moving from XP to Windows 8.1, can not get Acrobat 9 to work, need help. solution?

Similar Questions

• I have windows 8 and can not get my gigabit cam to load - help please!

  All cameras operate on all windows PCs - I use windows vista, but have now windows8. My cam-pcl-pc110 gigabit is not responsible or

  recognized by my pc. Does anyone can help that I'm not very versed on the pc! Do I have to buy a new cam?

  [Moved from comments]

  All cameras operate on all windows PCs - I use windows vista, but have now windows8. My cam-pcl-pc110 gigabit is not responsible or

  recognized by my pc. Does anyone can help that I'm not very versed on the pc! Do I have to buy a new cam?

  [Moved from comments]

  "All the cameras operate on all windows pc?
   
  Lol all the hardware and software support come from the manufacturer of software and hardware (of the product in question.)  If the hardware manufacturer (Gigabit you said?) supports this model camera (cam-pcl-pc110) under Windows 8 - they will provide drivers, you can get through them and install.  If they are not - you may be looking to get a new camera.
   
  Another series of questions...
   
  Windows 8 Pro?  With the Media Center pack?

• After restarting my computer Windows Vista, I can not get the wireless to work.

  Re start my Vista and now l can't get broadband wireless, but before he started he was work ing great. Can anyone help please, or can I use my windows 7 on my laptop by paying a fee

  Paul

  original title: Vista, broadband

  The computer is a Toshiba Satellite model PSLB8E-0CK00YEN

  l cleaned my vista with my drive, everything works, but the broadband wireless

  Which means that Vista has erased my discs, how l can get the disks on my lap top?

  Actually - if you have installed Windows Vista from scratch yourself (booted from the Windows Vista support and followed along to do a clean install or use some CD/DVD by default) then you're the one who has erased your disks and all data about them.  In any case - your "wifi" does not indicate any wiping.  * smile *.

  If it's just a simple Windows Vista DVD, then * you * need to get all the drivers for hardware on this computer.  You may need to use a different machine (of course) in order to get the proper and then drivers transfer to them for the Toshiba by USB/CD/DVD.

  Is this REALLY a Toshiba Satellite L300-20 d?  (Click on this link to check...)
  The * number * of part is PSLB8E-0CK00YEN.

  You should be able to get the drivers you need here:
  http://UK.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp?service=UK

  Laptops
  Satellite
  Satellite L series
  Satellite L300
  PSLB8E
  Windows Vista 32 bit
  ----- All -----
     
     

  (Click on research)

  Page 3 of pilots - one of the two wireless Lan drivers.  I have no way of knowing that.

• Can not get the Messenger at work need wldlog.dll

  I can't the functioning of messenger. tell me that I always wldlog.dll... anybody born have all the answers. I did everything...

  Hello

  Please repost in windows Messenger forums in the link below

  http://www.windowslivehelp.com/product.aspx?ProductID=2

• HP Photosmart series 7520 I can not get my fax to work at all

  I can not get my fax to work.  He always tells me that my phone connection may not be configured correctly.  I place the phone cord Jack #1 at the back of the printer and also connected the phone cord to the wall outlet.  I don't know what else to do.  But I'm losing too much time trying to get this working.

  I appreciate your advice and help. However, after checking, I found that the wall outlet is not working. Plugged into another connection and it worked fine.

  Thank you very much for your help.

• Bought Lightroom CC for 2 devices.  One installed fine but can not get the LIBRARY to work on the 2nd unit.  2nd camera, it is the menu bar, but nothing other than a gray screen, 1 device has all the tools.  If anyone can help.

  Bought Lightroom CC for 2 devices.  One installed fine but can not get the LIBRARY to work on the 2nd unit.  2nd camera, it is the menu bar, but nothing other than a gray screen, 1 device has all the tools.  If anyone can help.

  Thanks Tanuj,

  After reloading the software it seems to work now.

• After a clean install of Windows 8, I can't get three monitors to work

  I did a clean install of Windows 8 pro.  I have a Dell T1500 with over-pants V4800 graphics.  This machine previously had Windows 7 installed and works with the ATI driver.  With Windows 7, the three monitors worked without problem.  Now, with Windows 8 installed I can't get two monitors to work.  I use the more updated driver for Windows 8 for the map on the website of AMD.  The third monitor can be seen on the page of the screen resolution, but I cannot "extend desktop...". "the third arch.  When I try to do so it gives me a message saying

  "The display settings could not be saved.  Please try another combination of display settings. »

  All three monitors are the same, Dell P2210.  I tried different resolutions. I tried the driver I was using on Windows 7, I uninstalled the driver and adapter repeatedly.  I installed all the drivers from AMD with the extras (hydravision, etc.).  I used just the default Windows drivers. I have change the placement of the monitors on the video card, but few matter where I plug them in, only two works.  All monitors are operational.  I even tried different monitors.  All this with no result.  I tried to use the Catalyst Control Center.  He sees the third monitor but just shows it as being disabled with no way to enable that I see from in the Catalyst Control Center.

  It is the last obstacle for me to fully use this machine to Windows 8.  I'm puzzled.  I have read many other forums.  I've heard of this problem with Windows 7 as well so I don't know that it's specific to 8 but could very well be.  Yet once I had Windows 7 with three monitors with the same card.  Contribution to this issue would be greatly appreciated.

  I had this problem on a Lenovo three installation of the monitor using the integrated display laptop, a monitor outside the mini HDMI and a third follow out of the HDMI Port among Replicator.

  In the end, it's a simple solution.  When you go to display settings, all three monitors not reimbursed up to 1920 x 1080 and configuration could never be saved - however the 3rd monitor only supported by 1680 x 1050, which is the resolution (recommended).  After changing the 3rd monitor for the resolution recommended, I was able to save the configuration to display > screen without problem resolution.

  I don't know why the resolution not supported has been set default to-after selecting the right pair, there is now no option to go to the highest resolution not supported on this screen.

• I'm moving from Vista to windows 7 via download. Get the message unable to write to the boot sector.

  I downloaded Windows 7 to my system. I'm currently running Vista and want to upgrade.  When I try to start the upgrade process it errors out and says he can't wite the boot sector.

  Help.

  Hello

  ·          Where exactly did you download Windows 7?

  You can follow the steps in the article and see if it helps.
  Upgrade Windows Vista to Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-Vista-to-Windows-7

• HP 2000 369WM reinstalled windows 7 and can't get the wireless to work

  My laptop is the 369WM of 2000 hp and I had problems, so I reinstalled windows 7. Come to find out that I can't get the drivers from the hp support site to work. My network controller IDS are

  PCI\VEN_1814 & DEV_5390 & SUBSYS_1636103C & REV_00
  PCI\VEN_1814 & DEV_5390 & SUBSYS_1636103C
  PCI\VEN_1814 & DEV_5390 & CC_028000
  PCI\VEN_1814 & DEV_5390 & CC_0280

  So I was wondering if somebody could helpme out. I can not turn on button F-12 (wifi) or still does not reach my home wifi without using my wireless desktop usb thing (which is temporary), I saw a few posts of the forum on the ID and having a card or something, but I didn't know what to do.

  Thanks in advance, Austin

  Hi, Austin:

  Here is the link to the latest version of the driver for the card your laptop Wireless:

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5229455&prodNameId=5229457&swEnvOID=4059&swLang=13&mode=2&taskId=135&swItem=ob-116957-1

• Just reinstalled Windows 7 SP1 to allow the update of Windows 10 but can not get Windows update to apply the updates.

  Brand new Windows 7 SP1 installation on a new disc wont format download updates from windows update, just stay to "check updates". Tried troubleshooting for windows update but starts ok, but never complete too.

  I tried troubleshooting Microsoft online diagnosis that difficulty various problems but windows update has not changed

  All clients by default update can not handle KB3168965 (released four days ago), most a few others. Download and install KB3161647 included in KB3161608.

  https://support.Microsoft.com/en-us/KB/3161608

  KB3161608 requires KB3020369 installed.

  https://support.Microsoft.com/en-us/KB/3020369

  Manual installation of updates requires research to be interrupted. The value of the automatic updates to "never check updates" and then restart Windows.

  Best regards, VZ

• I recently installed windows 7 but can not get the hp Director to install?

  I have an all-in-one psc 1350, I recently installed windows 7 and now cannot get hp Director to install, all other aspects of my printer work apart from this can someone help I need this function to check my ink levels thanks

  Hello irene26,

  Awhile back HP Director was replaced by a new (although very similar) program called HP Solutions Center. You can find information about it here, with steps in order to get installed it on Windows 7

  Windows: How do I get the HP solutions Center

• Can not get the printer to work under Windows

  I have a Brother Laser printer and a Canon ip8500 printer.  I tried to get one to run Windows XP Professional.  This week I installed the Hello printer software and it finds my printers but then I get this message "sharing is not supported for this type of printer.  When I click on settings in VMware, disabled the said printer icon.  If I close Windows and click on settings in VMware, the icon of the printer is enabled.  I'd appreciate it if someone could help me get one of my printers to work.  I must do something wrong and just can not understand.  I use VMware version 2 and Snow Leopard on my iMac.  Thank you.

  onemulligan wrote:

  I use Fusion 2.0 (116369) and a version of snow leopard 10.6.2 iMac.

  Fusion 2.0 (116369) is not compatible with Snow Leopard and you should spend at least VMware Fusion 2.0.6 (free upgrade) or VMware Fusion 3.0.1 (paid upgrade).

• Can not get the camers to work

  original title: ca ot get the camers to work

  Cannot get the camera memory card to work

  Please explain exactly what you have already tried.

  The info might be worth a visit:

  Apparently, you have an external or internal USB media player?

  Insert the memory card into the correct location on the media player...
  If open windows... Close them.

  When the card is inserted... If you go to... Start / computer... is
  player card on one or several removable disks?

  Removable (e :)) drive
  Removable disk (e :))
  Removable drive (g)

  If_Yes_you can download photos from there. Left click
  the drive letter that corresponds to the SD card slot should
  display the directory of the card and you can copy and paste or
  Drag and drop the photos of your choice in a folder on your hard drive
  drive.

  Just a select group of photos do a right-click and choose... Copy...
  then navigate to the folder that you want, and then right-click the
  folder and choose Paste.

• Can not get MK6026GAX HDD to work

  Help, please

  I use a Toshiba MK6026GAX hard drive in an external USB drive chassis. I can get the HARD drive to work t.

  Windows is looking for a driver for the above HARD drive but can not find the driver.

  Concerning

  Hello Johan

  The faulty HARD drive is?
  Are you trying to use with Toshiba notebook or what?

• can not get the updates to work error 0x802400a

  can't get updates to work the error code, 0x802400a

  SP3 is installed?

  How to obtain the latest Windows XP service pack
  http://support.Microsoft.com/kb/322389

  Steps to take before you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950717