Move to new PC; DW files are on drive d:

Similar Questions

• Windows 7 unbootable - think my OS files are on drive D:

  I recently bought a new computer that is pre installed with Windows 7. Everything was working fine until I fell asleep and woke to see that Windows 7 rebooted itself (she normally does it after updates install automatically), but instead of the user login screen, I get a screen of system recovery.

  Run the diagnostic tests fails to solve the problem and tells me that Windows can't find my file system operating system and therefore cannot start. Here's the exact message he gives me

  Root cause found:

  No operating system on the disk file.

  Repair action: repair of System Partition

  Repair failed. Error code 0 x 490

  Time of shooting: 327 ms

  However, a few lines, he said:

  Windows directory: D:/Windows

  Not surprising he couldn't find all system files, I have all files on D: OS or do I even have a D drive. I can access cmd and advanced repair settings, but I don't have a Windows 7 disc, this computer everything is new and I have already spent many hours just setting up and installing all my old files, is it possible that I can demonstrate repair system C: as my OS partition/repair the damage without having to repay the PC? I really, really need this PC for my classes at University now and all my files are on it not to mention I just spent hundreds of dollars buying, any help would be really appreciated.

  Hello

  Please continue with the following steps to support in this link...

  http://support.Microsoft.com/kb/927392

  I hope that this information is beneficial.

  Thank you

  Aaron
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Now that my full FCP project, I burned a dvd and everything is fine but I want to download the .mov on YouTube, but cannot determine WHICH of the largest number is the one to download.  Too many files are named "Untitled" and I can't find a post of .mov

  Now that my project from FCP 5 minutes video clip is over, even if I am a complete and total novice to the iMac, I nevertheless managed burned a DVD via the file > share the menu option and everything went well, but now I want to download the .mov on YouTube, but is unable to determine to WHICH many files created in this project is the one to download!  It seems that many files are named "Untitled" and I do not seem to know how to find ONE with a .mov extension.

  At the top left of my screen of the FCP is the list of "Libraries" that after that I developed all the arrows to point down looks like this:

  Libraries

  Untitled

  Smart collections

  30/06/16

  Age of television

  If you haven't guessed, the name of my project is "T.V. Age" and I expected to find somewhere on the computer, a file named, 'T.V. Age.mov' or somethjng like that for me to download on YouTube, but I can't find THE .mov files.  Maybe I don't know how to market the Finder option to display filenames WITH extensions?

  I'm hoping that someone with enough time on their hands and understanding in their hearts will take the time to help me locate the .mov that as well as help me correctly name this library Untitled in the zone without good libraries course disrupt the integrity of the completed video-music that is always open on the timeline, even if I don't there anymore since my work with her is over , but the only "CLOSE button" I see is 'close library Untitled' button on the file menu.  I don't see even its end (the *) project button!  The only way I see how close my project is to close the program, but I doubt if it's true.  Any help will be greatly appreciated.

  Tony

  If you did burn a DVD, then you did burn a DVD, you export any file can be used.  Share > main folder > Audio + video and download that ProRes file resulting.  Or use the built-in YouTube option to upload directly to YouTube.

  You don't "close" anything in the part of the timeline, it is useless.  You would simply open a new project or other media type of container, in the part of the timeline.

• When I have videos on my calendar, they do not play in the screen of the monitor. I hear the audio but can't see the image. To test if my new files are somehow the problem, I went back and used video files that I have used successfully a year ago and th

  When I have videos on my calendar, they do not play in the screen of the monitor. I hear the audio but can't see the image. To test if my new files are somehow the problem, I went back and used video files that I have used successfully a year ago, and they no longer play in the monitor window. I hear the sound track, but don't see any video. Have I changed it some setting that controls video playback in the monitor window?

  Randy Ruttger

  Thanks for the follow-up.

  Missing in this equation are the Premiere Elements version you were using and the operating system on which it is running. But...

  The Act is accomplished. But... Up to now, and after that you went ahead and moved to version 12, we now learn what Premiere Elements version you were using. We don't yet know the operating system involved.

  You said first Elements 10. First 10 Elements is affected by a problem serious display known if the computer uses an NVIDIA GeForce video/graphics card card. In this issue, the only cure is to roll back the version of the driver about may 2013. The description of the problem and how to make the rear roller are described in one of the messages at the top of this forum. What video/graphics card your computer use?

  On another front, Adobe will release a new version of Premiere Elements any day now. Not one, but Adobe knows the function defined for the new version. This type of information is announced at the time of the release of the new version.

  So the solution to the problem you presented in this thread could have been...

  1 roll back the version of the NVIDIA GeForce driver for all may 2013 if possible (Windows 8 or 8.1 64 bit, maybe not possible)

  2. move to a different version of Premiere Elements (which you did)

  I offer the foregoing for consideration so that you can review your decisions. We are pleased to learn that the first items 12/12.1 works for you.

  Please do not hesitate to ask questions and seek clarification, but do not forget that the answers are in the details.

  Best wishes

  RTA

• Need to move bookmarks FF from old computer to new computer. Where are they located on a Mac OS 10

  Need to move bookmarks FF from old computer to new computer. Where are they located on a Mac OS 10? I still have access to the old backup hard drive.

  See http://kb.mozillazine.org/Backing_up_and_restoring_bookmarks_-_Firefox

• I just created a new 'user account '. Now all my files are considered to be "hidden".

  original title: hidden files

  I just created a new 'user account '. Now all my files are considered to be "hidden". "I have thousands of .psd and jpeg files). Is it possible to change this for all files in that account without having to access each?

  I don't know what caused the problem, but you can go to control panel | Folder options | Display and enable the display of the hidden files and folders.

  Steve

• I "dragged" a folder of a drive on the DESKTOP so I could copy on a new disk. When they are copied to a new disk, the file is empty. The file is recoverable?

  I "dragged" a folder of a drive on the DESKTOP so I could copy on a new disk.  When they are copied to a new disk, the file is empty.  The file is recoverable?

  Hello

  You can try this program for recover data:

  http://www.Piriform.com/Recuva

  See you soon.

• Windows Movie Maker-uploaded photo files are blurry

  I do a short presentation on my community service I've done. It is a minute and a half, but ALL my slides come out blurry.  I don't know if I should just make them all about powerpoint, but I'm not sure if I can keep the music out there. Any advice?

  MY HUMBLE OPINION... Photo Story 3 is a better application for video
  Slide shows if you use only still shots and the music.

  PhotoStory 3 for Windows
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=92755126-A008-49B3-b3f4-6f33852af9c1
  (works on XP, Vista and Win7)

  Now... to answer your question...

  The display resolution is reduced when we look at
  the Timeline/Storyboard...this will not affect your
  completed project (especially noticeable seen)
  full screen). If you view the item by selecting it in the
  Part of collections that better, he should look like.

  If your (registered) publication WMV video files are not the
  resolution you expected... you may need to use a Custom
  Profile:

  Personally, I find the following .wmv profile to be
  useful when recording movies.
  Slide show-1024x768WMV9

  Download from the following site...

  Movie Maker - economy
  Movies - profiles custom WMV
  http://www.Papajohn.org/mm2-SavingMovies-CustomProfiles.html

  Right click / Save target as... drop in the following Vista folder:
  C:\Program Movie Maker\Shared\Profiles
  (you will need to create the profiles folder, if it is not there)
  Profiles customized for Win XP, Movie Maker will work with
  Vista Movie Maker 6.

  The last section of the following article explains how
  Publish (save) by using a custom profile.

  Windows Vista
  Create custom movie settings
  for Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/create-custom-movie-settings-for-Windows-Movie-Maker

• HELP PLEASE! I lost about 400 GB of MP4 (film and audio book) using Chkdsk files. He repaired broken sectors/files regardless, but it changed the extentions. How can I find new extensions? they are there, but I don't know how to find them.

  I have Vista Home Premium. I have a huge media collection for my ipod. I save all my video files and files on an external hard drive (my book 500 GB) audiobook while they clutter up my internal drive and so I can store them where my internal drive has failed somehow... Well I got the opposite happens. I started to get my video files would not open in their records. I ran Chkdsk utility to "fix" the files. When the program has finished running he had a Msg: something has changed the names of files and everything I was supposed to go to the files and the rear switch (as far as I can remember... I don't wear SPECIAL attention for the MSG that I thought it was normal and the program would take me to the files when it was done... ERROR. All desktop shortcuts no longer find files directly by going to my computer, then by looking at the HD I cannot find the files.  I used the program REcuva file hippo and it restores the few files that have been deleted out of the dirve and allowed to see some of the video files and audio books (but no tag info remained on the recovered files. I had to so I would like to know what they rename them). Other than these few files... less than 20 I t help either. Records that they are still there, but it asks me to open files with a program from a list of choices and not of the program draw files. (the choice to choose this high program open this type of file is also blacked out). Also when I run the cursor over the records of the size of the files do not match wat I know should be in the files. But if I just look at the my computer screen and run the cursor over the icon of the letter itself it show that there is 435 + GB hard disk info and 50 + GB of space left on it.
  A few questions:
  1. is it possible to see all the possible msg that the command chkdsk can generate so I can find that he gave me when he fixed my files?
  2 - How can I find these files if I don't know the extensions I'm looking for? they were for quicktime mp4 files, but I don't know now.
  3 - If the drive to my drive internal and try to list the backup files is located on the drive where I'd start trying to open the files?
  4 do I just need to cut my losses and reformat the hard disk, crying over 2 years, he took me to build the library and start over again >? (at least I kept some of my files from itunes library since itune on DVD about 1.5 years ago (about 300 GB of data there))
  And by the way the reader is set up to the FAT 32 format, that I did not know until this all happened.

  Go to start / Control Panel / folder Options / View and uncheck Hide extensions for known file types.  You should also check the box to see the system and hidden files while you're there.  This should show you the extensions of all files if that is the problem.  You can then rename the files for extensions are associated with a program that will open and read the files (you may need to experiment first with some programs to find one that works and an extension that works if they have been changed).  I don't know any way to do this for all files at once - they will have to be renamed individually (yes - I realize counts the number of files involved, but I know of no program in Vista or even a 3rd party program that will change the extensions for a group of files at a time - you can check for yourself on www.tucows.com and www.download.com).

  Desktop Shortcuts no longer work because either the file type of the source file has changed and the shortcut does not open the file, or because the file has been moved and the shortcut can not find the path.  You should be able to check the path by finding files (whatever they are now called) and see if they are in the same directories in path as they were before this happened.  I think it's because the source file works more correctly because of the extension (or corruption).

  Recuva to recover lost or deleted files - not the files that are on the system (and you won't not solve your problem by deleting them and then use Recuva to recover because it sounds like the problem is with the extensions and Recuva is not going to be able to correct it (it is not part of his program)).

  There's no list of ALL possible messages that might be generated by chkdsk I know.  Here is an article on the chkdsk command works in XP and some messages it generates - but far from everything and nothing look like the one you receive (and it works essentially the same under Vista): http://www.isd518.net/District/TechDir/Help/Chkdsk.htm.

  The backup on your internal hard disk drive will not solve the problem - just move it.  The 'damage' to the files are already done a backup now will not solve anything.  The fact that the drive is set up in format FAT32 is not the question (and probably not the question in the first place is) and change to NTFS now is not going to solve the problem (although you can do that after all this has been resolved).

  I won't tell you to cut your losses - this is a pretty drastic step and there may still be other options (although I don't know myself).  You can take the reader to a recovery expert data (NOT Geek Squad or one of these other major centres to store) which may be able to recover some, most, or all files.  It will be expensive and only you can decide if it's worth the cost.  These people usually the game fee and do not offer a guarantee of recovery - even if they don't recover anything you always pay.  The decision is yours.

  If none of this works, transfer your question in images and videos Forum at: http://social.answers.microsoft.com/Forums/en-US/vistapictures/threads where people who specialize in issues related to the video may be able to help with your problem, since it's video files.

  I hope this helps.

  Good luck! Lorien - a - MCSE/MCSA/network + / A +.

• The installation files are corrupted. You can buy a new copy of the program

  Whenever I try to install a new software or games and then permanently in error "the Setup files are corrupted. You can get a new copy of the program.

  Please help me...

  first scan your computer entirely with good antivirus.

• I get this message on my desktop - the Setup files are corrupted. You can get a new copy of the program.

  "The Setup files are corrupted. You can buy a new copy of the program"Hi, I get this message on my desk. I am running w/7-Ultamate with 8 GB of ram and a 650 GB hd. Any idea on how to fix this? I wake up in the morning and there are at least a dozen of the error messages.
  Thanks Jim

  Original title: the Setup files are corrupted

  Hello

   
   
  1. What is the full/exact error message?
  2. When you receive this error message?
   
   
  Follow the steps.
   
   
  Method 1
  Start the computer in safe mode and check if the problem persists, if the question does not persist then perform the clean boot and check if the problem resolves.
   
   
  Step 1
  Safe mode starts Windows with a limited set of files and drivers. Startup programs do not work in safe mode, and only the basic drivers needed to start Windows are installed. Please click the below mentioned link.
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode
   
   
  Step 2
  Put the computer in a clean boot state to see if there is a software conflict as the clean boot helps eliminate software conflicts.
  http://support.Microsoft.com/kb/929135
  Note: After you have performed the steps in the clean boot troubleshooting, follow step 7 the link to start the computer to a Normal startup mode.
   
   
  Perform the virus scan and make sure that your computer is virus-free.
  
   
  Method 2:
  Run Microsoft Online Scanner.
  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
  Important: When performing analysis on the hard drive if bad sectors are found on the hard drive when parsing tent repair this sector if all available on which data can be lost.
   
  Also, make sure that you have the latest update of the software antivirus installed on your computer, so that it works correctly.
   
  Also run a scan complete with Microsoft Security Essentials, check out the link.
  http://Windows.Microsoft.com/en-us/Windows/products/security-essentials
   

  For further assistance, post back with display of the event logs. Check out the link.

  What are the information contained in the logs of the event (Event Viewer)?

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  Response with more information to help you.

• Ntuser.dat.LOG files are important to include in a backup to transfer files to a new computer?

  Ntuser.dat.LOG files are important to include in a backup that is used to transfer files to a new computer? When you try to backup or copy files I get the message that these files (there are 4 of them) cannot be saved or copied because they have already opened and used on the computer. A single file is 256 KB and another has 0 KB. Can not see the other two

  Hi MAnnetteFox,

  Thanks for posting the query on Microsoft Community.

  You do not need to take backup of these files and they are normal files that will be generated.

  In the future, if you have problems with Windows, get back to us. We will be happy to help you.

• Relocation of existing in Dreamweaver CS3 Web site is my question. I just installed a new OS (windows7) on my PC. I reinstalled my Dreamweaver CS3 software, yet, now none of my files are in the right column for the management of my site.

  I'm trying to restore my Dreamweaver site designed in Dreamweaver CS3 after installing a new operating system (now Windows 7). I have re-installed the Dreamweaver CS3 software, so that now all my files are no longer in the right management of Dreamweaver Panel. My site as a whole is saved on a hard drive. It seems that one should be able to import GOLD, even reglisser the entire site (all files) to the existence in the right panel. My 900 + pages manual says nothing about this work. My server host (HostGator) has me download FileZilla for help, yet, so I'm not a computer person will have a difficult time to get more. Anyone have any experience with that can offer assistance? It would be most appreciated. Thank you!

  Go to Site > new Site > DW to tell it where your Site on your hard drive folder.

  Example: C:\YourSiteName.  See screenshot.

  

  In addition, you will need to reference installation log in FTP to your server.

  

  Nancy O.

• New camera.  LR. Don't let me import the photos in the new camera.   Get the following message: some import operations have not been executed.  The files are not recognized by the raw format support in Lightroom...  Application of point 4.4 of Lightroom. 

  L.R., I cannot import the photo of the new camera.   Get the following message: "some files are not recognized by the raw format support in Lightroom."  Click below to view a version update of Lightroom.   Done this and updated Lightroom 4.4.   Still cannot import - get the same message.

  Devices supported by Adobe Camera Raw

  The D610 requires LR version 5.3 or newer.

  If you don't want to upgrade, you can download the current DNG Converter and convert the NEF files to DNG before importing the DNG files.

• I recently bought a new camera from Sony a7 - ii.  the first time I tried to import raw images taken with it (with a. Suffix ARW) the program says "Preview not available for this file" and then "files are not recognized by the raw format support in Lightr

  I recently bought a new camera from Sony a7 - ii.  the first time I tried to import raw images taken with it (with a. Suffix ARW) the program says "Preview not available for this file" and then "files are not recognized by the raw format support in Lightroom" I have the most updated version, I think as 5.7.  What should I do to get these files imported as raw files?

  Hi Bobsirkus,

  The camera you have is compatible with the latest version of Lightroom, which is Lightroom 6/CC.

  Please see the list of the camera supported by Lightroom: supported by Adobe Camera Raw devices

  You can use the DNG Converter, converts images and then import them into DNG in Lightroom.

  Kind regards

  Tanuj