Move the data from Palm Z22 for palm M125

Similar Questions

• How to copy the data from Palm Desktop on a PC running Windows 8.1

  If like me you still find the Palm Desktop data (addresses, calendar, notes, etc.) handy and use it long after throwing the combined capacity and 'sync', you can see this is useful.  I bought a new PC running Windows 8.1 and had problems with data transfer due to a problem as I understand it, which does not exist in Windows XP, Vista or 7 versions.  Here is a summary of a way to easily transfer data from these earlier versions if you have a USB flash drive (or Dropbox, Google Drive, whatever) very convenient:

  (1) Download Palm Desktop 6.2 or 6.2.2 to your new PC.  Give a user name exactly as it exists in the database from your old PC.  This name will serve as Office Automation to create a folder name of six letters (an abbreviated version of your name) to hold the data that Palm Desktop will turn upward.  Wait a few seconds for this to happen, and then close the application on your new desktop.

  (2) in your old PC you want to transfer data from, find the folder named "Palm OS Desktop" which should exist in 'Documents' under path of folder and subfolders 'Users' as > your subfolder name > Documents in Windows 7 (can also be Vista) or may be under "Documents and Setting" folder in Windows XP.

  (3) in this folder "Palm OS Desktop" search this subfolder of six letters of your name and select this whole subfolder and select 'Copy' or Ctrl-C

  (4) locate the same name of subfolder in your new PC (which will have data zero), delete and then 'paste' the subfolder you "copied" in the exact same location.  If you did it right, Viola!  Your new desktop PC should display all the transferred data, once you open the application again.

  Most of the same procedure works with PC Windows 8.1 (probably also Windows 8).  What I found different is that the subfolder of data created under "Palm OS Desktop} had 7 instead of 6 characters with a"0"(zero), added as the last character.  When finally, you copy and paste this subfolder in the new PC there so rename and add "0" for the Palm Desktop to locate these data.

  I hope this helps.

  Data in XP is located in C:\Program Files\Palm (or PalmOne) \ < your HotSync name truncated > \Backup.

  HotSync for Win8 has been available for quite a while now!  See the post at the beginning of this section called "64-bit Windows USB drivers for Palm Desktop" for instructions and driver downloads.

  Palm Desktop 4.x and 6.2.2 use different database formats - 6.2.2 went to .mdb as an extension.

  Best way to migrate data is to perform a HotSync on the new machine, or use the built-in in Palm Desktop Export/Import option.  Export the addresses and calendar files, and then copy those of the new machine.

  The import option to retrieve data.

  WyreNut

• Move the data from the partitions again tablespace - direct table filled by ETL

  Hello

  We have a large composite table date-range/hash partitioned table (using time partitioning 11.2.0.3 range)

  1 partition for each month and each such partition 4 under separate partitions.

  We want to move some data from most significant storage but also direct table and inserted in all the days as part of the data warehouse and large table want to ensure

  operations below result in errors in the data loading procedure

  Suppose also should not take long to run lines 40 million or more each month.

  Select *.

  Of user_tab_partitions

  Where table_name = 'CUSTOMER_TRANSACTION '.

  And nom_partition like 'SYS % '.

  1. (1) Alter table retailer_transaction and rename partition < nom_partition > CUST_PART_ < YYYYMM >
  1. (2) tablespace create dedicated for the month of the affected partition
  1. ((3) alter table retailer_transaction move tablespace subpartition < sys... > < partition_tablespace > created in 2) above

  ALTER table retailer_transaction change the default attributes for the partition < CUST_PART < YYYYMM > < tablespace in 2 above > tablespace)

  4 global index which would eventually rebuild afterwards due to the transition if movement makes no valid.

  Several local bitmap indexes that belong to partitions.

  Thoughts?

  Thank you

  I agree in a good store of data, everything should be according to the best practices ETL or guideline. I guess it is a FACT table, because it's big enough. A method that I can share (followed in the real world big DW) is "ELP" IE Partition Exchange loading. You can find the basic architecture of the Internet.

  The basic architecture is as

  The source (in your case partitioned) Table--> (unpartitioned) intermediate Table--> Table possible target (partitioned)--> the cleaning activities (and overtime).

  You can use any ETL tool for this (I won't mention any other reasons).

  Later, you can delete the original table and use that new table as your FACT table, your application will be available all the time. There are drawbacks as most uses of double-spaced, other than normal ETL these work will take certain amount of resources so that other ALS etc. In addition, if you load a few current days during these activities you plan / program accordingly.

  Your demo is also fine, but regular ETL may fail because you rename the partitions (some uses of ETL tool partition name, in case you ever ELP) also unusable global indexes can cause failure (you have local too?).

• What is the best way to move the data from the app and Server data structures?

  Hi guys,.
  
  I developed my application locally with Apex 4.2 and Oracle 11 g XE on Windows 7. Not far away, it is time to move the application to a server Oracle Apex. I guess that Exim is the way to go app. But what about the APA tables and data (tables/as 'customer' and 'account' created specially for the application)? I've been using a modeling tool, so I can run a DDL script to create the database server data structures. What is the best way to move the application data on the server? Is it possible to move the structures and data in a single process?
  
  Thank you
  Kim

  There is probably another way to get here, but in Developer SQL, on the navigation tree, expand objects until your table, right-click, and then click EXPORT... you will see all the options. It is a tedious process and it sucks IMO, but yes, it works. This is zero especially because 1) it's a table at a time, 2) If your data model is robust and has constraints and sequences and triggers, then you will need to disable all for the insert and we hope you can re-enable constraints, etc. without hitch (good luck, unless you have only a handful of tables)

  I prefer to use the oracle EXP command-line to export an entire schema, then the server target, I use IMP to import the schema. In this way, it is almost true. This makes the dirty life if you develop multiple applications in a single schema, and I felt pain - however - it is much easier to drop the tables and other objects is to create them! (thus, even if the process of EXP/IMP moved more than you wanted to "move".. blow everything you don't want on the target after the fact...)

  You can use method datapump oracle too.

  If not, what can be done, IF you have access to both servers of your instance of SQL developer (or if you can tnsping both already from the command line, you can use SQL * MORE), is to run a script that will identify the objects of your applications apex (usually by the prefix for the names of objects, such as % EBA_PROJ_ etc.) and do all the manual work for you. I've created a script that does just that so that I can pass data from dev to prod servers on a dblink. It is difficult because of the order that must be executed to disable constraints and then turn it back on and of course, more complicated if don't always precede you ALL your "objects demand '... (tables, views, triggers, sequences, functions, procs, indexes, etc.)

• Best LKM to move the data from in Oracle of a diagram to another diagram

  Hi gurus,
  
  What is the best KM to move data from one schema to another within the same oracle database schema.
  
  Thanks in advance

  It seems that you have created two servers of data for the two schemas. You have created two physical schema inside the single database server.

  Use LKM oracle to Oracle dblink.

  "LKM sql for sql" is used to migrate data from DB DB (DB2 to oracle or DB2 to SQL Server, etc.) but is not recommended for large volumes.

  Published by: user8427112 on December 2, 2012 06:07

  Published by: user8427112 on December 3, 2012 08:08

• Move the data from partition to partition of MAX table?

  11 GR 2, RHEL, 64-bit

  Guys,

  Is there a way to MOVE data to a specific partition on MAX in a partitioned table?

  While I can drop this specific partition and recreate it later, but I want the data to be resident in the MAX score until I recreate this specific partition.

  Pls suggest me?

  Thank you

  Hari

  Depends on the way in which the partitions are defined (the partition limit values), each partition will allow only certain values must be stored.

  Logically, the lines that are in partition 'A' cannot return to the partition'm ' because the limit / list of values for the two partitions is different.

  You can move the lines of a fictitious table / temp, but probably not to another partition until and unless MERGE you partitions (in which case the original partition doesn't exist).

  Hemant K Collette

• Move the database from Sun Solaris for HP - UX Itanium

  Hi all.
  Just a quick question here.
  
  We have some sitting databases on Sparc Solaris 9 Sunfire 480r.
  
  We are looking to move our 9.2.0.4 database out of this and put them on a new HP UX Itanium server.
  
  Is the only option for me to move this data to imp/exp?
  
  Thanks for all replies.
  
  Jamie

  The only option for you is to use the import/export.

  Asif Momen
  http://momendba.blogspot.com

• (Exactly) how to move the data from drive C to D, E, f discs where there are a lot of space?

  C = 14.65 GB, 18.30 MB available

  D = 59.87 GB, 49.82 GB available.
  E = 37,34 GB, 36.40 GB available.

  Create a folder in my music, photos, etc., move all the files in each of

  the new folder, once completed, switch to the other disk. As far what will other data, like

  3rd party software that is not part of the operating system, you must install it to another

  drive, uninstall, reinstall after pc reboot...

  If drive D: E: F: & is actuall hard disks, not partitions, install data &

  software for them is a good performance upgrade, otherwise, its purpose is

  marginal... For more information, try this link.

  http://www.Microsoft.com/mspress/books/sampchap/6559.aspx#106

  Or this link.

  http://TechNet.Microsoft.com/en-us/library/cc750856.aspx

• Copy the data from USB key for comments

  Dear all

  How can I put a USB and copy some data and programs from other PC to a guest VMS on ESX 3.5?

  You can also buy USB hubs attached ethernet. With these, install you an agent on the virtual machine and she moved the USB stick as if it was connected directly to the virtual machine.

  See:

  AnywhereUSB

  http://www.Digi.com/

  Belkin network USB hub

  http://gadgets.fosfor.se/Belkin-network-USB-hub

  http://reviews.CNET.com/networking-and-Wi-Fi/Belkin-network-USB-hub/4505-3243_7-32467513.html

• How can move the data from 10.4.11 to El Capitan?

  I recently acquired a new iMac running El Capitan. My previous iMac is a 20 "G5 iSight running 10.4.11 - I have about 200 GB of music (in iTunes) and photos (in iPhoto) and various other documents and records I want to store and access on the new iMac. Migration Assistant is not an option for 10.4 - What other ways can I do this?

  Drag-copy the files on an external drive, or computers on the network and use file sharing, or connect them to FireWire/Thunderbolt and start the old iMac with the T key.

  (142531)

• Move the HD from one office to another desktop computer

  It is a question about moving the files & applications from one desktop to another. I try to get 1 year of use of existing & software equipment.

  I have an office of stand-alone Dell old 12 years with Windows XP that I use every day at home. I have an old Dell Office of 7 years with XP & no apps or files that I have gained from the work that I do not use.

  I guess the older machine is sick because I have to reset the clock each time I boot Windows. It seems to work otherwise. I want to act before the death of the sick machine.

  A method that I am considering moves chips drive & memory fixed older machine to the latest machine. These two components are less than 3 years. I replaced a fixed disk damaged & added some memory.

  The other method I see is to copy the contents of the fixed disk on the sick machine on the newer machine fixed drive, leaving the components in place.

  I know I need to buy new hardware and new software. I would wait 10 Windows.

  I'd like suggestions on the simple, reliable and cost-effective method to buy more time by using existing hardware.
  Pat_Hof

  To move the data from the user, just install the xp installation cd, search for "other tasks" in the

  menu, search for "File Transfer Wizard", set the pc as old pc, select the file to save, save files

  in a new folder that you created, once its through, out of xp cd. Move the new folder to a cd

  Once through, on the new pc, install the xp installation cd, locate the file transfer, set the new pc, select

  to search for files, installation cd with user data, find the folder on cd, install FTW

  It automatically... Best bet is to run FTW on a new user account, and then move the files to the other as

  necessary. It's one way, others, install the HD from old pc to new, HD set as slave,

  with the HD as a slave, the data can be used with the operating system.

  Windows 10 is already available.

• Remove data from Palm address memo from hard drive

  I need to back up and delete my data from my hard drive, so I can send my windows vista computer for repair. I deleted the directory of the user from the directory Palm and palmOne in program files, but the data is always available for Palm Desktop. Where palm Office is finding it?

  Found and stored / deleted. Thank you very much!

  Message relates to: Palm TX

• Hi I want to erase all the data from my current phone if I erase content and settings would be deleted all the data off my sim card? Thanks for your help

  Hi I want to erase all the data from my current phone if I erase content and settings would be deleted all the data off my sim card? Thanks for your help

  Erase the data on your phone will not erase the data on the sim card.

• How can I use notifications to send data from different sources for the same chart?

  Hello

  I use the model of 'Continuous measurement and logging' project comes with LV 2013.

  It is extremenly helpful in understanding the messaging between the acquisition, graphic and loops of newspaper. (Thank you NEITHER!)

  I ran into a snag though.

  I want to change so that my graphic loop receives notifications of data from two sources of acquisition by the declarant.

  I have trouble getting the data from the two sources to display on one graph.

  I've isolated the problem in the attached vi.

  Here's what happens:

  1. I create 2 parallel loops data and send the data to a third parallel loop with the notifiers.

  2. the third loop receives data from one of the loops because one of the authors of just receiving notifications is to expire instead of receive data.

  Can anyone suggest how can I fix?

  Thank you.

  -Matt

  Here's my modification of your VI. I put notes on the block diagram to explain the changes. He uses a queue for data transfer to avoid data loss. It uses a notifier to stop loops. All local variables and value property nodes have been eliminated.

  The way loops are arrested probably let some data in the queue. No more of one or two iterations of each of the loops of data acquisition. If you need ensure that all data has been displayed (or recorded in a real application), then you must stop acquiring loop first and read the queue until you know it's empty and both other loops stopped. Then stop the render loop and release the queue and the notifier.

  Lynn

• How to move the FILE from one place to another and keep "Indexing" have to move to the unknown location so you can't discover its full file path? Windows instructions provide information wrong re: how to do this!

  Make a bunch of audio files, placed in a folder on my desktop. Files initially sent to RealPlayer to burn, but when finished burning CD and went to read a CD, folder got seized by Media Player, 'Indexed' and disappeared from the office. I'm a relatively new computer user, and I need to learn more about file paths, how to view the path FULL of a file on my computer and how to type (create) full path when I need to. The "Indexing" feature seems to erase this lesson for me, and after having spent four hours trying to find Vista instructions on "How to move the file from one place to another", I gave up! Windows 'Help and Support' on my computer gives wrong directions. It states that if I right click on a folder > properties, a dialog box opens with a tab by which I can move my account. There is no tab location here. I found locations tab when right click on the "Mobile" folder, but still no option to "move file". No idea what is the folder "Roaming" or why it's on my computer. I want my audio files in the My Music folder, but this place is "access denied." Don't know how to get the audio file it in any case, but if anyone has any advice, I would be very happy! Thank you. PS - I had no problem moving folders in XP. I don't like the idea that a computer is to decide where to put my files. I want to control where I put my files. I don't like the way search works under Vista. I liked the XP search companion better because, for a computer fool like me, it was really easy to organize and find files and folders and had an option specific to find audio and video file TYPES.

  Here is an article on how to move your personal folders in Vista: http://www.howtogeek.com/howto/windows-vista/moving-your-personal-data-folders-in-windows-vista-the-easy-way/.  If you're talking about the special folders (such as photos, Documents, office...), then here is an article on how to move: http://www.winhelponline.com/articles/95/1/How-to-move-the-special-folders-in-Windows-Vista.html.

  If you have trouble with the search after you move the files, then rebuild the index: http://www.tech-recipes.com/rx/2103/vista_rebuilding_the_search_index/.  Here is an article on how to use Indexing Options in Vista that may be useful for you: http://www.vistax64.com/tutorials/69581-indexing-options.html.

  If the above does not help, your problem seems to relate to the image of the files/folders and their interactions with Media Center (which operate on different other folders).  Please repost your question in images and video Forum at: http://social.answers.microsoft.com/Forums/en-US/vistapictures/threads where the people who specialize in issues of the image will be more than happy to help you with your quesitons.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.