-VMFS: ' / vmfs/volumes/48be6db3-f04f46d1-d765-001f2959edbb/AXAPTA/AXAPTA_1-000002-delta.vmdk ': open with success (21) size = 214764819456, hd = 0. Type 8

  DISKLIB-VMFS: ' / vmfs/volumes/48be6db3-f04f46d1-d765-001f2959edbb/AXAPTA/AXAPTA_1-000002-delta.vmdk ': closed.

  DISKLIB-VMFS: ' / vmfs/volumes/48be6db3-f04f46d1-d765-001f2959edbb/AXAPTA/AXAPTA_1-000002-delta.vmdk ': closed.

  DISKLIB-VMFS: ' / vmfs/volumes/48be6db3-f04f46d1-d765-001f2959edbb/AXAPTA/AXAPTA_1-000001-delta.vmdk ': (17) successfully opened size = 214764819456, hd = 0. Type 8

  DISKLIB-VMFS: ' / vmfs/volumes/48be6db3-f04f46d1-d765-001f2959edbb/AXAPTA/AXAPTA_1-000001-delta.vmdk ': open with success (21) size = 214764819456, hd = 0. Type 8

  DISKLIB-VMFS: ' / vmfs/volumes/48be6db3-f04f46d1-d765-001f2959edbb/AXAPTA/AXAPTA_1-000001-delta.vmdk ': closed.

  DISKLIB-VMFS: ' / vmfs/volumes/48be6db3-f04f46d1-d765-001f2959edbb/AXAPTA/AXAPTA_1-000001-delta.vmdk ': closed.

  DISKLIB-LINK: ' / vmfs/volumes/48be6db3-f04f46d1-d765-001f2959edbb/AXAPTA/AXAPTA_1-000002-delta.vmdk ': cannot open (the specified file is not a virtual disk).

  DISKLIB-STRING: ' / vmfs/volumes/48be6db3-f04f46d1-d765-001f2959edbb/AXAPTA/AXAPTA_1-000002-delta.vmdk ': cannot open (the specified file is not a virtual disk).

  DISKLIB-LIB: unable to open ' / vmfs/volumes/48be6db3-f04f46d1-d765-001f2959edbb/AXAPTA/AXAPTA_1-000002-delta.vmdk ' with flags 0 x 11 (the specified file is not a virtual disk).

  Referred to as registry: AXAPTA/AXAPTA.vmx

  Vmsvc indicates file is loaded, by: /vmfs/volumes/48be6db3-f04f46d1-d765-001f2959edbb/AXAPTA/AXAPTA.vmx

  I also tried to copy virtual machines directory down to a local PC and run via VMware Converter, but I get the message "the source VMware Consolidated Backup"filename.vmx"has a missing catalog file.

  1. VMware - v

  VMware ESX Server 3.5.0 build-130756

  Any help is appreciated.

  Lars

  The problem (according to the newspaper) is AXAPTA_1-000001 - delta.vmdk no AXAPTA_1-000002 - delta.vmdk (the error on the second snapshot is probably because of the broken parent snapshot).

  The descriptors are ok, which means that the VMDK itself is broken.

  If you do not have a backup, you can try the following:

  -Copy the files in another data store

  -change the second snapshot descriptor to point to the basedisk as the parent

  -Try and mount the drive

  -If you're lucky, you should be able to recover at least some data of

  -If the disklib is complaining again then the two snapshots are broken - which is unlikely

  Depending on how old the second snapshot (the older one is better it is) the method above will not help.

• Protect the blackBerry Smartphones BB and device password

  I just read a message on a stolen blackberry, and protect the response of BB, it's something all ready on the phone or you have to load it down, and you can also protect your device with a password that you need to enter it every time you have the keyboard loacked and enough when you activated your phone market?

  Hi flossyatk,

  Please take a look at the Blackberry Bold 9900 through the user guide, hopefully it will help a lot, also have a look at How to maximize the battery life and available memory on the BlackBerry smartphone .

  Good luck

  Prince

  Click 'Like' If you want to thank someone.

  If problem resolves mark message (s) as a 'Solution', so that others can use.

• Acrobat DC, protect the contents of a PPT docucument I have to publish.

  Hi, I bought Acrobat reader DC because I need to protect the contents of a PPT docucument I need to publish. Red blood cells saved, I Don t have all options to protect the content. I appreciate your help

  With Adobe Acrobat Pro, you can convert PPT to PDF and protect the PDF file.

• data and loading the script sale scheme

  Hello
  I'm learning OBIEE on mine. I managed to install oracle XE and OBIEE 10 g. I need a script to create a new db schema and load the dirty tables with sample data to create reports. can someone help me with scripts?

  Yes, I confirmed that only one Enterprise for Oracle Db edition has the SH schema enabled during installation... you can't have the SH schema without this feature which is ONLY on the Enterprise Edition.

  Here is the article: http://www.dba-oracle.com/t_callan_schema_bye_scott.htm

  Please install the full Enterprise edition and select the SEED DB on install. You will have the sh schema

  If it was OK, please mark as correct.

• While I'm trying to remove the MPEG-4 file, it says "make sure that the disk is not full or write protected and that the file is not currently in use.

  Original title: When I'm trying to delete file MPEG4, is not deletion. How can I delete file MPEG4?

  While I'm trying to remove the MPEG-4 file, it says "make sure that the disk is not full or write protected and that the file is not currently in use.

  Hello
   
  Method 1: Ownership of the file and then try to delete and see if that helps.
  Reference:
  How to capture a file or a folder in Windows XP
  http://support.Microsoft.com/kb/308421
  Method 2:
   
  Error message when you try to delete a file in Windows XP: "access denied".

  http://support.Microsoft.com/kb/298345

• I need to remove the uneeded files: Purenetworks and PCFix. But I get: not deletenmrsrc.dll: access denied make sure the disk is not full or write protected and that the file is not in use.

  Original title: remove unnecessary files

  I need to remove the uneeded files: Purenetworks and PCFix. But I get: not deletenmrsrc.dll: access denied make sure the disk is not full or write protected and that the file is not in use.

  Ditto for PCFIX.exe.

  How can I remove these and clean unnecessary files? Thank you.

  Hello

  1. how exactly you are trying to remove it?
  2 have you connected the administrator account?

  Step 1: Check if the problem persists in the clean boot state.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. click on start and then click Run.

  2. type msconfig and click OK.

  The System Configuration Utility dialog box appears.

  3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.

  4. When prompted, click on restart to restart the computer.

  Step 2: Take possession of these program at the following location folder, and then check the issue. C:\Program Files\ 

  Reference: How is ownership of a file or a folder in Windows XP

• "Impossible to copy the name of the file: access is denied." Make sure that the disk is not full or write protected and that the file is not currently in use. »

  I move the data because a Trojan horse snuck in.  I killed the Trojan horse by setting the drive as external and scanning.  However, I could no longer connect to the formerly infected drive. It hangs at the Welcome screen.  So I load XP Pro on another drive and set the old drive as external. I now see data, but get the "Access denied" message that will let me copy the data.

  Or I have to be able to release the data to the new drive or access the old disk by booting to XP.  Now I can't do either.

  I tried to get XP on the old drive, but the Trojan horse seems to have changed the password admin. I then tried to erase the password using a Linux boot disk and it showed the account unlocked, but I always block to the Welcome screen.

  Ideas appreciated.  I can't move forward until I can get the data off. THX K.

  Karen Girrl
  Thanks for posting with us.  The article below describes taking possession of folders\files.  You may need to go through these steps, if malicious software has modified the permissions on your old drive.
  http://support.Microsoft.com/kb/308421

  Let us know the results. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How can I add a video clip in the vertical hole above my 360 panoramic video?

  Howdy.  I have a video camera that makes panoramas at 360 degrees in full motion; the field of view is 360 degrees horizontally, by about 15 degrees above the horizontal plane and about 55 degrees below the plane.  When I discovered this video in PP or 360 YouTube, I can see a coil of torus on the POV, horizontally and black space directly above and below the POV.  Now, I would like to add video in this black space - but when I try to shoot a video in the source viewer, video gets stuck on one end and wraps completely around the POV (as the panorama does when it is not running).  How can I put a video element (or both) the holes in the top and bottom black and remains "flat" or unpinched?  Copied_tilt.zip - Google Drive

  Hi dede,.

  Premiere Pro can display only the content of the RV, not create it. I think that you need an app that sews VR videos like this one: Kolor | Autopano Video - Video software

  We will hear what the community has to say.

  Thank you

  Regalo

• MCAFEE VS. NORTON 360 TO PROTECT THE VISTA OPERATING SYSTEM

  I have a Qosimio Toshiba computer and it came with trend Anitvirus software for the first year. I have the Vista operating system. I want to either update Mcafee or Norton 360. What is the best for my computer and do I uninstall the antivirus software of original Trend before or after the installation of the new software, and how do I do?

  Hello

  Frankly, I would not use all three, and never you have on the machine now that you must
  Delete (so you have only a major antivirus on the system) do not forget to use the removal of their creator tools
  or anyone who can leave problems using scraps.

  Download replacements, but do not install until after the removal of those present and restart.

  For any need to use this method:

  Download - SAVE - go to where you put it-click on - RUN AS ADMIN

  Instructions/TrendMicro removal tool
  http://eSupport.trendmicro.com/1/How-do-I-remove-old-or-new-versions-of-trend-micro-products-in-my-comp.aspx

  How can I uninstall my Trend Micro program removal tools fail?
  http://eSupport.trendmicro.com/pages/how-do-I-uninstall-my-trend-micro-home-and-Home-Office-program-if-the.aspx

  ========================================================

  Here's what I use and recommend: (all are free and offer exceptional protection)

  Avast and Prevx proved extremely reliable and compatible with everything I threw at them.
  Microsoft Security Essentials and Prevx have also proven very reliable and compatible.

  Avast Home free - stop any shields is not necessary except away from Standard, Web and network is working.

  Prevx - Home - free

  Windows Firewall

  Windows Defender (is not necessary if you use MSE)

  Protected IE - mode

  IE 8 - SmartScreen filter WE (IE 7 phishing filter)

  I also IE always start with asset if filter InPrivate IE 8.
  (Sometimes you have to temporarily turn off with the little icon to the left of the + bottom right of IE)

  Avast - stop home - free - all shields you do no need except leave Standard, Web and network running.
  (Double-click the blue icon - details look OK. - upper left Shields - those that you do not cancel).
  http://www.avast.com/eng/avast_4_home.html

  Or use Microsoft Security Essentials - free
  http://www.Microsoft.com/Security_Essentials/

  Prevx works well alongside MSE or Avast

  Prevx - Home - small, fast, exceptional CLOUD free protection, working with other security programs. It comes
  a scan only, VERY EFFICIENT, if it finds something to come back here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  PCmag - Prevx - Editor's choice
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Also get Malwarebytes - free - use as scanner only. If you ever suspect malware, and that would be unusual with
  Avast and Prevx running except a low occasional (not much), updated cookie and then run it as
  a scanner. I have a lot of scanners and they never find anything of note that I started to use this configuration.

  http://www.Malwarebytes.org/

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• What photoshop is for beginners and not the expensive full version?

  What photoshop is for beginners and not the expensive full version?

  Depending on what you want to achieve, there are also 4 of Lightroom.

  Comparing CS6, Lightroom and elements, Adobe says:

  Q:  How Adobe Photoshop, Photoshop Extended, Photoshop Elements, and different software Photoshop Lightroom?

  A: Photoshop Elements 11 (US$ 99) is designed for those who is just getting started with digital photo and editing book powerful yet easy to use options that help you to organize, edit, create, share and protect your personal photos.

  Photoshop CS6 (US$ 699) is the professional standard to create and manipulate powerful images and Photoshop CS6 Extended (US$ 999) offer everything in Photoshop as well as tools for creating and editing objects and images in 3D.

  Photoshop Lightroom 4 (US$ 149) meets the needs of workflow of professional and amateur photographers, allowing them to import, process, organize and quickly introduce large quantities of digital photographs or develop a single image.

  And they also have a page that sums up the best uses for each product. This article even more deeply penetrates in the comparison. I hope it's useful!

• Status of the release of 360 Panoramas?

  Creator of superposition of panorama is still not functional for Android?

  As support for embedded HTML 5 Android is a Pandora's box - some compatible (but very limited in function)
  overlay panorama tool would be great for this platform. Is there some special Adobe isn't able to fix it for Android? d support

  Also - about the IPad support - with the recent improvements to CC signs of added support for sound
  / autorotation or similar makes 360 Panoramas much better interactive candy?

  Panoramas are not supported on Android, and there is no change in our support of panorama on iPad with the release of CC.

  Neil

• RMAN and 05500: the auxiliary database must not be mounted when using DUPLICATE

  Hello
  
  Oracle10g2
  RHEL4
  
  The artist DR configuration using RMAN backup.
  
  There are two db Server computers:
  
  1) mac1-> backend
  2) mac2-> backup server
  
  File structure of database as a backup on the server location is the same.
  
  Entry TNSNAME on both servers are perfect, verified using tnsping.
  
  
  Now, to create a backup database.
  
  I made the RMAN backup on mac1 (main server) then transferred backup (full backup directory) to mac2 (backup server)
  
  Then, on the standby server,
  
  -> took on the eve of the database in nomount mode
  --> connected to the target database (i.e. standby db) with RMAN
  -> database connected to auxiliary
  
  But the granting of "Duplicate" command results in the error, as shown below:
  
  RMAN > target database double standby nofilenamecheck dorecover;
  
  RMAN-05502: the target database must be mounted on the issue of a duplicate order
  
  and when I put the target database (standby db) in the editing mode, gives the error below:
  
  RMAN and 05500: the auxiliary database must not be mounted on the issue of a duplicate order
  
  where I did mistake? How to solve this problem?
  
  
  Concerning

  Hello

  There is nothing wrong

  target (in fact the Pb of the source) must be mounted
  auxiliary (actually the destination db) can not be mounted.

  These messages refers to the source and destination db. from 11 g, you can duplicate opensource db (a.k.a. target)

  P.

• Reduce the buttons and full-screen are missing since the upgrade to Windows 10.

  Shortly after I installed Windows 10, Restore Down/Full screen minimize and close buttons are gone. I reinstalled FF, but they aren't there yet.

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes