Movement of basic parameter values

Similar Questions

• I just got an email saying that I bought 3 movie rentals with a value of £116,15 via the iTunes store. I've done this! Someone else?

  I just got an email saying that I bought 3 movie rentals with a value of £116,15 via the iTunes store. I've done this! Someone else?

  This is a phishing attempt. Do not respond. Shall not disclose any personal or financial information. You can use the address below to the suspicious message as an attachment to the Apple. [email protected]

  The link below has information to identify fraudulent emails.

  http://support.Apple.com/kb/HT4933

• How to get the parameter values of a step type custom when I create file and adding a type of step seq

  I use lv 8.5 and teststand 4.0.

  I did a step type custom and recorded at the MyTypes.ini in pallets of type.

  I specified a default module by opening the properties of the custom step of *.ini type window, then I put some values of the parameters.

  T1) when I open teststand and I add the custom step type manaully in seq file, the labview module parameter values are represented.

  But, if to use file (create and add support prototype stage), the labview module parameter values has the default value.

  Using joint file, how to get the setting custom step type values I put in *.ini?

  Q2) each type of step are automatically by name through the use of LoadTypePaletteFilesEx. When I open teststand and I add the custom step type manaully in seq file, the module is loaded automatically. Inside the attachment, I use a prototype of charge and a fixed path where the module labview is to load the labview module.

  Can I load module automatically without using a prototype of charge or how can I get a dynamic path of type step?

  I solved Q1 for myself by using the mapping tab of the parameter within the configuration to the default module window.

  Everyone knows Q2?

  Thank you.

• vCO WebView error - parameter value is not defined in the list of the Webview attribute

  Hello

  I tried to create a simple web view for Orchestrator (5.5.1 1617127), who will present a link to launch a single workflow. I followed the instructions in the Guide of VMware and the VCO Team Blog, but both find themselves with similar errors, which seem to have a common root: it seems that the display of web pages can not read the attributes.

  On the web page, I'll see something similar to the following:

  WebView - an exception has occurred.

  Reason: WorkflowLink component error: value of the parameter "attribute" (alias "workflow") ("createVM") is not defined in the list of the Webview attribute

  You may continue by restarting the session.

  In the server.log, I see the following: -.

  11:46:04.717 2014-10-02 + 0100 [http-bio-xxx.xxx.xxx.xxx-8281-exec-2] {} [WebviewExceptionPage] Exception Webview INFO - message:

  org.apache.hivemind.ApplicationRuntimeException: component error WorkflowLink: "attribute" parameter value (alias "workflow") ("createVM") is not defined in the list of the Webview attribute

  The createVM attribute is set in the correct web view as an attribute with a Type of Workflow and value to create simple virtual machine. I get a similar error any attribute type I try to get out of the workflow (the example of getVirtualMachineList does not create an error on the page, but is not fill the window and creates a similar message appears in the log).

  Can someone give me directions on what to watch next? I can't find anyone else with this error, which makes me think it might be something specific to this medium, but I can't work on what it could be.

  Thanks in advance,

  Ben

  I had the time this by restarting the service after each new attribute has been added, which was far from perfect, but looking around the forums, I have seen that WebViews were being obsolete, so I'll have to look at alternatives in any case.

• 11g DB with the "compatible" parameter value "10.1.0.

  Hello world
  
  I have a upgrade from 9i to 11g r2 database. compatible in this database parameter has been defined as "10.1.0. for this reason, I can't use - for ex-'invisible clues' because they have at least 11.0.0 compatible parameter value.
  
  now I want to change this setting, but I'm not sure what would be done by this action, exactly.
  
  for example, Tom said: "you cannot use some new features like compression table OLTP.
  http://asktom.Oracle.com/pls/asktom/f?p=100:11:0:P11_QUESTION_ID:1203932400346694094
  
  I know invisble index is also depend on this but what else? I couldn't find a sort a list of it. y at - it all? or someone who knows?
  
  Thank you very much.

  OPTIMIZER_FEATURES_ENABLE acts as an umbrella setting to activate a series of features in a version number of Oracle-based optimizer.
  http://docs.Oracle.com/CD/E11882_01/server.112/e25513/initparams165.htm

  compatible
  http://docs.Oracle.com/CD/E11882_01/server.112/e25513/initparams034.htm
  http://docs.Oracle.com/CD/E11882_01/server.112/e25494/create005.htm#i1014800
  http://docs.Oracle.com/CD/E11882_01/server.112/e23633/changes.htm#I638061

• Default for the parameter value date

  We use Oracle bi apps 7.9.5. In that when an organization dimension that we don't pass any value of loading
  setting $$ SRC_EFF_TO_DT. It is supported as on 01/01/1753. When the default value of 01/01/1753 is set?
  
  Is there a way we can define the parameter value globally for all dimensions in Informatica or DAC?

  01/01/1753 is Informatica's default date value. It uses this value when the parameter is passed to the parameter file and no default is mentioned in Informatica. To set the default value in Informatica, you may need to change all the mappings of one by one.

  Easy by default is to set this parameter to DAC - Design-> tab settings of the Source System. This will last for all workflows walked through the DCA during execution.

  Ash

• How to pass the external APEX URL parameter values

  Hi all
  
  Hope you can help me with the following:
  
  During my first APEX application, I created a button that should have a parameter value of the current page to an external URL
  
  I created a button.
  
  The URL redirection target option is set to URL
  
  [I put the URL target for the http://[URLNAME button]? [constant parameters] & p_variable =: P13_VALUE1
  
  The APEX variable does not replace what I understand. Can someone tell me how it CAN be replaced?
  
  Thank you very much
  
  Marco

  Hi Marko,

  You must use & P13_VALUE1. of the element to get by following the link.

  Kind regards
  Andrea

• Can I use an alias for parameter such as 'The value of parameter value VI' entry in the palette of models?

  I played with the example Veristand 2015 "Set model Parameters.vi.

  Is it possible to use a parameter alias as the input string to the function 'Set parameter 2D Array Values.vi'? I tried to do this, but get the following error:

  Error 307662 has occurred to define model Parameters.vi > NI_VS ModelManager ExecutionAPI.lvlib: NI VeriStand - Set parameter 2D Array Values.vi

  Possible reasons:

  NEITHER VeriStand: The node is not found in the system.
  =========================
  NOR VeriStand: Could not find expression of parameter

  I am convinced that the alias has been implemented in the system definition correctly.

  If not, what the point of having an alias for parameter? Model workspace calibration controls don't seem to be able to use them. Am I missing something?

  Thanks in advance for any help on this matter.

  The alias parameter access is just for reading.

  To write to the parameter, you ned to use control of Calibration of model or the model parameters Manager API. Alias as the parameter cannot be used to write.

• Problems using the event to write new parameter values to VISA structure

  Hi all

  I created a VI to read an Omega flow meter. It is possible to change setpoint (setpoint (0-2) SLPM) of the meter and the gas (O2, CH4,...). To read instrument I write its ID (A-Z), followed by a carriage return, for example: A + 0x0D

  I created a VI with the events to write only the parameters to the instrument when a value is changed. My VI works but from time to time, it does not write the parameter change (gas or set point). I think that is has something to do with the while loop containing an entry VISA.

  Open FMA contains parameters and VISA opend

  Case of timeout initialize writing gas and setpoint for the first time

  Other events are for the change in the value of setpoint and gas

  How can I make sure that any change of setting will be writtent the instrument?

  Thank you

  Salvation Bass,

  Well, it is true that I lose this way time-out feature.

  No, you do not lose this feature. You put in a different position.

  You must call it BEFORE your loop!

  I'm not sure that I am following on this one there

  Why are you not sure? You have a large number of constants "0d" and it would be great to see that they are displayed in HEX mode instead of the normal display mode.

  The new VI manages events sometimes... but sometimes, missing a few changes... I think it is because there is an entry in the while loop. Do you have any idea how to prevent this?

  Never, NEVER use parallel loops to write and read on the same device on your serial port!

  How do ensure you that you always get the right answer to your order sent before?

  What is the purpose of using a second loop here? A loop with no wait States?

• Pass parameter value between c# and TestStand

  Hello

  I'm currently futured, customize the User Interface complete

  I Test.seq master who has all the tests and I need to run only the selected test user in the user interface.

  so I thought to transmit the selected user code c# UserInterface test form to master Test.seq.

  How can I pass the value of the parameter or is there another way I can share data between USerINterce and seq file?

  Thanks in advance

  IVI

  
  

• How to switch to TestStand a parameter value of LabVIEW in the Menu drop-down?

  I'm using LabVIEW with TestStand. Sometimes when I pass a parameter to a LabVIEW module and it's a ring Enum happening as a pretty drop-down menu where I can choose the required value, but sometimes the menu does not appear. How can ensure to pass the values of the ring always menu? I have attached a few photos to show the menu in TS.

  I appreciate your help.

  Thank you.

  H.P.

  Your order must be an enum. Your text ring is no different than a normal digital control. In your case, you cannot just replace the text with an enum ring because an enum requires unique values, and you have several selections with 'Reserved' in the form of text.

• How to use parameter values in a run profile

  I run a Disqualification work in CLI using a shell script with additional parameters, such as phase.*.processor. D * .parameter_name1 = abc

  This has been very useful in using the same value on all processors.

  However, I have a different use case where I need to use the same value within a run profile mainly to reduce to a minimum the records being read by the reader.

  How can I make use of the dynamic value in the run profile? something like:

  parameter_value1 = abc

  phase.*. Snapshot.Table1.sql_predicate = {parameter_value1}

  Yes you cannot really define a parameter and have it used in several specific substitutions. But you can probably use wildcards in the substitution syntax so that you must specify a simple substitution in the first place.

• Get the workflow parameter value before the end of the SOAP client workflow execution

  I'm calling webservices SOAP Orchestrator of my request to run a workflow. I want to get a parameter/attribute value before execution of the workflow.

  Brief:

  I have a XYZ workflow that adds two numbers provided by my application. After that my workflow perform some other features that say 5 minutes.

  My application is the result of the addition from the addition is performed. I don't want to wait for these 5 minutes to finish after what my worlkflow is finished and then obtain the result.

  Hello DeepakPN - first of all, if you use vCO 5.x, we strongly recommend to use the api instead of the old api SOAP REST.

  Now, to answer your question:

  When you run a workflow, the returned soap body includes a return workflow id: this is your workflow token id - essentially the Runspace of your workflow. He looks a bit like this:

  
     
        
           
              ff80808141e74b090141f05c5d2c00f7
  

  There are several additional lines less than retail, but I left it as an important component of the info here is this tag . The value that it contained should be used with the operation "getWorkflowTokenForId". By providing this ID and your credentials, the resulting SOAP body will contain details of your performance at the time of your request. So, if you have your amount stored as an attribute at the time that you run the query, you will see the results. For my simple test, here is my operation "getWorkflowTokenForId" for a test flow that I came through SOAP:

  
     
        
           
              ff80808141e74b090141f05c5d2c00f7
              
              1a568e2e-5c15-4b68-9bab-20cb955f0004
              item0
              completed
              completed
              
              20131025120447-0400
              20131025120447-0400
              
  
  
  >
  >
  
  
  
  ]]>
           
        
     
  
  

  Inside the tag, there is a tag that contains each of my entries/attributes. In the code above, 'anyInput' is the input parameter for my workflow and of the "inputTypeName" as an attribute.

  Hope this helps

• Report in RTF parameter value

  Hi all
  I have a XML report with 3 setting, I need to capture the value of these parameters in my RTF and inspiring that I have to do a validation.
  
  So how to get the value of the parameter in RTF.
  
  Please help me on this.
  
  Thank you

  If you set as param1

  then in rtf model you can display using this tag

  If you want to use for validation, you can use as do

  like that you can use... <$param2?> ...

• Mapping of substitution of parameter values

  I have 2 allegedly identical environments using the DAC v 10.1.3.4.1 and Informatica 9, in an environment all right, in the other, that a number of mappings of vanilla fails because the parameters are null. In the environment that does not work the session logs shows this:
  
  Gravity node Thread Message Code Message Timestamp
  INFO 06/11/2012 20:12:59 node01_udapbia1 DIRECTOR VAR_27027 by default parameter mapping: [MPLT_ADI_CODES. $$ CATEGORY].
  
  In the environment that does not have his watch this:
  
  Gravity node Thread Message Code Message Timestamp
  INFO 06/10/2012 20:15:27 node01_utapbia1 DIRECTOR VAR_27028 use override the value ["ABSENCE_TYPE"] parameter mapping: [MPLT_ADI_CODES. $$ CATEGORY].
  
  
  Clearly the second works because the value ABSENCE_TYPE has been replaced, but why is he not in the first, it's a vanilla - SDE_ORA_CodeDimension_Absence_Type mapping, it has not been changed.
  The two environments are identical, paths to the same parameter files.
  
  The same problem occurs for most of the other CodeDimension of the mappings.
  
  Thank you very much
  Ed
  Can someone tell me where they replace the values are stored and why they are used in an environment, but not the other, please?

  Can check this proparty is set to Integration Services using AdminConsole
  overwriteMpltVarWithMapVar = Yes

  If it is useful, please mark as correct or useful