Move the update start and end tab does not work

Similar Questions

• Table, shuffle a part of a table using start and end Index does not work properly

  Hello
  I used a method to mix a part of an array, but I noticed that it does not work very well.
  When I run this method sometimes I empty array values.

  So if you try the example below and test out a few times would get you a good result but sometimes a wrong result.

  
  For example, when I run the present I get in my trace output:

  a, b, c, d, g, e, f (here after the g it won't)

  a, b, c, f, g, d, e (here it goes right)

  a, b, c, d, g, f, e (here I'm not)

  var myArr:Array = ['a', 'b', 'c', ', 'e', 'f', 'g'];

  function shuffle(myArray:Array,_startIndex:int_=_0,_endIndex:int_=_0):Array {}
  if(endIndex == 0) endIndex = myArray.length - 1;
  for (var i: int = endIndex; I > startIndex; i--) {}
  var randomNumber:int = Math.floor (Math.random () * endIndex) + startIndex;
  var tmp: * = myArray [i];
  myArray [i] = myArray [NombrAl];
  myArray [NombrAl] = tmp;
  }
  return myArray;
  }

  trace (shuffle (myArr, 3, 5));

  No one knows where he goes wrong and why nobody on the web discovered this problem previously, because
  When I googled on this topic, I found other methods that also sometimes fail.

  Kind regards
  Chris.

  var myArr:Array = ['a', 'b', 'c', ', 'e', 'f', 'g'];

  function shuffle(myArray:Array,_startIndex:int_=_0,_endIndex:int_=_0):Array {}
  If (endIndex == 0) {}
  endIndex = myArray.length - 1;
  }
  for (var i: int = endIndex; I > = startIndex; i--) {}
  trace (i)
  var randomNumber:int = int (Math.random () * (endIndex + startIndex-1)) + startIndex;

  var tmp: * = myArray [i];
  trace (i, randomNumber)
  myArray [i] = myArray [NombrAl];
  myArray [NombrAl] = tmp;
  }
  return myArray;
  }

  trace (shuffle (myArr, 3, 5));

  There were a few issues going on here.  The first is that you used the index end to the random number, but should be the difference between the beginning and the end.  the second is the > = start index in the loop.  give this a go.

• Since the upgrade of my new tab does not work, I press on the + icon and nothing

  Since the upgrade of my new tab does not work, I press on the + icon and nothing

  Try Firefox Safe mode to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that disables certain parameters, disables most Add-ons (extensions and themes).

  If Firefox is open, you can restart Firefox Safe mode in the Help menu:

  • In Firefox 29,0 and above, click on the menu button

    

    click Help

    

    then select restart with disabled modules.

  • In previous versions of Firefox, click on the Firefox button in the upper left of the Firefox window and click help (or click on help in the Menu bar, if you do not have a Firefox button) and click on restart with disabled modules.

  If Firefox is not running, you can start Firefox in Mode safe mode as follows:

  • On Windows: Hold down the SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac: Hold the option key during the startup of Firefox.
  • On Linux: Exit Firefox, go to your Terminal and run firefox-safe-mode
    (you may need to specify the installation path of Firefox for example/usr/lib/firefox)

  When the Firefox Safe Mode window appears, select "start mode safe."

  

  If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. Please follow the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. This might help others with the same problem.

• The update to iOS 9.3 does not work on my iPhone 5?

  Ive updated but does not work night shift. I don't know why?

  Because this isn't a feature supported on the iPhone 5...

• 'Open the link in a new tab' does not work. I tried with all disabled add-ons and it still does not work.

  When I right-click a link and select 'open in a new tab' and 'opens in a new window', nothing happens. In addition, nothing happens when I type a query in the search bar and press ENTER. I tried to restart firefox in safe mode and disabling all add-ons, but the problems continue.

  The setting in "tools > Options > tabs: open new windows in a new tab instead" is for links that specify a target window (for example, target = _blank) to open the link.
  This option allows to divert these links into a new tab instead of a new window.
  Links that do not specify a target always open in the current tab, unless you redefine that with a middle-click or Ctrl (Mac: Cmd) left click (new tab) or a left click UPDATE (new window) or via the context menu.

  You can check if you have the XML files including Google's default search engine in the browser\searchplugins file in the Firefox program folder.

  If this isn't the case, then you need to reinstall Firefox.

  Try to delete the file search.json and possible search - metadata.json and search.sqlite files in the profile folder of Firefox to reset the default search engines.
  You can use this button to go to the Firefox profile folder currently in use:

  • Help > troubleshooting information > profile directory: see file (Linux: open the directory;) Mac: View in the Finder)
  • http://KB.mozillazine.org/Profile_folder_-_Firefox

  Firefox will rebuild the file search.json from the default search engines in the folder "browser\searchplugins" in the Firefox program folder and the searchplugins folder in the Firefox profile folder.

• Do space bar, drag to move the area of framing tool around does not work

  Space bar or drag the tool with selection Rectangle is not working with photoshop/illustrator CS6 CC all of a sudden. I have 2013 mac pro, is that someone else knows this?...

  I solved the problem. In fact, it was a recent antivirus, I had installed on my mac pro. Once I uninstalled everything was good again...

• Synaptic pointer is no longer scrolls or zooms, moves the cursor. My HPSimple Pass does not work either.

  I have a HP Pavilion dm4 (2010), and there are 3 days my synaptic pointer stopped through the operation device of slide two fingers to scroll and zoom by opposition or reposition figures. This happened at the same time I had a rep of Norton Antivirus instruct me to delete temporary files on my computer because my computer iliteracy. After I deleted what I was asked to delete, both my pointer and simplepass finger drive has stopped working.

  How can I fix it? Or do I remember Norton?

  Go to device-> slot Manager "Mice and other pointing devices" double click on your Synaptics pointer-> click on the driver tab, if the button "Roll back driver" is active, click on it or click the button 'Update driver... '. "-> choose"Browse my computer for driver software ".

  For your fingerprint reader SimplePass see this:
  Install and use the HP SimplePass fingerprint reader
  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c02518653&tmp_task=useCategory&LC=en&DLC=en&cc=us&destPage=siteHome&tool=&query=DM4-1150ea&product=4314524#n178

  You may need to download your Synaptics and SimplePass:
  Support for drivers &
  http://welcome.HP.com/country/us/en/support.html
  Enter the model number of your product HP Pavilion dm4
  Then select from the list
  Select your operating system
  Choose your drivers under driver, keyboard and other pointing devices and software security

  I hope I could help

• Instaled lifecam vx5000 twice and put the lastest download and product still does not work. OS is win xp.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hello Wilm. Earl,

  Here are the system requirements of the LifeCam VX5000:
  Windows® XP with Service Pack 2 (SP2) or later:
  Intel Pentium® 4 1.8 GHz (Pentium 4.3 or higher recommended), 2
  56 MB of RAM (500 MB recommended)

  Check and see if your compputer matches these requirements.

  You get error messages when you try to install or when you try to make it work?
  This is a link to the software must be installed.,.
  http://www.Microsoft.com/hardware/download/DownloadResult.aspx?category=ice&type=LifeCam&name=RKA-00001&OS=XPSP2x64&lang=en

  Let us know any other details.

  Thank you

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Windows Police Pro denies access to most of the tools. I can't boot mode safe. Can not get to work Bishop burned CDs by malware, but it does not work. Copied the files on the desktop malware and it still does not work. Does anyone have a solution?

  Other than the inability to get to the the Task Manager, Regedit and Safe Mode there are no further details.

  See the Remove Windows Police Pro (removal Guide) at bleepingcomputer.com

• Option button and associated features does not work!

  Hi Pros,

  I am facing the following problem:

  1.I have an interactive PDF created in Acrobat 9 Pro.

  2 have a few option boxes, each radio buttons be assigned been worth (for example: 1,2,3 etc.)

  3.I have a text box in which the value of the selected option button is displayed.

  4 PDF works fine on my machine.

  5. customer is to have Internet Explorer version 7.0.5 and Adobe reader: 8.2.6

  6. the option boxes and associated features does not work on the client computer.

  7. the text box displays "0" even if we have a radio button with a value of 2 or 1 is selected.

  What is the problem? How can I solve this problem?

  Help, please.

  If you have disabled JavaScript or automatic calculations in Reader preferences, you will get this type of behavior. You can test yourself by changing your preferences (Edit > preferences > JavaScript, Edit > preferences > forms > automatically calculate field values). All calculated fields depend on JavaScript behind the scenes.

• I have two versions of the same book on my iphone and ipad.  I want the same book, so I can study on each device.  I tried to remove the books and start again.  It does not work.  Help.

  I have two versions of the same book on my iphone and ipad, which are not synchronized with the other.  I want the same book on each device, so I can study on one or the other.  I tried to remove the books on my phone, ipad & itunes and start again.  It does not work.  Help.

  Hello david.hogan87,

  Thanks for posting about what is happening. If I understand you correctly, you have a book you want on your iPhone and iPad, but neither is synchronizing correctly to have both.

  Have you checked every device to confirm that the same identifier Apple is signed all three?

  iPhone and iPad: head to settings > iTunes and App Store

  iTunes: on a Mac, it's under account or installed depending on the version of iTunes store.  On a PC, it is also under account, and if you don't see the menu bar, click on the triangle in the upper left corner to view the Bar Menu or CTRL + B on the keyboard.

  If all 3 have the same signed Apple ID, post the version of iOS and iTunes for all three devices here, please.

  Best regards.

• The plus sign next to my tab stopped working: when I click on it nothing happens. I tried uninstalling and reinstalling and it still does not work.

  The sign + to add a new tab has suddenly stopped to work earlier. I tried uninstalling and reinstalling and it still does not work. What can happen and how to fix it?

  Hello

  The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
  Note: This will make you lose all the Extensions, open Web sites and preferences.

  To reset Firefox, perform the following steps:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the button 'Reset Firefox'.
  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  This solve your problems? Please report to us!

  Thank you.

• I just tried to install the Adobe Creative Cloud trail and the apps tab does not work and I tried to uninstall several times and nothing. Any suggestions?

  I just tried to install the Adobe Creative Cloud trail and the apps tab does not work and I tried to uninstall several times and nothing. Any suggestions?

  An error keeps poping up on creative cloud without work and it's really annoying that I can't use it anymore or even try anything at all.

  Help, please

  Using creative cloud | Download error in the applications tab of Creative Cloud Desktop Application

• As some Menu items: Modules, Help Menu and Pocket Extension does not work after update to 17.0

  As some Menu items: Modules, Help Menu and Pocket Extension does not work after update to 17.0

  This may be caused by the Tab Mix Plus extension

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

  • Do not click on the reset button on the start safe mode window or make changes.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  You can try to install the latest Dev version of Tab Mix more if you use this extension.

  See the sticky on the forum of Tab Mix Plus:

  • http://tmp.garyr.NET/forum/viewforum.php?f=3
  • http://tmp.garyr.NET/forum/viewtopic.php?f=3 & t = 15740

• new tab (+) does not work after the upgrade to v 23.0.1 forefox

  I had firfox version 22 I guess... Now, today morning I upgraded to v 23. It displays a message from one of the plug-in is not compatible with wud and therefore be disabled. now later I still once downloaded the plug in to check if its works or not but TI worked (as I had already guessed), or its display in modules or plug-ins.

  Now I don't get why the new tab does not work. Not at all. Its so very annoying. I googled the question and tried to reset firefox and the new tab in subject parameter: config. But nothing helped.

  I think that its because of this plug-in I've read somewhere that the parameters can be getting replaced by one of the defective Add-ons.

  Help, please.

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/Firefox/tools > Modules > appearance).

  • Do NOT click on the reset button on the startup window Mode without failure.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  You can use the SearchReset extension to reset preferences to default values.

  • https://addons.Mozilla.org/firefox/addon/SearchReset/

  Note that the SearchReset extension runs only once and then uninstalls automatically, so it will not appear on the page "> Firefox Add-ons" (topic: addons).

  If you do not keep the changes after a reboot or have problems with preferences, see:

  • http://KB.mozillazine.org/Preferences_not_saved