Move the engine and perform a measurement (thorlabs motors and drivers)

Hello world

I was just born in this world of Labview and I m quite lost. I´ll explain my situation:

Queue BEFORE the start of the measurement time is something that you must do it manually because it is up to the user.

Until how long to wait for the measurement of complete, the manual includes many examples of the use of registers and implements buffer to find out when the measurement is finished using a linear scan (this is how I do it).  The idea is to set buffer equal number of datapoints (say 100 on your beach IV), ask what to measure (current, voltage, both) and the records to see when the buffer is full (say all 100 to 500 ms) election.  Let the keithley 2400 settle tensions for you on the specified range and returns the set of data, once completed.

As far as when the movement is finished, you will have to see if there is a way to detect that your equipment (stick otherwise with the late pre programmed).   If they are lit IV measures, you could do the following.  The ABSENCE of any power source and measure the current.  Check periodically after the movement commands are sent.  Once you measure a current, the CDC for the cell, you must contact.

For data storage, use the shift on the state machine itself registers.  Erase the registry when starting an analysis, then insert each measure if it is taken (table 2D or array of clusters).  Another possibility is to use another while loop to back up data (a consumer) with the data being past in a queue and added to the file after each scan (this will help if you are concerned about breakage resulting from data loss).  After each measurement, queue the data to a queue managed by the consumer.  (you will need to keep track of which file to add data to).

Tags: NI Software

Similar Questions

  • Microsoft Fix Center 0 X 80092003 error message when you try to fix the hardware and drivers, the program does not work

    Microsoft Fix Center 0 X 80092003 error message when you try to fix the hardware and drivers, the program does not work. I use Windows Vista Home top.  Please provide me with a fix for this problem. Thank you

    Hello

    What type of material is actually causing the problem? Is there more information the Fix It center offers you?
    I would have a look at the article I have below the link and go ahead and run a update of Windows on the PC.
    I hope this helps.

  • Reading data from txt file and move the engine for the data

    At this point, I had the table and I already read txt file and I want to read the data in table and separate the corresponding element in 3 parts (3 axes: X, Y, Z) and I was able to make the transmission of data to move the motor in this position. and the treatment will be repeated after completing the first point

    Hey, the Index Array function may be what you are looking for. Here is the link to the documentation for this function.

    Function table index

    https://zone.NI.com/reference/en-XX/help/371361L-01/Glang/index_array/

  • "Is it possible to move the date and in the plateau of the Start button?

    I keep the tasbar hidden on the left side of the screen. The time and date are down and I would like to have them next to the 'Start' button at the top. Is this possible?

    I would also like to know how to create and add sound events in Windows. Is this possible?

    Hi RobertLobo,

    By default, you can't fix it, but you can try to search for programs that customize the taskbar.

    Please use your favorite search engine and browse for such a program that is used to.

    Note: This response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there. There are the dangers inherent in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet.

    For more information about sound events, see:

    To assign sounds to program events

  • Windows Explorer crashes with move the file and lock MGP all MS Office upward when "save under" or move in the W - XP Pro - SP3 directory

    I can't make a "save under" with any office of PGE and only lift lock W Explorer with most activity file except moving deeper in dir.  I tried many things to fix, but do not provide me with XP disc and cannot reinstal Windows from Dell.

    Hi Tdonone,

    Looks like there could be a problem with the hard drive. its certainly worth running some tests on if possible. It is a dell machine you may be able to run a hard drive test when the computer starts by using the f8 key, but if not you must download a free software called theultimatebootcd and burn it to a cd and then start the computer on the cd and use the software on the disk to perform checks on the hard drive. To help do this see here -http://www.mypchealth.co.uk/GuideTests.php

    MyPcHealth

  • move the files and copy them

    Ten Windows is annoying me in many ways and so did windows 8 but it is the most painful. I have a lot of files in a folder and you want to move some but not all somewhere else. So I start to select the ones I want to move holding the key ctrl while I select. Once I have selected perhaps 8 or 9 the system copies all of them there in the folder where they are already! Why it assumes that anyone would do such a silly thing and how can I make him wait to be told what to do?

    Post proposed by the facilitator for the appropriate forum placed

    You need a firmer hand.  Now the Ctrl key while you drag a file over 4 pixels will cause a "copy."  This was true on all versions of Windows forever, but if you have a new screen super-HD, 4 pixels is very small amount of space, so it can be very easy to accidentally only drag away when you simply by clicking to select.

    You can go to the 'View' menu at the top and select the option 'use cases' and use them instead of the Ctrl method.  And then selecting multiple files is easier and given that you use the Ctrl key you can not accidentally cause a copy.

    There is also a more advanced to go into the registry and set the threshold of 'slide' to be more than 4 pixels.  For example, you could do it 60 pixels and then you will need to drag the width of an icon (icon of average size is 64 pixels) before that this would trigger a copy.  The instructions for this are on line (since it has been the same for 30 years, you can simply use instructions, it works on any version).

  • How to move the ball and chain together?

    I created a bunch of balloons 3D and applied the preset wiggle individually to each ball. The strings are also different with each of the others that I have related to the respective ball but cannot work out how to apply for balloon wiggle and channel "move together". At the point where the ball moves in a direction and strings in another even if they have the same settings.

    Could someone please advise how to do the ball and chain squirm together?

    Thanks in advance

    Tutorial a zillion years here on the kite. It might as well be a balloon. I don't know why the QT link is broken, but this is a update of project CS5.5 folder for you to watch.

    Here's the movie:

  • What is going on??? MY screen goes up and down control when I move the cursor and extends and shrinks when I move the cursor on the screen.

    When I move the cursor to the top or the bottom of the screen literally flies upwards or downwards. When I move the cursor through the scree, it expands or shrinks.

    Try disabling hardware acceleration in Firefox.

    You may need to also a (hardware) problem with the mouse or the mouse driver.

  • Move the taskbar and start menu

    Somehow the menu task bar and start to settles at the edge of the right hand of the screen. How can I get the taskbar to the bottom and the ti back on the start menu on the left side?

    Right-click on the taskbar and make sure that it is no longer blocked. Take an empty place and slide it downwards. Lock the taskbar. Bruce Hagen
    MS - MVP October 1, 2004 ~ September 30, 2010
    Imperial Beach, CA

  • Move the 'Apply' and 'Reset' buttons

    Hi guys

    I'm obiee 11.1.1.8.1 and I am struggling to find the solution or invites to go down buttons apply and Reset on the dashboard.

    Help, please

    In 11.1.1.7, I would do like this:

    Look at the HTML code of the page to identify the structure and CSS setting the buttons on the right.

    This is easy: there is a class does exactly cela.

    Add a block of text in the page just before the guests that contains this code:

    (check the box 'contains the HTML markup')

    Fact!

    If you always want your button centered or left-aligned you can also edit the file views.css to your custom (new: personalized!) style/skin and this is the new default position of the buttons (on each page using the style/skin).

  • How to move the functions and procedures of packages in a schema?

    Hello

    I have less than the needs for a work at home and my question is if anyone can point me in the right direction to find documentation that can help me solve below. Any information will be appreciated. Thank you.

    Write procedures and functions (included or not in packets) as .txt or .sql scripts. Once they have been launched in Developer SQL they should, in addition, the functions and procedures of packages in the current schema. If the current schema contains only 2 packages, pac1 (p11, p12 procedures and functions f11, f12, f13) and pac2 (contains the p21 following procedures, p22, p23 and f21 and functions f21 (case of overload), running the scripts produce the following effects:)

    • Procedures p11, p12, p21, p22, p23, and f11, f12 and f13 functions will be created in the current schema.
    • PAC2 will contain 2 instances of the function of overload-f21; they will be kept in the package, without be created in the current schema. If all overloaded procedures/functions will be kept in their original packaging
    • If pac1 contains variables, cursors, and public types, keep us only the details of the package (and remove the body); usually if the packages contain no overloaded functions or procedures the body will be removed and if no variable, cursors, types of public then we will remove the header.
    • If in the triggers, procedures and functions we will call procedures/functions packages (procedures and functions moved into the current schema) they reference will need to be updated (via editing the body or recompilation) for example if pa1.p12 will be replaced with p12.
    • Scripts must have numbers in the next series (01... n) and the characters that explain the content.

    My only advice would be to remember that these are public forums and if YOU can find them, therefore cannot your instructors.

    In addition, those are horrible procedure names and function

    This mission seems to be around to overload the pl/sql objects and... prioritize a research on Oracle documentation around overhead and legacy
    http://docs.Oracle.com/CD/B28359_01/AppDev.111/b28371/adobjplsql.htm#i21148

  • Need to update the BIOS and drivers for Satellite Satellite Pro A10

    I have a Toshiba Satellite SPA10 model num E = 09VYL-PSA15-EN. I searched everywhere but can not find update BIOS and drivers for this model of laptop.

    Please provide me with a link.

    Hello Debbie

    There is no such thing as SPA10 satellite. You either have Satellite A10 or P10. Please check on the label at the bottom of your laptop. Correctly identify your laptop model and you will find everything you need on Toshiba download page.

  • Question about updating the BIOS and drivers

    Hello

    First time user. How will I know if I need to update bios and drivers? I don't want to go crashing my system, just because Toshiba say these items are available for my laptop! They were probably in the updates of windows?

    Help, please.

    Hi Andy

    Welcome to our small community
    First a little advice you should always write the name of your laptop.

    OK now, to you in general I have a question would not recommend to update anything if you laptop and operating system is stable and you don t have problems.
    Of course the update of the driver is not risky, but I would only run updates some compatibility problems with 3rd party software or hardware appears.

    The update of the BIOS is risky. Wrong or bad BIOS update procedure could damage the ROM module on the map. So be careful.

  • HP Pavilion dv6 Notebook PC: restore the system and drivers

    Hello. A few days ago I faced a bad experience with my laptop HP Pavilion dv6 Notebook PC. System crashed. At any time, I tried to turn it on, an error message appears and the system was blocked. The message was: FILE: \BOOT\BCD status 0xc000000f, asking for the disc of Windows 7 system running. But the system disk did not run at all. I checked the situation and found the hard drive with 6 partitions instead of 2. I found a named partition BOOT (X which was a replica of C:.)  When I tried to restore the system with the recovery disc, something has obtained control of the recovery disc, so that C: might not be formatted; nor was X:. Also, I tried to cancel the file in X: but disc was protected and does not allow changes. If only I could get my uninstalled hard drive and all partitions have been cleaned. I got my hard drive cleaned perfectly, but my recovery disk can be installed correctly. So, the system has not yet restored. My question is: what should I do to get my laptop with the system restore? any ideas?

    When you request support, please provide the number full name or product model of the HP computer in question. HP/Compaq made thousands of computer models. Without this information, it can be difficult, even impossible to help you solve your problem.

    The information requested above are at the bottom of your computer or inside the battery compartment. , Please do not include your serial number. Please enter the product/model information in the HP Online Support page for consumers , and/or post it here for our review.

    Based on the age on your computer, it could come from the factory with the scores 5 or more. It is common on newer computers that use UEFI and GPT partitions. "Windows 7 system disc", the computer asking wass is a Windows 7 repair disc or a Windows 7 installation disc. None of these discs come with your HP computer and must be downloaded or created in Windows.

     

    Start by using your HP recovery disk set (should be DVD 3 or more). Insert the #1 disc and restart your computer to start the process. Insert the remaining disks as requested, until the recovery is complete.

     

    If this does not work, and you can read the product key 25 character Microsoft Windows 7 on th COST Microsoft attached to your computer, see "How to install Windows 7 without the disc" for download Windows 7 SP1, create the Windows installation DVD and install Windows 7.  If you prefer to install Windows 7 from a USB Flash drive, please download the Windows 7 USB/DVD download tool to create a Windows 7 SP1 USB Flash Drive. After the installation of Windows by using this method, you will have is more HP or software customizations. You'll also need to identify and download the drivers for hardware devices that Windows 7 does not already provide drivers for.

    If you have any other questions, feel free to ask.

    Please click the White Star of KUDOS to show your appreciation

  • The coprocessors and drivers

    Exactly what are the coprocessors and how do I know which drivers I need.

    Hello

    This should help you:

    http://en.Wikipedia.org/wiki/coprocessor

    _________________________________

    What drivers do need it?

    You should get your software driver from your computer or hardware manufacturer, not through Windows Update (with the exception of updates from Microsoft Hardware).

    Access the site on your computer or equipment manufacturing > Driver and Software Support Section > search your computer or hardware model number > then your operating system > locate the correct drivers > download and install.

    See you soon.

Maybe you are looking for