Questions of Orbi and protect the nests.

Similar Questions

• Mounting of full 360 ° panoramas and 'protect the borders. "

  Hello

  I'm trying to optimize panoramas 360 ° from my camera Ricoh Theta S in Lightroom CC panorama.

  The problem with the images developed is a visible border/edge/line meeting between the left and the right border of the plain jpg. It's cause visible only when viewing the pano transformed in software or on a Web site. It looks like this:

  

  Is there a possibility to 'protect' the borders in some way when editing? Or y at - there a way to tell Lightroom manages a 360 ° panorama?

  I couldn't find an answer in the web. You always get tutorials for merging of the images for a pano, but never to Edit an already merged panorama, full.

  Thanks a lot for your help

  Christian

  If you want to change the panoramas at 360 degrees (I do a lot of those and like to post them on google maps) in Lightroom the cardinal rule is not to touch highlights, shadows, white, black, and clarity. Those are HDR tools that don't know how to wrap themselves around. You can use the tone curve. You can also make local changes, as long as you do not change the left and right border. You can also make filters graduate as long as you make it perfectly horizontal. Here is an example of a spherical pano I made final edits on in Lightroom: Google Maps. There is a graduated filter in the middle that I edited a bit by using brushes. My workflow for these is very involved, but most of the changes occur in Lightroom after stitching.

• Questions on "configure and start the server process" step during the r12 upgrade

  There is a not listed in the 11i 12.1.1 to upgrade guide, 'the Server Configure and start processes. It looks like to includes two parts, run autoconfig tire to the database and run the quick installation of second time.

  so I have two questions here:

  1. looks like the quick second installation is just autoconfig, so can I just run autoconfig instead of the second quick installation?

  2. that we'll first? automatic configuration in the database or quick installation service?

  Thank you

  1. looks like the quick second installation is just autoconfig, so can I just run autoconfig instead of the second quick installation?

  AutoConfig will not start the services so I'd run fast install and it should run the automatic configuration for you.

  2. that we'll first? automatic configuration in the database or quick installation service?

  Quick installation.

  Thank you

  Hussein

• How make a regular crash with a component source multicam editing and keep the NEST?

  I just want to cut the source multicam in my edit sequence. My edit sequence already has another clip multicam inside. I just want to add a different multicam clip on it. I load the multicam clip in my source as a regular clip monitor, but when I hit edit, it cuts in all the traces of my mulitcam, instead of a track of the nested multicam clip. What I'm missing here? I just avid then maybe that's not really possible? My solution is to drag the clip source multicam tray on the icon of the new, which creates my clip nested within a timeline, copy the nest, then stick in my real Edition. Why so many markets for such a simple thing?

  What version of Premiere Pro are you using? If I understand the behaviour you statement, looks like you have the feature "KEM Roll" (new CC7.0) Insert value and crush Sequnces of the individual Clips. In the case where you do not know what I'm talking about, this feature is controlled by the button most left in the upper left corner of the timeline panel, next to the button magnet (Snap).

  If that is not linked, then maybe some more info on your workflow will help. Start off by explaining how you create your footage making - there are two methods.

• Insert and update the nested table

  Hello
  
  I created a nested table containing the following columns. I need to insert records into the nested table. And also I have to update the nested table. Please find below my table and get error message.
  
  Please advose...!

  SQL> create type details as object(
    2  basic number(7,2),
    3  da number(6,2),
    4  hra number(6,2),
    5  pf number(6,2),
    6  it number(6,2),
    7  gross number(7,2),
    8  ded number(6,2),
    9  net number(8,2));
   10  /
  
  Type created.
  
  SQL> create type details_t is table of details;
    2  /
  
  Type created.
  
  
  SQL> ed
  Wrote file afiedt.buf
  
    1  create table emp_tab(empno number(4),name varchar2(10),details_tab details_t)
    2* nested table details_tab store as empl_details
  SQL> /
  
  Table created.
  
  
  SQL> ed
  Wrote file afiedt.buf
  
    1* insert into emp_tab values(&empno,'&name',details_t(details(&da,&hra,&pf,&it,null,null,null)))
  SQL> /
  Enter value for empno: 1
  Enter value for name: asdf
  Enter value for da: 120
  Enter value for hra: 130
  Enter value for pf: 120
  Enter value for it: 120
  old   1: insert into emp_tab values(&empno,'&name',details_t(details(&da,&hra,&pf,&it,null,null,null
  new   1: insert into emp_tab values(1,'asdf',details_t(details(120,130,120,120,null,null,null)))
  insert into emp_tab values(1,'asdf',details_t(details(120,130,120,120,null,null,null)))
                                               *
  ERROR at line 1:
  ORA-02315: incorrect number of arguments for default constructor

  Can I use '&' while inserting records in the nested table? Yes / No?
  
  I do need to update also net gross, ded, columns... !!
  
  Please help me... !!
  
  Concerning
  A

  $ sqlplus scott/tiger
  
  SQL*Plus: Release 10.2.0.2.0 - Production on Thu Apr 21 16:18:16 2011
  
  Copyright (c) 1982, 2005, Oracle.  All Rights Reserved.
  
  Connected to:
  Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - Production
  With the Partitioning, OLAP and Data Mining options
  
  SQL> CREATE TYPE details AS OBJECT(
   basic NUMBER(7,2),
   da NUMBER(6,2),
   hra NUMBER(6,2),
   pf NUMBER(6,2),
   it NUMBER(6,2),
   gross NUMBER(7,2),
   ded NUMBER(6,2),
   net NUMBER(8,2));  2    3    4    5    6    7    8    9
   10  /
  
  Type created.
  
  SQL> CREATE TYPE details_t IS TABLE OF details;
    2  /
  
  Type created.
  
  SQL> CREATE TABLE emp_tab(empno NUMBER(4),name VARCHAR2(10),details_tab details_t)
   NESTED TABLE details_tab store as empl_details  2
    3  /
  
  Table created.
  
  SQL> INSERT INTO emp_tab VALUES(7001,'Saubhik',details_t(details(100,100,50,10,10,null,null,null)));
  
  1 row created.
  
  SQL> SELECT * FROM TABLE (SELECT details_tab FROM emp_tab WHERE empno=7001);
  
       BASIC         DA        HRA         PF         IT      GROSS        DED
  ---------- ---------- ---------- ---------- ---------- ---------- ----------
         NET
  ----------
         100        100         50         10         10
  
  SQL> ^C
  
  SQL> ed
  Wrote file afiedt.buf
  
    1  UPDATE TABLE (SELECT details_tab FROM emp_tab WHERE empno=7001)
    2     emp_sal
    3*    SET emp_sal.net=emp_sal.basic+emp_sal.da+emp_sal.hra
  SQL> /
  
  1 row updated.
  
  SQL> SELECT * FRM emp_tab;
  SELECT * FRM emp_tab
           *
  ERROR at line 1:
  ORA-00923: FROM keyword not found where expected
  
  SQL> SELECT * FROM emp_tab;
  
       EMPNO NAME
  ---------- ----------
  DETAILS_TAB(BASIC, DA, HRA, PF, IT, GROSS, DED, NET)
  --------------------------------------------------------------------------------
        7001 Saubhik
  DETAILS_T(DETAILS(100, 100, 50, 10, 10, NULL, NULL, 250))
  
  SQL>
  

• Create Styles... and then the nesting styles

  Seems simple enough:

  say application "Adobe InDesign CS5.5.

  say active document

  put myCharacterStyle to do style of characters with properties {name: 'Year', size: 26.0, fill color: 'Paper', race color: 'Black', race weight: 0.75, fonts: "Helvetica" font style: "Black"}

  put myCharacterStyle to do style of characters with properties {name: "Years", size: 18.0, fill color: 'Black', line color:nothing, weight:race nothing, horizontal scale: 80.0, vertical scale: 80.0, fonts: "Helvetica", font style: "Black"}

  put myParagraphStyle to do paragraph style with property {name: 'Year'}

  put nested styles of myParagraphStyle to {{applied the character style: 'Year', rehearsal: 1, false inclusive: delimiter:any word}, {applied the character style: "Years", rehearsal: 2, inclusive true: delimiter:any word}}

  end tell

  end tell

  The police and the point size do not come through when the style is created. Nested styles are not as through.

  I tried the applied policies: "Helvetica" to get "font family is not available. Also: font 'Helvetica '...

  What I get just now I is no defined font or size. The rest works.

  So what I'm doing wrong here?

  
  

  Hi lithodora.

  as Mary Posner wrote a character style has the property 'do', but 'applied police' and 'make-style ".

  «... specified as font family name or an object are.»

  just look it up in the dictionary...

  Always try to work with references.

  Tell application "Adobe InDesign CS5.5"

  -You need to myHelvetica your needs!

  Set myHelveticas to (font family of each font whose name contains "Helvetica") - returns the helvetica font family names

  myHelvetica defined in article 1 of the myHelveticas - just choose randomly one for my example, in the hope there is a 'black' style ;-)...

  tell the active document

  myCharacterStyle01 to style character with the properties the value {name: 'test', size: 26.0, fill color: 'Paper', race color: 'Black', accident stroke weight: 0.75, applied the police: myHelvetica, font style: "Black"}

  myCharacterStyle02 to style character with the property value {name: 'tests', size: 18.0, fill color: 'Black', race color: nothing, stroke cerebral weight: nothing, horizontal scale: 80.0 vertical scale: 80.0, applied the police: myHelvetica, font style: "Black"}

  myParagraphStyle to style of paragraph with the properties the value {name: 'nextTest'}

  say myParagraphStyle

  do new style nested with properties {applied the character style: myCharacterStyle01, repetition: 1, included: false, delimiter: any word}

  do new style nested with properties {applied the character style: myCharacterStyle02, repeat: 2, inclusively: true, delimiter: any word}

  tell the end

  tell the end

  tell the end

  
  

• Protect the blackBerry Smartphones BB and device password

  I just read a message on a stolen blackberry, and protect the response of BB, it's something all ready on the phone or you have to load it down, and you can also protect your device with a password that you need to enter it every time you have the keyboard loacked and enough when you activated your phone market?

  Hi flossyatk,

  Please take a look at the Blackberry Bold 9900 through the user guide, hopefully it will help a lot, also have a look at How to maximize the battery life and available memory on the BlackBerry smartphone .

  Good luck

  Prince

  Click 'Like' If you want to thank someone.

  If problem resolves mark message (s) as a 'Solution', so that others can use.

• Acrobat DC, protect the contents of a PPT docucument I have to publish.

  Hi, I bought Acrobat reader DC because I need to protect the contents of a PPT docucument I need to publish. Red blood cells saved, I Don t have all options to protect the content. I appreciate your help

  With Adobe Acrobat Pro, you can convert PPT to PDF and protect the PDF file.

• Question of Safari and Chrome. indicates on the navigation screen. "An element of the Protection of the family filter does not work as expected. Restart your computer. If the problem persists, contact support.  Error: failed to hose CPI. »

  Question of Safari and Chrome. indicates on the navigation screen. "An element of the Protection of the family filter does not work as expected. Restart your computer. If the problem persists, contact support.  Error: failed to hose CPI. »

  Quit Safari, Chrome to quit smoking. If necessary Forcequit.

  Start Safari while holding the SHIFT key, select the menu Safari ClearHistory, then after this check that the homepage is the one you want.

  Do the same for Chrome.

  Close all browsers, restart the mac.

• System Restore - question: the computer is not protected. Restart the computer and restoring the system running again. "

  When I run the SYSTEM restore, I get the following message: "the computer is not protected. Restart the computer and restoring the system running again. "I already did and it does not help.  I have Dell Windows XP

  Hello

  Try this link it may be useful you http://www.kellys-korner-xp.com/xp_restore.htm

  Under the heading, enable and disable the system restore... Reg fix?

  Also, it wouldn't hurt to run for malware, spyware, etc...

  Concerning

  GT4U

• Process * \MCSHIELD. EXE the nest (428) contained code signed or corrupted and could not perform an operation with a McAfee driver.

  XP SP3 system

  I get warnings like this when Mcafee updates.

  Process * \MCSHIELD. EXE the nest (428) contained code signed or corrupted and could not perform an operation with a McAfee driver.

  Process * \SVCHOST. EXE the nest (1632) contained code signed or corrupted and could not perform an operation with a McAfee driver.

  Is this a problem Microsoft or Mcafee?

  Do I need to fix?

  In the McAfee forums, there are several similar positions such as:

  https://community.McAfee.com/message/241542

  I'll sue your question on in their community, as they already seem to know about it.

  I would also say that, unless you are very fond of McAfee or you are forced to use it, you plan to replace it with something that has a smaller footprint, uses less resources and doesn't have these problems - something like Microsoft Security Essentials, you can get here:

  http://Windows.Microsoft.com/en-us/Windows/Security-Essentials-download

  MSE completed with the free version of MBAM and SAS should permanently keep your clean enough unless you're a daredevil like me:

  Download, install, update and do a quick scan with these free malware detection programs (not at the same time) and remove all threats:

  Malwarebytes (MMFA): http://www.malwarebytes.org/products/malwarebytes_free
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  SAS will probably report a lot of tracking cookies and you can just let him delete them.

  Even if you keep McAfee, I always supplement it with MBAM and SAS since no single AV program does seem to know everything.  If your McAfee of your system is clean, I would interpret that means - McAfee found nothing, says he knows.  It is prudent to use more than a reputable scanner to get more coverage.

  If you choose to spend (and you can't have both at the same time), you must be sure to use the uninstaller that you can get from here:

  http://service.McAfee.com/FAQDocument.aspx?LC=1033&ID=TS101331

  Your system will give you better performance.

• 2 available drives on the points of RECOVERY and OS (C) of the system and restore the protection settings

  Greetings! I am very confused and need help. Looking for just my restore points.

  I am interested in the protection of the system, I clicked on the system protection and under the protection option I

  available from 2 discs on protection RECOVERY settings (it looks like folder sign) and OS (c :)) system)

  Protection of RECOVERY: off

  OPERATING SYSTEM (C :)) System Protection is enabled. I clicked on configure I activated the setting to restore system and previous version of the files. Maximum use of 2% (10,00 GB), use current 962,89 MB

  Now, my question is this, if recovery protection be ON? When I click on configure, check "turn off system protection"

  What is the right configuration? Help, please. I hope I'm not confusing you either.

  No, do not turn on System Protection for the system recovery disk. Which is locked and should only be used when you need to do a factory restore (that reinstalls the operating system). Just keep the System Restore enabled for the system partition on which your Windows installation exist. Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• Columns of the nested Table and ADF BC 11.1.2

  I think coming to a new conception of the application, including a redesign of the database. In this application, there are users who cannot change tables of production directly, but their amendments must be approved (and possibly modified) before applying them to production tables. The production tables are part of an existing system and are fairly well standardized, with a main table and several paintings of detail.
  
  So for the new design, I want to have a table intermediate, mirrored in the main table, where the user's changes are stored until they are approved and applied to the production tables. The intermediate table contains some additional columns for the user "add, change or delete", who supported the change, the date modified is requested. After you apply the change, the intermediate folder must be copied in a historic change and deleted from the staging table. In this way, the intermediate table is never a lot of data in it.
  
  Here's the question:
  I need to treat the tables in detail. I could have staged versions of each table in detail, but I thought it might be easier to manage if detail tables have been included in table nested table columns main staging area. Most of the detail tables contain only a few rows with rank of master. But ADF BC 11.1.2 can treat the nested table columns? Is it easy to use in an application?

  Hello

  and ADF Faces does support nested tables? lol so even if ADF BC would be, where would you go with this approach? Polymorphic views would be an option (think hard)?

  Frank

• Hi, FCP my, library, was damaged, i, open, drank of the PCF, library and, he, worked, well, then, my, question is, which, do, with, the, old, library,?, is, again, I, working, throughout, with, the, a, used?, or, should, I, open, Abu, one, i used, each, t

  Hi, my, library, has been damaged, so I have, open, a, FCP BU library and this worked well, so my, question, is, what, do, with, the, old, library,?, is, always, workin g throughout, with, a, I have used?, or, well, I have, open, BU, one, i, used, each, times, I, open, my, project?

  Rename your backup library in order to take account of the original, and then delete the original.

  FYI: Identification will facilitate a slightly different name.

  Al

• Hi me Mamadou Moustapha I bought apple that i phone 6s a few days find out who the best phone of the world, because the day I bought it, I had questions on screen and when I went to the service center, they said they're going to update they have updated o

  Hi me yedess apple that i 6 s phone few days back knowing have the best phone in the world since the day I bought that I have questions on screen and when I went to the service centre they said they're going to update, I bought they updated after that I have the same problem now they say they're going to fix very terrible situation for apple this new product which has manufacturing defect they will repair, I asked to change device they deny because they want to fix m single i face the problem of the first day of the customer are powerless and that they only make just crazy.

  It's what warranties are for. If you bought the phone from Apple or an Apple authorized reseller, iPhone, you have 14 days to return it for a refund. After that the Bank should replace the phone. If you did not buy from Apple or a shop authorized, you must respect the terms of this store. However, Apple will always replace the phone, if you contact them directly.