Mouse USB, connection loss

I have a HPE170F of desktop running Windows 7 Home.  About a week or two ago I noticed that the USB devices are briefly drop their connections.

There are a number of ways, it is the case, but the most common is a slight hiccup in my mouse works.  It is even more obvious and boring everything at stake, there will be a break in the mouse works before returning to normal.

Usually, but not always, accompanyed with the light sensor / on the bottom of the mouse, go to offshore.

That usually doesn't happen until the program and a computer were aired for a while, and it feels like it is becoming more frequent, more I play, and breaks to lie down in the long term.

Sometimes I have to disconnect a USB device and plug it back again so that it can work.

Sometimes, even unplugging / plugging does not work.  Usually when this happens, all USB devices stop working and the computer must be restarted with the power switch.

I tried several mice in different USB ports (front and rear) with no difference.

The USB keyboard and a USB drive have similar traits (the player will suddenly disconnect and reconnect).

I tried with no peripheral USB connected other than the keyboard and mouse.

I went into Device Manager, removed and hubs USB again detected and disabled the option to allow the computer to turn off the devices.  It made no difference.

I have run virus scans, auditor system files and verified that everything is up to date.

Am that I up to this got to be a motherboard problem?

Thanks in advance.

Thanks for the suggestion, but it led naturally to a little problem of chickens and eggs.  This HP desktop computer has only USB (wells and firewire) ports, so at some point during the withdrawal of all USB devices, I eventually remove those for the keyboard and mouse, which means of course I have to restart with the power switch.

I think I can have tracked down the problem, and I think it was a number of things.  I think that my mouse original (the HP base that came with the computer) crumbles.  I don't know why it does this, but my registry contained dozens of entries for my HP mouse (perhaps even one for each time it was unplugged and reconnected).  All entries in mouse are perhaps why the other mice were who have disorders.

I cleaned the registry and I changed to a mouse of difference and so far I have not seen the problem again.

Tags: HP Desktops

Similar Questions

  • Mouse/USB wire connected... [And USB printers]... Function stopped there.

    Apparently without reason... both my USB connected mouse and printer... stopped their service at the same time.  Tried to pull bad problem... with no satisfaction yet.  Does anyone have an idea/and/or where to go from here?  Very frustrating.  A new mouse don't would not solve... something on the system has stopped.          System: Windows Vista... Toshiba laptop... approximately 3 years old/single unit I have right now.

    Hello

    Thanks for posting in the Microsoft Community.

    I don't know it must be frustrating!

    See the following article:

    Tips for solving problems of USB devices:

    http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

    Hope the helps of information. We know if you need help. We will be happy to help you.

  • Auto disable Synaptics Touchpad when USB mouse is connected

    Hello

    Someone at - it an idea how to move again the function "Auto Disable Synaptics Touchpad when USB mouse is connected.  I found an old entry in a forum that referenced changing a setting in the registry hex 33, and implied that this would make the OPTION become visible in the mouse settings in the control panel.  But it just seems to disable the touchpad while. So I guess that Synaptics have changed things since this 'solution' was published in 2009, I think. .

    I have W7 XPS and version 15.3.22.0 for Synaptics Touchpad driver.

    See you soon

    K.

    SOLVED SOLVED SOLVED!

    All - I read through it and many forums and have found no solution. I thought of it on my own, so I'm happy to share with you!

    This solution applies to those who do not have a touchpad disable button F button at the top of your keyboard and have the Synaptics driver which does not show the option to disable the touchpad when the external device is present. This also applies to those where the registry key update does not work (because it didn't for me).

    Here is the solution.

    1. go to the Dell site and get the latest driver for your touchpad. Install it.

    2. Once installed, go into c:\program files\synaptics\syntp in your windows Explorer.

    3. open the program called DellTpad.exe (there is also a DellTouchpad.exe called - do not use this one)

    4. Once opened, click on device settings.

    5 and here the old box is down! Just click to make it active and it works like a charm.

  • Satellite L30-115: does not start when external keyboard and mouse are connected

    My Satellite L30-115 starts when my external keyboard and mouse are connected to PS2 USB adapter.

    Everything is OK, when they are not connected, and they work fine when they are connected after boot.

    Someone has any idea how to solve this problem?

    Hello

    I don't think there is a way to solve this problem. Also, I assume it is the related issue of the BIOS. Is perhaps the time to be up-to-date and use new and compatible equipment. ;)

  • Pavilion series 6, P6 - 2220t: HP Pavilion P6 - 2220t. All security USB connections are turned off in the BIOS. Need to turn it on.

    I was told that all security USB connections is disabled in the BIOS. The only controls for this PC is USB ports for mouse and keyboard control ect.  How can I get into the bios without keyboard and mouse in operation? There is no other way to control this model computer. The only connections on this PC is only the USB connections. Again, if I can get somehow get into the BIOS I can enable security USB connections as it should.

    UPDATE,

    Fixed a problem.

    I have install a market after card bipassing USB bios usb connections.  I went in the BIOS and turned on USB connections. I figured out the EASY DIFFICULTY and solved the problem myself. No other technology needed in this case.

    Very EASY SOLUTION!

    Thank you

  • HP laptop running windows vista family premium does not recognize my HTC Fuze smartphone when I connect it wil a usb connection.

    HP laptop running windows vista family premium does not recognize my HTC Fuze smartphone when I connect it wil a usb connection. I don't quite know what I changed. It allows to work so that I could sync to pc for outlook, etc. Also when I go to the link on the computer to display the drives and devices it does not show the connection. I use window mobile device centery. It says not connected. Thanks for your help.

    When I connect the HTC Fuze phone to the computer, it comes up with a window of synchronization and the phone starts to load.

    Sync Center says not connected and nothing is happening on the computer.

    When I bring mobile glass Center thing it doesn't say not connected to the smartphone.

    I don't see the phone of the link computer to which is connected to the hp laptop.

    the USB port works with my printer.

    What should I try next?   Thanks for your help.

    Hi Bill,

    You can try the following steps and check:

    Method 1:

    Connect the HTC Fuze to the computer, and then run the fixit and see if that makes a difference.

    Automatically, he diagnoses and fixes problems with the hardware. (USB) Keyboard and mouse are not detected by the Manager of devices or when they do not work.

    Method 2:

    If method 1 may not then try the following:

    If you are running Windows Vista 32 - bit, then Uninstall and reinstall the same.

    Microsoft Windows Mobile Device Center 6.1 for Windows Vista (32-bit)

    http://www.Microsoft.com/en-in/Download/details.aspx?ID=14

    If the problem persists, please contact HTC.

    Please post with the State of the question.

  • DV7-4014eo is not displayed when the mouse is connected

    Hello.

    I have a strange problem. DV7-4014eo is not even the post when the mouse is connected (logitech m305). The screen lights up and there is underscore in the top left corner. If the mouse is connected just after the post, everything is fine and it starts.

    Is there a solution

    There has been progress. We tested a different (wired) mouse - that works. I had the chance to delve into the bios. I disabled legacy USB. Now, he can start with the orginal also mouse (logitech m305). Strange.

  • I want to connect my Macbook Air (IOS 10.9.5) with my amp stereo House (TEAC I-501DA), which has a USB connection. I followed the steps described in the manual TEAC to install the driver and my Mac says it is installed correctly, but it does not appear I

    I want to connect my Macbook Air (IOS X 10.9.5) with my amp stereo House (TEAC I-501DA), which has a USB connection. I followed the steps described in the manual TEAC to install the driver and my Mac says it is installed correctly, but it does not appear as an option in the preferences/system sounds.

    Version 1.1.2.2 El Capitan driver support, then why don't upgrade you your MacBook Air to El Capitan?

  • iPhone 6s use usb connections in my car

    6s IiPhone uses usb connections in my car

    iPhone devices no load carrier via the USB Ports of the music player

  • Photosmart C309 printer: change to usb connection

    I currently have a wireless connection to my computer.  How to change that to a USB, wired connection?

    Hey @dac71, welcome to the Forums of HP!

    I understand that you do not want to change to have a wireless connection to a USB connection between the printer and the computer. When you connect a USB cable, the printer automatically installs the correct driver and since you have already paid it works wirelessly, it would be seamless.

    If you're having trouble, and you have a Windows operating system, run the HP print and the doctor Scan with the USB cable connected and it will help: www.hp.com/go/tools.

    If you have a Mac and you need assistance let me know.

    If it meets your needs, please click Accept as Solution button below. If there is anything else I can help make sure you respond back and I will do my best to help!

    See you soon!

  • Why my iphone will have problems with pandora in synchronization with the pandora application on infotainment chevy via a usb connection?

    Why my iphone will have problems with pandora in synchronization with the pandora application on infotainment chevy via a usb connection?

    This was never resolved?  I have the same problem with an iphone 6s.  It is only my phone like an ipod playback.  I don't get the interface of Pandora.

  • Gigashot K40 - USB connection mode lights up when

    Hello.
    I have a camcoder Gigashot K40. When I copied the files on my PC, camcorder battery sat. I connected AC voltage, camcoder and continuous copy operation. After that I disconnected PC camera as usual.
    The problem started when I turned my camera next time. When I turn on camcoder, after 2-3 seconds, it entered in USB connection mode (but without text "Mode high speed USB" on the screen).
    http://img9.imageshack.us/my.php?image=k40m.jpg
    Only way to enter normal mode for recording videos is pushing after lighting camcoder menu.
    I tried to do the soft reset, I pushed the RESET button, I tried to reload the firmware - but it does not help.
    Any ideas? I can solve the problem by myself or must I go to service?

    So soft reset didn't help I really don't know what you can try now.
    Call and ask what the problem is here.

    I thought that the rebate to zero must be the solution when the cam is source of confused.
    Please let us know what they tell you.

  • Satellite A200 - after the mouse USB Vista updates no longer works

    After installing the latest updates Vista (KB938371), I discovered that my mouse USB (Genius Traveler) does not work. I can't restore the system (mistake) and this update cannot be removed. Other (flash disk) USB devices work correctly.

    Could someone help me? Thank you.

    Problem solved, I found this on another forum

    + Hi all, +.

    + I found the solution on another forum (forget which) and published this solution in multiple threads. The problem is, as indicated, a Human Interface Device in combination with update KB938371. After installing it, my usb mouse stopped working. Just go to the--> HID Device Manager - devices--> unknown device and looking for drivers. Vista won't find any drivers online, so you must get the drivers on your computer. The location of the driver (in most cases) will be C:/Windows/Winsxs. You will get a window saying: "this is an unsigned driver blah blah blah". Just install the driver. The mouse worked for me (even without reboot). +

    + OS: Edition Vista Home Premium 64-bit. +

    Dr. +

  • USB connection does not work on my computer for hdr-cx260v

    It is a question (especially) on and off (sometimes). I have worked with Sony and have sometimes succeeded. With the help of the 'extra' 16 GB card works to connect and load. My problem is when I use the video stored in the internal memory and using the usb connection. If/when I ever actually loading the data from the internal memory (I have actually already loaded most, but not the most recent), I intend in the future to use only the memory card "exernal. My most recent appeal of Sony said I have no help since the camery is 2 years and more - they send me an e-mail to a site that gives instructions, but the instructions don't seem to solve my problem. I don't seem to have any connection problem "devices" of my USB ports.

    When I connect the camcorder usb to my desktop (using different connections of USB drive) pc, my computer does not recognize the fittings of the. When I use another card memory USB for same usb connections, the computer recognizes the drive. There have been a few times when the camcorder has acknowledged the connection of the camcorder (most recently on June 12) - but this does not occur at thie time. If I take the memory card 16 GB additional of the camcorder and connect it to the connection of memory card, the computer has always recognized it.

    My problem is trying to get the video from the cameras internal memory via the USB connection.

    I think if/when can I get these loaded files, I have the intention of is no longer using the internal memory of the camera and always use the extra memory card.

    Stone

    I realize that if I could have the laptop recognizes the usb connection, I could manually copy video files myself, even if I think THAT TDC would have also worked in this case.

  • USB connection problem

    Whenever I connect my tab to any PC or laptop using the USB cable, it is not connect. It is not pop window on the USB connection. USB port works fine. Tab gets charged through this property. Functional disorder it is. Everyone will solve it?

    Hello and welcome to the HP support community!

    Need a few details.

    What tablet you are asking about?

    What OS is on your PC?

    Tried another cable?

    Usual suggestion is to unplug the devices and reboot the computer and tablet.  Check the settings of the tablet in storage/settings / < icon options, top right - looks like 3 blocks stacked vertically > / USB connection to the computer.

    See if the PSG is checked.  It is suitable for the transfer of all types of files.  Connect the devices.  If still no joy, try to uncheck MTP and PTP.  This should make the Tablet appear as a camera.

    I had to do with an old Win XP computer so that he can "wake up" and make the connection.  I then switched to the PSG and all was good!

    WyreNut

Maybe you are looking for

  • clean install on tx2

    clean install tx2 needed to change the boot order in bios upgrade instructions need to win 8 64-bit Windows 7 32 bit

  • Gravador som

    Prezados. MEU som gravador, suas nao are running tools, tais como: reduzir speed, volume etc. MEU Windows XP gosto muiro p e. Obrigado. Pedro Mattos

  • How can I get the program "Philips Songbird' return after remove it?

    I removed by error philips songbird. This program has been installed automatically when I plugged my new mp4 player on my computer. so I have no disk to reinstall. now when I plug in mp4 player nothing happens. is there anything I can do to recover t

  • TV warranty - not worth the paper or money.

    I have a guarantee of full health care on a TVW3201C that is 3 years old again on this subject.  For 2 weeks I get the runaround a replacement/new TV is sent.  So far, it is 8 days and hours of listening to a voicemail while I wait for my phone calls

  • Notification of subscription

    Hi allThis is the requirement of the customer.1 1.       Users can subscribe to content/records2. when they subscribe they get email notification whenever a change to the revision of the content of3. I want a profile info that allows users to choose