MPEG 2 video with audio multi-channel broadcasting

Similar Questions

• You can link Audio to any video online of time so it works as if you imported a video with audio?

  Hello...

  I have the video and I recorded also outwardly audio to synchronize with it. Now, I understand that you can drag the video (remove audio sound if there a) then drag an audio clip in the timeline and place it under neath it. I can get it in sync and all this very well.

  The problem I have is that it is cumbersome to change like that. When you import a video with audio integrated if you make a cut, she cut the video AND the audio attached to it at once. If you do it the way I do now you must add additional discounts on the audio file as well. If you double the clicks needed to edit. Also when you are deleting clips and dragging the things about you must be very careful to make sure that the audio and video remains synchronized.

  What I hope is a way to "join" the audio to video with over the addition of a long and tedious process of rendering out to embed a video file with it.

  Solutions, I tried and failed.

  GROUP: That seams like the obvious to make thing... If I consolidate them, I can select them as one, move them as one... but if I select the cutting tool it cut more than video or audio... not both.

  SEQUENCE: The other option I've tried is once it is synchronized, I do a new sequence and add the sequence with the video and sync audo and then change on it. I'm not modify a sequence not the raw audio and video. The problem here is that, while now the cutting tool cuts both video AND audio at the same time and I can also move and edit easily... the problem is that now the dose of waveform appears not in the audio when extend you. It's just a big box of green white (even if there is no audio in the original sequence)

  Any ideas?

  Thank you

  In the timeline panel, select the audio clip and video clip. Go to the menu video > link.

  MtD

• Movie Maker import my. MPG video with Audio only

  My OS: Vista Business 32-bit
  My Movie Maker: Version 6.0

  I have a video file of 4.4 GB of a recent trip.  It's on my Motion LE1700 Tablet PC to the .mpg format.  If I click on the file, the video and audio both appear.

  My problem: when I import into Movie Maker (by clicking on 'Videos' under 'Import' to the left of the screen) if I can edit and publish later, the properties end up the show as an audio file under 'source '.  It only allows me to drop - drag the file into the audio part of the timeline, and I can't see the video when I play (I can hear the audio).

  What I am doing wrong?

  Thanks for any help.

  Movie Maker has problems of compatibility with the MPEG files...
  It may be interesting to try to convert the MPEG for the WMV file
  format before you import into Movie Maker.

  There are many programs that can do conversions...
  The following freeware is an example...:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory
  http://www.videohelp.com/tools/Format_Factory
  (the 'direct link' is faster)
  (the file you want to download is: > FFSetup260.zip<>
  (FWIW... installation..., you can uncheck
  ('all' boxes on the last screen)

  First, you will need to decompress the file or just open the
  Drag FFSetup260.exe out of the folder
  and drop it on your desktop. To install left click.

  Next, after the download and installation of Format
  Factory... you can open the program and
  left click on the toolbar, the "Option" button and
  "Select an output folder to" / apply / OK.
  (this is where you find your files after they)
  are converted)

  Drag and drop your video clips on the main screen...

  Select "all to WMV" / OK...

  Click on... Beginning... in the toolbar...

  That should do it...

  Good luck...

• How to make an animated gif video with audio

  Hello everyone,

  I want to like this. Can someone tell me how to do,

  How to make an animation, a video with GIF images for example https://www.youtube.com/watch?v=DjecV8NGSEY or see thishttps://www.youtube.com/watch?v=WFoJndDNevs How do like this clip?

  Do you have any video from youtube on how to do?

  Thank you.

  If you ask how to create videos like this, it is very easy. You just need to learn how to use the basics of After Effects.

  Getting started with After Effects

• Synchronization of a live video with audio digital SLR and a separate audio track

  Hi, I have a problem with live video that I try to sync with a separate audio track. I have several clips that I want to include in the video, so I don't want to sync the audio frame video and separate framework, but I want to know the best possible way, please, I can sync the audio separated? So far I used markers of the waveforms to find the synchronization point, but so far it is not synchronization.

  I hope someone can help?

  Thank you

  Joe.

  Adjust the audio clip left or right of the track until it syncs to the top.  In the context menu for the sequence, you can display Audio Units, if you need less than a precision of image.

• I can't drag videos with audio in an existing sequence

  This is starting to get boring... No matter what type of file, it is, but the audio is not transferred in the project with the video.

  The only work around is to make a new composition with the video file, copy and paste it into the sequence of in origin, I wanted to only it.

  I don't think it's an arrangement... I think something has changed with a software update... First Pro 2014... or maybe where the project file is too big?

  In fact, I think that he has done this for a while, but less frequently...

  Then it starts to get boring I have movie files and sequences on each side.

  The source of the track is patched. (A1 on the far left)

  This is required for inserts and replaces them.

• Importing video with 2 audio tracks

  Hello

  I've saved my computer with Action Mirillis screen! that allows me to record several audio tracks (in my case: the sound of the computer in 1 audio track + my voice through an external microphone in a second audio track)

  When I open the MP4 file in VLC, I can manually switch between 2 tracks, it's great workign.

  But when I want to import the video file in first pro, it only shows me that the 1st song (the sound of the computer) and it is impossible to get the 2nd audio track

  Yes I can demux with avidemux or virtualdub (even if I have some problems to import .wav in first) but I would have preferred a "cleander" option to get my track

  (I said it's 2 separate audio tracks, is not 1 stereo track with L = his computer and R = my voice)

  Windows 7 64 bit + Adobe Premiere Pro CS6

  Thanks for your help guys, I hope I will get some

  Guillaume

  lol bad advice for CC being able, sorry. I tried both, but found my sample not as I thought. What I saw in a CC project was a sequence with an audio multi-channel which must have been in a preset, and I thought it was a new automatic sequence. I won't go in depth about my mistake, but please, do not assume that CC will solve unless someone can fix.

  When it comes to the audio of your Sony Vegas. If it's anything like the first, I disable the video track, mute the audio track top and export only the background audio track that you don't see at first. After that only import the audio into first and place it under what you already have.

  Regarding the future, the next time - would be a voice on track help, after your first record?

• Cannot create the multi channels Tx two USRP-2943Rs Session with driver

  I have problems of implementation of several USRP-2943R devices in tranmist both of their channels at once.  Right now my configuration is a configuration of four chains composed of two devices of RIO.  I am only able to transmit at the same time successfully CH0 and CH1.  I'm creating a session using two devices and my aim is to perform Tx on CH0 via CH3.  In addition, my goal is to use the LabVIEW driver without any synchronization, because I test fix synchronization through post-processing and you want the VI be as simple as possible without the hassle of FPGA programming. I realize has the Simple models OR - USRP Streaming Sync in LabVIEW, but additional synchronization and FPGA programming is too much for such a simple project like mine which would require no synchronization USRP.

  My VI and some screenshots of the error messages resulting is attached.  I am able to succesfully implement multi-channel Rx deals and attached is my multichannel Rx VI.  My question is why I can open and operate a session of Rx mult-channel without problem, while a multi-channel Tx session will give me errors?

  My final goal is to merge my multichannel work Rx VI with a mult-channel Tx VI work for measurements in order to test some synchronization post-processing routines that are performed in Matlab.

  I think that I found a solution to my problem.  I thought to post it here to help others.  It is important to use some sort of device to synchronize several USRPs.  However. I found that you must reset the device by setting the node of reset function blocks that open and session Rx or Tx.  "" If it is not defined, then the ' niUSRP Signal.vi configurethe ID of the specified attribute is not valid for the scope specified (or channel)." error occurs, any circuits that you define.  After the node Reset true and place an empty string for my channels Enabled, all was fine.  Also, a full duplex system you will be only to first log of Rx with a reset of the device, followed by the opening of a session of Tx without a reset of the device.

  One more thing, it is that there seems to be a bug if you feed a Tx process a table whose number of lines does not match the number of channels Tx.  This will result in weird errors funny will disappear only after doing a hard reset of the units.  So, just something to take note of.

  I hope this information will help others and this message can be marked as resolved.

• No video with new channels such as CNN, MSN - never happened before - new computer

  All of a sudden there is no video with my news channels - CNN, MSN, etc... Everything is there but not video!

  try a system restore a few days back and see if things return to normal.
   
   
  Barb
   
  MVP - Windows/entertainment and connected home
   
  http://digitalmediaphile.com/
   
  Please mark as answer if that answers your question
   
   
   
   

• I interrupt my video and audio continues... If I'm still playing once it causes a headache. Help?

  This could be an easy answer, but I do my second video, so I'm not too well informed. Anyway, I imported my video with audio and it plays well back. So I play the video and put paused to try to synchronize the audio. The video stops, but the sound continues to play, and he will not stop until it has played. If I try to start from the beginning again to play the audio for the sort of ignore it, it overlaps just with original sound and noise resulting gives me a headache. I don't know if somehow, I can stop the audio part of the path, but if I can, that would be great. It would be much easier to sync. Thank you!

  You can add keyframes to layer with audio or it restarts the audio.

  Also, when you import audio in a layer, you must click somewhere in the layer (where you see the audio spectrum), glance at your properties panel, hit the sync menu drop-down and select workflow.

• Export DNxHD with 8 channels audio multi... Problem! the final file only stereo all mixed with 6 empty strings.

  I export DNxHD with 8 channels audio multi... My problem is that the final file all mixed in the first 2 stereo channels with the channels empty rest 6.

  I'm lost on what could be the problem.

  The main audio channel is 8 channels... NO stereo.
  Export, I chose DNxHD and audio 48000 Hz with 8 output channels

  
  What could this be? I need to deliver a film with the 8 mono channels.

  Really appreciate all the thoughts/help!

  Thank you

  Christian

  That's how I would implement mixer in CS6's using a sequence of 8 track with 8 mono channels (mono channels using maintains levels matching, stereo and standard tracks can cause differences in level of 3db). Note the Red output channel selection and the panpot position indicated in blue.

  

• How can I get multi channel audio via the HDMI port on an early 2015 MacBook Pro?

  I try to get the 7.1 audio channels to flow from my MacBook Pro to a cinema set up. The display works fine now I plug the HDMI in however the sound still Mac speakers. I checked the settings and no HDMI output is available. An airtime option is available, but that returns only two channels as a maximum to the receiver. When I go to the configuration of the source on the receiver it receives video at 1080 p 60herts however it is specifically stated No Audio from the Source.

  Also, I have connected my iPhone 6 s more using an Apple through the same HDMI cable adapter and it works perfectly. We also use HDMI with our PS4 occasionally and it works perfectly, even with the 3D.

  Thus, the MacBook Pro is early 2015 with an i5, the receiver is a Harmon Kardon AVR 2700 (we run 7.1 channels of this) and we are connecting via the HDMI port through a 50 ft HDMI before. The receiver sends the audio to a projector with 1080 p 60 hertz if it changes anything...

  Also if it helps the receiver supports dts - hd master audio decoding, Dolby True HD/Digital Plus decoding, HDMI 1.4 (HDMI is compatible 2.0), as well as multi-channel input and PCM and linear PCM.

  I use a "Behringer UCA202' audio device I bought on amazon.com for only $29.

  It works very well for the audio 5.1 or 7.2. Works connect optical toslink. Just plug it into a usb port on your Mac and a cable optical toslink to your AV receiver.

  My Yahmaha 7.2 audio/video receiver is measuring process the digital signal in THX, DTS, Dolby digital Pro logic, a cinema, etc.

  

• Cannot get DTS/multi channel audio via HDMI

  Hello
  I'm trying to connect my VAIO SVT15112CXS to my Bravia HDTV via HDMI to get multi-channel audio (DTS/DD) from my Bravia HT (connected to the TV via optical) with no luck at all.

  I have the same setup for PS3 works well, is it cable or equipment.

  I have already updated all the drivers.

  When the TV is not connected I don't get an Audio HDMI option in the playback devices (I checked to show disconnected devices / disabled) and when it is connected I do not get an option to change the configuration of stereo speaker.

  This way I get only Stereo sound.

  I tried passthough HDMI via ffdshow config (installed K-Lite codec pack) and there is no sound in this way.

  Is there a solution? something escapes me?

  Thanks to all in advance,

  Thanks for your time and your response.

  I got it actually work! updated drivers audio and video (not Sony ones sugested, but later of Intel and Realtek) and now I have everything works as it should.

  The only minor problem is that Vaio Care now wants me to go back to the previous version of the driver, but I'll just ignore it.

  Everyone, try this if you experience this problem.

• Videos with a resolution of portrait (1280 x 720) play with a black screen, audio is heard, in Windows Media Player 12 on Windows 7

  Hello

  I noticed that the video playback for videos (with a resolution of portrait, specifically 720 x 1280, appear black with audio being heard in Windows Media Player 12 (WMP 12) on Windows 7.  A Playbook has been used to capture video to the resolution of portrait.  I also noticed that if the Playbook capture resolution 1280 x 720 of the landscape, the video plays fine in WMP 12, so I know it is not a Codec problem and seems to be related to the dimensions of the video picture.

  The same portrait videos can be read normally with VLC and other video player applications.  Is this a known problem or limitation with WMP 12 on Windows 7?

  Thank you

  RS

  P.S. as an aside, Playbook captures video in MPEG-4 AVC video Codec and Audio MPEG-1 layer 2 Audio Codec format.

  Hello Rami,

  Thanks for posting your question in the Microsoft community.

  I understand that whenever you play a video (720 x 1280) Portrait format, it shows a black screen.

  To resolve this problem, we need to do some diagnosis so I would say that you check out the link and follow the steps.

  Open the troubleshooting Windows Media Player settings Troubleshooter
  
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

  Let us know if the store reports errors.

• I'm trying to export multi-channel audio as apple pro res 422 HQ, but the tracks are all coming full joint rather than separately. I've implemented the multi Channel sequence already. What I am doing wrong?

  I'm trying to export multi-channel audio as apple pro res 422 HQ, but the tracks are all coming full joint rather than separately. I've implemented the multi Channel sequence already. What I am doing wrong?

  All 4 titles are coming as complete blends not divisions. I guess that's a problem with the entrenchment of the channels, but can't see how to fix. Andy

  Is what would you say to my quick thought without following through all the processes after the fact, the sequence settings? My thought is that the sequence settings must be multichannel as you show, but each Adaptive track, so this channel map is routed at your leisure. If this is not the case, already, it would create a new sequence with these settings.

  I try to upload the photo