Move database Standard Edition to the Enterprise Edition.

Similar Questions

• Oracle Database - Standard edition & diagnosis Pack?

  I need help, whether the following configuration is valid?
  
  Oracle Database Standard Edition one Oracle Diagnostics and Tuning Pack
  
  The reason I ask, it is possible to buy the Tuning Pack and the Oracle Diagnostics Pack online (he does not say it is limited to the company on the product description) and my manager wants to use it with the Standard edition. Read the MetaLink following document 1084132.1 (link below), he said that these packs are only an option if you are already running business, is this true?
  
  So does that mean if I execute Standard, it is not possible to run, even if we buy the licenses.
  
  1084132.1: https://support.oracle.com/CSP/main/article?cmd=show & id = 1084132.1 & type = NOT
  
  Edited by: user6591482 may 27, 2010 02:07

  Hello

  The following sections describe the Oracle Management packs. Management packs can be purchased only with Enterprise Edition. The features of these packs are available through Oracle Enterprise Manager Database Control, Oracle Enterprise Manager Grid Control, and API provided with the Oracle database software.

  http://download.Oracle.com/docs/CD/B19306_01/license.102/b14199/options.htm

  hope this helps
  Daniele

• Difference between Enterprise Edition and Standard Edition for Oracle RAC

  Hello
  
  In our current configuration we have CARS on standard edition and customer is now considering to go to Enterprise Edition, but not yet to decide because of the cost.
  
  Is there a difference between the Infrastructure of grid 11gR 3 Enterprise edition and Standard Edition?
  
  They told me first install Enterprise Edition and then will move to Standard Edition if they can not get the EA license, so in this case do I have to re - install standard edition network infrastructure?
  
  
  
  Kind regards
  Chirag

  994551 wrote:
  Hello

  In our current configuration we have CARS on standard edition and customer is now considering to go to Enterprise Edition, but not yet to decide because of the cost.

  Is there a difference between the Infrastructure of grid 11gR 3 Enterprise edition and Standard Edition?

  They told me first install Enterprise Edition and then will move to Standard Edition if they can not get the EA license, so in this case do I have to re - install standard edition network infrastructure?

  Hello

  There is no "grid Infrastructure 11gR 3 Enterprise edition and Standard Edition", is the only Infrastructure of grid 11 GR 2.

  On the Oracle Clusterware licenses (grid Infrastructure).
  At least one of the servers in the cluster is allowed for the Oracle database (SE1, SE or EE)
  A cluster is defined to include all machines that share the same Oracle Cluster Registry (OCR) and the drive to vote.
  http://docs.Oracle.com/CD/E11882_01/license.112/e10594/editions.htm#CJAHFHBJ

  On the licensing database.
  http://www.Oracle.com/us/products/database/Enterprise-Edition/comparisons/index.html

  Note: Oracle Real Application Clusters (Oracle RAC), is an option to Oracle Database 11 g Enterprise Edition and included with Oracle Database 11 g Standard Edition (on clusters with a maximum of 4 Sockets).
  If you move to EA Oracle, you must purchase a separate license to use the RAC option

  Regarding the Installation:
  Nothing changes on your current installation of Grid Infrastructure 11.2
  Just install a new fresh install to choose EF of the Oracle (the current clusterware) database during installation. Configure services database from this new HOME of ORACLE. Change anything on the database of all the previous backup and used functionality remains unchanged. With the help of this new House Oracle new features are enabled to be used by your databases.

  On the Downgrade:
  Step by step procedure to perform the conversion from Enterprise Edition to edition Standard [ID 465189.1]

• Create database Eve on GR 11, 2 standard edition one

  Hi experts,
  
  I want to create 11 GR 2 standard edition, a watch on the two linux to linux and one environment window. I have invested my 4-5 days on it, but I did not create, because of the standard edition. Please give me step by step creation. It helps big beautiful wil...
  
  
  
  Thanks and greetings
  Frédérique Gupta

  SANCHIT GUPTA wrote:
  Hi experts,

  I want to create 11 GR 2 standard edition, a watch on the two linux to linux and one environment window. I have invested my 4-5 days on it, but I did not create, because of the standard edition. Please give me step by step creation. It helps big beautiful wil...

  Have you had a glance at the documentation of dataguard,
  http://docs.Oracle.com/CD/E11882_01/server.112/e10700/standby.htm#i72073

  Who has that very clearly said.
  >
  Oracle Data Guard is available only as a feature of Oracle Database Enterprise Edition. It is not available with Oracle database Standard edition.

  Note:
  It is possible to simulate a boot environment of database with the Oracle Database Standard Edition databases running. You can do this by transferring manually archived redo of log files using a utility to copy of the operating system or using custom scripts that send regularly archived redo log files of one database to another. The consequence is that this configuration does not provide the functionality of recovery after disaster, the manageability, performance and ease of use available with Data Guard >

  So if you want the data to be protected, use Enterprise Edition.

  Aman...

• How to find the difference between standard edition and standard edition one

  How to find the difference between oracle database standard edition and standard edition one 64 bit
  
  (a) using sql
  (b) using the configuration/installation files

  How to find the difference between oracle database standard edition and standard edition one 64 bit

  (a) using sql

  Select * the option of $ v;

  (b) using the configuration/installation files

  opatch lsinventory-details

• FAST_START_MTTR_TARGET & Redo Log advise in 10g Standard Edition

  Operating system: Oracle Enterprise Linux 5 Update 2 (64-bit)
  DB: 10.2.0.4
  
  I tried to put the FAST_START_MTTR_TARGET in my 10.2.0.4 database Standard Edition. I would also like, as well as to the value set for recovery reasons, use the log Advisor again to determine the best size for my recovery logs.
  

  [oracle@scgamadb01pl ~]$ sqlplus / as sysdba
  
  SQL*Plus: Release 10.2.0.4.0 - Production on Thu Oct 16 15:04:32 2008 Copyright (c) 1982, 2007, Oracle. All Rights Reserved.
  
  Connected to:
  Oracle Database 10g Release 10.2.0.4.0 - 64bit Production
  
  SQL> ALTER SYSTEM SET fast_start_mttr_target=300;
  ALTER SYSTEM SET fast_start_mttr_target=300
  *
  ERROR at line 1:
  ORA-02097: parameter cannot be modified because specified value is invalid
  ORA-00439: feature not enabled: Fast-Start Fault Recovery

  Oracle Support tells me that Fast-Start fault Recovery is not available in 10g Standard Edition so I'm unable to put FAST_START_MTTR_TARGET. I am confused because I have set in my iinstance 9i Standard edition and can adjust it.
  
  Anyone who encountered this? Is there one solution other than to manually adjust all parameters at the checkpoint?

  In 9i, there also not suppose to work for oneself
  Oracle either ignored the parameter or it's a bug does not detect is not the setting.

  http://download.Oracle.com/docs/CD/B10501_01/server.920/a96531/ch5_edit.htm#66165

  You can use LOG_CHECKPOINT_INTERVAL instead
  http://download.Oracle.com/docs/CD/B19306_01/server.102/b14237/initparams109.htm#REFRN10095

• Oracle standard edition / standard edition license.

  Hi all
  
  Tell me the differences between standard and Standard Edition One in on CPU/Licensing terms?
  
  Excerpt from the Oracle software investment Guide
  
  Oracle Database Standard Edition can only allowed on servers that
  have a maximum capacity of 4 Sockets
  
  When Oracle programs with Standard Edition One of licenses or
  Standard edition in the name of the product, a processor is considered equivalent to one
  Jack occupied; However, in the case of each chip, multi-chip modules in the
  multi chip module is counted as an occupied socket.
  
  
  I have Intel xeon Quad Core CPU which takes place an outlet.
  
  (i) so that it is counted as chip 4 so 4 socket?
  (II) or is considered 1 plug?
  (III) should I always take note of the Oracle processor Core factor Table (the software investment guide says nothing for oneself)
  
  Kind regards
  Alan

  To make oracle SE 1 = 1 CPU license, except when the socket accepts several (not hearts) chips specifically IBM Q Series servers have taken on the main Board that accept a card with two processors on this subject, should be 2 permits for standard edition. A grey area is chips with two separate completely dies in-house, the best is to contact the Sales Department of oracle and give them the specification of the server and they can then provide the exact metric of licenses.

• Move the database as part of the Oracle 12 c upgrade files

  Hello

  I read the document upgrade Oracle for the database Oracle 12 c.

  http://docs.Oracle.com/CD/E16655_01/server.121/e17642/upgrade.htm#CHDJJJEE

  Here in DBUA, step 8 says that

  Move database files in the page, select an option:

  • Move database as part of the upgrade files
  • Move the quick recovery as part of the upgrade area

  I wonder why we never need to use this feature to move database files?

  I understand for FRA, it will define just the parameters DB_RECOVERY_FILE_DEST and DB_RECOVERY_FILE_DEST_SIZE parameters to initialize at the new location and size new startup of the new home of Oracle database. But why never use us animated here database files option?

  Thank you

  Delphine

  There is no requirement to move the database as part of the upgrade files. It is simply provided as an option

  HTH
  Srini

• Migrate the database from standard edition to enterprise edition.

  Hello
  
  We use oracle 10.2.0.4 on AIX 5.3.
  
  We lack some databases on the standard edition, now we need to migrate these databases to enterprise edition,
  
  What are the steps to do it?
  
  
  Thank you.

  Salvation;

  Please find below the doc:
  How to convert the database from Standard to Enterprise Edition? [117048.1 ID]

  Respect of
  HELIOS

• Migrate the database to Oracle 10 g Standard Edition to Enterprise Edition

  What is the best way to migrate a database was created with the title of Oracle Enterprise Edition (both 10 gr 2) Standard edition?
  
  I can just install new binary EA. or do I have to recreate the Pb and to import/export?
  
  Thanks in advance!

  Hello

  I suggest that you install classic editiion and import/export company defenitely will work for you without hassle.

  Just export / import the schema of the application based

  On SE
  exp system/password owner=userA,userB, userC, userD file=myusersexport.dmp log=myusersexport.log
  
  On EE, make sure  userA, userB, userC, userD exists and so any special ROLES before importing
  imp system/password fromUser=userA,userB,userC,userD toUser=userA,userB,userC,userD  file=myusersexport.dmp log=myusersimport.log
  

  Concerning

• Move 11 GR 2 (11.2.0.2) RAC 3 nodes Standard Edition to Enterprise Edition

  Hi all
  
  I searched My Oracle Support a document describing the steps to upgrade editions in 11 GR 2 RAC environment, but without success.
  
  Can someone point me in the right direction. A grassroots movement, I found http://docs.oracle.com/cd/E14072_01/server.112/e10819/intro.htm#BABFBJCC
  
  But this document does not specify whether it applies to CARS as well. I think I would just top the RAC, grid, ASM and Stanley, SCAN Agents database. Uninstall oracle home in the standard and re - install right publishing company on it without touching the database.
  
  My main growth is Post uninstall and post re - install, something to do with the reissue of links possibly houses to regroup?
  
  Thanks in advance for any help or advice on this issue.
  
  Jan S.

  I have no experience with CARS, MOS Doc 451981.1 (how to convert a database RAC of Standard Edition (SE) to Enterprise Edition (EE)?), but perhaps useful. The doc is specific to 10 gr 2, so changes may need to be made to GR 11, 2. I was opening a SR too.

  HTH
  Srini

• Oracle database Enterprise edition and standard edition one

  Hello
  is it possible to install on the same server, separate oracle database Enterprise edition and standard edition, once 11 GR 2?
  
  Best regards
  Jean-Marc
  
  Published by: jmniard on March 12, 2011 05:19

  NO.

  Listener is a specific node resource, so you should have 1 single earphone (ranging from the upper version of DB House) on a server and it will be.

• With Standard Edition database DB from Enterprise Manager management packs.

  Hi all
  
  As far as I know Enterprise Manager 11g is free to install, but not management pack.
  I want to install 11g Grid control in my environment but I got all my oracle Standard edition databases.
  So my question is that:
  Which one would use one of the following management pack in my Enterprise manager 11g grid control environment?
  
  Below is the text copied from EM 11 g Documentation
  
  Enterprise Manager offers the following packs of the Oracle database:
  
  Pack of diagnostics for the Oracle database.
  
  Tuning Pack for Oracle Database+.
  
  Management of change for Oracle Database pack+.
  
  Configuration Management Pack for the Oracle database.
  
  Provisioning and Patch Automation Pack for Oracle Database+.
  
  Hide data Pack for Oracle Database+.
  
  These management packs can be purchased only with Enterprise Edition. The features of these packs are available through Oracle Enterprise Manager Database Control and Oracle Enterprise Manager Grid Control and API provided with the Oracle database software.
  
  
  
  Thank you very much
  Hems

  Not exactly, but you can not register with anything other than Enterprise Edition management packs.

  You can continue to use the Grid control to monitor the availability of database and server and perform tasks to others, but the features available in these management packs (as the 'Performance', or patch management tab and so on) will not work. It still provides a value without these packs.

• IHAVE windows server 2008 standard Edition, but we want to improve it to Enterprise Edition and save the elders allowed other servers how do I do this Action

  Dear Sir
  I have windows server 2008 standard Edition, but we want to upgrade to Enterprise Edition and save old licenses to other servers how do I do this Action

  Thank you in advance

  Hello

  You can find the Server forums on TechNet support, please create a new post at the following link:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• the upgrade of windows 2003 standard edition to enterprise edition

  Hello
  
  Currently, we are conducting 32-bit essbase in windows 2003 standard edition 32 - bit os. We are planning to upgrade to windows 2003 enterprise edition 32-bit os (or) windows 2003 standard edition 64-bit operating system...
  
  so in this scenario
  
  1 > my current essbase applications will have no effect (or). ???
  
  2 > if aplications get impact what could be the possbilities for this scenario...?
  
  Published by: 854925 on April 26, 2011 22:26

  With Essbase you should not all the problems of your switch/bet far Win 2003 Enterprise Edition.

  If you are moving to x 64 Win Server you will probably have to do a full install on a new machine in which case you will just be transfer (.otl) schema files, etc. for the Essbase Essbase Server to the new. So no effect as long as you install more Essbase on x 64 don't box correctly.