Mouth synchronization triggers

Similar Questions

• Master - Client synchronization triggers?

  We use the C API of BDB 4.7.25 under HP - UX 11i. We were experimenting a configuration with two nodes with a single master and his client.
  The client works according to a dumbed down with just the scope of replication running, and we do not create or open databases on the client with the API calls. Our intention is to replicate databases and files of multiple database to the master according to the volumes of transactions with increase of the volume trigger to create more databases (files) on the master.
  
  The first question is about the creation of databases itself. We observe that the files are shipped physically even without the files from physical newspaper that appears on the client. When this happens, we get a lot of messages DB_REP_NOTPERM on the client, and in some cases the messages are repeated two or three times for the same LSN. So we can assume that the physical creation of the database files can sometimes precede the physical creation of the logs on the client?
  The fundamental question that we have is that what triggers the creation of the physical database files on the client?
  
  The second question is about the State of the files replicated to the client.
  How and when can we know that if the database files that are coming on the client are in a consistent and usable condition? This is important because we do not want to land upwards in a situation where a master - passage to the customer fails because the files being replicated on the client were not in a usable state!
  
  Published by: user1033737 on April 23, 2009 12:25

  Yes, it sounds as if you have the right idea of DB_REP_NOTPERM.

  With regard to the creation of new database on the master files, after
  the synchronization was made: the new databases should appear on the
  customer as soon as the operations that created have been
  replicated and applied at the level of the customer. This isn't "without delay."
  of course, but rather with the normal delay affecting any
  replicated transactions. But no doubt quibble. What
  you ask really, I think, is, is the creation of new databases to
  the captain require any kind of additional series of init internal. And
  the answer to this is no.

  Finally, in the scenario you describe, as long as the master has again
  go back to the point where the customer lost the track of log files
  then when the communication is restored the customer can simply intercept
  upward by requesting missing journal records. No additional internal init is
  Mandatory. Operations of the API will not be blocked.

• Different output meter with a different number of samples

  I m using a calendar 6602 i/o Board or a MIO 6281. For controlling the distribution of our measures, I use different counters of two boards that have been triggered by a Digital Out for synchronization. The counters are made CO Pulse Time, implicit, digital synchronization triggered and the sample mode finished.

  Suppose I use two Ctr´s to map 6602. My problem is when you set the number of samples of only CTR for another value, then the second I m getting an error. The rest works perfectly, I can use different delays in starting, low or high times, only samples different amounts Don t work. It s without worrying if I use the Timing of e/s or Multi i/o Board.

  For example:

  _ _       _ _

  CTR 0 / 6602 _ |     |_ _|     |--> _ _ 2 samples

  _ _

  CTR 1 / 6602 _ |     |_ _

  Someone an idea or a tip?

  Hello

  two counters are used for a generation of fenite impulses. Please see the link below.

  Link:
  http://digital.NI.com/public.nsf/allkb/9D1780F448D10F4686257590007B15A8?OpenDocument

  For example, you can use Ctr0 and Ctr2.

  Concerning

  Rüdiger

• Synchronization of AO and output counter, arming and triggering the sequence of events

  Hi all

  I'm trying to synchronize a counter (used as a digital pulse) and analogue of a custom waveform output read from the file on a USB-6211. The goal is to always have these running until I hit 'STOP' and to be able to change the position of the pulse relative to each other. I created a VI by combining and modifying the Cont.Gen.Wfm.Int - Clk.Non - Regen.VI and the Continous.VI Gen dig Pulse Train and I'm now able to produce the two signals to the desired frequency, but I can't seem to get the "Initial period" to work correctly. The values that I come home do not seem to match what is happening LeRiz, and the spacing seems to vary from run to run (within each series is constant). In a previous post, Alfred has suggested:

  "Trigger counter outputs out of the trigger to start AO and adjusting the setting 'Initial period' should give you what you are looking for."  Don't forget to start the tasks of meter in the software before the tasks of the AO (if they are armed and ready to go before the start AO is sent). »

  (link here)

  I tried to use the controls and the propertynodes (perhaps incorrectly), but it doesn't seem to make a difference.

  I think what happens is that my arms and firing sequence is not done correctly. I read on as much information as I could about the outbreak and armament, but I don't know that I understand correctly. Most of the examples I found using an external trigger or perform analog input tasks finished. Does anyone have a suggestion on how to start my two tasks in the proper order? Is something else is wrong here?

  Thank you

  Gabe

  P.S. I have attached the VI and a sample waveform read.

  Hi Gabe,

  This is a cleaned of the VI version that should work (you need not adjust the initial deadline on the right fly?).  Instead of reading a file, I made just a simple square wave of 50% to be used for the test.

  Best regards

• DPRJournal INSERT event not triggered by the execution of the synchronization process

  Hello

  I have a process attached on DialogDatabase to the custom event race on demand.

  This process to synchronize.

  To send me a report of tha sync I have attached a process in the event of the INSERT on the DPRJournal table.

  But the synchronization step (creating a line in DPRJournal) by operating the regular process will finish my process on the insert on DPRJournal event is not raised.

  If I pull the INSERT of ObejctBrowser event on the DPRJournal table it works.

  Why not leave a process?

  Thank you

  I had the problem.

  During the creation of the line in DPRJournal the value ProjectionState is initially empty.

  I put a generator start step condition to verify this value.

  So I just change the creation event of process UPDATE instead of check that ProjectionState is changed

• Synchronization of the mouth

  Is it possible to get more movement in the lip sync? Instead of just going to 'ah' 'f' to 'L' shape, etc., add some images for each shape to create more fluidity?

  Yes - so let's say you want to grow big/small - W - Oo sound you need to make a group called W - Oo within your group of mouth with all frames of animation you want, then add layers of cycle behavior to it inside CH.

  I found that it looks best if you focus the sound appear quickly, then animation for more info on the mouth to return to a resting phase - otherwise, you get a delayed look. I think I'll cover this in a future video tips - thank you for the idea!

• Movements of the mouth does not not on triggered layers

  Hello

  I drew a character with 3 different sets of clothing and has managed to put in place in order to trigger specific keys a version (as the werewolf).

  the only problem is the visemes don't work for one of the sets of characters. I wanted to keep the same head, but once I have set off one of the 3 series head disappears, so I duplicated the Chief for each character set.

  Is there a reason why the visemes do not work for all character sets? is there a way to keep the same head and just change the parts of the body?

  If you use a folder of single head for several heads, or completely different whole corpses, if you have multiple sets of mouths, you will need several behaviors Face & Lip Sync. To do this, double-click your puppet to open it in the Panel of the puppet. With nothing selected, in the properties panel, you will see the behaviors that are applied to the next level. Remove the existing Face & Lip Sync behavior here (click on 'x') since you want those individual layers from the different point of view. Multiple-select all layers that contain your separate (either directly or), heads then choose face & Lip Sync in the '+' to add a new behavior.

  After that, you can select individual layers, so you can adjust the parameter behavior. For example, set the strength to tilt head lower for views aside so that they do not turn downwards or upwards when you tilt your head to the left or the right. Or reduce the strength of the parallax.

• 9174 triggered output pulses and analog input synchronization

  Hello

  I have a cDAQ 9174 with a 9215 analog and a 9401 module. I wonder if this configuration is suitable for my use: a trigger digital extern is sent to the system to trigger a task of analog input, trigger a generation of pulses, with another counter, count of trigger events. Using two counters on 9401, it seems I have no left Terminal at the entrance of my trigger signal. The trigger DAQmx vi does not show counters entries in the list of signals; and if I select a PFI line, an error that says that the line is already in use..., I missed a few obvious solution? I have change my 9401 to a 9402 did?

  Thanks for any help,

  Vincent

  Hi Vincent,.

  So, looks like you need a single line to use as input to trigger events and another line to use for a generation of pulse output.  This should indeed be possible, since the 9401 has 8 lines that are configurable nibble (i.e. lines 0:3 could be configured as inputs, while the 4:7 lines could be taken out, or vice versa).

  However, a big caveat with the 9401 is that the lines must be reserved before each task is started.  This is a limitation of the direction of the line is implemented in hardware and is common as customers when something they using the 9401.  Explicitly reserving your tasks before starting must correct the behavior if that is indeed what you see.

  Best regards

• questions for XY STM triggering and synchronization control

  I use a NOR-PCI-6251 and generate signals of two of the ao: 0 and ao:1 outputs. A signal must be a continuous single ramp of a voltage of-10 to + 10 volts for a second. The second signal should be a sawtooth, once again from-10 to + 10 volts ramp, repeating 256 again to the unique appearance of the first. from 256hz.

  The attached VI is my attempt, but I don't seem to understand the trigger problems or calendar. The result I get (which appears in the attached JPEGs) has two signals starting with 0, ramping up to + 10, then start the ramp-10 back to zero. How can I make the two begin a - 10 and end + 10?

  My first attempt was the use of the Arb GIS Sim block and make a spreadsheet of the values to set the signal. It worked, but was a hassle changing such a large spreadsheet file. Should I go back to that?

  Thank you

  Christopher

  I put the phase both of Sawtooth generators to 180. Solved my problem. Thanks for letting me to think about this outloud. If anyone has any comments/suggestions on my design of the rookie feel free to comment. I'm still a little foggy on the sizes of the memory buffer and sampling frequencies high.

• Hundreds of deleted bookmarks returned after more than a month. How to cancel a synchronization?

  Hello

  A month ago I spent a few hours in compensation to my bookmarks on Firefox. I deleted at least a couple of hundreds of bookmarks - duplicates and is no longer relevant. Earlier, all my deleted Favorites reappeared in my list and bookmarks toolbar. How can I cancel it?

  This isn't the first time that this has happened, but the first time I lost a large amount of work for her.

  Also, I noticed a few days my Firefox for Android had not tried to synchronize since August, so I said to sync and it worked fine when manually triggered. Which is perhaps related?

  Thank you!

  Last sync error:
  1448499683622 browserwindow.syncui observed DEBUG: armor: ui:sync:finish
  1448499683622 browserwindow.syncui DEBUG _loginFailed has state = sync success.login
  1448499683622 browserwindow.syncui observed DEBUG: armor: ui:sync:finish
  1448499683622 browserwindow.syncui DEBUG _loginFailed has state = sync success.login
  1448499683623 browserwindow.syncui observed DEBUG: armor: ui:sync:finish
  1448499683623 browserwindow.syncui DEBUG _loginFailed has state = sync success.login
  1448499683623 browserwindow.syncui observed DEBUG: armor: ui:sync:finish
  1448499683623 browserwindow.syncui DEBUG _loginFailed has state = sync success.login
  1448499683623 browserwindow.syncui observed DEBUG: armor: ui:sync:finish
  1448499683623 browserwindow.syncui DEBUG _loginFailed has state = sync success.login
  1448499683624 browserwindow.syncui observed DEBUG: armor: ui:sync:finish
  1448499683624 browserwindow.syncui DEBUG _loginFailed has state = sync success.login
  1448499683624 browserwindow.syncui observed DEBUG: armor: ui:sync:finish
  1448499683624 browserwindow.syncui DEBUG _loginFailed has state = sync success.login
  1448499683624 browserwindow.syncui observed DEBUG: armor: ui:sync:finish
  1448499683624 browserwindow.syncui DEBUG _loginFailed has state = sync success.login
  Economy of Sync.Tracker.Clients DEBUG 1448499683691 changed ID to customers
  Economy of Sync.Tracker.Passwords DEBUG 1448499683693 changed ID passwords
  Economy of Sync.Tracker.Bookmarks DEBUG 1448499684203 changed ID to Favorites
  Economy of Sync.Tracker.Addons DEBUG 1448499684285 changed ID for addons
  Economy of Sync.Tracker.Forms DEBUG 1448499684286 changed ID for forms
  Economy of Sync.Tracker.History DEBUG 1448499684288 changed ID for history
  Economy of Sync.Tracker.Forms DEBUG 1448500029310 changed ID for forms
  Economy of Sync.Tracker.History DEBUG 1448500029589 changed ID for history
  Economy of Sync.Tracker.History DEBUG 1448500033435 changed ID for history
  Economy of Sync.Tracker.History DEBUG 1448500124687 changed ID for history
  1448500283621 Sync.Service DEBUG User-Agent: FxSync/1.44.0.20151029151421 Firefox/42, 0.
  1448500283621 Sync.Service INFO start sync to 2015-11-26 01:11:23
  1448500283621 browserwindow.syncui observed DEBUG: armor: service: sync: start
  1448500283621 browserwindow.syncui onActivityStart with numActive DEBUG: 0
  1448500283622 browserwindow.syncui DEBUG _loginFailed has state = sync success.login
  1448500283622 browserwindow.syncui observed DEBUG: armor: service: sync: start
  1448500283622 browserwindow.syncui onActivityStart with numActive DEBUG: 0
  1448500283622 browserwindow.syncui DEBUG _loginFailed has state = sync success.login
  1448500283622 browserwindow.syncui observed DEBUG: armor: service: sync: start
  1448500283622 browserwindow.syncui onActivityStart with numActive DEBUG: 0
  1448500283622 browserwindow.syncui DEBUG _loginFailed has state = sync success.login
  1448500283623 browserwindow.syncui observed DEBUG: armor: service: sync: start
  1448500283623 browserwindow.syncui onActivityStart with numActive DEBUG: 0
  1448500283623 browserwindow.syncui DEBUG _loginFailed has state = sync success.login
  1448500283623 browserwindow.syncui observed DEBUG: armor: service: sync: start
  1448500283623 browserwindow.syncui onActivityStart with numActive DEBUG: 0
  1448500283623 browserwindow.syncui DEBUG _loginFailed has state = sync success.login
  1448500283624 browserwindow.syncui observed DEBUG: armor: service: sync: start
  1448500283624 browserwindow.syncui onActivityStart with numActive DEBUG: 0
  1448500283624 browserwindow.syncui DEBUG _loginFailed has state = sync success.login
  1448500283624 browserwindow.syncui observed DEBUG: armor: service: sync: start
  1448500283624 browserwindow.syncui onActivityStart with numActive DEBUG: 0
  1448500283624 browserwindow.syncui DEBUG _loginFailed has state = sync success.login
  1448500283625 browserwindow.syncui observed DEBUG: armor: service: sync: start
  1448500283625 browserwindow.syncui onActivityStart with numActive DEBUG: 0
  1448500283625 browserwindow.syncui DEBUG _loginFailed has state = sync success.login
  1448500283625 Sync.SyncScheduler DEBUG compensation triggers synchronization and the overall score.
  INFO Sync.Status 1448500283626-status of reset.
  1448500283626 Status.service Sync.Status DEBUG: success.status_ok = > success.status_ok
  1448500283627 _ensureValidToken Sync.BrowserIDManager DEBUG already has a
  1448500283633 Status.sync Sync.Status DEBUG: success.sync = > error.login.reason.network
  1448500283633 Status.service Sync.Status DEBUG: success.status_ok = > error.sync.failed
  1448500283633 browserwindow.syncui observed DEBUG: armor: service: sync: error
  1448500283633 browserwindow.syncui onActivityStop with numActive DEBUG: 1
  1448500283633 browserwindow.syncui DEBUG _loginFailed has state = sync success.login
  1448500283633 browserwindow.syncui observed DEBUG: armor: service: sync: error
  1448500283633 browserwindow.syncui onActivityStop with numActive DEBUG: 1
  1448500283633 browserwindow.syncui DEBUG _loginFailed has state = sync success.login
  1448500283634 browserwindow.syncui observed DEBUG: armor: service: sync: error
  1448500283634 browserwindow.syncui onActivityStop with numActive DEBUG: 1
  1448500283634 browserwindow.syncui DEBUG _loginFailed has state = sync success.login
  1448500283634 browserwindow.syncui observed DEBUG: armor: service: sync: error
  1448500283634 browserwindow.syncui onActivityStop with numActive DEBUG: 1
  1448500283634 browserwindow.syncui DEBUG _loginFailed has state = sync success.login
  1448500283634 browserwindow.syncui observed DEBUG: armor: service: sync: error
  1448500283634 browserwindow.syncui onActivityStop with numActive DEBUG: 1
  1448500283635 browserwindow.syncui DEBUG _loginFailed has state = sync success.login
  1448500283635 browserwindow.syncui observed DEBUG: armor: service: sync: error
  1448500283635 browserwindow.syncui onActivityStop with numActive DEBUG: 1
  1448500283635 browserwindow.syncui DEBUG _loginFailed has state = sync success.login
  1448500283635 browserwindow.syncui observed DEBUG: armor: service: sync: error
  1448500283635 browserwindow.syncui onActivityStop with numActive DEBUG: 1
  1448500283635 browserwindow.syncui DEBUG _loginFailed has state = sync success.login
  1448500283635 browserwindow.syncui observed DEBUG: armor: service: sync: error
  1448500283635 browserwindow.syncui onActivityStop with numActive DEBUG: 1
  1448500283635 browserwindow.syncui DEBUG _loginFailed has state = sync success.login
  Sync.SyncScheduler 1448500283636 DEBUG next synchronization to 600000 ms.
  1448500283636 Sync.ErrorHandler ERROR Sync has encountered an error

  I finally solved it by brute force. Whenever deleted bookmarks back, I'm going to "' bookmarks > show all bookmarks > import and backup > restore" and select the last backup without the new bookmarks. "

  After that, I immediately force a sync (click on the circular button with two arrows next to your name on the new menu Burger shit) which seems to ensure that the server accepts the deletions.

  It is not ideal because you can lose bookmarks in this way, but as far as I can tell there is no way to really manage what is on the server, or what is synchronized without playing these games.

• Sync has encountered an error during synchronization: account name Incorrect or password

  I get this error every time Firefox runs. On several machines. I tried everything suggested on your page "https://support.mozilla.org/en-US/kb/how-to-update-to-the-new-firefox-sync" does not. My settings are accepts all except third party cookies, and dom storage is enabled. I tried the safe mode also.

  I turned on services.sync logging (also on pastebin.mozilla.org):

  Loading Sync.Service 1421507984979 INFO 1.37.0 armor
  1421507984980 initialized Sync.Engine.Clients DEBUG engine
  1421507984981 clients Sync.Engine.Clients DEBUG reset last synchronization time
  1421507984985 json Sync.Tracker.Bookmarks TRACK of the disc loading: changes/bookmarks
  1421507984986 initialized Sync.Engine.Bookmarks DEBUG engine
  1421507984986 json Sync.Engine.Bookmarks TRACK of the disc loading: toFetch/bookmarks
  1421507984986 json Sync.Engine.Bookmarks TRACK of the disc loading: failure/bookmarks
  1421507984989 initialized Sync.Engine.Forms DEBUG engine
  1421507984992 initialized Sync.Engine.History DEBUG engine
  1421507984995 initialized Sync.Engine.Passwords DEBUG engine
  1421507984999 initialized Sync.Engine.Prefs DEBUG engine
  1421507985002 initialized Sync.Engine.Tabs DEBUG engine
  1421507985002 Sync.Engine.Tabs DEBUG reset tabs last synchronization time
  1421507985008 initialized Sync.Engine.Addons DEBUG engine
  INFO 1421507985009 Sync.Service Mozilla/5.0 (Macintosh; Intel Mac OS X 10.10; RV:35.0) Gecko/20100101 Firefox/35.0
  1421507985013 Sync.SyncScheduler DEBUG compensation triggers synchronization and the overall score.
  1421507985014 Status.service Sync.Status DEBUG: success.status_ok = > success.status_ok
  1421507985014 URL cached Sync.Service DEBUG under storage base user: https://sync-192-us-west-2.sync.services.mozilla.com/1.5/17968042/
  1421507985014 Status.service Sync.Status DEBUG: success.status_ok = > success.status_ok
  1421507985014 Sync.AddonsReconciler INFO entry as a listener of the Add-ons Manager.
  1421507985015 Sync.AddonsReconciler DEBUG add change listener.
  Observer 1421507985015 INFO Sync.Tracker.History addition of Places.
  1421507985017 Sync.Tracker.Bookmarks ROUTE followed from the beginning.
  1421507985021 Status.service Sync.Status DEBUG: success.status_ok = > success.status_ok
  1421507985022 Status.service Sync.Status DEBUG: success.status_ok = > success.status_ok
  1421507985024 initialized Sync.Engine.AdblockPlus DEBUG engine
  1421507985025 Status.service Sync.Status DEBUG: success.status_ok = > success.status_ok
  1421507985027 fetchKeys FirefoxAccounts DEBUG: true
  1421507985664 FirefoxAccounts ERROR getting/account/key: {'code': 401, "errno": 110, 'error': 'Unauthorized', 'message': 'in the signature of the request invalid authentication token', 'info' ': 'https://github.com/mozilla/fxa-auth-server/blob/master/docs/api.md#response-format' "}
  1421507985664 Sync.BrowserIDManager _fetchTokenForUser authentication ERROR error: AuthenticationError ([object Object])
  1421507985665 Status.login Sync.Status DEBUG: success.login = > error.login.reason.account
  1421507985665 Status.service Sync.Status DEBUG: success.status_ok = > error.login.failed
  1421507985665 Sync.SyncScheduler DEBUG compensation triggers synchronization and the overall score.

  Try to disconnect and reconnect to synchronize via the Firefox > Preferences > Sync window.

  You may also delete the signedInUser.json file in the profile folder.

  You can use this button to go to the Firefox profile folder currently in use:

  • Help > troubleshooting information > profile directory: see file (Linux: open the directory;) Mac: View in the Finder)

• Kept getting the error message of synchronization for the last days

  I was not able to sync my accounts in recent days.
  Here is the error message:
  "Sync has encountered an error during synchronization: the Firefox Sync server maintenance is underway, synchronization will automatically resume." Synchronize automatically retrying this action. »

  My last error log is below to:

  1416113749815	Sync.ErrorHandler	DEBUG	Flushing file log.
  1416113749817	Sync.Service	DEBUG	Exception: Login failed: error.sync.reason.serverMaintenance No traceback available
  1416113749817	Sync.Service	DEBUG	Not syncing: login returned false.
  1416113749817	Sync.Status	DEBUG	Status.service: error.login.failed => success.status_ok
  1416113749821	Sync.Status	DEBUG	Status.service: success.status_ok => success.status_ok
  1416113749821	Sync.Status	DEBUG	Status.service: success.status_ok => success.status_ok
  1416113749840	Sync.ErrorHandler	DEBUG	Log cleanup threshold time: 1415249749840
  1416113749844	Sync.ErrorHandler	DEBUG	No logs to clean up.
  1416114123789	Sync.Status	DEBUG	Status.service: success.status_ok => success.status_ok
  1416114123791	Sync.ErrorHandler	DEBUG	Beginning user-triggered sync.
  1416114123791	Sync.Service	DEBUG	User-Agent: Firefox/33.1.1 FxSync/1.35.0.20141113143407.
  1416114123791	Sync.Service	INFO	Starting sync at 2014-11-15 21:02:03
  1416114123792	Sync.Service	DEBUG	In sync: should login.
  1416114123792	Sync.Status	DEBUG	Status.service: success.status_ok => success.status_ok
  1416114123792	Sync.Status	DEBUG	Status.service: success.status_ok => success.status_ok
  1416114123793	Sync.Service	INFO	Logging in the user.
  1416114123793	Sync.Service	DEBUG	Caching URLs under storage user base: https://sync-129-us-west-2.sync.services.mozilla.com/1.5/9195458/
  1416114123795	Sync.BrowserIDManager	DEBUG	_ensureValidToken already has one
  1416114124226	Sync.Resource	DEBUG	mesg: GET success 200 https://sync-129-us-west-2.sync.services.mozilla.com/1.5/9195458/info/collections
  1416114124227	Sync.Resource	DEBUG	GET success 200 https://sync-129-us-west-2.sync.services.mozilla.com/1.5/9195458/info/collections
  1416114124227	Sync.Service	DEBUG	Fetching global metadata record
  1416114124227	Sync.Service	DEBUG	Weave Version: 1.35.0 Local Storage: 5 Remote Storage: 5
  1416114124227	Sync.Service	INFO	Sync key is up-to-date: no need to upgrade.
  1416114124227	Sync.Service	DEBUG	Fetching and verifying -- or generating -- symmetric keys.
  1416114124227	Sync.Service	INFO	Testing info/collections: {"prefs":1415684960.1,"tabs":1416002806.09,"clients":1415999571.59,"crypto":1411776108.31,"meta":1413417019.06,"bookmarks":1415995802.11,"addons":1415981896.19}
  1416114124227	Sync.CollectionKeyManager	INFO	Testing for updateNeeded. Last modified: 0
  1416114124227	Sync.Service	INFO	collection keys reports that a key update is needed.
  1416114124228	Sync.BrowserIDManager	DEBUG	_ensureValidToken already has one
  1416114124424	Sync.Resource	DEBUG	mesg: GET fail 503 https://sync-129-us-west-2.sync.services.mozilla.com/1.5/9195458/storage/crypto/keys
  1416114124424	Sync.Resource	DEBUG	GET fail 503 https://sync-129-us-west-2.sync.services.mozilla.com/1.5/9195458/storage/crypto/keys
  1416114124425	Sync.Status	DEBUG	Status.login: error.sync.reason.serverMaintenance => error.login.reason.server
  1416114124425	Sync.Status	DEBUG	Status.service: success.status_ok => error.login.failed
  1416114124425	Sync.ErrorHandler	DEBUG	Got Retry-After: 3600
  1416114124425	Sync.Status	DEBUG	Status.login: error.login.reason.server => error.sync.reason.serverMaintenance
  1416114124425	Sync.Status	DEBUG	Status.service: error.login.failed => error.login.failed
  1416114124425	Sync.SyncScheduler	DEBUG	Got backoff notification: 3600000ms
  1416114124425	Sync.SyncScheduler	DEBUG	Fuzzed minimum next sync: 1416117724425
  1416114124425	Sync.Service	WARN	Got status 503 fetching crypto keys.
  1416114124425	Sync.Service	WARN	Failed to fetch symmetric keys. Failing remote setup.
  1416114124425	Sync.Service	WARN	Remote setup failed.
  1416114124425	Sync.SyncScheduler	DEBUG	Clearing sync triggers and the global score.
  1416114124426	Sync.SyncScheduler	DEBUG	Next sync in 4079084.8112176084 ms.

  It might take a little longer, because it is currently weekend and most of the engineers of synchronization are stationed at the United States Coast West zone...

  Edit: you can follow along the progression of this this question to the bug #1100162

• Question about USRP synchronization when using 1 X 2 MIMO

  Hello

  I wonder section about 1 X 2 MIMO (a transceiver system two USRP). I entered sequence of bits as "10101010...' part of the transmitter." If '1' and '0' bits are aligned in order. 0 comes after 1, 0 just after 1. I want to send this sequence of bits of the USRP transmitter to the channel. On the receiving party;  How can I set the time and implemented receiver USRPs triggers that one that USRP will get only 1 bit of these when other USRP will pick up only when thise 0 bits. How can I synchronize this MIMO 1 X 2 like this system? Could you give me advice?

  Best regards.

  Hi ahmetemir,

  I think that this example will provide a framework for what you're trying to do: https://decibel.ni.com/content/docs/DOC-23677.

• Synchronization of analog and digital output with the external sample clock

  Hello

  First of all sorry for my English, I will try to explain what I want to do.

  I want my PCIe-6321 to send two custom signals (modification sawtooths) on a mirror controller. I would also like to generate output with my card at the beginning of each tooth of saw. Everything must be synchronized with an external k-clock signal of 100 kHz. The idea is that whenever the PCI receives a trigger to external clock, it sends two analog output voltages and when he received 1024 clock ticks it will also send a pic of triggering TTL. What I do is first prepare the map and after that in a loop sending and modifing the output values of the two signals and at the same time send a digital signal Boolean in each arch, so when's done it 1024 iterations of the loop I send an event to the digital port. Attached you can see.

  The problem is that I don't know how to synchronize both. Can I use the sample clock just to the analog output? I can use sample for the two outputs clock, or do I need to use the output of the meter? If don't know how to use it here.

  If I do nothing else bad/wrong, I would be grateful for feedback.

  Thanks in advance,
  Pablo

  I don't know how but I find the solution. I'm generating more than a positive value (as I was triggered maybe very fast the oscilloscope has been absent there). If I put the sample clock of digital output to use the sampling/ao/Dev1 clock that it doesn't, but if I put to use the same source as the OD (terminal where my external clock is connected), but the trigger to start the DO to be Dev1/ao/StartTrigger this works. I don't really know why, but it does.

  Thank you for your patience and your help. I put here the final code.

• Synchronize PXI-8512/2 and DAQ, PXI-6220 CAN

  Hello

  I read some examples and other posts on the topic "sync", but I need more information.

  I'm using a PXI-8512/2 with an older application, based on the API of frame. Several frames are transmitted and received periodically, and I need to enter a unique ID of arbitration which has a cycle of ~ 5 ms.

  At the same time, I need a task of data acquisition (analog input) with a sampling frequency of 1000 Hz.

  The challenge is, I need to have the same time base for the analog input and CAN.

  As far as I understand, the timestamps CAN are created in the PXI-8512. The timestamp of the start of the DAQ tasks is based on the time of OS (Windows).

  Transmission/reception CAN must be running still (to perpetuate the ECU), and the data acquisition task will be triggered manually.

  I found the example '\nican\Frame - base with NI - DAQmx.llb\CAN Frame entry API DAQmx Input.vi'. It fits my needs? There is a comment saying: "the departure of AI uses the same sampling as CAN. What it means? The sampling frequency of my CAN is fundamentally different from DAQ. But I have to be able to associate each sample DAQ for a CAN of armature (same time base).

  Thank you for any information helping to clarify.

  Concerning

  Hello

  Sorry, I don't know why I thought you had an X-Series. There is also an example for the other series with the XNET driver:

  Synchronize PXI - CAN with analog DAQmx of entry (using the PXI-Clk10) .vi

  Kind regards

  Heinz