moving to a different database schema (datapump or?)

Similar Questions

• User IMP in a different database schema

  Scenario of
  =====
  Oracle 9i Enterprise Edition (9.2.0.8)
  Windows Server 2003 (32-bit)
  --- to ---
  Oracle 11g Enterprise Edition (11.2.0.3)
  Windows Server 2008 R2 Standard (64-bit)
  
  
  Hi all
  
  I'm doing an upgrade from 9i to 11g and I use native imp/exp to migrate these data... I exported 9i patterns in a dmp file and I'm goiing to export in 11g. Database 11g is a new database with any of the existing patterns...
  
  My newbie question is "should I manually create these schema exact 11g and their tables before importing data? If so, there are many diagrams and objects to create... one by one... This is the tedious problem that I face...
  Is there a work around that? Thank you.

  Hello
  Exp/imp old creates no users unless you do a 'full' export (10 g impdp/expdp will do that for exports of level diagram). You need to first create all users if you exported from a list of schemas. Is it possible to export as "comprehensive"?

  Kind regards
  Rich

• JCA database adapter issue because of the dependence of database schema

  Hello
  
  I use the database JCA adapter to call a stored procedure. The adapter uses the schema of database name while calling the stored procedure. The schema name is added to the namespace XSD, wsdl files.
  If I have to use a different database schema name, how can I change the code without a lot of change.
  
  Thank you!

  You can change this property in the JCA file

• How to choose the scheme of work of a different database instead of the database target

  Hi everyone, can you please answer to my problem.
  
  Q1.is it is mandatory that the two target schema schema and work must present in a database.if not then How to choose the scheme of work of another data base instead of target database schema. Please suggest.
  
  __Description__
  
  My work, my work patterns in odi's in a database schema and target in a different database,
  Now I'm dataserver with identification of the target or credentials of scheme work information.
  Here's the problem.
  
  I can't see scheme of work in the drop-down list when you create the physical schema with data server with the credentials of the target.
  
  It's obvious that he cannot show the workschema which presents in an another database.because - database server has the schema of the target database credentials.
  
  Vice versa
  
  Please suggest
  
  Concerning
  Chantal

  Hello

  Your KM will create the tables for working in the schema, you write to and that's why you have the problem:

  create table< %="odiRef.getTable" ("l",="" "int_name",="" "w")="" %="">

  I don't know of an option to replace this 'W' that will say 'go and get work in the staging area, I've specified.

  I guess that you can customize the KM and pass all the commands to Execute on the Source tab, or I guess you could specify the schema for each of the steps to be the logic diagram of the various staging areas.

  BUT I don't know if it would work throughout and I think it will create a massive Mount of work unnecessarily.

  Is there a decent reason why you can not have the staging area on the target?

• Can I plug a tablespace in a different database?

  Version:11.2.0.3/RHEL 5.8

  We have a database of non-prod with a weekly backup of level diagram using datapump. This DB contains patterns QA which is essential to our versions of the product.

  The system tablespace data file has been corrupted. After the last logical backup taken with expdp 5 days back, many changes were made for business schema objects. Then, restore the dumpfile expdp scheme will be a great help.

  We have a critical QA scheme called LMFS_QA that uses a tablespace (LMFS_QA_DATA) with 4 data files. All data files were fine when the DB went down because of the corruption of the system tablespace.

  Is there anyway that I can plug this tablespace in an another healthy database after the user LMFS_QA was created in the DB?

  Is there anyway that I can plug this tablespace in an another healthy database after the user LMFS_QA was created in the DB?

  Sorry to say but the short answer is no.  You can not just plug these data files to a different database.

  No doubt you are any rman backups, or you wouldn't be asking this question?  Critical databases must be in archivelog mode and backup using rman.

  Use your file expdp and re-apply your changes.

  Are there no way to recover your database "corrupt"?  You have connected a call with Oracle?

• Working on the different database configuration repository

  Hello
  
  I'm putting my deposit of work make a diagram on a different database to the root of the source.
  
  Currently when I change the data source server and you try to set the repository of work have only the option to select patterns in the source.
  
  I have my deposit of work on a different database.
  
  Can anyone help?
  
  Kind regards
  
  
  CM

  I came to a conclusion that there was confusion about the terminology. What you call "Reference work" is actually a "scheme of work" in your particular case.

  Then the answer is that the scheme of work must be on the same server as your schema of the Source data.
  Here's a reasoning behind this:
  This scheme consists of the temporary/intermediate desks that are generated by ODI knowledge modules.
  These work tables are similar to the tables in the schema of the source data and structure
  Data are moved, copied, and a comparison between source and work patterns, it makes more sense to store them on the same database server to avoid overloading the network and communication.

  That's why ODI ensures that the schema of the source and the scheme of work exist on the same database server.

  P.S. 'Repository of work' is the metadata repository that contains the data model definitions, code ODI, packages, interfaces, etc.
  He works in tandem with the "master repository.

  Hope this helps you.

  If you think that your question has been answered, please check the question as answered and the answers you received as useful or appropriate.

  Thank you

• How to use references from web third party service with service Cloud Computing to Oracle database schema

  APEX 5.0

  Cloud Computing service for the Oracle database schema

  
  

  I'm in the middle of do a proof of concept.  Basically, I need an application with security of the stored data, UI, user, data loading, and able to post data via an external web service said.  It seems that with the database schema Oracle cloud service, it is not possible to use web service references that are not in the field.

  If I try to use a service via http reference, I get:

  ORA-20987: APEX - the requested URL was forbidden. Contact your administrator. -Contact your administrator of the application.

  If I try to use the same reference service via https, I get:

  ORA-29273: HTTP request failed

  ORA-06512: at & quot; SYS. UTL_HTTP & quot; line 1130

  ORA-29259: end-of-input reached

  I read somewhere that cloud services only https can be used.  Is this true?

  And then I read somewhere to use the protocol https, the portfolio must be configured to store certificates, etc.  However, I read somewhere else that the portfolio cannot be configured because there is no access to the instance database with the Oracle Cloud Computing database schema service.  Is this true?

  If both are true, how can I make a call to post data to an external web service?  Or do I need to use a different Cloud Computing service?  Or do I need my own instance of Oracle DB?

  Any help would be great.  Thank you!

  It turns out there was a problem with the remote rest service.  After successfully calling a rest service that was created using SQL Workshop, I tried different remote rest services and they all work.  Sorry for the confusion.  I thought it was very strange that the schema of database service wouldn't be able to do it easily.

• How to create a Pool of connections to two different databases in OBIEE

  Hello

  I have a requirement where few reports coming from databases and a few others to another database. I created two pools of connections and added the frame connection details. But when I created the report I get error as below.

  State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error occurred. [nQSError: 43113] The message returned by OBIS. [nQSError: 17001] Oracle error code: 942, message: ORA-00942: table or view does not exist to the call of the OCIStmtExecute OIC. [nQSError: 17010] Prepare the SQL statement failed. (HY000)

  Now, I would like to see if I can create a pool of connections to two different databases. If so, how that happen.

  Thank you!

  Hi Antonio,.

  Cross database joins are possible, no problem for it. But you do not do so in an object of unique data base in the physical layer using 2 pools of connections connection to the source A and B, then adding objects to A and B children of your unique database.

  You create 2 databases in the physical layer, each with its own connection pool, then you can do your knuckles crossed on the physical schema.

  As a picture is worth a thousand words, take a look:

  

  The physical diagram uses objects of A and B and define the rules of the join between them, it is a cross-database join. But in the physical layer of the database A and B are 2 separate objects each with its own pool of connections.

• APEX on a database by using a different database security

  I'm new to APEX so please forgive me if my question is elementary or if it crosses also ignoring.  My organization uses APEX for the first time and you are looking to fill a specific role.  I don't know if we want APEX can be done.

  Here's what we want to do:

  We want to create an app of the APEX on A database.

  My APEX application will be used to modify database tables b.

  Users have usernames, passwords and access set up on the basis of data B.

  When users access the application of APEX, we want the application to use the database security B.  In other words, it connects using the IDs and passwords for database B.

  So:

  I go to the application of the APEX

  He invites me to the user ID, I enter one I use when I log on database B.

  He asks me a password, I get the one I use with database ID B.

  I click OK.

  Forms are loaded with the data accessible by my ID on the B database.

  Changes on the forms and my user ID is marked as one making changes to database b lines.

  In other words, I just want to use the database A to build and enhance the application.  Anyone can run the application, but they must connect using their database B ID and password to make changes.

  (1) is it possible?

  (2) how to configure in the application of the APEX?

  Thanks for your help on this.

  8dc1e333-95ad-4714-9820-16d3e4296c4d wrote:

  In other words, I just want to use the database A to build and enhance the application.

  APEX does not work like that.

  APEX is nothing more than a bunch of PL/SQL code that runs on the database, it is installed on and run the code as "pattern analysis".

  Comment on "works on the basis of data"

  If you want APEX to read data from a different database, you use a DATABASE LINK

  for example to SELECT a report

  Select * from scott.emp@db2

  I doubt that one of the assistants APEX you'll love.

  comment "works like «pattern analysis"»

  If your application has an analysis of 'BOB' scheme... all SQL and PL/SQL code will run as BOB.

  The "DB"account "security" is more a misnomer.  APEX only checks that the entered name and password match that of the database that it is installed on.

  Once verified, APEX performs a 'switch user' for the 'scheme of analysis. "  (Authentication of proxy in Oracle)

  That's how web applications work... they use a shared schema.

  WORK AROUND

  Connect to the APEX by ADR, no EPG.  Will prevent it people to access the database directly.

  The next thing that you need is a SCHEME of ANALYSIS dedicated to the execution of SQL and PL/SQL.

  As any other database USER, it shouldn't be the same schema as the schema that contains all of your data. (Analysis schema! = data schema)

  Personally, I like to my 'space work [schema]' separated also.

  You will most likely need to use a database of private virtual control data access.

  Required Code changes

  If none of your code using the username 'USER' column, you need to change to COALESCE (V ('APP_USER'), USER)

  (I prefer to COALESCE on NVL because I anticipate different infrastructure that works similar to APEX)

  MK

• How to read the data with different XML schemas within the unique connection?

  • I have Oracle database 11g
  • I access it via JDBC: Slim, version 11.2.0.3, same as xdb.
  • I have several tables, each has an XMLType column, all based on patterns.
  • There are three XML schemas different registered in the DB
  • Maybe I need to read the XML data in multiple tables.
  • If all the XMLTypes have the same XML schema, there is no problem,
  • If patterns are different, the second reading will throw BindXMLException.
  • If I reset the connection between the readings of the XMLType column with different schemas, it works.

  The question is: How can I configure the driver, or the connection to be able to read the data with different XML schemas without resetting the connection (which is expensive).

  Code to get data from XMLType is the implementation of case study:

   1   ResultSet resultSet = statement.executeQuery( sql ) ; 
   2   String result = null ; 
   3    while(resultSet.next()) { 
   4   SQLXML sqlxml = resultSet.getSQLXML(1) ; 
   5   result = sqlxml.getString() ; 
   6   sqlxml.free(); 
   7   } 
   8   resultSet.close(); 
   9    return result ; 
  

  It turns out, that I needed to serialize the XML on the server and read it as BLOB. Like this:

   1    final Statement statement = connection.createStatement() ;  2    final String sql = String.format("select xmlserialize(content xml_content_column as blob encoding 'UTF-8') from %s where key='%s'", table, key ) ;  3   ResultSet resultSet = statement.executeQuery( sql ) ;  4   String result = null ;  5    while(resultSet.next()) {  6   Blob blob = resultSet.getBlob( 1 );  7   InputStream inputStream = blob.getBinaryStream();  8   result = new Scanner( inputStream ).useDelimiter( "\\A" ).next();  9   inputStream.close(); 10   blob.free(); 11   } 12   resultSet.close(); 13   statement.close(); 14  15   System.out.println( result ); 16    return result ; 17
  

  Then it works. Still, can't get it work with XMLType in resultset. On the customer XML unwrapping explodes trying to pass to another XML schema. JDBC/XDB problem?

• Access to the database/schema to another server...

  Hello - I have a need that will require me to access additional information about a schema on a server that is different from what my APEX installation runs on (IE 3rd part of the data that is not part of the inherent schema that accesses the APEX)...
  
  My APEX server running version 3.2.1.00.11 on top of oracle 11 g Enterprise Edition Release 11.1.0.7.0 - 64 bit Production. We will call this server "A".
  
  The target server is currently an Oracle server, but will eventually migrate to a Teradata installation (no - I have no word to say in the matter!). We will call this server 'B '. No idea what versions in both cases.
  
  I understand that if I needed to access different patterns on the same server (IE Server A) it would be easy enough to do using grant statements.
  
  Also, I understand that to access a schema on server B, I could use a DBLink to do.
  
  My questions are:
  
  (1) oracle allow a DBLink to teradata? I found the following thread that seems to indicate that it is possible (or at least used to be - don't know if it's still a valid configuration) Re: Teradata to Oracle connection
  
  (2) is there another way to make this available external data source? A tech in our team 'Architecture COMPUTING"said DBLinks are not recommended or a best practice. He proposed adding the data source 'directly '?
  
  This thread (add multiple schemas in a workspace seems to speak of adding multiple schemas to a workspace, but I do not have access to this part of our oracle server (I'm only a workspace administration).)
  
  (3) if I create a view that accesses the tables through the DBLink to Server B when it comes to Oracle, and then update the DBLink to point to the new teradata server during the migration happens - it will break anything within the APEX?
  
  My hypothesis is that the table names are the same concerns only APEX that the view is valid and not what fuels the view.
  
  
  The rationale against using DBLinks gave me was that "it is not sensible for APEX down to the oracle database (its native underlying server/schema) to cross to another server and return to the oracle database that then went up to the APEX." It makes more sense for APEX to go straight to the other source of data. Normally, I would say that they (Apex/infrastructure) are the same server so it does not really matter that he might have to go through additional 1 'service' or 'interface', but this area is not my specialty.
  
  Also - I think that technically speaking our APEX service is already separated from its native schema/data on different servers (for load balancing), so in this case really maybe a middle Server Getting (IE Server APEX A-> native schema/data of the server where the DBLink might be-> server B) do an unnecessary extra jump (APEX Server A)-> server B. Note : I am sure that our architect does not know that this is the case, then it is not part of its raison d'etre.
  
  Thoughts?
  
  Thank you!
  Jim

  (1) there is a wide variety of databases that you can access from Oracle using the links to the db. The main purpose of a db link must provide connectivity between databases that are not consistent with the use of a certain type of driver or translator. Some databases provide native connectivity with other thing than their own products.

  (2) I would ask another dba from this source that he or she recommends, and if he or she has all the documentation. The long and short of it is (as I explained above) few providers of database provides native support for other database engines, which is needed for the kind of "direct connection" implies that person. My suspicion is that this person is an ODBC user and is equivalent to the use of ODBC drivers with "direct connection", which is far from accurate. ODBC only provides a generic interface to a database, at the expense of speed, functionality and efficiency thanks to the translation of the command and overhead.

  (3) oracle generally doesn't care about the back end of a connection to a different database and neither does APEX. As long as you can build a database to the database in question, shouldn't you have any problems ask these data, although only in a reduced performance due to air travel, networking, drivers, etc.

  Really, APEX is intended to be run against and integrates better with Oracle databases. If your main data is on another platform, APEX may not be the best solution for your needs.

• Execution of the SQL query through 2 different databases to Oracle

  Hi all
  
  In Microsoft SQL server, we can run on 2 different databases depending on the type of SQL query:
  
  Select * from TEST1.dbo.GENERIC_TABLE1 union select * from TEST2.dbo.GENERIC_TABLE2;
  
  Test1 and TEST2 here is 2 different databases.
  
  Can we do the same in Oracle?

  Of course you can do it.
  Create a [database join | http://www.stanford.edu/dept/itss/docs/oracle/10g/server.101/b10759/statements_5005.htm] from DB1 to DB2.

  Grant select on the tables of the DB2 schema with which you want to connect.

  And then, you can you can query as

  select * from DB1schema.emp
  union
  select * from emp@dblink_name;
  

• How to create views of data from different databases tables in2

  Using Oracle 10.2 g
  
  I have 2 databases Gus and the haggis on schema Comqdhb.
  
  Glink indicates a link of database between Haggis and Gus
  
  In Gus, there is school that contains columns with same name upn, grade, subject, student of tables...
  
  STUDENT
  UPN
  academicYear
  
  Object
  
  Object
  
  GRADE
  examlevel
  grade
  
  SCHOOL
  SN
  
  In HAGGIS raising tables, grade, teacher containing columns upn... desc below.
  
  STUDENT
  UPN
  
  GRADE
  grade
  UPN
  academicyear
  level
  
  
  
  Create views in your database HAGGIS who join their all the qualities of the review. You should have a point of view that will produce the following relationship:
  examGrade (upn, subject, examlevel, sn, rank, academicYear)
  
  So I need to create a view that gets the data from the tables in the databases.
  
  create view as examGrade (upn, subject, examlevel, sn, rank, academicYear) like some s.upn
  
  
  But I don't get the selection of a column of 2 tables in different databases
  
  I mean if I said
  
  Select the UPN in comqdhb.student@glink,comqdhb.student;
  Select the upn name in comqdhb.student@glink,comqdhb.student
  *
  ERROR on line 1:
  ORA-00918: column ambiguously defined
  
  Help me, thank you.

  Hello

  Rider wrote:
  The issue is that I can't understand that I should create the view by the union of the haggis and the two gus data or only haggis.
  the reason I believe I need to combine the two is mentioned * "" create views in your database schema HAGGIS who join their all the qualities of the review. ". *
  By the mention of creating views and who join their all the qualities of the review, it probably means to obtain the data of the GUS and HAGGIS.

  This is my interpretation of the assignment, too.
  If you ask just the tables on Gus, you will get the ranks of three of the four schools: it's not all examination classes.
  If you ask just the tables on Haggis, you will get the ranks of any of the four schools: it's not all examination classes.

  2nd prob is that if have decided to create a view that gets the data from these two gus and therer haggis would be a lot of duplication involved due to the cross product

  Why would there be "repetition involved due to the cross-product"?
  If the quuery of Gus produces 100 lines, the request of product Haggis 30 rows, then the UNION of the two will have 100 + 30 = 130 lines (assuming, as you say, each student is at school only one).

  the query I wrote is

  Create view examGrade (upn, subject, examlevel, sn, rank, academicYear)
  as
  Select distinct s.upn as upn, g.subject as topic,
  g."LEVEL" as examlevel, g.grade as rank, to_number (g.academicyear) as academicyear
  of s comqdhb.student, comqdhb.grade g
  s.UPN, sb.subject, g.elevel, g.grade, s.acyr select Union
  of comqdhb.subject@glink sb,comqdhb.student@glink s,comqdhb.gradevalues@glink g;

  You should not write, not to mention not formatted zip code. I have a little time I can devote to answering questions in the forum. Do you want me
  b spend this time formatting your code, so I can understand the question, and no time to answer, or
  b spend only a little time reading understanding your code and spend most of my time to help you?
  I would prefer (b), but the choice is yours.
  See the statement that I posted in my last post for an example of the formatted code. You see how it appears in a box with a police fixed-width, and multiple spaces are printed? This is because I typed {code} (all small letters), before and after the section I wanted formatted.

  At least put each table in the FROM clause on a separate line, so it is easy to know if you have enough join conditions.
  If you have N tables in the FROM clause, you almost always have at least N-1 join conditions that specify how the tables are linked together. For example, if talk you about two tables, quality and student, you expect to see a join condition that tells you when you have data in a table, how to find related data in the other table, such as

  g_gus.upn = s_gus.upn
  

  No no no join conditions will cause "repetition involved due to the cross product.

  I downloaded my info here
  http://www.upload4free.com/download.php?file=44201983-School_ExamGrades.PDF

  
  http://www.upload4free.com/download.php?file=184648736-ExamGrades_Case_Study_2008FINAL.PDF

  Sorry, if there is data as long as you can't post here, there is much too much for me to read.
  Make a sample set, containing a few (maybe five) students and a few shades of each student. It is fine to copy a few lines of your actual data.

  That's all the time I have for today. I can't wait to get the data and formatted requests.

• How to choose a database schema to use for a file of sequence?

  I have several database schemas on my TestStand system, and when I select a movie file that I need to position the schema for the results entered into the database correctly.
  I use a SequenceFileCallback for DatabaseOptions in my file of sequence and in that, I set Parameters.DatabaseOptions.DatabaseSchema.Name = 'xyz', where xyz is the name of database schema to be used. It does not, and it reports an error that it cannot be loaded or the file is maybe damaged. This feature works, or should I just a mistake in what I put this equal to?

  Evan... It turns out that your last point: 'Make sure you use quotation marks around the name of schema, no simple markings as in your message.', has solved the problem. Funny it did not report a single error with the brands. Thanks for the quick response! PLF

• Oracle Cloud Service database schema... Apex Cloud_Scheduler &amp; E-mail procedure

  Professional Hello, etc. of users experienced Apex.

  I am currently using the oracle database schema cloud service, which is related to my extension service java saas.

  I have a requirement to send reports to certain accounts of e-mail per day. Hence the need to use the CLOUD_SCHEDULER API, APEX_EMAIL API and a custom "Get_REPORT"... return blob function to convert the sql result set to CSV file to be attached to e-mails.

  1 function GET_REPORT returns the BLOB as the query results set CSV file. Autonomous œuvres

  2. I created the 'SENDEMAIL' procedure that accepts the responsibility of the sender and receivers email address, subject and a BLOB (GET_REPORT) to be attached to the email. And sends APEX_MAIL. PUSH_QUEUE. : This method works stand-alone.

  3. I created the "ScheduleCSVToEMAIL" procedure that accepts the e-mail to, from, cc, tablefiltertext, tablename: this procedure combines 1 and 2 as below...

  SQL_TEXT := 'SELECT * FROM '||TABLE_NAME||' WHERE ' || SQL_FILTER ||'';
  REPORT := GET_REPORT(SQL_TEXT);
       SENDENDVI_MAIL2(TO_ADDR,COMMA_CC, FROM_ADDR, EM_TITLE,EM_TITLE,null,null,REPORT,null);
  

  above works fine when run standalone.

  4. I created CLOUD_SCHEDULER PROGRAMS as below

  BEGIN
    CLOUD_SCHEDULER.CREATE_PROGRAM(
    program_name => 'emailtest1',
    program_action => 'SENDENDVI_MAIL3',
    program_type => 'STORED_PROCEDURE',
    number_of_arguments=>10, enabled =>false
    );
    CLOUD_SCHEDULER.DEFINE_PROGRAM_ARGUMENT(
    program_name => 'emailtest1',
    argument_position=>1,
    argument_type=>'VARCHAR2',
    DEFAULT_VALUE=>'[email protected]'
    );
    CLOUD_SCHEDULER.DEFINE_PROGRAM_ARGUMENT(
    program_name => 'emailtest1',
    argument_position=>2,
    argument_type=>'VARCHAR2',
    DEFAULT_VALUE=>'[email protected]'
    );
    CLOUD_SCHEDULER.DEFINE_PROGRAM_ARGUMENT(
    program_name => 'emailtest1',
    argument_position=>3,
    argument_type=>'VARCHAR2',
    DEFAULT_VALUE=>'[email protected]'
    );
    CLOUD_SCHEDULER.DEFINE_PROGRAM_ARGUMENT(
    program_name => 'emailtest1',
    argument_position=>4,
    argument_type=>'VARCHAR2',
    DEFAULT_VALUE=>SYSDATE||'_ENDVI_VH_INSURANCE'
    );
    CLOUD_SCHEDULER.DEFINE_PROGRAM_ARGUMENT(
    program_name => 'emailtest1',
    argument_position=>5,
    argument_type=>'VARCHAR2',
    DEFAULT_VALUE=>null
    );
    CLOUD_SCHEDULER.DEFINE_PROGRAM_ARGUMENT(
    program_name => 'emailtest1',
    argument_position=>6,
    argument_type=>'VARCHAR2',
    DEFAULT_VALUE=>null
    );
     CLOUD_SCHEDULER.DEFINE_PROGRAM_ARGUMENT(
    program_name => 'emailtest1',
    argument_position=>7,
    argument_type=>'VARCHAR2',
    DEFAULT_VALUE=>null
    );
     CLOUD_SCHEDULER.DEFINE_PROGRAM_ARGUMENT(
    program_name => 'emailtest1',
    argument_position=>8,
    argument_type=>'VARCHAR2',
    DEFAULT_VALUE=>null
    );
     CLOUD_SCHEDULER.DEFINE_PROGRAM_ARGUMENT(
    program_name => 'emailtest1',
    argument_position=>9,
    argument_type=>'VARCHAR2',
    DEFAULT_VALUE=>'G_EMAIL_VH_INSURANCE_INFO'
    );
    CLOUD_SCHEDULER.DEFINE_PROGRAM_ARGUMENT(
    program_name => 'emailtest1',
    argument_position=>10,
    argument_type=>'VARCHAR2',
    DEFAULT_VALUE=>null
    );
    
    CLOUD_SCHEDULER.ENABLE('emailtest1');
  END;
  

  and

  BEGIN
    CLOUD_SCHEDULER.CREATE_JOB('emailtestrun1', program_name=>'emailtest1');
    CLOUD_SCHEDULER.SET_JOB_ARGUMENT_VALUE('emailtestrun1',1,'[email protected]');
    CLOUD_SCHEDULER.SET_JOB_ARGUMENT_VALUE('emailtestrun1',2,'[email protected]');
    CLOUD_SCHEDULER.SET_JOB_ARGUMENT_VALUE('emailtestrun1',3,'[email protected]');
    CLOUD_SCHEDULER.SET_JOB_ARGUMENT_VALUE('emailtestrun1',4,SYSTIMESTAMP||'_ENDVI_VH_INSURANCE');
    CLOUD_SCHEDULER.SET_JOB_ARGUMENT_VALUE('emailtestrun1',5,SYSTIMESTAMP||'_ENDVI_VH_INSURANCE');
    CLOUD_SCHEDULER.SET_JOB_ARGUMENT_VALUE('emailtestrun1',6,NULL);
    CLOUD_SCHEDULER.SET_JOB_ARGUMENT_VALUE('emailtestrun1',7,NULL);
    CLOUD_SCHEDULER.SET_JOB_ARGUMENT_VALUE('emailtestrun1',8,NULL);
    CLOUD_SCHEDULER.SET_JOB_ARGUMENT_VALUE('emailtestrun1',9,'G_EMAIL_VH_INSURANCE_INFO');
    CLOUD_SCHEDULER.SET_JOB_ARGUMENT_VALUE('emailtestrun1',10,NULL);
    CLOUD_SCHEDULER.ENABLE('emailtestrun1');
  END;
  

  Above, executed but it obviously it didn't, I asked the table "USER_SCHEDULER_JOB_RUN_DETAILS" and I got the reason of failure below.

  ORA-20001: This procedure must be invoked from within an application session. ORA-06512: at "APEX_040200.WWV_FLOW_MAIL", line 339 ORA-06512: at "APEX_040200.WWV_FLOW_MAIL_API", 
  line 97 ORA-06512: at "F1ZKNWJD2RE1.SENDENDVI_MAIL3",line 56
  
  

  Please help what I do to get my work requirement.

  Note: I already tried to use the Scheduler in the format below, who gave the same result

  BEGIN
    CLOUD_SCHEDULER.create_job (
      job_name        => 'ENDVI_AUT_EM_ROCKET',
      job_type        => 'PLSQL_BLOCK',
      job_action      => 'BEGIN SCHEDULE_CSV_EMAIL(''G_EMAIL_VHROCKETDETAILS'',''[email protected]'',''[email protected]'',''[email protected],[email protected]'',NULL,SYSTIMESTAMP||''_TEST SCHEDULE_CSV_EMAIL'',NULL,NULL,NULL); END;',
      repeat_interval => 'FREQ=MINUTELY; INTERVAL=3;',
      enabled         => TRUE);
  
  
    CLOUD_SCHEDULER.set_attribute (
      name      => 'ENDVI_AUT_EM_VH_INSURANCE',
      attribute => 'max_runs',
      value     => 20);
    CLOUD_SCHEDULER.enable(name => 'ENDVI_AUT_EM_VH_INSURANCE');
  END
  

  Right answer

  Hi oladslw,

  You must perform an additional step before calling the API APEX_MAIL outside an Application Express application. Two ways to achieve this are described in the APEX_MAIL documentation (see first Note) and in the APEX_UTIL documentation. Another way is:

  for c1 in ( select workspace_id
                from apex_workspace_schemas
               where workspace_name = sys_context( 'userenv', 'current_schema' )
                 and rownum = 1 ) loop
      apex_util.set_security_group_id( p_security_group_id => c1.workspace_id );
  end loop;
  

  The code above retrieves your workspace_id of the dictionary of the current schema-based APEX of (your), then sets the security context of APEX. After that, you will be able to call APEX_MAIL in a same database session.

  Thank you

  Vlad