move the files and copy them

Similar Questions

• Project Manager hangs during fired fresh files and copy them to the new location

  Hello

  Any project I have which includes a .mts file captured with a Panasonic GH1 camera causes the project manager in Premiere Pro (CC 2015 edition) to hang (several minutes and ends by hangs) when I do a "collect files and copy them to a new location. It creates a "xxxx. MTSBDMV' with a 'STREAM' record fo RL first file, but that is it. I can even reproduce with a new project with a single sequence, single clip.

  I'm under Premiere Pro CC 2015 edition on a Windows 10 machine. (I tried before 2014 CC edition WIndows 7 as well, same result, but I have not created a test case).

  An example of project (1,3 Mo) can be found at: Test_GH1_footage_collect_files_crash.zip - Google Drive

  Any suggestion for a solution or workaround are much appreciated.

  Thanks in advance,

  Arjan Mels

  Hi Albion,

  Thanks for your message and anxiety. I downloaded your sample project and media and was able to replicate your issue.

  Any project I have which includes a .mts file captured with a Panasonic GH1 camera causes the project manager in Premiere Pro (CC 2015 edition) to hang (several minutes and ends by hangs) when I do a "collect files and copy them to a new location. It creates a "xxxx. MTSBDMV' with a 'STREAM' record fo RL first file, but that is it. I can even reproduce with a new project with a single sequence, single clip.

  I don't know why these images give you so much trouble, but there are a few things to check.

  1. Where is the folder for multimedia file structure? All I see is the raw. Clip of MTS.
  2. In general, you copy all the SD card to your computer HD, then ingest via the media browser
     1. This allows all the metadata to clips to be implemented with the clip.
     2. The clip needs this metadata so that it works normally.
     3. Many publishers of band on the metadata by choosing File > import and do not ingest correctly via the media browser

  I suspect that this could be at the heart of your problems. You could try a try and ingest the images correctly, so try and move the project with the project manager. If it still does not work, please file a bug herereport.

  Once I transcoded your footage to ProRes LT using Adobe prelude, I could ingest images, create a sequence, then moved the sequence and associated media without problem.

  Thank you

  Kevin

• import photos from usb in the files and store them in folders

  I have pictures files created on a pc and stored on a USB key.

  I want to create a library for these pictures and retain their position in folders

  I imported the Photos, but they are sorted by date with no option to change.

  Is there a way to keep records and bring them to Photos?

  Pictures folders cannot contain pictures, only the albums containing photos.  There is an Applescript script in the Photos for Mac usage tips section which allows you to import the pictures folders from your hard drive in the library of Photos and make them into albums with the same name as the folder.  You can get it here: Photos for Mac: File Import of Image files in the library as Albums

  The Photos window sorts the photos by date they were taken and are called Moments.  The window of all sorts photos by date imported into the library with the most recent at the bottom of the window.

  Moments in Photos are new events, i.e. groups of photos sorted by date of catch.

  When the iPhoto library has been migrated first to the pictures there is a folder created in the box titled iPhoto events and all migrated iPhoto events (which are now Moments) are represented by an album in this folder. Use the Command + Option + S key combination to open the sidebar if it is not already open.

  NOTE: it has been reported by several users that if the albums of the event are moved in the iPhoto Library folder in the sidebar, they disappear.  It is not widespread, but several users have reported this problem.  Therefore, if you want to if ensure that you keep these event albums do not transfer out of the iPhoto events folder.

  Is there a way to simulate events in pictures.

  When new photos are imported in the library of Photos, go to the smart album last import , select all the photos and use the file menu option ➙ New Album or use the key combination command + N.  Call it what you want.  It appears just above the folder to iPhoto events where you can drag it into the events in iPhoto folder

  When you click on the folder to iPhoto events, you will get a window simulated of iPhoto events.

  Albums and smart albums can be sorted by title, by Date, with the oldest first and by Date with the most recent first.

  Tell Apple what missing features you want restored or new features added in Photos Photo-Applefeedback.

  

• Move the files and folders in PSE8 structures

  I have a new computer with a lot more hard disk space.  So now I want to pass on 2 000 photos in the organizer of an external hard drive to my local drive.  Easier to work with my photos this way, and I have an automatic backup of my hard drive for storage off site of the internet.

  When I tried to use the file-> Move feature, the moved files but not the structure of underlying files.

  Yes, my photos are marked in the Organizer.  But I want to preserve the file structure, too.

  Is this possible?

  Jim, San Francisco

  Jim,

  You can move your files to the folder view structures in the Organizer. Just drag the folder parent in browser left to the destination parent folder.

  Let me know if it works for you.

  Kind regards

  Vaishali

• Windows Explorer crashes with move the file and lock MGP all MS Office upward when "save under" or move in the W - XP Pro - SP3 directory

  I can't make a "save under" with any office of PGE and only lift lock W Explorer with most activity file except moving deeper in dir.  I tried many things to fix, but do not provide me with XP disc and cannot reinstal Windows from Dell.

  Hi Tdonone,

  Looks like there could be a problem with the hard drive. its certainly worth running some tests on if possible. It is a dell machine you may be able to run a hard drive test when the computer starts by using the f8 key, but if not you must download a free software called theultimatebootcd and burn it to a cd and then start the computer on the cd and use the software on the disk to perform checks on the hard drive. To help do this see here -http://www.mypchealth.co.uk/GuideTests.php

  MyPcHealth

• Always backup failed. due to files corrupted. Error message 0x800703F9.How to find the file and fix them?

  Last backup completed in September - how can I save now please

  Hello
   
  1. you remember to make changes to your machine before the problem?
  2. you have any third-party backup utility installed on your computer?
  3. What are you trying to backup?
  4. that you make a system image backup?
   
  Try another backup file and check.
   
  Follow the steps and check if that helps.
   
  Step 1:
   
  I suggest that you run SFC analysis and check if the problem is related to the file system damaged or missing.
   
  Step 2:
   
  Check your hard drive for errors
  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors
   
  Warning of Chkdsk.
  Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Can I use Lable 8.6.1 to extract the files and manipulate them using NI_SCC.lvlib

  I'm trying to generate some configurations and documentation files that I want to manage with SVN.  The NI_SCC.lvlib there hooks for this?  If so is there an example I can look at?  My main problem is the references (refnum project)

  Any help would be great!

  Thank you

  Rich

  Yes, you can use the interface of NOR.

  However, you will need to use an additional software module to communicate with a server SVN (pushOK SVN).

  Take a look at the connectivity-> Source Control palette.

  Tone

• I can not move the files to a folder in windows XP, only to copy them, and I get the windows error. This happens on any file or folder.

  I use XP Pro SP 3 and I'm having a problem with moving the files from one folder to another, no matter where the folder or files. If I try to move a file, it crashes and it cannot be opened or used. If I move a folder, then crashes all the contents of the folder, and I can't even open the folder, it tells me access is denied, this nothing else. If I try to delete the file, then I get a prompt to error telling me that the file or folder is not accessible, and that access is denied and "make sure that the disk is not full or write protected." If I try to move the files corrupt in another folder, this time I get the message "Unable to move or replace" the file in question and "make sure that the disk is not full or write protected." If it is a document as a text file, then I can open the file and there is a prompt indicating that access is denied. I can then use the text document and save something, but if I close the document and then try to reopen it, all the changes are lost.
  It is not this problem if I move the files to an external device or disk drive.
  I am running as an administrator.
  Right now, if I need to move a file, I copy it to its destination, which is possible and then delete the original file. With the help of a release program was the only way I could delete these files, which could no longer be used.

  Hello Closrapexa, welcome.

  1. do you have this problem started recently?

  I recommend trying the system restore to bring the system back to a State before the problem started. Try this:

  1. click on START

  2. click on "all programs".

  3. click on "Accessories".

  4. click on "system tools."

  5. click on "system restore."

  6 follow the prompts shown to restore your system to a date before the problem started. Although the system restore does not target the personal data, it is recommended that you back up all data such as music, photos and documents in case something is not bad.

  Let us know what happens

  Thank you!

  Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Unable to import photos from an SD card. CAN copy a file from the SD card on the desktop and the view. can display the file to the SD card. When trying to copy or move the file to a folder, I get an error message: cannot copy IMG_0242: the parameter is

  I tried to change the attributes for the file I copy TO remove the READ ONLY check.  I apply, say ok but when I open it READ-ONLY file is marked again.

  Any help would be appreciated.  Thank you

  I tried to change the attributes for the file I copy TO remove the READ ONLY check.  I apply, say ok but when I open it READ-ONLY file is marked again.

  Any help would be appreciated.  Thank you

  =============================
  I do not think that the 'Read only' attribute of your
  file is the problem... in fact, it is typical.
  All files on my XP Pro system have a
  Square marker (not checked) to playback
  Only the check box.

  If you want to experiment the following article...
  explains how to change the read-only attribute.

  (326549) you cannot view or change the
  Read-only or system attributes
  in Windows Server 2003, Windows XP, in
  Windows Vista or Windows 7
  http://support.Microsoft.com/kb/326549/en-us

  More information in the following article:

  Why can't erase or reading the value
  Only attribute checkbox on a folder?
  http://www.jimmah.com/Vista/security/read_only_folders.aspx

  Now for the photos... lets make an experience.

  Open your folder my pictures and create a new folder...
  File / new / folder... (more on this shortly)

  Insert your SD card into your Media Player. Do not forget
  to slightly press the card at the bottom of the slot.

  If the Autorun screen opens, close it.

  Reach... My computer or on the removable click
  Disk that corresponds to the location of your card is in.

  In the menu... Choose... Explore.

  You should be able to see the directory of the card.

  Open the folders and find pictures.

  Reach... Edition / select all... then... Edition / copy.

  Right click on the new folder that you created in my
  Images, text and the menu... Choose... Dough.

  Transfer files or you still receive the error?

  John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Is there a way to copy the drivers and setup of the drive from the computer and transfer them to the reader of the dead computer?

  Separated from this thread.

  Is there a way to copy the drivers and setup of the drive from the computer and transfer them to the reader of the dead computer?

  Hello

  You cannot copy the drivers installed anyway.

  Saving your files:

  You can remove the hard drive and put it in a hard drive USB enclosure > plug it into another computer > and try to read and copy your data in this way.

  See you soon.

• How can I copy/move the files/folders to other files/folders in windows 7?

  Can you move or copy files or folders with the help of drag-and - drop in windows 7?  Can move or copy files/folders by right click Select copy/move files drop-down menu files, select the file and click ok in windows 7?  It's the easiest way to move/copy large files.  With fall and drag it moves only files unless it's external media then it will copy. What do you do if you need the same files in different folders?

  This is what you need:
  http://www.thewindowsclub.com/ultimate-Windows-Tweaker-v2-a-Tweak-UI-for-Windows-7-Vista

  Download and run as administrator and click "other settings"... If you find my answer helpful, please click the button "Vote as helpful"! Thank you! My Blog

• After you create an action to reduce the size and convert them to JPEG format, how to eliminate the word "copy" of each image name?

  After you create an action to reduce the size and convert them to JPEG format, how to eliminate the word "copy" of each image name?

  You can batch process using the image processor script and no user action should still be included in the process.  Check out our menu file > Scripts > image processor.

• I'm trying to extract the strings and load them into a text-helpplease file

  I'm trying to extract the strings and load them into a file text without space between them - see below
  
  p_csa = ISCC M4 DP
  
  where p_csa is a tring to load into a text file
  
  
  
  Code:
  
  SELECT SUBSTR (p_csa, 0, 0) INTO v_telco FROM DUAL;
  SELECT SUBSTR (p_csa, 1, 4) INTO v_comp FROM DUAL;
  SELECT SUBSTR (p_csa, 5.3) INTO v_csa_prefix FROM DUAL;
  SELECT SUBSTR (p_csa, 8, 4) INTO v_csa_type FROM DUAL;
  
  fileidinvoice: = UTL_FILE. FOPEN (c_data_location, filenameinvoice, 'W');
  fileidlog: = UTL_FILE. FOPEN (c_data_location, filenamelog, 'W');
  
  UTL_FILE. PUT_LINE)
  fileidinvoice, v_telco | » '|| v_comp | "|" | v_csa_prefix: "| v_csa_type);
  
  
  -the content of the file-
  
  ISCC M4 DP
  
  =====================
  I want to remove the space between the chain above for the content of the file should look like this:
  
  -the content of the file-
  
  GCSIM4DP

  Hello

  976253 wrote:
  I'm trying to extract the strings and load them into a file text without space between them - see below

  p_csa = ISCC M4 DP

  where p_csa is a tring to load into a text file

  Code:

  SELECT SUBSTR (p_csa, 0, 0) INTO v_telco FROM DUAL;

  Is it always NULL?

  SELECT SUBSTR (p_csa, 1, 4) INTO v_comp FROM DUAL;

  You don't need the double table much in PL/SQL. You can simply say

  v_comp := SUBSTR (p_csa, 1, 4);
  

  Almost all integrated single-row functions work in PL/SQL. (NVL2 is the only one I know who does not work in PL/SQL).

  SELECT SUBSTR (p_csa, 5.3) INTO v_csa_prefix FROM DUAL;
  SELECT SUBSTR (p_csa, 8, 4) INTO v_csa_type FROM DUAL;

  fileidinvoice: = UTL_FILE. FOPEN (c_data_location, filenameinvoice, 'W');
  fileidlog: = UTL_FILE. FOPEN (c_data_location, filenamelog, 'W');

  UTL_FILE. PUT_LINE)
  fileidinvoice, v_telco | » '|| v_comp | "|" | v_csa_prefix: "| v_csa_type);

  What are you trying to do here? For example, what you're trying to put between c_comp and v_csa_prefix?

  -the content of the file-

  ISCC M4 DP

  =====================
  I want to remove the space between the chain above for the content of the file should look like this:

  -the content of the file-

  GCSIM4DP

  If you don't want space, then only concatenate all the spaces in the string before you write it and REPLACE allows you to delete all the spaces that have been copied from p_csa. For example:

  UTL_FILE.PUT_LINE ( fileidinvoice
              , REPLACE ( v_telco || v_comp
                                      || v_csa_prefix
                            || v_csa_type
                     , ' '
                     )
              );
  

  I guess you need the v_comp of separate variables, the v_csa_prefix and the v_csa_type for something.

  I hope that answers your question.
  If this isn't the case, after a complete script that people can run to recreate the problem and test their ideas. Display the results you want (in other words, the contents of the file created).
  Always say what version of Oracle you are using (for example, 11.2.0.3.0).
  See the FAQ forum {message identifier: = 9360002}

• I have copy of old tbird and seamonkey e-mail files with the files and emails for each. I need to add to new tbird install. can not find a way to do it. Help

  I have copy of old tbird and seamonkey e-mail files with the files and emails for each. I need to add to new tbird install. can not find a way to do it. HELP PLEASE. previous e-mail files are under mail then mail.earthlink* .net and each of the five mail .net is an email address I have. I can't find a way to identify each file by email to the specific email address (IE mail.my E-mail name.net) so I can copy the files and emails from the past to the email addresses now under tbird. previous installed e-mail identities may not be the current configuration of e-mail files in tbird. I think that I must be sure that mail.name.net matches the previous mail.name.net to be able to copy and paste the old to the new. is there a way to find the file name correct the old email and correspond to the new? all my emails very important information are mostly in the old mail electronic id and must be available in the identification of email again (but same) how can I do this?

  http://KB.mozillazine.org/Importing_folders

  Use this module.

  https://addons.Mozilla.org/en-us/Thunderbird/addon/ImportExportTools/

• What is c? -osxupdcombo10.10.5.dmg - he started to automatically download on my mac and I stopped it... This is a copy of the name of the file and I have no idea what it is?    osxupdcombo10.10.5.dmg

  What is this file? -osxupdcombo10.10.5.dmg - he started to automatically download on my mac and I stopped it... This is a copy of the name of the file and I have no idea what it is?    osxupdcombo10.10.5.dmg

  This is the last update to Yosemite.

  If you do not run 10.10.5 then you run to certain security risks.