Mouse Logitech keeps freezing.

Similar Questions

• Flex 3 - my mouse cursor keeps freezing!

  I recently bought a Lenovo Flex 3 Lap Top with Windows 10 operating system, and it has been giving me a lot of problems when playing music on itunes. When I opened my itunes and play music my mouse cursor freezes every two seconds. IM become frustrated and think of returning the laptop because I can't fiind a solution can anyone help please? Thank you.

  Mod edit: System model added to the front of the subject line to improve visibility / clarity.

  In response to customer relationships of performance of mouse lagging on Flex 3 14, Flex 3 15 and Yoga 500 laptops running Windows 10, Lenovo released an update the Audio driver, version 6.0.1.7624.

  The updated Audio driver can be downloaded here: http://support.lenovo.com/us/en/downloads/DS104700

  Thank you

• Wired Optical mouse keeps freezing & has no lights

  My wired microsoft optical mouse keeps freezing & the red light turns off. At present, it will work only after first off the entire computer & its reboot. However it only works for a few minutes.  This may be due to my 3 year old grandson disabled showing a lot of interest with small fingers in the below & red lights this afternoon. Bless!  Suggestions please?

  If it flashes on and outside and dies at random... you probably need a new mouse.

  Don't know what has been rough on me pointing out what is obvious.  Direct - Yes.  Probably what you end up doing - Yes.  Rude - I can't.

  So, if I remember, the most expensive computer mouse was about $ 25,000 - yours is * definitely * an inexpensive mouse.  ;-)

  If you want to try something before replace you... Try the mouse on another computer for a few days - it has the same difficulty?  If the answer is Yes - replace it.  If not - you probably been--but try a Different mouse on the computer in question.  Does show the same symptoms?  If so, chances are two things (the latter is more likely): 1) issue software - install the latest motherboard chipset drivers.  (2) USB port bad equipment - try a different USB port and/or get your motherboard extracted for hardware failure.

• Why my (wired) laser mouse keeps freezing every 2-5 seconds and then turns off?

  I use Windows XP Professional SP3, and my (Genius NetScroll G500, USB) mouse keeps freezing every 2-5 seconds, until he "dies" (I can't move or something, it's like off). Sometimes, it works normally, sometimes doesn't. I don't really know what causes to keep freezing. This problem does not occur on Linux for now. I download the new updates, but I do not expect any kind of positive results, so please do not respond with driver update. Could you please tell me what to do to fix it properly? Note that the mouse is brand new, bought today.

  EDIT: It seems that Safe Mode fails.

  Hello

  I suggest you to connect the mouse to another computer if possible, and check if the same problem occurs, this is just to check if it is the problem with the mouse.

• Computer not keeps freezing, no response from the keyboard or mouse, all pages and windows stop loading

  Original title: Vista pc keeps freezing.

  Hello

  My pc keeps freezing, as in no response of the keyboard or mouse, all pages and windows stop loading etc.
  I have to hold the power button to re boot.
  After restarting, it might work correctly for hours or only 2 minutes!
  Seems to be ok in safe mode.
  Any ideas?

  Hi jamesbil,

  Thank you for keeping us posted.

  Method-

  I wish that you uninstall Service Pack 2, and then repeat the repair facility.

  See the article-

  How to uninstall Windows Vista service packs as a troubleshooting step

  http://support.Microsoft.com/kb/948537

  Note: A system restore will undo the changes on the computer. Earlier all applied settings will be lost.

  We know if you need help.

  Thank you.

• My screen keeps freezing same mouse and I have to close my computer and start in safe mode

  Original title: screen freezing same mouse helps getting more frequent

  Hi all my screen keeps freezing same mouse and I have to close my computer and start in safe mode, I have windows vista. its most frequent doing, I tried to look at the error logs and so on, told it could be my macfee product and another said it was critical error id 400? I'm quite beyond my depth, I did scan virus and his watch not that I have nothing. Please help, I am a real novice so please explain as easy as you can, thank you very much

  Ensure that your data is backed up / copied to external media. It seems that your PC has a hardware problem. If it's a name brand PC, for example Dell / HP etc it may have preinstalled utility test read the manual or manufacturer's web site

  If it's a generic PC, then your machine to HD will have a free test bootable utility, for example SeaTools from Seagate

  To test the memory, www.memtest.org

• Got a new Arc Touch mouse, but it keeps freezing, just like the old

  Original title: why do my my arc touch mouse keep freezing. I had a mouse bow before this and that done the same thing. should I buy another brand of mouse?

  Why is my my arc touch mouse keep freezing. I had a mouse bow before this and that done the same thing. should I buy another brand of mouse? It's so frustrating. Nobody seems to have an answer for her. Why make a product that does not work

  Hello

  Have you tried the steps listed in method 2?

  I also suggest you try the mouse in a different computer and check.

  Open the hardware and devices Troubleshooter

  
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  You can also go through the troubleshooting steps on the support of the manufacturer site and check:

  Support:

  http://www.Microsoft.com/hardware/en-us/support

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

  See also:

  Understanding hardware and software for Windows 64 - bit http://windows.microsoft.com/en-US/windows7/understanding-hardware-and-software-for-64-bit-windows

• Logitech bluetooth mouse M557 keep disconnecting

  Just bought a mouse Logitech bluetooth mouse (M557) a few days ago. It was easy to have detected it, however, I realize it loses connection every time that the macbook is left idle for a period of time (a few minutes)... Very annoying, because it seems impossible to reactivate the connection other than logging on my session (or computer reboot) and only then it will reconnect by itself.

  I am also newly on OSX 10.11.3 (I read a few concerns about the Bluetooth under El Capitan...) so I was wondering if the mouse is the problem, or if it is related to OSX.

  Since the price tag on the Logitech is not much lower than the Apple mouse, also I was wondering if I would be more successful with the Apple mouse, I still can return the Logitech at this point...

  Rob

  This seems to be a problem of know-how of logitech, they have a download to try. http://www.gottabemobile.com/2015/10/02/how-to-fix-logitech-mouse-problems-in-os - x-el-capitan / Other that this sometimes reset a stroller can help.  https://support.Apple.com/kb/PH18761?locale=en _

• The mouse keeps freezing while I'm a touch...

  When I play games like minecraft I have to move the cursor, then press the letters, such as a 'W' at the same time, but when I do that the keypad keeps freezing. I also tried game and still the same thng happens...

  Hello

  This problem may be caused by a touchpad setting which is intended to avoid any accidental activation - for example if your Palm brush the touchpad when typing.

  You can change this as follows.

  Open windows control panel and on the top right, next to the display by: select "large icons".  In the new page layout, select the entry of Synaptics.

  The hardware/software version will depend on real option that you're looking for (see the example below), but it is usually called 'check' Palm or Smart Sense'-disable this function and apply the changes.

  

  Kind regards

  DP - K

• Satellite C50D - A - 13 G keeps freezing while watching videos

  My C50D Satellite - A - 13 G keeps freezing while watching videos. Sometimes I am able to move the mouse, sometimes I'm not. In all cases, the laptop is totally insensitive. He is usually fully functional again after 2/3 minutes but sometimes reboots completely.

  Any ideas on what is happening or how to fix this would be appreciated?

  Can you please post some info useful to understand better?
  What operating system do you use?

  Are you using the original OS Hat you got with your laptop?
  Describes issue something of a general problem with playback of the videos (DVD or YouTube)?

  Please write a few sentences about it.

  Busy HARD disk (HARD Drive LED blinking) is when this happen?

• MacBook pro keeps freezing

  My macbook pro (early 2015) has been working great until about a week ago. It started freezing and now it done very often. IM do not receive a beachball, the mouse pointer remains the same. Im having to restart it manually each time by holding down the power button. This problem began only after I have updated to the version OS X EL capitan 10.11.4. 80 GB of free space so I don't think it's a problem.

  All solutions?

  Thank you

  I had this problem too, like many other people (there is several messages and discussions already). Seems to happen more often with Mac in 2015.

  There is nothing to do. I tried a clean install of El Capitan with full SSD erased and 10.11.4 combo update, it did not help; my macbook pro 13 2015 keeps freezing with Safari.

  It is related to Safari or a framework/driver related to the browser.

  Apple has to fix. Just use Firefox or Chrome.

• Satellite L450D keeps freezing randomly

  Hello

  I recently bought a L450D refurbished: Win 7 64 bit, 4 GB ram, 2.1 Ghz AMD dual core, it works much faster than my Toshiba 1 year anyway.

  The problem is, it keeps freezing randomly. When this happens the screen looks like the picture in the link, mouse and keyboard are completely insensitive, but I left it and the battery is flat it beep?

  

  So far I've only updated windows, it is the partition of Toshiba hard disk but f8 during the startup does not seem to do anything and when I tried to write the recovery disc it burned but said unable to end of file during the verification step.

  Any help would be greatly appreciated,
  Thank you
  Dan

  Hello

  Mobile on the photo looks like a problem with a graphics chip.

  Maybe the laptop freezes because of the high temperature of the GPU. What do you think that?

  Have you noticed a higher temperature?

  If Yes, try to clean the cooling fans using a jet of compressed air you should also try an update of the display.

• 13 satellite L50D-B-q: Touchpad keeps freezing

  I bought the laptop above for my wife a little more than a month, and after a few days the touchpad keeps freezing. Sometimes it works, sometimes it doesn't. (currently using an external mouse via USB).

  I tried f5 and f9, but they do not seem to make a big difference. I also downloaded a driver recommended on another forum somewhere, and that seems to work for a week or two. Now, we're back to square one.

  This cannot be good for a new laptop. I have not upgraded to Windows 10 and we do not anticipate doing soon.

  Any help appreciated. The Toshiba page had a guide on turning off, take the battery out and do something with the BIOS, but I don't see how I can take out the battery unscrewing bitless and I don't want to do that.

  Any help is greatly appreciated.

  Thank you
  G

  I have the same problem with the touchpath. Luckely I still have an old mouse, so I am able to restart the computer.

• blue screen - PC keeps freezing upwards and then restarting

  Signature of the problem

  Files helping to describe the problem (some files may be is no longer available)

  Mini091810 - 02.dmp

  SysData. XML

  Version.txt

  Additional information about the problem

  BCCode: 1a

  BCP1: 0000000000005000

  I keep having this problem that my pc keeps freezing and then restart and makes me nuts blue screen appears dumping things then memory dump appears I can't crun my repair for any hope of reason that can help guys

  BCP2: FFFFF70001080010

  BCP3: 0000000001080498

  BCP4: 0000000000014C 48

  OS version: 6_0_6002

  Service Pack: 2_0

  Product: 768_1

  Problem event name: BlueScreen

  The system version: 6.0.6002.2.2.0.768.3

  Locale ID: 2057

  Hello

  To see how to use BlueScreenView and MyEventViewer to troubleshoot the Bluescreens see the
  Methods indicate in this thread - top 3 answers.

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

  -------------------------------------------------------------

  Remove ALL power and reinstall all the memory cards and cables (both ends where possible).
  in fact, remove and replace - don't do not just tight. Make sure that the vents are clear and that the
  the fans are working. Even if the temperature is OK assume no heat does not affect the video,.
  sound or other system functions that it these get hot. Try adding a small fan blowing in
  the vents as a test. (These are especially for a PC not a laptop.)

  Have you recently added any hardware? Have you updated any drivers just before this started?
  (Check control panel - updates of Windows to see if all drivers have been updated it on the)
  This started the time) likely guilty hand are video driver, other great drivers, memory, and
  antivirus/antispyware/security products could be at fault as well as reader questions.

  Use the troubleshooter below and refer to the following message to drivers and memory when
  you get these sections and then back to the resolution of the problems according to the needs.

  BCCode: 1a 0x0000001a<-- read="">
  http://www.faultwire.com/solutions-fatal_error/memory-management-0x0000001A-* 1041.html? order = votes

  -------------------------------------------------------------------------

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard event viewer
  Windows. TIP - Options - Advanced filter allows you to see a time rather
  of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during ' blue screen of the.
  death ' crashes and displays information about all accidents of a table.
  Free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by drivers of old or damaged, in particular the video drivers
  However, there are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
  program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Does not work
  tell all possible driver issues).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• keeps freezing at the monitor

  keeps freezing on my screen. I have to turn off the computer each time. CONTRL Alt, del makes the screen go blank all help

  Hello

  What antivirus/antispyware/security products do you have on the machine? Be one you ALREADY had on this
  machine, including those you have uninstalled (they leave leftovers behind which can cause strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes without doing anything - then right click on the task - bar
  The task manager - take a look at stored by - Services - process - it is a quick reference (if you have
  a small box in the lower-left - show for all users can check only).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG and then display a list of the people here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out what are the files, registry keys and other objects processes have opened, the dll
  they loaded and much more. This exceptionally effective utility will show you even owned by each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to startup automatically when your system boots and you
  opening of session. Autoruns also shows you the full list of registry and file locations where applications can configure auto-
  start the settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  WhatsInStartUP - free - this utility displays the list of all applications that are loaded automatically when Windows
  starts. For each request, the following information is displayed: Startup Type (registry/Startup folder).
  The command - line String, product name, file Version, company name, location in the registry or the file system,
  and much more. It allows you to easily disable or remove unwanted programs that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window Watcher says it all, reporting of any window created by all running programs, if the window is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system. For
  each driver in the list, additional useful information is displayed: load address of the driver, description,.
  version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
  video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
  cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
  own the software and drivers and all other main drivers that you have.

  Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
  (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
  updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

  Always check in the Device Manager - tab drivers version you install actually shows up. This
  because some restore drivers before the most recent is installed (particularly that audio drivers) so install a
  pilot - reboot - check that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.