Move the database as part of the Oracle 12 c upgrade files

Similar Questions

• Move the Oracle database to a new server

  What is the best, easy, quick and painless way to move an Oracle (9 and 10 g) database to a new a new server with different directory names?
  (I hope I have not asked too)
  
  Thanks in advance...

  Depending on the size of the database and the number of exp/imp of tasks that are run at the same time that the use of exp/imp can easily be fast enough.

  When you create a new database and fill through importation, you will have the opportunity through pre-set arrays to move data for purposes of space management. More in bonus all your tables are rearranged. Even if Oracle tables reuse the space that is in them, we recovered a significant percentage of our total table area allocated for re-use. Depending on your application and how it has changed over the years where the space is needed and where it was consumed may be different.

  More important still new features as locally managemed tablespaces and SAMS that may not have existed or have not chosen at the time of the creation of tablespace in the source database can now be implemented.

  A new database also means a new space of system tables. Over time you may find yourself with a few bad data in the tablespace system due to various bugs that have existed over the years. Creation of a new database of vacuum and filling are a way to eliminate these problems.

  The best method depends on your needs, the State of the database from a point of view of management s/n, your new layout of disk, the amount of data and the time in which you must work. Sometimes slow, DBA work involved method is the best solution.

  IMHO - Mark D Powell-

• Windows 8 move the SSD hard drive program files

  Hello

  I just bought a new computer, it has 2 drives. one is a 32 GB SSD which was intended only for Windows operating system and the other is a 500 GB of HARD drive, which was for all other files and programs.

  Now because my SSD is the player by default; the program, Program Files (x 86) files and the Users folder are found on C:. this sense that when I install a program and am not invited to select a destination (such as Office 365) folder, it will automatically end on C: instead of D:. Is it possible for me to move these 3 folders on the C: on the D: drive.

  Running under WINDOWS 8

  Could someone help me with this problem please.

  Thank you

  Support site for your computer manufacturer should help you with this. Normally a 32 GB ssd drive does not contain the operating system because it is too small. She is just a cache for recent files speed up the computer and it is not generally drive C.

  'See' your disk, open disk management and who will give you a better idea how the disks are configured. Shortcut keys to access disk management are key Windows + X. technicians Contact the computer support or ask about it in their forums. Don't move anything without assistance.

• Move the layer setting to another file

  In Photoshop, is there a way to move a layer of setting to another file WITHOUT having to extract the files to the workspace on the side and drag and drop the layer?

  Layer > duplicate layer

  Edit: But even tabs you should be able to manually drag their course to another file. Could you please post a screenshot to illustrate your question?

• How to move the competing newspaper, outside, Bishop the file to a server to another server

  Hussein,
  
  I have two application is running on the different operating system. (AIX and Sunsever). Now, AIX is production server and sunserver will very soon be prod.
  
  I updated the preproduction of prod database, ran the autoconfig, update profile with the Web server name current and everythings works fine.
  
  But how do you move the journal competitor, out and file manager of preproduction and I manually copied and log file, when I opened the logfile preproduction error an error occurred during the attempt to establish a server connection requests with node (current prod) files net wok conifig question or tns to look on the node (prodserver) my don't not running.
  
  How to overcome this,
  
  Please advice.
  
  My version 11.5.10.2
  
  Thank you
  Prince

  Prince.

  Assume that your listener application is upward, so have I you checked the FND_CONCURRENT_REQUESTS table entries?

  For more information, see (the transition from DEV to TEST - now you can not see the old reports [1065025.6 ID]).

  Thank you
  Hussein

• Error when you try to move the cloudvolumes folder in a different data store

  OK, so I'm moving my App volume 2.10 cloudvolumes folder of datastoreA on vcenterA on datastoreB on vcenterB, because we want to separate us from our VDI of our basic infrastructure.

  We are able to access the two vcenters on the web client.

  I tried to just copy the folder datastoreA to datastoreB cloudvolumes and received the following error.

  Copy of the file object has already been deleted or has not been entirely created

  
  

  I've seen this error in Veeam before when moving virtual machines from a data store. The solution is to remove and readd the virtual machine in the inventory.

  
  

  Everyone tried to move the cloudvolumes folder?

  
  

  Any help would be appreciated.

  
  

  Thank you
  

  
  

  
  

  I would never move the folder because there are files that will always be accessible or are not in read/write mode.

  I suggest you copy the files from the 1 folder to another, or maybe add an additional data store to the manager Appvolumes and let the files (appstacks at least) copy automatically.

• WAG160N Upgrade file is not the correct type or version of this device.

  I currently have Firmware Version firmware version: V1.00.09 on WAG160N. I tried to upgrade the firware of ussing.12 the following "WAG160Nv1-EU-ANNEXA-ETSI-1.00.12-code,0.zip" file I get the following error:

  Upgrade file is not the correct type or version of this device.

  Update failed.

  Please select the correct file and try again.

  I forgot that I had extracted the first .zip file. Who and the upgrade worked.

• The fastest way to move a database to another server even.

  Hello gurus,
  Normally, I have worked with exp/imp, but now our database is too large to move this way takes about 24 hours for export and import. We bought new hardware and I need to go the new material on the production database. Operating system is the same Red Hat Enterprise rel 5.6 Linux 64 bit, oracle is the same 10.2.0.40 same block and character size, 64-bit, only difference, is that the new hardware has space more physical and better memory. Is there an easy way to move the data by copying on the control files and data files to a new server? I have not tried, data pump or transportable tablespaces, and I have limited time - so this request. I need to find the solution the faster your advice, so I can learn quickly how to implement your recemendation.
  My export .dmp database size is 34GB.
  Any advice would be great!

  No need to run a database create new host - already built sound at the source. Make a software 'only' install and get the ORACLE_HOME corrected and updated, you'll clone basically just the database to the new instance.

  As long as the source database is in archivelog mode, you can put the database in backup mode, copy the files of data, complete backup to the source mode and make a log switch.

  Here's a detail how at: http://www.dba-oracle.com/oracle_tips_db_copy.htm

  Instead of step to RECOVER the DATABASE, we use ' database to RECOVER up to TIME AAAA-MM-JJ HH24:MI:SS to the AID of BACKUP CONTROLFILE; "and the value until the time a second or two beyond the"... save end;' timestamp to the source instance. "

  You will need this archivelog, maybe encourage the file generated after the ends of the mode of backup and recovery for ARC files more a couple, depending on the activity of update to the source. If using a spfile, originally executed 'create a spfile pfile=/.../initSID.ora;' scp this file to the new host, adjust as required.

  Maybe you'll want to change DB_NAME, then the '... The DATABASE VALUE... "part of the controlfile create is necessary. Updated the SERVICE_NAME and if using LOCAL_LISTENER adjust the host = properly.

  If the directory paths are all the same, it is even easier. And if the are not, path names can be corrected in the script of create controlfile.

• Move the database on the DSO from one server to the other in AIX

  Hello

  We have a project to move a Database (11.2.0.2) in ASM (stand-alone IM 11.2.0.4) in AIX. I followed the steps, but it failed.

  1. on the source server, I stop the database and removed the data DISKGROUP. I also took the diskgroup backup metadata before going down it.

  2 storage team has removed the mapping of the discs and they remapped to the new server. However, the names of disks have changed
  Note: There is no oracleasm and the drive string used is/dev/rhdisk *. The number of disk changed in the new server. However, we have renamed these discs.

  3 installed GI in silent mode with the "software only" option and then set up AP using roothas.pl.

  4. install Oracle database on the same level of patch from the source.

  5 ASM set up using a small new disc using ASMCA in silent mode.

  6. after the configuration of ASM, I don't see the Diskgroup database, but I see the drives as CANDIDATE disks.

  7. now, I restored the metadata from backup I took in the first step.

  8 Diskgroup appears and mounted. However, there is no data. All the data disappeared.

  Please can anyone suggest what I missed? Support for Oracle is not clear in its instructions.

  It's test database, so we could afford to lose the data. We cannot follow duplicate RMAN that our Production database is very large, and all backups are in bands. We also long downtime. Therefore, the only option we have is to physically move the LUNS.

  In my opinion, ASM has not read the header information of disk that LUNS are mapped before ASM is configured and consider them as CANDIDATE disks. Please specify.

  Thank you

  Vikas

  ASM devices that belong to a disk group contain the header special ASM data, that ASM uses to identify the disks. The path of unity or the name of the device as such is irrelevant. ASM must know the chain drive in order to locate the devices. I do not know what has been mapped or put in correspondence, but if the disks appear as candidate ASM disks, then information should have been erased in the process.

  Why not simply create a full database backup using RMAN and then restore and recover the database on the new server? Provided that the new server has the same software and ASM starts, this should be easy.

• How to store images in the oracle database and get back on a jsff page in ADF?

  Mr President.

  How to store images in the oracle database and get back on a jsff page in ADF?

  I have students and employees in my database and want to store their pictures against their ID.

  How to do this?

  Concerning

  Tender,

  You can check the links that explain this below.

  https://tompeez.WordPress.com/2011/11/26/jdev11-1-2-1-0-handling-imagesfiles-in-ADF-part-2/

  Johny tips: ADF: display image files from database as a popup in Application Web ADF

  See you soon

  AJ

• What do I need install Oracle Database 11 g 2 for the Oracle 10 g database migration?

  Hi all

  Would you be kind enough to help me with the following question!  I currently have Oracle Database 10 g on the old servers to my work and I want to install the GR 11, 2 on Windows Server 2008 R2 Enterprise Oracle database to new servers for upgrade.  I also forms, reports and Designer 10 g to maintain our existing applications.  So, I already looked in the Certification and found the following:

  Latest version of the product: latest version of the database server window weblogic

  Form Builder 11.1.2.0.0 11.2.0.4.0 7, 2008 R2, 2008 10.3.6.0.0

  Reports           11.1.2.0.0                                           11.2.0.4.0                                                 7, 2008 R2, 2008                                   10.3.6.0.0

  Designer 10.1.2.6.0 11.2.0.1.0 xp, vista, 7, 2003 (all 32 bit)

  For Designer, it is approved for a 32 - bit window, so I'm having trouble with the new requirement of system this window must be after 2003.  I want to take all of the availability and follow the Oracle certification (except that I will be given Designer because of compliance) as above.  I'm new with Oracle, and I don't know what comes with what to do it is complete.

  1. I'm going to install a database server (free 11.2.0.4.0 as described above) in a new server (2008 R2), then what I have to install the WebLogic Server with it?

  2. I'll install the generator of reports and Forms Builder (11.1.2.0.0) in another server (2008R2), so what I have to install WebLogic Server as well with her?

  3. what else do I need to install on this two server so that they work so that I can begin to migrate all existing data, forms and States more?

  Any advice would be greatly appreciated.  Thank you.

  Remember that this forum is targeted to the Oracle Forms product, for questions about the database can be better answered in one of the areas of database.  That being said, here are my comments:

  1 I'll install a database server (version 11.2.0.4.0 as described above) in a new server (2008 R2), then what I have to install the WebLogic Server with it?

  A database facility didn't need of WLS (which I am aware). Consider what you want is a typical design at three levels. Database - average level (applications server) - Client (tools and end user).   Each level has nothing to do with the other installation point of view assuming that they are not installed on the same computer. WLS is a middleware software (medium level). Be sure to check the product documentation before performing any installation. The 11.2 DB docs can be found here:

  http://docs.Oracle.com/CD/E11882_01/index.htm

  2. I will install Forms Builder and Report Builder (11.1.2.0.0) in another server (2008R2), so what I have to install WebLogic Server as well with it?

  Tools (Forms Builder, generator of reports, etc.) are not remote or web tools.  These must be installed on each developer's computer.  The installation of these tools does not require that WLS be installed first (on the developer's computer), but there is no need to be run unless the developer wants to apply locally for testing.  For a production deployment (multi-user), a similar concept will be used.  WLS will be installed first, followed by the forms and reports Services (runtime).  It will be on your remote server (medium level).  Software distribution you use will be exactly the same for the developer and the installation of intermediate level.  The difference will be in the options you choose during installation.  If you want to include manufacturers during installation, simply check the appropriate boxes when you are prompted.

  Also, if you plan to use the forms/States 11 GR 2, I recommend not using 11.1.2.0 and instead use 11.1.2.2, which is the latest version. F/R 11.1.2.2 installation requires that you first install WLS 10.3.6.  You should refer to the product documentation before beginning any installation. Specifically, carefully examine the product Setup Guide and Guide to the system requirements. The 11.1.2.2 doc library can be found here:

  • http://docs.Oracle.com/CD/E48391_01/index.htm

  3 what else do I need to install on this two server so that they work so that I can begin to migrate all the existing data, forms and States on?

  Looks like you've covered everything.  The granular details will be covered in the Installation and Guides to the system requirements.

  My recommendations:

  o ensure that each machine has at least 4gig of RAM

  o ensure that each machine has a static IP address before you start any part of the installation.  This can be done without a static IP address, but you must take additional steps (see Guide to Sys Req).

  o on machines where you plan to install WLS, make sure you have a 64 bit JDK installed first.  If you don't use a F/R 11.1.2.2, you must use Java 6.  However, if you decide to use 11.1.2.2, you can use Java 6 or 7.  Do not use Java 8 in all cases.

  When it comes to the designer, it must be installed on an old machine.  In General, I do not recommend to use it longer.  Although there is currently not a way to full migration out of it, you can use SQL Developer to manage the db objects that were created/used with it.  There are several MyOracleSupport documents that discuss the issue.  You can search the Knowledge Base of MOS to find or contact Support for more information.

• listener down randomly on the oracle Rac database

  Hello

  Given that we have done a database migration BECAUSE we have a listener who crashes, on a single node.

  Operating system is oracle linux 5

  version Oracle 10.2.0.4

  First I thought it was because of the conflict on the system. That I thought it was the rman backup that uses 3 channels. I changed it to 1 channel. But this does not resolve the issue.

  The listener log files shows:

  October 24, 2014 02:45:47 * ping * 12547

  AMT-12547: TNS: lost contact

  AMT-12560: TNS:protocol adapter error

  AMT-00517: lost contact

  Linux error: 32: Broken pipe

  October 24, 2014 02:45:47 * ping * 0

  October 24, 2014 02:45:47 * (CONNECT_DATA = (CID = (PROGRAM =) (HOST =hostname... com)(User=Oracle))(Command=services) (arguments = 64) (service = (Description = (Address = (Protocol = TCP) (HOST = 10 *. *.7)(PORT=1521)))(VERSION=169870336)) * services * 0)

  October 24, 2014 02:45:47 * (CONNECT_DATA = (CID = (PROGRAM =) (HOST = __jdbc__)(USER=)) (SERVICE_NAME = EX... com)) * (ADDRESS = (PROTOCOL = tcp) (HOST = 10 *. *.5)(PORT=26441)) * establish * example. com * 0

  October 24, 2014 02:45:47 * (CONNECT_DATA = (CID = (PROGRAM =) (HOST =hostname... com)(User=Oracle))(Command=Status) (arguments = 64)(service=LISTENER_hostname) (version = 169870336)) * status * 0

  Is no longer listening on: (DESCRIPTION = (ADDRESS = (PROTOCOL = ipc) (KEY = EXTPROC1)))

  Is no longer listening on: (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=10.**.**.7) (PORT = 1521)))

  Is no longer listening on: (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=10.**.**.5) (PORT = 1521)))

  Listener completed notification to the CRS stop

  
  

  
  

  and

  
  

  20 October 2014 02:07:59 * ping * 12547

  AMT-12547: TNS: lost contact

  AMT-12560: TNS:protocol adapter error

  AMT-00517: lost contact

  Linux error: 32: Broken pipe

  20 October 2014 02:07:59 * ping * 0

  20 October 2014 02:07:59 * (CONNECT_DATA = (CID = (PROGRAM =) (HOST = __jdbc__)(USER=)) (SERVICE_NAME = EX... com)) * (ADDRESS = (PROTOCOL = tcp (PORT = 25180))(HOST=10.**.**.5)) * establish * E.G. * .com * 0

  20 October 2014 02:07:59 * (CONNECT_DATA = (SERVER = DEDICATED)(SERVICE_NAME=EX.**.com) (FAILOVER_MODE = (TYPE = SELECT) (METHOD = BASIC)(RETRIES=180) (DELAY = 5)) (CID = (PROGRAM = C:\H2)(USER=Administrator))) * (ADDRESS = (PROTOCOL = tcp (PORT = 51520))(HOST=10.**.**.222)) * establish * exodus.))) com * 0

  20 OCTOBER 2014 02:07:59 * (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = EX... com) (FAILOVER_MODE = (type = SELECT) (Method = Basic)(RETRIES=180) (Delay = 5)) (CID = (PROGRAM = C:\er.exe)(HOST=-13)(USER=Administrator))) * (ADDRESS = (PROTOCOL = tcp (PORT = 58005))(HOST=10.**.**.23)) * establish * exodus.))) com * 0

  20 OCTOBER 2014 02:07:59 * (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = EX... com) (FAILOVER_MODE = (type = SELECT) (Method = Basic)(RETRIES=180) (Delay = 5)) (CID = (PROGRAM = C:\er.exe)(HOST-05)(USER=Administrator))(INSTANCE_NAME=EX1)) * (ADDRESS = (PROTOCOL = tcp (PORT = 62958))(HOST=10.**.**.15)) * establish * exodus.))) com * 12518

  TNS-12518: TNS:listener could not hand off client connection

  AMT-12571: failure of TNS:packet writer

  AMT-12560: TNS:protocol adapter error

  AMT-00530: Protocol adapter error

  Linux error: 104: connection reset by peer

  20 OCTOBER 2014 02:07:59 * (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = EX... com) (FAILOVER_MODE = (type = SELECT) (Method = Basic)(RETRIES=180) (Delay = 5)) (CID = (PROGRAM = C:\MServer.exe)(HOST=MEDIASTOR-02)(USER=Administrator))) * (ADDRESS = (PROTOCOL = tcp (PORT = 64954))(HOST=10.**.**.12)) * establish * exodus.))) com * 12518

  TNS-12518: TNS:listener could not hand off client connection

  AMT-12571: failure of TNS:packet writer

  AMT-12560: TNS:protocol adapter error

  AMT-00530: Protocol adapter error

  Linux error: 104: connection reset by peer

  20 OCTOBER 2014 02:07:59 * (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = EX... com) (FAILOVER_MODE = (type = SELECT) (Method = Basic)(RETRIES=180) (Delay = 5)) (CID = (PROGRAM = C:\Mnge.exe)(HOST=-14)(USER=Administrator))) * (ADDRESS = (PROTOCOL = tcp (PORT = 49566))(HOST=10.**.**.24)) * establish * exodus.))) com * 12518

  TNS-12518: TNS:listener could not hand off client connection

  AMT-12571: failure of TNS:packet writer

  AMT-12560: TNS:protocol adapter error

  AMT-00530: Protocol adapter error

  My crsd.log shows:

  2014-10-22 02:04:57.670: [CRSEVT] [687806784] 0CAAMonitorHandler: 0:Action Script/u01/src/bin/racgwrap (check) has expired for ora.amcmstvdb01.vip! (timeout = 60)

  2014-10-22 02:04:57.671: 0CheckResource error [CRSAPP] [687806784] ora.amcmstvdb01.vip = - 2 Error Code

  2014-10-24 02:19:13.940: 0CheckResource error [CRSAPP] [685705536] ora.amcmstvdb01.LISTENER_AMCMSTVDB01.lsnr = 1 error Code

  2014-10-24 02:19:13.967: [CRSRES] [685705536] 0 in stateChanged, target of ora.amcmstvdb01.LISTENER_AMCMSTVDB01.lsnr is online

  2014-10-24 02:19:13.969: [CRSRES] [685705536] 0ora.amcmstvdb01.LISTENER_AMCMSTVDB01.lsnr on amcmstvdb01 went OFFLINE unexpectedly

  2014-10-24 02:19:13.973: [CRSRES] [685705536] 0StopResource: set the values of the CLI

  2014-10-24 02:19:13.981: 0Attempting [CRSRES] [685705536] to stop the "ora.amcmstvdb01.LISTENER_AMCMSTVDB01.lsnr" Member "amcmstvdb01".

  2014-10-24 02:28:16.221: [CRSRES] [685705536] 0Stop "ora.amcmstvdb01.LISTENER_AMCMSTVDB01.lsnr" Member "amcmstvdb01" has succeeded.

  2014-10-24 02:28:16.223: [CRSRES] [685705536] 0ora.amcmstvdb01.LISTENER_AMCMSTVDB01.lsnr RESTART_COUNT = 0 RESTART_ATTEMPTS = 5

  2014-10-24 02:28:16.224: [CRSRES] [685705536] 0Restarting ora.amcmstvdb01.LISTENER_AMCMSTVDB01.lsnr on amcmstvdb01

  2014-10-24 02:28:16.227: [CRSRES] [685705536] 0startRunnable: set the values of the CLI

  2014-10-24 02:28:16.228: 0Attempting [CRSRES] [685705536] to launch "ora.amcmstvdb01.LISTENER_AMCMSTVDB01.lsnr" Member "amcmstvdb01".

  2014-10-24 02:45:03.791: [CRSEVT] [685705536] 0CAAMonitorHandler: 0: could not enter oracle/10.2.0/db_1/bin/racgwrap(start)

  Category: 1234, operation: scls_process_join, loc: childcrash, operating system error: 0, other: an abnormal termination of the child

  2014-10-24 02:45:03.791: [CRSEVT] [685705536] 0CAAMonitorHandler: 0:Action Script oracle/10.2.0/db_1/bin/racgwrap(start) expired for ora.amcmstvdb01.LISTENER_AMCMSTVDB01.lsnr! (timeout = 600)

  2014-10-24 02:45:03.792: 0StartResource error [CRSAPP] [685705536] ora.amcmstvdb01.LISTENER_AMCMSTVDB01.lsnr = - 2 Error Code

  2014-10-24 02:45:21.220: [CRSEVT] [687806784] 0CAAMonitorHandler: 0: could not enter oracle/10.2.0/db_1/bin/racgwrap(check)

  Category: 1234, operation: scls_process_join, loc: childcrash, operating system error: 0, other: an abnormal termination of the child

  2014-10-24 02:45:21.222: [CRSEVT] [687806784] 0CAAMonitorHandler: 0:Action Script oracle/10.2.0/db_1/bin/racgwrap(check) expired for ora. EX. EX1.inst! (timeout = 600)

  2014-10-24 02:45:21.223: 0CheckResource error [CRSAPP] [687806784] to the ora. EX. EX1.inst = - 2 Error Code

  2014-10-24 02:45:50.080: [CRSRES] [685705536] "ora.amcmstvdb01.LISTENER_AMCMSTVDB01.lsnr" Member "amcmstvdb01" 0Start failed.

  2014-10-24 02:45:50.084: [CRSRES] [685705536] 0ora.amcmstvdb01.LISTENER_AMCMSTVDB01.lsnr broken amcmstvdb01 moving.

  2014-10-24 02:45:50.103: 0Cannot [CRSRES] [685705536] move ora.amcmstvdb01.LISTENER_AMCMSTVDB01.lsnrStopping dependants

  2014-10-24 02:45:50.111: [CRSRES] [685705536] 0StopResource: set the values of the CLI

  2014-10-24 11:23:09.036: [CRSRES] [687806784] 0ora.amcmstvdb01.LISTENER_AMCMSTVDB01.lsnr target the OFFLINE value before stop action

  2014-10-24 11:23:09.037: [CRSRES] [687806784] 0StopResource: set the values of the CLI

  2014-10-24 11:23:09.046: 0Target [CRSRES] [687806784] the OFFLINE value for "ora.amcmstvdb01.LISTENER_AMCMSTVDB01.lsnr".

  2014-10-24 11:23:09.115: [CRSRES] [687806784] 0ora.amcmstvdb01.ons target the OFFLINE value before stop action

  2014-10-24 11:23:09.116: [CRSRES] [687806784] 0StopResource: set the values of the CLI

  2014-10-24 11:23:09.124: 0Attempting [CRSRES] [687806784] to stop the "ora.amcmstvdb01.ons" Member "amcmstvdb01".

  2014-10-24 11:23:10.142: [CRSRES] [687806784] 0Stop "ora.amcmstvdb01.ons" Member "amcmstvdb01" has succeeded.

  2014-10-24 11:23:10.212: [CRSRES] [687806784] 0ora.amcmstvdb01.vip target the OFFLINE value before stop action

  2014-10-24 11:23:10.213: [CRSRES] [687806784] 0StopResource: set the values of the CLI

  2014-10-24 11:23:10.221: 0Attempting [CRSRES] [687806784] to stop the "ora.amcmstvdb01.vip" Member "amcmstvdb01".

  2014-10-24 11:23:11.232: [CRSRES] [687806784] 0Stop "ora.amcmstvdb01.vip" Member "amcmstvdb01" has succeeded.

  2014-10-24 11:23:11.268: [CRSRES] [687806784] 0ora.amcmstvdb01.gsd target the OFFLINE value before stop action

  2014-10-24 11:23:11.269: [CRSRES] [687806784] 0StopResource: set the values of the CLI

  2014-10-24 11:23:11.277: 0Attempting [CRSRES] [687806784] to stop the "ora.amcmstvdb01.gsd" Member "amcmstvdb01".

  2014-10-24 11:23:12.284: [CRSRES] [687806784] 0Stop "ora.amcmstvdb01.gsd" Member "amcmstvdb01" has succeeded.

  2014-10-24 11:23:23.714: [CRSRES] [687806784] 0startRunnable: set the values of the CLI

  2014-10-24 11:23:23.723: 0Attempting [CRSRES] [687806784] to launch "ora.amcmstvdb01.gsd" Member "amcmstvdb01".

  2014-10-24 11:23:24.740: [CRSRES] [687806784] "ora.amcmstvdb01.gsd" Member "amcmstvdb01" 0Start succeeded.

  2014-10-24 11:23:24.840: [CRSRES] [687806784] 0startRunnable: set the values of the CLI

  2014-10-24 11:23:24.847: 0Attempting [CRSRES] [687806784] to launch "ora.amcmstvdb01.vip" Member "amcmstvdb01".

  2014-10-24 11:23:26.857: [CRSRES] [687806784] "ora.amcmstvdb01.vip" Member "amcmstvdb01" 0Start succeeded.

  2014-10-24 11:23:26.962: [CRSRES] [687806784] 0startRunnable: set the values of the CLI

  2014-10-24 11:23:26.971: 0Attempting [CRSRES] [687806784] to launch "ora.amcmstvdb01.ons" Member "amcmstvdb01".

  2014-10-24 11:23:27.017: [OCRUTL] [683604288] u_freem: mem passed is null

  2014-10-24 11:23:28.983: [CRSRES] [687806784] "ora.amcmstvdb01.ons" Member "amcmstvdb01" 0Start succeeded.

  2014-10-24 11:23:29.093: [CRSRES] [687806784] 0startRunnable: set the values of the CLI

  2014-10-24 11:23:29.099: 0Attempting [CRSRES] [687806784] to launch "ora.amcmstvdb01.LISTENER_AMCMSTVDB01.lsnr" Member "amcmstvdb01".

  2014-10-24 11:23:30.110: [CRSRES] [687806784] "ora.amcmstvdb01.LISTENER_AMCMSTVDB01.lsnr" Member "amcmstvdb01" 0Start succeeded.

  2014-10-27 03:07:00.415: 0CheckResource error [CRSAPP] [687806784] ora.amcmstvdb01.LISTENER_AMCMSTVDB01.lsnr = 1 error Code

  2014-10-27 03:07:00.421: [CRSRES] [687806784] 0 in stateChanged, target of ora.amcmstvdb01.LISTENER_AMCMSTVDB01.lsnr is online

  2014-10-27 03:07:00.423: [CRSRES] [687806784] 0ora.amcmstvdb01.LISTENER_AMCMSTVDB01.lsnr on amcmstvdb01 went OFFLINE unexpectedly

  2014-10-27 03:07:00.424: [CRSRES] [687806784] 0StopResource: set the values of the CLI

  2014-10-27 03:07:00.430: 0Attempting [CRSRES] [687806784] to stop the "ora.amcmstvdb01.LISTENER_AMCMSTVDB01.lsnr" Member "amcmstvdb01".

  2014-10-27 03:07:02.437: [CRSRES] [687806784] 0Stop "ora.amcmstvdb01.LISTENER_AMCMSTVDB01.lsnr" Member "amcmstvdb01" has succeeded.

  2014-10-27 03:07:02.439: [CRSRES] [687806784] 0ora.amcmstvdb01.LISTENER_AMCMSTVDB01.lsnr RESTART_COUNT = 0 RESTART_ATTEMPTS = 5

  2014-10-27 03:07:02.440: [CRSRES] [687806784] 0Restarting ora.amcmstvdb01.LISTENER_AMCMSTVDB01.lsnr on amcmstvdb01

  2014-10-27 03:07:02.443: [CRSRES] [687806784] 0startRunnable: set the values of the CLI

  2014-10-27 03:07:02.444: 0Attempting [CRSRES] [687806784] to launch "ora.amcmstvdb01.LISTENER_AMCMSTVDB01.lsnr" Member "amcmstvdb01".

  2014-10-27 03:07:04.564: [CRSRES] [687806784] "ora.amcmstvdb01.LISTENER_AMCMSTVDB01.lsnr" Member "amcmstvdb01" 0Start succeeded.

  2014-10-27 03:07:04.566: [CRSRES] [687806784] rebooted 0Successfully ora.amcmstvdb01.LISTENER_AMCMSTVDB01.lsnr on amcmstvdb01, RESTART_COUNT = 1

  2014-10-27 03:07:04.571: [CRSRES update] [687806784] 0ora.amcmstvdb01.LISTENER_AMCMSTVDB01.lsnr LAST_RESTART time in ocr

  2014-10-28 02:17:25.278: [CRSEVT] [875006272] 0CAAMonitorHandler: 0: could not enter/u01/src/bin/racgwrap (check)

  Category: 1234, operation: scls_process_join, loc: childcrash, operating system error: 0, other: an abnormal termination of the child

  It could be because:

  https://support.Oracle.com/epmos/faces/DocumentDisplay?_afrLoop=380194821865447 & ID = 985170.1 & DisplayIndex = 2 & _afrWindowMod...

  https://support.Oracle.com/epmos/faces/SearchDocDisplay?_adf.CTRL-State=drbucptmm_436 & _afrLoop = 385944517854402 #SYMPTOM

  I hope you can give me a hint or two on how to solve this problem.

  Regards and thanks in advance.

  The problem was the backup script that was executed on the server.

  He used a linux 'cp' command to copy the tar.gz (compressed backup file) file to a share that has been configured as automount. Don't ask me why.

  For some reason, this caused the CPU up to 250% which of course killed any response from the server.

  I replaced the command copy with rsync and everything seems to work fine now.

  Kind regards

• Why use Oracle Grid in the oracle database

  Hi experts,

  In fact in my workplace, we use normal database (use not the grid). I want to know why we use the grid in the oracle database. all that the advantage of it.

  Reg,

  Thomas

  You might have a grid of database servers (access to the shared storage) or application servers.

  You can use the Grid control to monitor and manage multiple database / application servers.

  10g and 11g and 12 c facilities grid Infrastructure is installed to facilitate the DSO (is not part of the 10g GI) but a part of the 11 g and 12 c GI and Clustering.

  Then, depending on the context "grid" can refer to another product.

  Hemant K Collette

• FMW: Portal Upgrade Advisor - video part 4 patch the Oracle Home "how to install Oracle Middleware 11 g Rel 1 portal and discoverer" should specify to use previous pfrd Oracle Home

  NOTE: from 'build base Middleware of Oracle 11 g Architecture. "
  Review of the videos for "How to install Oracle 11g Rel 1 portal Middleware and discoverer?"
  Part 4 patch the Oracle home (04:57)
  https://support.Oracle.com/CSP/main/article?cmd=show & type = ATT & ID = 1118681.1:PD11G_INSTALL_PT4 & inline = 1

  The verbal and demo explanation does not use the original location/Oracle HOme of the previously
  installed for the binary PFRD base.   It probably should.

  In addition, for some steps to follow to patch binaries PFRD, I'd put it:

  Step 4.  I am guessing that the patch will establish an another sub dir Disk1 and don't want to overwright
  installation of the initial PFRD, therefore, moves the Group of hotfixes as follows.

  CD/opt/web/install/PortalUpgradeAdvisor/pfrd
  960 ls - ltr
  Group of hotfixes mkdir 961
  Group patches 962 mv p11060983_111140_LINUX.zip
  Group patches 963 cd.
  Unzip 964 *.

  RE: of course, having unpacked the group created patches another subdirectory Disk1 with his own runInstaller
  VNC gui:

  I guess, all we are doing is patching of binary files, nothing should be running.
  Maybe an environment set in same, as when we ran last the PFRD install, however.  There we / I had
  run. / set_mid_clean after making sure the files property was oracle: oracle.

  Yes, VNC gui and
  / opt/Web/Install/PortalUpgradeAdvisor/pfrd/Patchset/disk1
  . / runInstaller

  Here again, we select Install Software - is not configured
  RE: Get the message again on this screen "installs the software only. After said is finished, use
  config.sh at ORACLE bin directory to configure the working bodies of these components installed.

  Specify the installation location.  Always to
  Oracle Middleware homepage: / opt/oracle/Middleware
  and
  An Oracle home directory: as_2 # I bet it must be as_1 because that is where the initial PFRD install binary files has occurred.

  NOTE: The summary of the Installation in the video screen escape the Oracle Home is the previous specified during the initial installation. That is to say. PFRD_Binaries.   I guess I should have named that instead of taking the default as_1. At least I would have to have done that.  Well.  Maybe this story might help the next guy.

  Also

  NOTE: The Installation screen is not "from" group of patches as in the video where it says
  Install Oracle Portal, forms, reports, and discover the Group of hotfixes.
  

  Hi Charlie
  I'm a little confused by this feedback. Especially when you say that you see the option "install - do not configure. Should this option is visible only when you run the Basic 11.1.1.2 PFRD the software installer. The Group of hotfixes 11.1.1.4 has his own 'runInstaller'... and this will display what you see in the viewlet. You definitely run the installer from the directory of stage in the Group of hotfixes? (I'll do my own validation test - if I find something strange going on... I'll report.)

  I now take the following action

  1. I will put the Viewlet so it is clear that the Group of hotfixes is staged in a different place from the base 11.1.1.2 media
  2. provide that nothing must be running (because at this point, no instance of 11 g of construction has been configured)
  3. There's a "slippage" that illustrates the Middleware and Oracle Home entries in the screen "Location of Installation to specify" IE

  Middleware homepage: / u01/alca_portal/middleware
  Oracle home: PFRD_Binaries

  However, you will see that this slide for 2 seconds (which is an error) and if you miss it probably.

  Just FYI - the House of Oracle 11 g correction is in general the same procedure as patching a mid-layer House AS10g i.e

  -You set the Oracle Home base using the installation of the basic software program
  -You patch the Oracle home using the installation program of the Group of hotfixes

• Team Foundation Server Issues in the Oracle (ODT) database project

  Hi all

  Developer Dotnet and Oracle, I fortunately came across the ODT.
  Unfortunately, I have some problems in combination with the Team Foundation Server that hopefully someone here, the experts may resolve.

  So, it's the environment...

  Client:
  Windows 7 business
  Teacher of Visual Studio 2010.
  ODT with ODAC 12.1.0.1.0

  Servers:
  Foundation of the Server 2012 team
  Oracle Database 11 g Release 11.2.0.2.0 - 64 bit

  
  Description of the problem:

  Well, almost everything seems to be working.
  I can connect to my database diagram in Server Explorer, edit and save back views, functions, packages,... and save them to the server.
  I can create a new "project database Oracle" in Visual Studio.
  Now, I right click and select "generate the Script to create project". This also works very well. Points of view or anything else I clicked are added to the Oracle database project.
  Finally I select 'Add to Source code control' and the whole solution and any addition of scripts are archived as you wish.
  I can now change, automatically checked it as used in th IDE of VS.
  Works perfectly so far...

  But now I have problems to add new scripts. It makes me crazy.
  I right click again on a new view, etc. and select "Generate the Script to create project". The script is added to the same Oracle database project.
  The project file is also removed, because it now has a new added file. BUT the same script file will not be added to the source control.
  And worse yet, I'm not easily able to add the file manually in the context menu of the command "Add to source control" or something similar.
  The only way is to open windows Explorer, move to the previously added script file and add it to source code control using power tools shell extensions.
  I can't imagine that this is the way planned to add additional scripts to the ODP.

  So is there anyone around who can tell me how to solve this problem?

  Best regards
  Martin

  Hi Martin,

  I have recently come to know that there actually is a bug very similar to the old version of Oracle development tools.

  It is fixed in the latest version (12.1.0.1.2 or later).

  When you get a chance, please try it.

  Thank you

  Christian