Move the virtual machines to new storage device

Similar Questions

• Move the virtual machine to new computer

  I copied the file to the virtual machine from one computer to the other. When I go to open it on the new computer, I get a series of errors:

  «Cannot open vmmon...» »

  "Failed to initialize the surveillance apparatus..." »

  "Could not find a peer valid to connect to.

  Never start the virtual machine.

  The old computer: Mac Pro with VMWare Fusion 3.0 10.6.2

  The new computer: iMac 10.6.2 with VMWare Fusion 3.0

  The new computer used Time Machine to transfer applications and files, except the virtual machines. The ones I copied manually.

  Any suggestions?

  These are all the mistakes with the merger itself... Liklely, you just need to reinstall Fusion 3.

  I would like to uninstall, reboot, then re-install Fusion 3, see if the problem persists.

  If you have shortcuts to the merger or the application itself on your desktop, trash that too...

• 890124. how to move a virtual machine from one storage to another?

  Hello

  I decided to increase the RAM of a virtual machine and storage space in which stood the machine is less than 1 GB, it says that it is impossible to start the virtual machine. So I decided to move the virtual machine to secondary storage which had enough free space.

  How can I make vSphere Client aware of this change? How can I know what's happened? what I need is to boot the machine which is now moved to secondary storage. is this possible?

  THX

  After again moving data store, you must register this virtual machine to be visible in the list at left.

  1 browse the data store and open the corresponding VM folder

  2. Select the .vmx file and right-click.

  3. Select the option "Add to the inventory" and keep clicking Next until you have finished.

  4. now switch on the machine. He will ask a question that you copied or moved.

  5. Select I moved it.

  6. your machine is running.

  And you can see the virtual machine in the list after step 3 itself.

• Expand or move the virtual machine to another partition / hard disk

  I tried to expand my 90 GB disk but nothing changes, i.e. the virtual machine is still to 60 GB. I have VMware Fusion 6 (Mac/Windows 10) and my VM is monolithic mode. In this true HD, I even 50 GB free and I can't increase the amount again in an attempt to rectify this problem and I can not to decrease either. I thought to change the location of the virtual machine to another partition/hd with more space, but I don't know how. So I need little help to choose and implements one of the solutions below:

  - or regularise space for the new amount

  - or move the virtual machine (vmdk) to an another partition/HD

  - or to convert monolithic mode to 2 GB split

  What is the best solution?

  Thanks in advance

  It's help me;

  Resize a Windows Partition with disk management tool

  When you maximize your virtual hard disk, you must also expand partition of your guest operating system to take advantage of the extra space.

  Fusion resizes the partition of the guest operating system when you resize the virtual hard disk. If you hold the Option key when you click apply to resize the drive, you can manually resize the Windows partition. For Windows 8, Windows 7 and Windows Vista you can use the operating system's disk management tool to resize a partition.

  Prerequisites

  Check that your virtual hard disk is large enough to accept the increase in the size of the partition. See resize a hard disk.

  Procedure

  1 right click on computer and select Manage.

  2. double-click on storage.

  3 double-click disk management.

  4 in the list, right click on the partition to expand and select Extend the Volume.

  5 follow the prompts to resize the partition and click complete and the question of the partition in the disk management pane displays its new size.

  6. close the computer management window

• Students cannot "connect/disconnect the virtual machine's CD/DVD devices.

  I will start with this context (and apologies for the wall o ' text): I'm a newbie.  I took the course VMware local community college offers [VMware ESXI Server Enterprise (CIS197)], but I've not yet certified. And I don't have a real experience, except what I have taught myself so far.

  I recently accepted a position of learning associated with the College (think: glorified lab tech). I was tasked to work with stuff from VMware in the laboratory (among other things such as Cisco and Juniper equipment). There is no pass-down information like the previous left the position four months ago.

  We have a single host running ESXi 348481 4.1.0. "We have vCenter Server (5.5.0, 1312298), running on Windows Server (2008 R2, Enterprise Edition).  Access host and vCenter through two different IP, addresses using the vSphere client (either 5.5 or 4.1, using a single application - depends to know if I connect to the host or vCenter).

  At that time, the host is using local storage only (we have plans to change this, but it will take time).  The host is not a production on its own server, because it does not have a school systems.  He does, however, run a number of virtual machines in the lab, students use (Linux, Microsoft, Web design, etc.).  So, right now, I can't take it down.

  I was tasked to create a number of virtual machines that students can use to make the basic labs of Microsoft Windows 7.  So far, I have:
  -Created users, one per student, on the host.
  -Creating VMs, deploy one per student, I have a gold model vcenter.
  -Creation of roles to limit the access of students to just their VM attributed, which they access via client vSphere.
  -Created a Windows Server 2008 R2 domain controller that is also a DHCP server.
  -Created a virtual network, which is accessible only by the Windows 7 virtual machines and is not visible outside the vSphere environment (if I said this right - he does not see the Internet or school network).

  So far, it's all good.

  However, I need to be able to allow students the ability to edit the ISO file on which their VM points in order to complete some laboratories. I guess they would use the button "connect/disconnect the virtual machine's CD/DVD devices" on the taskbar (or console window). It does not work.
  I searched a lot and found that others have had the same problem.  However, all of the solutions I've tried so far have failed.  When they click 'Connect to ISO image on the data... store. "they get an error message means nothing to me,"an internal error has occurred in the vSphere Client. Details: Object Reference not set to an instance of an object. Contact VMware support if necessary.
  The role that I use for students has these settings:
  -Data store > Browse the data store
  -Virtual Machine > Configuration > change the settings of the device
  -Virtual Machine > Configuration > settings
  -A bouquet under the virtual machine > Configuration >
  -Configure CD media
  -Console interaction
  -Connection of the device
  -On
  -Power off
  -(and more, which I don't believe are important to the question)
  -State > create the snapshot
  -State > go back to the snapshot

  I tried "Virtual Machine > Configuration > add existing disk", "Virtual Machine > Configuration > add new disk" and "Virtual Machine > Configuration > add or remove an instrument" with no luck.

  Either by the way, the root account can do all these things, but no other account can - not even a game as an administrator account.

  I've seen mention I have apply the role in the data store.  It is perhaps part of the problem. I can't see the data store when I am connected to the host (wellll, I can, if I click on the host name, then on the Summary tab - but roles do not apply at this stage).  I see is 'Inventory' (which has virtual machines and Pools of resources), 'Rôles' and 'log files '.

  I can see the data store when logged in vCenter. Roles of students, however, are defined on the host computer. If I clone the role of users in vCenter and change this role cloned to have "permissions" that those who are on the host computer and then apply it to the data store, it still does not work.

  So, after all this (which I hope I've included all the necessary information), what can I do to allow the students to change ISO to which they are connected?

  Of course, if I left something, or if someone has a question, please ask.  I want to get this resolved as soon as I can.

  It turns out that I finally found the solution to the problem.

  What 'fixed', it is sufficient to vSphere Web Client to vCenter, which then allowed us to use Single Sign-On (SSO).  This, in turn, allowed us to define users and roles in vCenter (rather than having set them up directly on the host computer) which have then been applied to the VMS of students and also to the data store.

  Now, they can (de-) connect their ISOs at will.

  I find it interesting that vSphere Client (application) shows the users (and the things that they have access to), but it won't let you set of users.

• movement of virtual machines on new server

  I'm fairly new to vmware and operate a very limited plant, but would like assistance.  I have the Essentials package and ESX 4.0 is running on a single server with the virtual machines stored on local hard disks.  I installed a new server ESXi 5.1 and local storage, and I need to move the virtual machines from the old server to the new server.  If it's important, the guest virtual machine operating system are a mixture of linux and windows.  What is the best method to move those VMs?

  Hello

  If you have the two host added to vCenter, you can turn off VMs and migrate virtual machines to another host and data store.

  Since you do not have a shared storage, you must turn off VM to change host and the data store.

  It doesn't matter what OS you are running on a virtual machine.

  Thank you

  Hentzien

• Best way to move a virtual machine to new hardware

  I have a SBS 2011 VMS under ESXi 5.  The material is not enough and performance are slowed down.  I want to spend the SBS 2011 VMS to new hardware.  After install ESXi on the new hardware, which is the best way to move the virtual machine.  It's big enough, and it is a production server - I'm looking for fast and efficient.  What are the most common problems when moving from a virtual computer to new hardware?  Thank you!

  A virtual machine is encapsulated in a set of files, making it easy to carry; You can copy the files from the virtual machine using WinSCP or any other program to the destination host. Register the vmx on the new host and turn on the virtual machine. You may also look @ of Veeam FastSCP for this purpose. I have not had the chance to use it yet, but it's free and seems very popular with the community:

  http://www.Veeam.com/VMware-ESXi-FastSCP.html

• How to move the virtual machine from one cluster to another cluster

  How to move the virtual machine from one cluster to another cluster

  If two Clusters are in the same data center, you could do a 'live' migration or vMotion, if that's the case.   If the virtual machine is turned off, it may be migrated regardless of the data center.

• Storage vMotion - impossible to move the virtual machine

  All,

  I have recently upgraded to version 4.1 ESXi 4.1 U3 of VC2.5 ESX 3 vCenter Essentials - I decided to make my new vCenter server a VM - everything went well on the upgrade so I am now looking to do work on my storage system (EMC Celerra). I have virtually no space on my LUN and my CIFS shares are increasingly full also... However I have a file inside the EMC system which is 6 to size which houses a 200 GB LUN - it's the logic unit number that contains my VM vCenter. What I want to do is... move this vCenter VM off this LUN to local storage, reassign 6 TB to the pool file system and extend the 3 TB CIFS file system and then present the rest of the space as LUNS for VMware. My problem is that I'm not licensed for storage vMotion and they only way I can storage vMotion, VM off the coast of this LUN is to stop it and move it but because it's my vCenter Server I can perform this action by the customer.

  I guess I might need to drill holes in the host using putty to move the vmdk file, but I'm looking for any useful measure to enable me to move this virtual machine.

  Thank you

  If you are not allowed to Storage vMotion, then you can watch using VMware Converter and do a V2V.  Once the VM vCenter has been "copied" in the new destination LUN, it works, make sure that everything is right, then delete the 'old' vCenter VM disk.

• Move the virtual machine from one host to another with shared storage

  Hello

  I have a question on how to move a virtual machine from one ESX 4 host to a host ESXi 5.  These hosts have access to the same shared storage but the ESX 4 host is outside the network and host ESXi 5 is inside the network so vMotion is not an option.  They are in different groups.  I know that there must be an easy way to move this virtual machine, but for the life of me, I can't find it.  I guess I have remove the virtual machine from the external cluster but how to make the virtual machine in the internal cluster?

  Thanks in advance...

  If both host access to the data store even where VM's store, just stop the virtual machine, remove inventory on ESXi 4, go to ESXi 5 vSphere vSphere, browse the data store where the VM is stored, do a right-click on the .vmx file and add to the inventory.

• How can I move the "Virtual Machines" folder to the My Documents folder?

  VMwareFusion is to put the "Virtual Machines" folder in the Documents folder in the home folder (/users/ [username] / Documents), how can I move elsewhere (as/Library/Application Support)? The user Documents folder is not the right place for automated it system files, it is intended for personal documents.

  
  

  I am running VMware Fusion on OS X Yosemite (and the virtual machine is Windows 7).

  You can keep your virtual machines anywhere you want. Here are the steps to move:

  1 exit VMware Fusion. You can stop first of all of your running virtual machines.

  2. drag your virtual computers folder or the individual VM "files" where you / them. Filenames usually end in ".vmwarevm". There is no need to call the new folder "Virtual Machines" - you can call it anything you like.

  3. Launch VMware Fusion. If the library of the Virtual Machine window is not open, open it (Windows menu-> Virtual Machine library).

  4. ensure that all of your icons for the virtual machine are light gray and say "file not found".

  5. right click on each virtual machine in turn, and select Remove. When you are done, leave the window of Machine virtual library empty open.

  6. in the Finder, drag the icons of file virtual machine in their new location and drop them in library of virtual machines VMware Fusion window. Drop them one by one in the original order, you got, or rearrange icons later.

  7. run your virtual machines as before.

  When you create new virtual computers, navigate to the desired file before the Save.

  IMPORTANT NOTE: If you your folder of Machines ~/Documents/Virtual excluded from backups Time Machine, don't forget to change the exclusion to the new folder.

  Time Machine backups are not reliable for virtual machines. You must have another strategy. (I shut the virtual machine down, compress the 'file', and then move the compressed file to a folder that is included in the Time Machine backups. This isn't the only strategy, but it works for me.)

• How to move the Virtual Machine VMWare Workstation 10 to a completely different computer

  I have a laptop that is going to become my 'old' laptop, I bought and am always set up a new computer.

  I have a VM THAT evolution created on the 'old' portable using VMWare Workstation 10.  I installed the software VMWare Workstation 10 on the new laptop computer and am ready to move to the existing VM development since the old laptop again to continue the development of software on the virtual machine to the new machine.

  I never moved a computer virtual from one computer to another, and I guess that all I have to do is to copy and move the folder and all its content from the old laptop to the new, and then I'll be back in business?

  Just make sure it is this simple before doing so.

  Thanks for any input.

  It's as simple as that. When you start in the new machine, it should ask if you copied or moved. Answer that you moved it will keep the same MAC address and you will not be able to connect the two copies at the same time. You copied it saying assigns a new MAC and they both can connect, but a Windows machine can ask to reactivate. Seems to me he asked also to reactivate when I copied it for an Intel system AMD system, but it was a long time ago

  Lou

• Method to move the virtual machines in the data store temporary so I can rebuild pool recommended NFS

  Our current data store is a mounting NFS on Nexenta (zfs), which has a pool, I need to rebuild (migration of raidz2 to mirror striped for performance). Initially, I was relying on the judgment of all virtual machines, create a new pool, copy (cp - r) of the Nexenta console all virtual machines to the new pool, recreating the pool mirror and then copy (cp - r) all the data back.

  I have seen several discussions on this topic and seems like the simplest method would be to use the feature to "Migrate" so that the virtual machines are not fragmented. However in some of my pre-test when I copy a virtual machine between the basins of the Nexenta console it appears (from the data store Explorer) to initially create the vmdk provisioned and then once completed it copy looks too thin.

  I hope that I can simply copy the Nexenta console, using the option "Migrate" in vCenter on each of my 40 MV looks like it would be * quite * tedious compared to the simple issuance of an order of 'cp - r' and leave all the copies of VMs (1.5 to) during the night and then adding them to each host.

  Does anyone have experience with this? Or maybe a way to generate scripts easily (?) the option "migrate" in vCenter?

  Thank you all!

  You can select multiple VMs in vCenter regularly using CTRL + click or shift + click and both migrate them as long as they have the same storage destination.  You can also schedule it as a task.    Add manually each computer virtual back in hand is not less painful than migrating individually, anyway.

• ESXi 4 - move the virtual machine to different hardware

  Hello everyone, I'm new to VMWare. I was wondering if I say ESXi 4 running on a Dell poweredge 2800 dual processor with 2 VM I could take these virtual machines and move them (the moving process no matter as long as it is possible) a dual processor Dell Poweredge 2950 with different RAID card, RAM, CPU, etc, and ESXi 4 is also installed, etc. it would work?

  Thank you!

  Like you, I'm pretty new to VMWare. That being said, I have 2 servers ESXi right now, and I moved the computer virtual from one to the other without problem. I vSphere Essentials, and it was very easy to ' cold migrate "a virtual machine from one server to the other. The host of the virtual machine (white non-liste) origin is simply a HP dc7900 PC with a quad-core processor and 8 GB of RAM. The new host of the virtual machine is a Dell 2850 (non-whtelisted) with 2 processors duo-core and 8 GB RAM. The virtual machine has been the guest of 32-bit OS (Windows XP), while she had no problem. I can't move my Windows Server 2008 VM for your Dell printer, because it does not support 64-bit for the guest operating system (the processors are not compatible VT).

  The only thing that will happen is that Windows (XP, in this caes) will have to go through the process of Validation WIndows again, because there are some major hardware changes, as seen by the operating system. Not a big deal, just soemthing to consider. I also had to re - check my Adobe products on this virtual computer, as I did not have the unvalidate on the virtual machine before moving on to the virtual machine. Adobe also thought that it was a whole new PC, so I had to call & make them validate the installation manually.

• Move the virtual machine to the workstation from 9 to 7 Workstation

  Hi all

  I have created a virtual machine (PBX) on VMWare Workstation 9 and I need to move it to Workstation 7.1.  I tried to create an ovf file using ovftool, but I couldn't expand the FVO on the side 7.1.  Is there anything else I can do to move the machine to the course?

  Thanks for your time.

  Martin

  "You can just copy the file to the virtual machine with all its files, this will keep even the machine virtual UUID and MAC address if you select 'I moved' we ' when you start the virtual machine after you have copied. However, before copy on the virtual machine, make sure that you go to compatibility mode (formerly hardware version) from the 9 VMware Workstation interface.

  André