Moving average of all kinds

I'm doing something similar to an average commute, but I want it on average to each 10 data instead of keep moving points. I don't know exactly what it is, part of the reason why I'm a bit confused on what to do. I've seen several functions of moving averages, but still, this isn't what is needed. I have a very large data collection and wanted to get to a whole easier to manage data. The data comes in the form of one and zeroes. No indication in this regard would be appreciated.

Hello

You can see thispost on the forum that addresses similar requirement you have.

Concerning

Tags: NI Products

Similar Questions

  • FPGA - windowed moving average, variance, standard deviation, kurtosis and asymmetry

    Hello!

    I'm processing in FPGA and I want to calculate the MOVING WINDOW average, variance, standard deviation, kurtosis, asymmetry online for the last N (N is the size of windows) elements. The frequency is about 100 kHz and N about 10000 (100 ms of signal).

    I found something like EMA (moving average exponential)...

    Have someone solved something like that? Any ideas how to fix?

    That looks like a problem. What type of window you need? The moving average exponential isn't an option? There are online algorithms described in Wikipedia, but they can suffer from problems of numerical accuracy when it is implemented in a fixed point (depending on the nature of the data). They would be interesting watch in, however.

    Other than that, here are some options that I can think of:

    • More large FPGA
    • Be part of the treatment on the RT controller - have - you looked into that?
    • Return to your needs and push some of the numbers. Do you really need 100 ms in all cases, etc.?
    • Depending on the nature of the data, simple compression techniques may be an option
    • An precision analysis to determine the data type minimum, that you really need. For example, getting to 25 bits, would have a huge impact on your cost of multiplier.
    • Consider the mathematics of floating (using Xilinx IP cores) point to online methods. Your flow is relatively low, so you could share it resources between all channels. Manage States of different channels is complicated but is doable.

    The BRAM will be used for FIFO buffers, but is also available for general use to implement the fifo and memories. Some IP use BRAM under the hood, keep an eye on the compilation summaries to monitor how much still you have.

  • Moving average and keep indexing

    Hi all

    Many members share so nice VI for the execution of moving average. But if the measure deliver (NaN) it will be a problem in this case, specifically. When

    the processing of the data is in real time mode. So please can help me to handle this.

    Here I try to do, its works well, but when I insert it to the acquisition in time real and treatment he puts a lot of problems.

    Thank you.

    some methods more...

    What are you going to measure? Just curious

  • exponential response moving average stage fpga

    Hey guys,.

    I have a problem with my filter, the exponential weighted moving average filter (IIR 1 st order.). Excerpt from the book: understand the digital signal processing (Richard Lyons) I have the following formula, calculate the frequency of 3dB (CF) of alpha. Alpha is the parameter to control the filter.

    Differential equation of the filter: y [n] = x [n] * alpha + (1 - alpha) * y [n-1]

    Relationship between CF and alpha: alpha = cos(2fc/fs) - 1 + sqrt [cos²(2fc/fs) - 4 * cos(2fc/fs) + 3]

    If I now choose a frequency of 3 dB from 0, 0794Hz (time constant (TC) = 2 s) alpha = 0,00169621. (fs = 94)

    For a filter command 1st IIR, the rise time (your) of the stepresponse (from 10% to 90%) is: ta = 2, 2 * TC which translates your = 4, 4S.

    But if I simulate the step response, my rise time is about 3 times this value at 14.

    I can't explain why the response of my filter is so much different. For my Moving Average filter, the calculated and simulated rise time are equal.

    I have the vi that is performed on the attached FPGA. Maybe someone can find a mistake...

    Greetz

    Slev1n

    Hey ZX81.

    Thank you very much for your detailed answer.

    Regarding the issue with the rise time, I think I've found the error. You might be right, that the formula is not correct, or which is most probably misunderstood by me and put in the wrong context.

    When I was cycling home from work I remembered a practical function of labview: 'coefficients.vi filter smoothing' here you only need to define tau/TC and fs and it calculates the numerator and the denominator for the moving average exponential and the moving average. Offering it is alpha I could compare the result of the formula I've used and there was a big difference. LabVIEW uses the following formula: alpha = 1 - exp (-1 /(fs*TC)). With this formula, TC = 2 s is equal to alpha = 0, 0053.

    And with this alpha my simulation works! Risetime 4.4 s

    Quote you: "in general, at this stage, I have maturities adjust alpha until my results matching what I wanted and move." I would like to do the same thing, but as it's my thesis I have to solve such things

    Now, back to the rounded questions. I understand that the small values are a more serious problem. This filter is used in a Lock In, the values are going to be REALLY small. But I've already tested on our measuring device and it works, to that effect, I'll test your version as well, but if I get no problems, I guess I keep to the 40bits. Simulating the following configuration, caused an error of 2.3%. 57 bits using reduced the error less than 1%. I think that 40bits should be sufficient.

    Alpha = 0, 000335693 entry = 1, 19209E-7

    And regarding resources, I have no worries. Although using a myrio ultimately I still have a lot of DSP Slices for the multiplication and 10% in flip flops.

    So I guess that this matter is resolved. Thanks for your great help and interesting reflections.

    Kind regards

    Slev1n

  • Moving average calculation

    Hi all

    I am trying to achieve a moving average Calc very simple. Even if my calc is valid, I get an error message after I run my script to calc:
    ' scalar double argument expected in function [@__SHIFT].

    Here's my calc script:
    "Measure_1" = (@SUMRANGE ("Measure_2", @CURRMBR ("Period")) +) ".
    @SUMRANGE ("Measure_2", @NEXT (@LIST (@CURRMBR ("Period"), "Jan":"Nov"))) / 2;)))


    Here is the obligation to calculate the Measure_2:
    Jan Feb Mar Apr
    Measure_1 10 20 40 100
    Measure_2 15 30 70


    Under calc worked, but then I really don't want to repeat the same logic 12 times:
    Measure_2-> "Jan" = (Measure_1-> "Jan" + Measure_1-> "February") / 2;

    Any ideas?

    Thank you!

    Mehmet

    you would be better to use the currmbrrange function. Here is a generic example of the tech reference
    @SUMRANGE ('Measure1', @CURRMBRRANGE(Year, LEV, 0,, 0))

    Note there is also an avgrange instead of the sumrange function in order to get the average over time. There is an additional setting in jump missing and zero members.

  • [8i] how to calculate a moving average?

    I am trying to calculate a moving average over a specific period of time, but I can't quite figure out how to do this. For this particular problem, I am also stuck on a 8i database.

    Some examples of data for the problem:
    CREATE TABLE     my_data
(     order_no     CHAR(10)
,     seq_nbr          CHAR(4)
,     area_id          CHAR(4)
,     start_date     DATE
,     unit_time     NUMBER(7,2)
);

INSERT INTO my_data VALUES ('0000567890','0010','A001',TO_DATE('05/01/2000','mm/dd/yyyy'),0.34);
INSERT INTO my_data VALUES ('0000567890','0020','A001',TO_DATE('05/02/2000','mm/dd/yyyy'),0.78);
INSERT INTO my_data VALUES ('0000567890','0030','A002',TO_DATE('05/03/2000','mm/dd/yyyy'),0.91);
INSERT INTO my_data VALUES ('0000567890','0040','A003',TO_DATE('05/03/2000','mm/dd/yyyy'),0.27);
INSERT INTO my_data VALUES ('0000123456','0010','A001',TO_DATE('04/01/2001','mm/dd/yyyy'),0.39);
INSERT INTO my_data VALUES ('0000123456','0020','A001',TO_DATE('04/02/2001','mm/dd/yyyy'),0.98);
INSERT INTO my_data VALUES ('0000123456','0030','A002',TO_DATE('04/03/2001','mm/dd/yyyy'),0.77);
INSERT INTO my_data VALUES ('0000123456','0040','A003',TO_DATE('04/03/2001','mm/dd/yyyy'),0.28);
INSERT INTO my_data VALUES ('0000123123','0010','A001',TO_DATE('12/01/2001','mm/dd/yyyy'),0.31);
INSERT INTO my_data VALUES ('0000123123','0020','A001',TO_DATE('12/02/2001','mm/dd/yyyy'),0.86);
INSERT INTO my_data VALUES ('0000123123','0030','A002',TO_DATE('12/03/2001','mm/dd/yyyy'),0.82);
INSERT INTO my_data VALUES ('0000123123','0040','A003',TO_DATE('12/03/2001','mm/dd/yyyy'),0.23);
INSERT INTO my_data VALUES ('0000111111','0010','A001',TO_DATE('06/01/2002','mm/dd/yyyy'),0.29);
INSERT INTO my_data VALUES ('0000111111','0020','A001',TO_DATE('06/02/2002','mm/dd/yyyy'),0.84);
INSERT INTO my_data VALUES ('0000111111','0030','A002',TO_DATE('06/03/2002','mm/dd/yyyy'),0.78);
INSERT INTO my_data VALUES ('0000111111','0040','A003',TO_DATE('06/03/2002','mm/dd/yyyy'),0.26);
INSERT INTO my_data VALUES ('0000654321','0010','A001',TO_DATE('05/01/2003','mm/dd/yyyy'),0.28);
INSERT INTO my_data VALUES ('0000654321','0020','A001',TO_DATE('05/02/2003','mm/dd/yyyy'),0.88);
INSERT INTO my_data VALUES ('0000654321','0030','A002',TO_DATE('05/03/2003','mm/dd/yyyy'),0.75);
INSERT INTO my_data VALUES ('0000654321','0040','A003',TO_DATE('05/03/2003','mm/dd/yyyy'),0.25);
    It is a sample of the actual data, which includes the lines around 50K, and is the result of a query, not a table. In addition, the actual data also have a reference number attached to each order, and the end result will be be partitioned by party id number and the region. This sample represents basically something, you might see a unique part number. In addition, these records at the time spacing is not predictable. You might have a single year that has 20 ordered, and another year (or years) that does not.

    Here is where I am now in the problem. For example, suppose I want to calculate a moving average over 2 years (average for the 2 years preceding the date of the current row). For my actual data, I probably want to be able to change the period of time (at different times in several queries) on which the moving average is calculated.

    I thought that using the analytical function AVERAGE with a window clause might be the way to go, but I don't know exactly how to use the window clause. I can even be completely wrong interpret what is its use, but if all goes well, it should still show what I'm after.
    SELECT     area_id
,     AVG(tot_area_unit_hrs)     
     OVER     (
          PARTITION BY     area_id
          ORDER BY     min_start
          ROWS          BETWEEN     --2 years prior to min_start of current row
                    AND     CURRENT ROW
          )
,     --something to indicate the time period the average is over     AS time_period
FROM     (
     SELECT     order_no
     ,     area_id
     ,     MIN(start_date)     AS min_start
     ,     SUM(unit_time)     AS tot_area_unit_hrs
     FROM     my_data
     GROUP BY     order_no
     ,          area_id
     )
ORDER BY     area_id
,          time_period
    As you can see from the above query, I want to calculate the sum of the unit_time for each order/area_id combo, then roll the way to this total time. (I'm the average total time that a product passes through each area_id per order).

    I want to see results like something along those lines... I really don't like how the time period is identified, as long as I can pay by him in chronological order, and he tells me what period of time it covers. The way I show with period_start and period_end in the results of the sample below is just a way that I thought to do this.
    area_id   period_start period_end   avg_unit_time   
----------------------------------------------------
A001      4/30/1998    5/1/2000     1.120           
A001      3/31/1999    4/1/2001     1.245           
A001      11/30/1999   12/1/2001    1.220           
A001      5/31/2000    6/1/2002     1.223           
A001      4/30/2001    5/1/2003     1.153           
A002      5/2/1998     5/3/2000     0.910            
A002      4/2/1999     4/3/2001     0.840            
A002      12/2/1999    12/3/2001    0.833            
A002      6/2/2000     6/3/2002     0.790            
A002      5/2/2001     5/3/2003     0.783            
A003      5/2/1998     5/3/2000     0.270            
A003      4/2/1999     4/3/2001     0.275            
A003      12/2/1999    12/3/2001    0.260            
A003      6/2/2000     6/3/2002     0.257            
A003      5/2/2001     5/3/2003     0.247           
    Any suggestions?

    Hello

    You're close enough. You want a window based on the BEACH, no LINES.
    LINES BETWEEN... means that you know exactly how many lines will be in the window, and you don't care what range of values that represents.
    RANGE BETWEEN... means that you know the exact scope of the ORDER BY value to include in the window, which could mean any number of lines.

    When you say "RANGE BETWEEN x BEFORE...". "where the words ORDER BY id of a DATE, x is considered as the number of days. (Which is consistent with the arithmetic DATE Oracle).

    Try this:

    SELECT     area_id
,     min_start - 730          AS period_start
,     min_start             AS period_end
,     AVG(tot_area_unit_hrs)
     OVER     (
          PARTITION BY     area_id
          ORDER BY     min_start
          RANGE BETWEEN     365 * 2     PRECEDING
                AND     CURRENT ROW
          )               AS avg_unit_time
FROM     (
     SELECT     order_no
     ,     area_id
     ,     MIN(start_date)     AS min_start
     ,     SUM(unit_time)     AS tot_area_unit_hrs
     FROM     my_data
     GROUP BY     order_no
     ,          area_id
     )
ORDER BY     area_id
,          period_end
;

    Output of your sample data:

    AREA PERIOD_STA PERIOD_END AVG_UNIT_TIME
---- ---------- ---------- -------------
A001 5/2/1998   5/1/2000           1.120
A001 4/2/1999   4/1/2001           1.245
A001 12/2/1999  12/1/2001          1.220
A001 6/1/2000   6/1/2002           1.223
A001 5/1/2001   5/1/2003           1.153
A002 5/4/1998   5/3/2000            .910
A002 4/4/1999   4/3/2001            .840
A002 12/4/1999  12/3/2001           .833
A002 6/3/2000   6/3/2002            .790
A002 5/3/2001   5/3/2003            .783
A003 5/4/1998   5/3/2000            .270
A003 4/4/1999   4/3/2001            .275
A003 12/4/1999  12/3/2001           .260
A003 6/3/2000   6/3/2002            .257
A003 5/3/2001   5/3/2003            .247

    The period_starts are not quite what you posted, but, if I understand you correctly, you don't mind that.
    There should be no problem of partitioning an additional column.

  • 12 month moving average HFR

    HFR 9.3.1
    I have a month (defined as the time) dimension and a years. Basically:

    Measures
    -Net margin
    -Revenue
    -Cost
    Month
    -Jan
    -Etc.
    -Dec
    Years
    -EF07
    -AFA 08
    -EXERCISE 09

    I am trying to build a State that displays the selected month and moving average 12 months, but have a problem of displacement of the year at the correct place.

    BASICE installation would be
    A--FY08---FY08---FY08---FY08---FY09---FY09---FY09---FY09---FY09---FY09---currentYear(or user selection) column header
    B---Sep---Oct---Nov---Dec---Jan---Feb---Mar---Apr---May---Jun---CurrentMonth(or user selction) column header
    Tier 1-recipes
    Cost of line 2

    I can get 12 months of lag, np, but how to make the second dimension (year) to change when it is Dec?

    J

    create 2 columns (col A and column B)

    Col A:
    Year: POV sometime this year
    Time: Jan of POV for time

    Col B:
    Year: Member Relative [POV current year - 1]
    Time: Member [current time + 1 POV] Relative to dec

    Example:
    If you select 2009 and Mar
    ColA: Year: 2009 / time: January to March
    ColB: Year: 2008 / duration: April to December

    I think that's what you want.

    Kind regards
    Rahul

  • I'm having a lot of problems with firefox and cannot figure out how to get help. It all started when I updated to 13. I get all kinds of advertising popups, I can't play a

    I'm having a lot of problems with firefox and cannot figure out how to get help. It all started when I updated to 13. I get all kinds of advertising popups, I can't play a game on FaceBook called Farm Town at all, and I get a popup of AVG on the cookies that I can't get rid of. These issues are causing me to use Chrome quite often, although I like Fox better. I've searched and searched how to get help and find nothing. How can I get personalized technical help? These problems will not occur in Chrome at all. Thank you.

    Do a check with some malware malware, analysis of programs on the Windows computer.

    You need to scan with all programs, because each program detects a different malicious program.

    Make sure that you update each program to get the latest version of their databases before scanning.

    Alternatively, you can write a check for an infection rootkit TDSSKiller.

    See also:

  • Average of all values between (above first and last above) a threshold value.

    Currently I have a VI where I programmed a year or more ago, takes any value of a set of data that exceeds a certain threshold. It is used to capture the average of all values above a threshold when there is a peak of the values that exceed this threshold. However, when there are two or more peaks that exceed this threshold, only values greater than this value are averaged, so the final result is the average of the two or more.

    What I need is for each value that occurs after the threshold is reached, and before that the threshold fell below for the last time. Imagine a set of data whose graph looks like the letter "M" for example with the threshold being to halfway to the top of the M, I want to show the average (the first bump, the fall below the bumps, as well as the last bump) but what I'm saying now is the average of (the first bump, over the last bump). What I get now cut the data between the two summits.

    Any help would be appreciated of course.

    Here's a method, perhaps not the best.

  • Creation of period moving average trend line 50

    HI, im trying to set my curve in LabView and trying to create a 50 period moving average treadline as in excel.

    is it possible for me to do in LabView?

    I tried general polynomial Fit VI and a few other screw in unions, but failed to get anything close to the way I want

    any ideas? anyone?

    Charlie, there is a better VI called means"PtByPt". Look in the palette "Signal Processing > point-to-point > Prob and Stat > means. Add an advantage: this VI gives data valid for the first 50 points, although the average is not "development" or "stabilized" during early iterations. (Also, don't forget that primitives "delete table ' and 'Building the table' call memory, meaning Manager memory copies of great paintings and fast loop rates will result in a bottleneck of the CPU.) Using circular buffers is one way to alleviate this limitation.)

    64864050, try to adapt this code to meet your needs:

  • moving averages

    I have a file (excel) which has 11,12,13,14,15,16,17,18,19, 20, 21, 22, 23, 24, 25, or no matter what random numbers in no particular order.

    I have a bearing everytime calculation that reads the file. for example.

    Add the first 5 digits in the file and divide by 5, then place the first number and move one to the right and get the number following 5 and then divide it by 5, etc.

    (11 + 12 + 13 + 14 + 15) / 5 = 13, the first time, he reads then file the first number and move one to the right (12 + 13 + 14 + 15 + 16) / 5 = 14 then (13 + 14 + 15 + 16 + 17) / 5 = 15.

    Can anyone help please?

    There are many examples of functioning / moving averages on this forum. But I don't remember them ever called rolling average. So you might want to search for running or moving average.

    A recent thread started by comes me to mind.

    The simplest example I saw while loop with shift registers, especially if you do not need to change the size of the sample running.

  • Moving average filter

    Hello. I want to do a mobile medium filter for my VI. I did a basic FIR filter... but I have not a clue how to make a filter means mobile.
    + I want a button to play the input wav file... How can I do this?

    This is the vi:

    My tip for a moving average is to use the FIR filter with specific coefficients.

    Regarding your wav file playback, discover the graphics and the sound palette.  I have little experience with them, but I know that there is a screw there to read your wav file.

  • wordpad emails show all kinds of characters instead of words

    I have problems with my emails of people who use a wordpad. Emails imagined all kinds of jibberish, no words, just a bunch of characters.

    I realized that by activating the format bar in the view of the wordpad document part it works now. Thanks for the help, he headed in the right direction.

  • My account has been blocked because someone compromising my account by sending all kinds of spam/spam or enter the incorrect password, put false data.

    My account has been blocked due to someone compromising my account by sending all kinds of spam/junk mail. I don't use the account a lot and it's been long that I was there. When you cannot remember the subjects of the emails you sent because of the delay and can identify the files that you put in place and they will always say that you can't be identified because "we are unable to validate your identity.

    I don't use a lot of electronic mail, but I stored critical data in folders that I need for SEO work and home, as well as historical data I have not otherwise recorded on a disk or in hard copy. (lesson learned the hard way with backup)

    When I try to do a reset, claim, that I did not provide enough data to confirm my ID is there a direct way or the person who can be contacted for help with this?

    As a senior, my computer skills are not strong and I never thoufgt anything like this in advance. So I need to know more abou this reconstruction process which can help me to get into the escrow account.

    Hi bennienobles,

    If you are referring to a Hotmail account, your quetsion would be better suited in the Center of Windows Live Help solutions. Please visit this link to find a community that will provide the support you want.

    Thank you!

  • I ran a quick check on my office and found all kinds of strange things, including my name seems to be in Chinese (?)

    Original title: unknown

    I have for some time had Windows Live Essentials 2011 on my desktop. I couldn't for a while get on Messenger or mail and believe that the two have been compromised by a hacker (?). Whenever I try to communicate with a friend on the list it will immediately power off. If I try to open messenger of the taskbar, the same thing happens. I ran a quick check on my office and found all kinds of strange things, including my name seems to be in Chinese (?) Can someone tell me please how to get rid of this mess, so that I can use messenger again? I found an address of sorts, something that I mentioned, it is not encrypted. Please help me out here if you can. Thank you very much.

    Hello

    I suggest you to report any problems with windows live product in windows live support team.
    http://windowslivehelp.com/

    You can try the steps below to restore the default windows display language.

    Step 1: Select to see the only fonts TrueType in the programs on my computer option.

    Reference:
    To display only TrueType fonts
    http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/windows_fonts_truetype.mspx?mfr=true

    Step 2: Change the theme and check.

    Here's how:
    1. right click on an empty space on the desktop and then click Properties.
    2. on the themes tab, select a different theme.

Maybe you are looking for